Configuring database
How to configure database for the entity bean in j2sdkee 1.3.1.
I like to use the SQLServer as the EIS,
Please give me instuctions about the changes that have to be made in the config folder.
Can i do the same work with Cloudscape Server,how to select a table information in Cloudscape server,how to create a seperate database,
anticipating reply
Dheeraj
http://www.google.com/search?q=cloudscape+documentation
Similar Messages
-
Sharepoint 2013 MP - Configuration Database connection failed
Hi all!
I run a WS2012 R2 with SCOM 2012R2. I'm trying to monitor Sharepoint 2013 Farm, with the Sharepoint 2013 MP. The Sharepoint farm and it's SQL server is on another domain, with two-way trust, and the agents are working on the Sharepoint and SQL servers.
I use SQL aliases for Sharepoint DB's, so I've made an override to the connection string to make it connect to the correct database.
The override is working fine, I can see that SCOM is trying to connect to the SQL server, but I cannot seem to make SCOM use the correct Run As account on these configuration databases. Most of the Sharepoint MP seems to be working fine, with the farm admin
account, but I don't know how I can force this override connectionString to use a specific user.
WS2012R2 with SCOM2012R2 UR3
Sharepoint 2013 Farm on WS2008R2 OS.
MS SQL 2012 on WS2008R2.
It uses the default SCOM monitoring account, instead of the Sharepoint RunAs account.
Any suggestions?
How do I make it use the correct Run As account?
(This guy has the
same problem)
Thanks,
NikolajI was looking at this issue not too long ago, and looked through the management pack xml, to see if there was a missing secure reference for DB connection monitors. I only glanced through the MP, but it looked to me as if the DB connection
monitors references the same account as the other sharepoint monitors. (Yes, that full-blown farm admin account). Again I am not sure, but it seems the management pack has trouble using the referenced RunAs account in the connection strings and then, because
the watcher node is setup default to run off the management server, it falls back to the management server action account.
You mention, that you have a two-way trust between you management group and SPS SQL servers. You could then bring this to work by granting your management server action account public rights on your configuration and content DB’s. Not
optimal, but it’s a workaround. For SPS 2013 this should work without changing the connection strings, as you would have to with SPS 2010.
I know this is not solution you’re are looking for, but it just might be enough for you to get a step further. I don’t know of any solution, so far, to get the DB connections to use the SPS RunAs account. -
Failed to create configuration database on Sharepoint Foundation 2010 install under Windows 7
Configuration Failed
Failed to create the configuration database.
An exception of type System.IO.FileNotFoundException was thrown. Additional exception information:could not load file or assembly 'Microsoft.IdentityModel, version = 3.5.0.0,culture=neutral, PublicKey Token=31bf3856ad364e35' or one of its dependencies. The
system cannot find the files specified.
I already installed microsoft sharepoint foundation 2010 but I got the error as per above.How to solve this problem?Hi,
Also check out Bill Baer's post:
Common Microsoft SharePoint Server 2010 Installation Issues and Resolutions
http://blogs.technet.com/b/wbaer/archive/2009/12/11/common-microsoft-sharepoint-server-2010-installation-issues-and-resolutions.aspx
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Sharepoint server 2013 configuration issue - failed to create configuration database
Hi All,
I have installed the SharePoint server 2013. After installing the SharePoint products, the configuration stops at failure of creating configuration database.
Some system configuration & info:
- 1 Domain controller server run Active Directory services on Windows server 2008 R2 SP1 (PC1 with name DC.Brainfiniti.com)
- 1 Server which is used for installing Sharepoint server 2013 and MS SQL server 2008 R2 SP1 (PC2 with name App.Brainfiniti.com)
- All of PCs were satisfied the requirement of Sharepoint server 2013
- Firewall turned off & No antivirus tool was installed.
- During installing of Sharepoint, choose "Complete" option: Farm mode and use SQL Server instead of SQL Express.
- During configuration, created a new farm with a domain user account.
- Use domain account to log on and install, configure in Sharepoint & SQL server (PC2)
ATTEMPTS:
1. Tried install and set up all of steps with just 1 account - domain administrator.
2. Tried with separate domain account:
- SQL Service account use for:
+ Install SQL server 2008
+ Connect all SQL services
+ Admin for SQL server
- Setup account use for:
+ Member of local administrator group in PC2
+ Install Sharepoint
+ Run Configuration wizard
+ Was granted permission in SQL database: dbcreator, securityadmin, sysadmin and deselect serveradmin role.
+ Was choose for the database account in configuration database step
Also tried with SQL service account in this step.
3. Tried with Standalone mode for Sharepoint installing
4. Trie with domain name: Brainfiniti.local
5. Tried with some another solution from topic relate to database configuration in our community but not successful.
But all attempts are failed at this configuration database step :'(
Please correct me if I am going wrong by missing something or do I need to start/install some services.
Screenshot Attached
Sorry! Cannot add screenshot because my account is still not verified. Will add later.
LOG ENTRY:
01/23/2013 06:58:28 1 INF Entering function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
01/23/2013 06:58:28 1 INF Found a task by the name of adminvs in the task collection
01/23/2013 06:58:28 1 INF Entering function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:28 1 INF Entering function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Entering function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Trying to start service W3SVC and waiting 180 sec to do so
01/23/2013 06:58:28 1 INF service W3SVC is Running, nothing to do
01/23/2013 06:58:28 1 INF starting service W3SVC (it may already be started)
01/23/2013 06:58:28 1 INF Leaving function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Leaving function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Trying to see if port 40993 is free on machine APP. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF A SocketException was thrown with
SocketError ConnectionRefused
01/23/2013 06:58:30 1 INF Connect has been refused for port 40993, so we will consider this a free port
01/23/2013 06:58:30 1 INF Have not found a free port yet. Number of tries is 1. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF Adding port 40993 to the exclusion list so it is not chosen again during this run
01/23/2013 06:58:30 1 INF Leaving function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:30 1 INF Leaving function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
I just post a part of its logs which contain "error" string because it's too long.
According this log, there is a error in port connection but i've turned firewall off ???
Please help me with this mix up :'(
p/s: sorry for my English!
Thanks,
Hien HoangBelow is the logs entry with "ERR" marked line:
01/23/2013 07:03:17 9 INF Now joining to farm at server app.brainfiniti.com database SharePoint_Config
01/23/2013 07:04:12 9 ERR Task configdb has failed with an unknown exception
01/23/2013 07:04:12 9 ERR Exception: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not
be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 ERR An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception
information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Creating the OnTaskStop event for task configdb
01/23/2013 07:04:12 9 ERR Task configdb has failed
01/23/2013 07:04:12 9 INF friendlyMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 9 INF debugMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Firing the OnTaskStateChanged event for task configdb
01/23/2013 07:04:12 9 INF Entering function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName
for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName
is configuration database
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Received an TaskStateEventHandler event. task:configdb TaskBase.State:stopped
01/23/2013 07:04:12 9 INF Entering function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Incremented the number of tasks failed to 1
01/23/2013 07:04:12 9 INF Leaving function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Task configdb has stopped and failed. Total failed is now 1
01/23/2013 07:04:12 9 INF Leaving function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Invoking the UI thread with the task state chagne event
01/23/2013 07:04:12 1 INF Entering function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 1 INF Received an TaskStateEventHandler event. task:configdb
TaskBase.State:stopped TaskBase.TaskResultconfigdb
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 ERR Task configdb has stopped and failed. Total failed
is now 1
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
disconnect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter disconnect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
connect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter connect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
create
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter create in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
for language English (United States)
01/23/2013 07:04:12 1 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
is Failed to create the configuration database.
01/23/2013 07:04:12 1 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Updating the task label below the progress bar Failed to
create the configuration database.
01/23/2013 07:04:12 1 INF Entering function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Leaving function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Last message from task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Updating the task additional notification information below
the progress bar An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Leaving function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 9 INF Sleeping an extra 1 ms so things don't go too fast for the user for this
task
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background with our
trademarked image
01/23/2013 07:04:12 9 INF Leaving function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Leaving function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Leaving function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Leaving function TaskThread.ExecuteTask
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName for language English (United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName is configuration database
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Task configuration database failed, so stopping execution of the engine
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key disconnect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter disconnect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key connect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter connect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key create
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter create in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel for language English
(United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel is Failed to create the configuration
database.
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Failed to create the configuration database.
An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 4 INF Entering function TaskDriver.NotifyTaskSummary -
SharePoint 2007:Cannot connect to the configuration database.
The share point 2007 server under Windows Server 2008 R2 runs well formerly, but suddenly the user can't visit the site with error on page:
Cannot connect to the configuration database.
I also checked windows log with bellow main errors:
Log Name: Application
Source: Office Server Search
Date: 2015/2/28 22:30:47
Event ID: 10034
Task Category: Gatherer
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Could not access the Search service configuration database.
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Office Server Search" />
<EventID Qualifiers="49152">10034</EventID>
<Level>2</Level>
<Task>3</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:30:47.000000000Z" />
<EventRecordID>2323514</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>
Context: Application 'b9f7f366-4027-4923-b5ce-b93c132df7c3'
Details:
Unspecified error
(0x80004005)</Data>
</EventData>
</Event>
======================================
Log Name: Application
Log Name: Application
Source: Windows SharePoint Services 3
Date: 2015/2/28 22:30:50
Event ID: 5586
Task Category: Database
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Unknown SQL Exception 64 occured. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows SharePoint Services 3" />
<EventID Qualifiers="0">5586</EventID>
<Level>2</Level>
<Task>484</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:30:50.000000000Z" />
<EventRecordID>2323517</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>64</Data>
<Data>A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)</Data>
</EventData>
</Event>
==================================================
Source: Windows SharePoint Services 3
Date: 2015/2/28 22:31:00
Event ID: 27745
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
The description for Event ID 27745 from source Windows SharePoint Services 3 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.
the message resource is present but the message is not found in the string/message table
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Windows SharePoint Services 3" />
<EventID Qualifiers="14130">27745</EventID>
<Level>2</Level>
<Task>1105</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-28T14:31:00.000000000Z" />
<EventRecordID>2323520</EventRecordID>
<Channel>Application</Channel>
<Computer>***</Computer>
<Security />
</System>
<EventData>
<Data>#50071: Unable to connect to the database SP_Config on ***. Check the database connection information and make sure that the database server is running.</Data>
</EventData>
</Event>
Please kindly support to find the root cause and guide how to fix it ASAP.
Many appreciations for your hellp in advance!
Note:
1)As checked, SQL server service is running well;
2)Web server log under the path C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\LOGS with bellow errors:
03/02/2015 11:25:53.28 mssearch.exe (0x0F0C) 0x08FC Search Server Common
GathererSql 0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx
Line:9654
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common Common
0 Monitorable Application b9f7f366-4027-4923-b5ce-b93c132df7c3, resource 1: pIDBInitialize->Initialize error. Failed to create a non fast load session. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp Line:608
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common Common
0 Monitorable CResourceManager::CreateSession Error creating non fastload session 'Provider=SQLOLEDB;Extended Properties='Server=***;Database=SP_SharedServices_Search;Trusted_Connection=yes;App=Windows SharePoint Services;Timeout=15';'. - File:d:\office\source\search\search\searchdll\resourcemanagerimpl.cpp
Line:658
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common UtilCommon
0 Monitorable Dumping error record [0]: Source: Microsoft OLE DB Provider for SQL Server HRESULT: 0x80004005 Code: 11 Description: [DBNETLIB][ConnectionRead (recv()).]General network error. Check
your network documentation. - File:d:\office\source\search\common\pkmutild\atldbext.cxx Line:1250
03/02/2015 11:25:53.39 mssearch.exe (0x0F0C) 0x08FC Search Server Common GathererSql
0 Monitorable CSqlCrawl::ExecuteCommand() Failed in GetSession, Error is 0x80004005 - File:d:\office\source\search\search\gather\server\gatherobj.cxx Line:9654Hi,
In this forum we mainly discuss questions and feedbacks about Office products, since your question is about SharePoint, I suggest you post the question in SharePoint forum to get further assistance:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=sharepoint
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Configuring Database Security Store is failing
Guys,
I am trying to configure Database Security Store while installing 11gR2 (OIM, OAM, SOA) and wlst.sh script is failing. Here is the format I am giving.
$MW_HOME/oracle_common/common/bin/wlst.sh $ORACLE_HOME/common/tools/configureSecurityStore.py -d $IAM_DOMAIN_LOCATION -m create -c IAM -p $ORA_PASS
Here is the error message i am getting.
Problem invoking WLST - Traceback (innermost last):
File "/apps/Oracle/Middleware/Oracle_IDM1/common/tools/configureSecurityStore.py ", line 15, in ?
ImportError: no module named security
Please let me know how to resolve this issue.
PS: I created a new domain with 7002 for OIM, OAM & SOA as 7001 is being used by OID domain. And trying to run the above command with 7002 domain name and getting this error.This is a bug.
Run a search for wlst.sh in your environment and call the wlst.sh from oracle_common/common/bin not from wl_server/common/bin.
You can look for this (Doc ID 1493576.1) in Oracle support.
Thanks,
Ram -
Sharepoint 2010 - configuration database size limit
Hi,
We have below scenario in our production farm. Ours is a SharePoint 2010 Enterprise Edition server.
Medium size farm (4 WFE, 4 App Servers, Content DBs in separate tier. No SharePoint search in this farm)
Configuration DB reached 250+ GB. Please clarify below queries.
1. What is the boundary limit for configuration database size?
2. How we can scale the configuration database?
3. Can we add multiple configuration database per farm?
4. What are the best practices and regular maintenance activities to be done to keep the configuration db size under control?
It would be really really great if someone gives some good knowledge in this area.1) Not aware of one
2) You can add multiple files to the file group
3) No
Is the growth in the MDF or the LDF (log file)? If it is in the log file, are you using high availability (Clustering, Mirroring, Log Shipping, AlwaysOn)? If so, you need to run a BACKUP LOG periodically to maintain the LDF size, or allow you to truncate
the LDF.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Unable to Configure Database in ConsoleOne
PROBLEM
I can navigate to Tools->Zenworks Inventory->Configure Database, browse to
and select {server_name}_invDatabase. However, when I click OK the mouse
pointer just turns into an hourglass. The window wont close and accept
the change. You end up clicking Cancel with the hourglass to close the
window. You can right click on the {server_name}_invDatabase object in
eDir and choose Zenworks Inventory->Configure DB but when you attempt to do
a query or something a window pops up prompting you to first configure your
database.
SYSTEM
Netware 6.5 SP5.
ConsoleOne 1.3.6e with Zenworks 6.5.2 snapins (after upgrade, see below)
We were running Zenworks for Desktops 4 until I upgraded to Zenworks 6.5
SP1 about a year to year and a half ago. Some time after that the
Inventory functionality stopped. Im now trying to fix it.
ATTEMPTS TO FIX
1. I first applied Support Pack 2 for Zenworks 6.5. That didnt fix my
problem.
2. I then tried reinstalling the Inventory Service off the Zenworks 6.5
with SP1 CD, starting the Inventory service, and then reapplying SP2. That
didnt fix it.
3. I have followed the steps in Novell TID # 10097151. I actually had been
wondering which object was the correct one, if it was Inventory
Service_{server_name} or {server_name}_ZenInvService. After following
these steps I am seeing computers getting inventoried on the Inventory
Service console screen. That wasnt happening before. So this fixed one
of my problems but not all of them.
4. I then followed the steps in Novell TID #10097366. I confirmed the
usernames were set as shown and retyped the passwords. I even restarted
the Sybase (ASA) and Zen Inventory services at the console but that didnt
fix it.
5. I found this thread
(http://groups.google.com/group/novel...b931657601b01a)
in which other users were dealing with the same problem. I found an older
copy of InventorySnapins.jar as specified and tried it but that didnt fix it.
What can I try next? I really want to use Zenworks to hunt for old apps on
my network that were not using anymore.
And in a side note, where *do* you configure Zenworks to scan a workstation
for applications? The software scan tab of the workstation inventory
policy has a footnote saying these settings only apply to ZfD 3.2, 4, and
4.01. I checked the ZfD 6.5 SP2 manual and it says about the same thing
verbatim. However, neither one includes a helpful sentence telling you
*where* to set this if you are using Zenworks 6.5 or even referring to a
different chapter or section of the manual. Does Zenworks just assume that
if you want to inventory the hardware that you want the software
inventoried as well and just do it automatically?
Thanks in advance for your help!
MatthewI see. It seems there was a change in assumptions when Novell moved from
Zenworks 4 to 6.5. Previously it seems there was the assumption that since
desktop computers weren't that powerful it might overwhelm them to scan for
both hardware and software. Therefore, these options were put next to each
other so you could choose. In Zenworks 6.5 the assumption is that, since
client computers have become more powerful, if you're scanning the client
hardware you're going to want to scan the software as well. Therefore they
took away the use of the software tab and made it less obvious on how to
disable scanning.
Everything seems to be working for me now on Zenworks Inventory. It's been
inventorying for about 48 hours now and has updated most of my stale
records. I want to thank Shaun for all the posts he replies to on the
Zenworks newsgroups. I've seen his replies all over the place as I was
searching through Google Groups trying to fix this and they helped me fix my
problems.
Matthew -
Shared Services Configuration : Database type
Hi all,
i installed essbase and couldn't connect to sql to load the data into essbase( though it works fine with excel and text file)
after numerous pondering on the forums I could not find a solution to my probelm
why i could not connect to sql from essbase ?
I decided to retry the installation . I have come to a point within installation where i need to select
Shared Services Configuration : Database type
unfortunately oracle is not available here though I have installed oracle 11g on my machine and setup users to be used in the epm system ( version 11.1.2)
the only type available is the oracle jdbc driver .
Any suggestion as to how i can get oracle database type here ?
OR am i missing something prior to installation.To connect to load data or metadata follow steps
1. Create a system DSN in the machine which is hosting Essbase Server.
2. Select Create Rule file.
3. Go To File and select Open SQL.
4. Select Application and Application
5. Select DSN and provide user credentials.
Hope this helps.
Database Type - Is the database Type which you want to use i.e. IBM DB2 / MS SQL Server / Oracle...
Hope this helps.
Regards,
Manmohan Sharma -
Incorrect/Corrupt Farm Configuration database server name
I have a SharePoint 2007 farm (version 12.0.0.6219) with a corrupt configuration database (SQL Server 2008 R2) consisting of a Central Administration server and a database server for Windows SharePoint Services Database. In a failed attempt to move the configuration
database to a new SQL server, the farm is referring to a SQL server that no longer exists. All databases on the new SQL server have been successfully moved from the old SQL server, but SharePoint does not recognize the configuration database. The network name
of the old SQL server has been aliased to the never SQL server, so the farm is operational. But the
Servers in Farm page states the old server as the configuration database server.
After doing my own research, it appears to me the issue is in the Objects table in the
SharePoint_Config database below.
Id
ClassId
ParentId
Name
Status
Version
1
AF14B6A3-2152-41BB-9407-3BB3D8E30C10
3112E92F-B97D-481E-8CEB-03FDE15ED1A7
BD5B4337-4294-4FC4-8EE2-0D51968D05DB
0
0x00000000000007DD
2
990CCD53-6D0F-4998-A060-45408E818ED5
3112E92F-B97D-481E-8CEB-03FDE15ED1A7
5DAA8D3C-B6EF-443C-B6AC-E1F704E35A94
0
0x00000000000BDF1D
3
DA951888-B47A-473E-97C2-B0EF78226512
E6591A38-008A-4F23-A88F-36A181C7D4EB
AF14B6A3-2152-41BB-9407-3BB3D8E30C10
SharePoint_Config
0
0x00000000000007E3
4
109CA292-69CB-417D-AFDF-C2A9DCE44A1B
674DA553-EA77-44A3-B9F8-3F70D786DE6A
109CA292-69CB-417D-AFDF-C2A9DCE44A1B
SharePoint_Config
0
0x00000000000008E7
5
BD5B4337-4294-4FC4-8EE2-0D51968D05DB
E77AAF47-3CAC-4001-BC6B-5BCCB6486318
109CA292-69CB-417D-AFDF-C2A9DCE44A1B
Old SQL Server
0
0x00000000000007D4
6
5A9AAEA8-A7E8-490F-8107-3D61F0D2A4E5
E77AAF47-3CAC-4001-BC6B-5BCCB6486318
109CA292-69CB-417D-AFDF-C2A9DCE44A1B
Exchange server
0
0x0000000000039216
7
3886B6E4-0E9E-499B-96A0-7CC677F8A5D0
E77AAF47-3CAC-4001-BC6B-5BCCB6486318
109CA292-69CB-417D-AFDF-C2A9DCE44A1B
Web Server
0
0x00000000000BFE51
8
5DAA8D3C-B6EF-443C-B6AC-E1F704E35A94
E77AAF47-3CAC-4001-BC6B-5BCCB6486318
109CA292-69CB-417D-AFDF-C2A9DCE44A1B
New SQL server
0
0x00000000000BDF17
It looks like all I’d have to do delete row id’s ...E1F704E35A94 and ...45408E818ED5 (<red>red</red> row #’s 8 and 2) after shutting down all SharePoint Web Applications and services. Then update
Old SQL Server with New SQL Server. Possibly even deleting row ...B0EF78226512 (orange row # 3) could be done as it appears to be an orphaned part of the configuration. These ids are not referenced in any other table in this database.
Any help on this would be appreciated. Thanks in advance.
P.S. Sorry it looks like my table rendering didn't work as intended.
-----&gt;Executive Vectorare you using the SQL alias to pointing to the Config Database server?
did you stop all the timers services, admin services other services before moving the Config DB and configuring the alias to new server.if you did not then it will corrupted.
If you are not using the SQL Alias and using the sql server name then you cannot move it.
you need to rebuild new farm with creation of new Config DB, then create SSP /Web apps and attached your content Database.
Directly playing with the Config Database is not a good idea at all and i am sure deletion is not supported in any means.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
ORA-00001: unique constraint during "Configure Database Security Store for OIM Domain"
Hi Guru's,
I am following the below steps for OIM 11.1.2.1 with SOA 11.1.1.7 Installation and facing below error during step "Configure Database Security Store for OIM Domain".
Installed Database 11.2.0.3
Installed RCU (Here I used two versions.
RCU 11.1.2 - Used IDAM prefix for (Metadata Services, OPSS, OIM)
RCU 11.1.1.7 - Used SOA prefix for(Metadata Services,SOA Infrastructure, User Messaging service)
Installed JDK 7 (Java 1.7)
Installed WL 10.3.6 (MW_HOME-/u01/Middleware/fmw, WL_HOME=/u01/Middleware/fmw/wlserver_10.3)
Installed FMW 11.1.2.1 for OIM. (ORACLE_HOME=Oracle_IDM1)
Installed FMW 11.1.1.7 for SOA (ORACLE_HOME=Oracle_SOA1)
WL Domain creation. (Domain Name – idam_domain1)
Configure Database Security Store for OIM Domain.
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (IDAM_OPSS.IDX_JPS_RDN_PDN) violated
Also followed the below bug solution, but issue still occurs.
Bug 16690836 : CONFIGURE DATABASE SECURITY STORE (CONFIGURESECURITYSTORE.PY) SCRIPT IS FAILING
@ 1. Delete the Schemas using RCU.
@ 2. Recreate the OAM schemas.
@ 3. Reinstall the WLS and OAM software.
@ 4. Run config.sh to create a new domain.
@ 5. Run setDomainEnv.sh from user_projects/domains/<Domain_name>/bin
@ 6. Run the configureSecurityStore.py from same window.
Not sure if anyone tried with different steps that fixed the issue? Could you please help.
Thanks
VGHi Gurus, I got the solution from Oracle. SOA 11.1.1.7.0 shouldn't be used with Identity Management 11.1.2.1.0(11GR1-PS1) version. Identity Management 11.1.2.1.0(11GR1-PS1) is bundled with SOA 11.1.1.6.0. When used this SOA version, Installation went smooth. Thanks VG
-
Content database and share point configuration databases in different sql servers
HI
i have a sharepoint 2010 farm and connected to a sql server ,
here it can be possible to connect all sharepoint configuration databases to one sql server,
and content database in different sql server ,
if i do in future can i face any issues?
adilYes you can. You can specify the SQL server whilst creating the databases and as long as you have configured the required permissions that will be fine. If you really wanted you could have a dedicated SQL instance for each database, although that would be
very wasteful.
There are no significant issues, you will have a bit more maintenance to look after two SQL servers but that's about it. -
Cannot connect to configuration database - share point services 3.0
Hello,
Im running a SharePoint Service 3.0. Databases are on a SQL 2005 server.
Yesterday I wanted to change the user identity for the IIS application pools. I also added the new user to access the databases. After the change I got the message that I couldnt connect to the configuration database when I opened the SharePoint Site/Central
Administration.
Now I wanted to change the user identity for the application pools back to the old identity - for this I had to change the users password. After the change I still get the message and dont know what to do.
I did this - https://support2.microsoft.com/kb/934838/en-us ; http://support2.microsoft.com/kb/823287/en-us
Thanks in advance for your help,
KevinCheck if you are able to connect to SQL server using management studio.
GO to c:\ or d:\ create a text file. Then rename the extension of file from .txt to udl. example SQL.udl
Now open this SQL.udl and type the server name. try to connect to SQL server.
If you face issue with .udl then there is some network issue between SQL and sharepoint.
If UDL works fine then there is some issue with either config db or sharepoint server.
Check if sharepoint user is not locked and firewall is disabled on both servers
If this helped you resolve your issue, please mark it Answered -
Sharepoint Services 3.0 can't connect to Configuration Database
When i try to connected to existing configuration database it's only shows NT AUTHORITY\NETWORK SERVICE as my login user for database access , when i type another user , error message " you must specifay the same user account as your farm server you wish to join " how i can change it.
please help me how i can change the configuration user and password for my singel farm server
Thanks , i fixed it ??how did you fix it I have the same problem
-
Hi
After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
I can open Central Administration site just fine.
but now when I open any Site collection, I got this error.
Server Error in '/' Application
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
I have restarted all the servers: SQL server, WFE and APP servers but still cann't get this resolve.
Services on all servers are running, IIS - application pools are running.
Can someone help with where that could be a problem or if there is a solution.
Thanks in advance for your comments or advices.
SwanlPlease verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply. -
Hi,
We need to migrate Our current 1 clustered SQL Server, Many Configurations DataBases and Many Content DataBases to a brand new clustered SQL server and brand new databases in it.
How can I do this?
Can someone list the steps involved?
Thanks.Hi,
According to your description, you want to move Content databases and Configuration databases to a new SQL Server, refer to this article:
https://technet.microsoft.com/en-us/library/cc512725.aspx?f=255&MSPPError=-2147217396
Besides, here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/office/en-US/2cd46f7a-d583-41b2-82c2-ddc6d7c43fb8/how-to-move-sharepoint-databases-to-new-sql-server?forum=sharepointadminprevious
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Maybe you are looking for
-
EPS files from CS5.5 to QuarkXPress 9
I am trying to help someone working in a PC-only environment. Using InDesign CS5.5, we do Export as EPS and specify Level 2 (or 3, made no difference) PostScript, Grayscale and Binary. If then create a new document in QuarkXPress 9, draw a picture bo
-
How do I create an artificial horizon indicator?
I need to create an artificial horizon indicator to show pitch and roll. Does anyone have any suggestions on how to accomplish this?
-
Do I need to install something in server to enable iPad user to use SAP?
I know that at client side, mobile user just need to have SAP Business One mobile application installed in the iPad. But how about the server side, is it necessary for the Administrator to install something? If it is, what is to install & how to obta
-
HELP!!! Problems in opening Pagemaker files in Indesign
I am an editior for mathemtics books. I used to use the Pagemaker 7.0 to prepare my book. Before inputting the materials into the Pagemaker, I typed all of my contents in Microsoft Word. In the Microsoft Word environment, other than the text, I¡¦ve u
-
IPhoto crashes on Snow Leopard, Memory Deallocation Bug
I have on the order of 10 Macs. I also have several sizeable iPhoto libraries that I work on regularly. The libraries are on removable media that can be moved between different computers (eSata and Firewire drives). For some reason, many months after