Configuring Disco with R12

Hi,
I need to do a fresh configuration of 10g discoverer with R12 single node on linux. Here are the steps i am planning to do (ref doc.Note:373634.1).
Please correct me if i am missing something.
1. Install R12 (single node)
2. Download Oracle Business Intelligence Server 10g Release 2 (10.1.2.0.2)
as_linux_x86_bi_101202_disk1.cpio
as_linux_x86_bi_101202_disk2.cpio
3. Install Business Intelligence Server in a different Oracle home on same server where R12 is installed.
4. Apply Discoverer Plus and Viewer MLR Patch 5367472 to your R12 installation.
5. Configure Oracle Discoverer 10g Release 2 (10.1.2.0.2)
copy dbc file, update tnsnames.ora etc.
6. Create the Discoverer End-User Layer
7. Set disco URL in OAM and Run autoconfig.
8. Set Application profile

To implement the solution, please execute the following steps:
Discoverer Administrator / Desktop: Download and apply Patch 5566430 - APPS: MLR FOR E-BUSINESS SUITE R12: WINDOWS ADMIN/DESKTOP
Discoverer Plus / Viewer: Download and apply Patch 5367472 - APPS: MLR FOR E-BUSINESS SUITE R12: LINUX PLUS/VIEWER for your platform
Note: 443661.1 - Discoverer 10g (10.1.2) Connectons To Oracle E-Business Suite 12 Fails With 'Invalid Username/Password'
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443661.1

Similar Messages

How to configure dbconsole on R12.1 with 11g database on RHEL AS 5(64-bit)

Hi Dear
I want to configure dbcosnole on R12.1 with 11g database. When i start it by executing the command emctl start dbconsole it does not start. It shows the following error:
OC4J Configuration issue. /u01/oracle/PROD/db/tech_st/11.1.0/oc4j/j2ee/OC4J_DBConsole_dg.orientpower.com.pk_PROD not found.
I will highly appreciate, if anybody could help me to resolve this issue.
Thnx
Jabbar

You might want to checkout
http://download.oracle.com/docs/cd/E11882_01/install.112/e10813/dbcacrea.htm#sthref287
Oracle® Real Application Clusters Installation Guide
11g Release 2 (11.2) for Linux and UNIX

Discoverer 10g integration with R12

Hi,
I am installing stand alone Discoverer 10g , no infra and no middle tier, just i want to install Discoverer 10g , my question is---> will it create own own discoverer database , else do i need to integrate with apps ,
If its not going to create disco database , then we will integrate with R12,
Thanks

Ravi,
Can you guide us how you are installing Discoverer 10g WITHOUT infra and middle tier ? and configuring with APPS R12. Can you put some ligth on it and provide us documents to follow.You need to install Oracle Business Intelligence Server 10g Release 2 (see the document referenced above for details).
Regards,
Hussein

Facing issues with R12 and SOA 11g integration using Business events

Hi,
I am trying to integrate R12 application with Fusion using 11g SOA suite. I configured BES in R12 application and I am able to raise a business event and query it from WF_BPEL_Qtab. I have an Oracle applications adapter listening for the same event in SOA composite deployed over a server. I have verified the DB connection and schema for R12 application in 11g SOA server. However, no SOA instance is being generated. No server log as well.
I understand that 11g SOA uses EDN (using fusion_edn schema) for business events. Are there any changes expected to be done to Oracle Apps adapter to ensure the event is received.
P.S. Oracle apps adapter configuration is probably correct as the out bound calls are taking place correctly.
Thanks,
Sagar

Hi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul

BNE_UIX_PHYSICAL_DIRECTORY is not configured error in R12

Hi All,
We are on 12.0.4 instance, i have attached responsibility "Desktop Integrator" to user and if i click on "Create Document" It is throughing an error "BNE_UIX_PHYSICAL_DIRECTORY is not configured". I have checked some document 430991.1 in metalink, all are refered to Profile option "BNE_UIX_PHYSICAL_DIRECTORY" and remove any value present in the profile option. I did the same and bounced the Apache. ev en though we are getting the same error. Please guide me.
Many Thanks in advance..

To folow the note [ID 549758.1], i pur the profile option in the site or in the Responsability?Site level -- Make sure you bounce Apache then.
Please also check your other thread -- Re: Oracle Web ADI with R12 Error :BNE_UIX_PHYSICAL_DIRECTORY is not configured
Thanks,
Hussein

Active Data guard with R12.1.X

Hi
One of our customers wants to configure their EBS R12 Instance with Active Data guard
Current Architecture:
R12.0.6 with RDBMS 10.2.0.4
Projected Architecture:
R12.1.3 with 11.2.0.3 RDBMS with Active Data guard.
I have checked the MOS ID :
Using Active Data Guard Reporting with Oracle E-Business Suite Release 12.1 and Oracle Database 11g [ID 1070491.1]
Please share your ideas and doc id's to do this activity successfully.
Please share the docs to upgrade R12.0.6 to R12.1.1
Thanks
Shaik

One of our customers wants to configure their EBS R12 Instance with Active Data guard
Current Architecture:
R12.0.6 with RDBMS 10.2.0.4
Projected Architecture:
R12.1.3 with 11.2.0.3 RDBMS with Active Data guard.
I have checked the MOS ID :
Using Active Data Guard Reporting with Oracle E-Business Suite Release 12.1 and Oracle Database 11g [ID 1070491.1]
Please share your ideas and doc id's to do this activity successfully.The document you posted covers every thing in detail.
In details you can check
http://appsdbastuff.blogspot.com/2009/07/configuring-standby-databasedataguard.html
Disaster recovery for R12.1.1
Please share the docs to upgrade R12.0.6 to R12.1.1Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Release 12.1.1 Maintenance Pack Installation Instructions [ID 752619.1]
Upgrade 12.0.6 To 12.1.1 Failed On Frmxml.odf with Duplicate Keys [ID 1094034.1]
Thanks

Configure webutil on R12.1.1

Hi Friends,
I have an R12.1.1. Vision Instance.Please let me know how to configure webutil on this R12.1.1. Instance?
Regards,
DB

Hi,
Why you need to configure webutil in R12 instance?
Webutil configuration can be found at: http://www.oracle.com/webapps/online-help/forms/10g/state/content/navId.3/navSetId._/vtAnchor.BEGIN/vtTopicFile.web_util%7Cinstall~htm/
I am not sure if it is supported to configure webutil with 11i/R12 instance, so you may log a SR to confirm this with Oracle support.
Regards,
Hussein

10g - how to configure sso with iis-

hi, experts, I have followed Oracle® Business Intelligence Enterprise Edition Deployment Guide to configure SSO with IIS.
but I always meet this message.
Not Logged In
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred
what steps are missing?
how to check?

hi, experts,
I checked C:\OracleBIData\web\log\sawlog0.log on the obi server (windows server 2003 standard).
at Thu Feb 17 14:48:46 2011 , I logined OBI on another machine (not via the browser on the obi server).
however, the log shows the login user is the administrator of the obiserver (obiserver\administrator ).
any setup on IIS are wrong? thank you very much!
=========================================================================================
Running job 'MinutelyMonitor' took 7422 milliseconds, 12.3% of job's frequency (60 seconds).
Type: Error
Severity: 40
Time: Thu Feb 17 14:48:46 2011
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-1796
Location:
     saw.odbc.connection.open
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for obiserver\administrator in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Thu Feb 17 14:48:46 2011
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-1796
Location:
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
---------------------------------------

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

Non-configurable materials with EK02 costing

Hi all,
We have a range of non configurable manufactured materials which, when used in standard sales orders, generate a production order and BOM. Presently the cost is automatically generated from the material master and is populated as a VPRS cost.
As these materials have a BOM we want the cost to pick up from the BOM instead, ie as an EK02 cost. If we enter such a material and do a manual recost the EK02 populates in the sales order item conditions but we cannot get it to populate automatically as it does with configurable materials with BOMs.
In the define item categories section in SPRO we have removed the determine cost tick. This has the desired effect of removing the VPRS cost but the EK02 cost still doesn't pull through. In the Bill of Material / Configuration section of the item category we tried setting the structure scope to A (Explode single-level bill of material) and B (Explode multi-level bill of material) but this didn't work. If we set it to D (Configuration, poss. with BOM explosion), then we get the "item can be configured but there is no configuration" error when used in a sales order which is expected as these products have no configuration.
We also tried deleting the standard cost held in the material master to see if, as that value was now blank, it would pick up the EK02 instead but, alas, this also ddn't work.
Any help / suggestions would be most appreciated.
Kind regards, Rob

HI,
We are maintaining the Service masters for the services we render, there is no valuation of Inventory as only service is being rendered.
But we have maintained BOM and Routings for the services we render.
Even there is no valuation class in the serivice masters as this is non valuated.
Can you guide me more on this pls.
Thanks,
Ravi

Create a configurable material with reference to another config material

Hi,
I want to create a configurable material with reference to another configurable material from different system.
Please tell me what data i need to check to see if that material has been created (copied manually) successfully.
Thanks.

Hi,
In case of configurable material most important thing is configuration so please check weather the configuration is copied perfectly with all characteristics or not. Similarly check the valuation class and price control is proper or not.
Regards,
Umesh

Problem in Integration of Apex with R12

Hello,
I followed the paper apex-ebs-extension-white-paper-345780.pdf to do Integration of Apex with R12. but stuck on one step.
I am done with all the steps in R12. Now if i click the menu in R12, its going to my existing Apex aplication but still asking username and password.
Can anyone help me out in what exactly I need to change in Apex Authentication scheme in Apex. Right now I am using Authentication scheme as Application Express.
Please help me out
Thanks in advance
Ananya
Edited by: Ananya on 26 Dec, 2011 8:51 PM

Hi Mini,
Thanks a lot for ur replies. But it is not working for me. I am not able to figure out whats going wrong.
My Requirement is to redirect to the first page of my application without asking for the APEX login page from the EBS menu.
So summarizing whatever I steps i have followed:-
(1) Created Profile and function in APPS as given in "apex-ebs-extension-white-paper-345780.pdf"
(2) I created the following package in APPS schema
     CREATE OR REPLACE PACKAGE APPS.XXAPX_SECURITY_PKG AUTHID DEFINER AS
     FUNCTION generate_hash (
     p_string IN VARCHAR2
     , p_offset IN NUMBER DEFAULT 0) RETURN VARCHAR2;
     FUNCTION validate_hash (
     p_string IN VARCHAR2
     , p_hash IN VARCHAR2
     , p_delay IN NUMBER DEFAULT 5) RETURN BOOLEAN;
     END XXAPX_SECURITY_PKG;
     CREATE OR REPLACE PACKAGE BODY APPS.XXAPX_SECURITY_PKG AS
     g_key VARCHAR2(100);
     FUNCTION generate_hash (
     p_string IN VARCHAR2
     , p_offset IN NUMBER DEFAULT 0) RETURN VARCHAR2
     IS
     BEGIN
     IF p_string IS NULL THEN RETURN NULL; END IF;
     RETURN RAWTOHEX(UTL_RAW.cast_to_raw(
     DBMS_OBFUSCATION_TOOLKIT.MD5(
          input_string=>p_string||':'||
          TO_CHAR(SYSDATE-(p_offset/24*60*60), 'YYYYMMDD HH24MISS')||g_key)));
     END generate_hash;
     FUNCTION validate_hash (
     p_string IN VARCHAR2
     , p_hash IN VARCHAR2
     , p_delay IN NUMBER DEFAULT 5) RETURN BOOLEAN
     IS
     BEGIN
     FOR i IN 0..p_delay LOOP
     IF p_hash = generate_hash (p_string, i) THEN RETURN TRUE; END IF;
     END LOOP;
     RETURN FALSE;
     END validate_hash;
     BEGIN
     SELECT encrypted_user_password INTO g_key
     FROM FND_USER WHERE user_name = 'SYSADMIN';
     END XXAPX_SECURITY_PKG;
(3) Created a function in the APPS schema:-
     create or replace FUNCTION ebs_authenticate (
     p_username IN VARCHAR2
     , p_password IN VARCHAR2) RETURN BOOLEAN
     AS
     BEGIN
     IF apps.XXAPX_SECURITY_PKG.validate_hash (p_username, p_password) THEN RETURN TRUE; END IF;
     RETURN (apps.FND_WEB_SEC.validate_login (p_username, p_password) = 'Y');
     END ebs_authenticate;
(4) In my authentication scheme of my apex application i have changed it to use custom authentication to use the below function
     return apps.ebs_authenticate
(5) Created a procedure in the APPS schema:-
     create or replace PROCEDURE apps_logon
     IS
     v_username VARCHAR2(100);
     v_password VARCHAR2(32);
     BEGIN
     wfa_sec.getsession(v_username);
     v_password := xxapx_security_pkg.generate_hash(FND_GLOBAL.user_name);
     IF v_password IS NOT NULL THEN
     APEX_CUSTOM_AUTH.login(
          P_UNAME => v_username,
          P_PASSWORD => v_password,
          P_SESSION_ID => v('APP_SESSION'),
          P_APP_PAGE => apex_application.g_flow_id||':38'
     ELSE
     RAISE_APPLICATION_ERROR(-20001, 'Password is null, session id = '||icx_sec.g_session_id);
     END IF;
     END apps_logon;
(6) In my login page, i have created a process Get Username Cookie and with the process point: onload(Before Header)
     BEGIN
     apps.apps_logon;
     EXCEPTION WHEN OTHERS THEN NULL;
     END;
Now I am getting this error with the login page :-
ORA-06502: PL/SQL: numeric or value error: character string buffer too small Content-type: text/html; charset=UTF-8 Set-Cookie: WWV_CUSTOM-F_1120314105059329_811=B4134623EB436033; path=/; Location: f?CallFromForm='Y'&p=811:38
Please help me figure out the problem as I am struggling a lot with this from last few days :(
Thanks in advance.

Configuring php5 with enable XML on OAS 10.1.3.x

My requirement is to enable XML on OAS 10.1.3.5.
I am not sure how to configure it, so I stated using separate PHP5.2 to configure with XML enable on the server. After installation, when I am starting the opmn services I am getting below error. I think the error with platform. Which means current OS version is 64bit and php5.2 stage is 32bit version I guess.
OAS_HOME=/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS
URL : http://nacisdell277.us.oracle.com:10330/phpinfo.php
I used below command to configure :
./configure prefix=$ORACLE_HOME/php with-config-file-path=$ORACLE_HOME/Apache/Apache/conf --with-apxs=$ORACLE_HOME/Apache/Apache/bin/apxs
with-oci8=instantclient,/u20/app/MSRV1P/apmsrv1p/oracle/product/instantclient_10_2 with-config-file-path=/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/php5--enable-sigchild enable-xml enable-simplexml enable-libxml enable-dom enable-simplexml enable-xml enable-xmlreader enable-xmlwriter enable-simplexml –with-xsl -with-zlib with-xml --with-libxml-dir
Error :
/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 247 of /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/conf/httpd.conf:
Cannot load /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/libexec/libphp5.so into server: /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/libexec/libphp5.so: wrong ELF class: ELFCLASS64
I checked in the Metalink for “configuring php5 with enable XML on OAS 10.1.3.x” but I couldn’t find anything.
Please advise me on this.
Thanks

Hello;
You can try installing glibc-devel to fix this.
However on my version :
Application Server Control Release 10.1.2.3.0 - PHP 5 does not seem to work. The conflict on mine is that PHP 4 came wrapped in the Oracle install and they don't play well together.
Make sure your httpd.conf does not have this in it :
LoadModule php4_module libexec/libphp4.soI'm NOT advising you to remove it if its there, I'm merely pointing to a possible conflict.
Best Regards
mseberg
Later
Glad you don't have the same version as me. Hard to find anything on this, found these ( Not exact matches )
http://php.net/manual/en/oci8.installation.php ( Search for ELF )
http://enlinea.creaelicita.cl/guia/oci8.setup.html
http://docs.oracle.com/cd/E17390_01/doc.650/e17370.pdf
Found this in the pdf : ( Similar )
If the following error is received:
*ERROR* - obssocookie: could not dlopen()
/opt/netpoint/AccessServerSDK//oblix/lib/libobaccess.so:
/opt/netpoint/AccessServerSDK//oblix/lib/libobaccess.so: wrong ELF class:
ELFCLASS32
This indicates that the 32-bit version of the Access Gate SDK was installed instead of
the required 64-bit version. Edited by: mseberg on Feb 4, 2012 5:53 AM
Still later
Another thought is the PHP forum :
PHP
Also you need the 32bit Instant Client to be able run PHP. See http://blogs.oracle.com/opal/entry/using_php_oci8_with_32-bit_php
Same OS message :
ORA-03106: fatal two-task communication protocol error
Edited by: mseberg on Feb 4, 2012 7:03 PM
Rogue Notes from my Fusion Middleware on Red Hat 5 64 bit
I downloaded php-5.3.5.tar.gz from http://www.php.net/downloads.php.
Download the OCI headers http://www.oracle.com/technetwork/middleware/ias/ociheaders-134541.tar
environment
export ORACLE_HOME=/u01/app/oracle/product/fmw/oracle_pfrd
export ORACLE_INSTANCE=/u01/app/oracle/product/fmw/fr_inst
export CONFIG_FILE_PATH=$ORACLE_INSTANCE/config/OHS/ohs1
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/ohs/lib:$LD_LIBRARY_PATH
Configure with Oracle Database (OCI8) support:
./configure with-apxs2=$ORACLE_HOME/ohs/bin/apxs prefix=$ORACLE_HOME with-config-file-path=$CONFIG_FILE_PATH with-oci8=$ORACLE_HOME --disable-rpath
httpd.conf
# And for PHP 5.x use:
AddType application/x-httpd-php .php .phtml
Edited by: mseberg on Feb 4, 2012 7:19 PM
Edited by: mseberg on Feb 5, 2012 11:48 AM

Server app : random errors in configuration applied with configuration profile

When I verify the informations contained in the user configuration profile with both the profile manager and textmate everything is ok. When i installs the configuration profile on a computer there are errors in the configuration of Mail app the email address is configured as follows: [email protected] instead of: [email protected] and username is: [email protected] instead of : user1 . Both server and client computers are on running mac os x 10.8.
thanks for the help !

When I verify the informations contained in the user configuration profile with both the profile manager and textmate everything is ok. When i installs the configuration profile on a computer there are errors in the configuration of Mail app the email address is configured as follows: [email protected] instead of: [email protected] and username is: [email protected] instead of : user1 . Both server and client computers are on running mac os x 10.8.
thanks for the help !

Configuration problem with external Western Digital My Book 2 TB drive

How do I fix a configuration problem with my external Western Digital My Book 2 TB drive which used to both read and write. Something has happened so that the drive is now read only? There is 600 GB of data on the drive that I cannot lose, thus am very concerned about messing around with formatting the drive which is raid 1 and filled with data.

may not like to hear, but I'd skip on MyBook cases, nice looking as they are.
Get a 2nd drive case to recover to.
http://www.macsales.com/firewire
may need to play with the demo Data Rescue 3 from Prosoft
Backup/recover before repair is usually in order
never have one backup set. THREE sets of your data, minimum.
3rd party disk maintenance and repair should be a must and given rather than rely solely on Apple Disk Utility.
Data and system maintenance and recovery plan - should be like practice for sports, arts, military with practice and making sure you will know how and the tools you need - ahead of time
Resetting USB/FW ports, try another if one won't work. When 10.6 came out there was a lot of grinding teeth with external drives not working or mounting.

Configuring Disco with R12

Similar Messages

Maybe you are looking for