Configuring EP to Backend ECC system

Hi Experts!!!!!
How can we add a backend system to a stand alone ep7.0 system.Can you please post the links or send me the documents to [email protected]
Regards,
Vamshi.

Hey Vamshi,
Check out this blog. It gives you the steps to configure Singl Sign On between Portal and a ERP System.
Quick Guide for setting up SSO between EP and R/3
Before that you would need to create a "system" in the portal system landscape representing the ERP System. The template you would need to choose is "SAP system with load balancing".
Check out the following links.
http://help.sap.com/saphelp_nw70/helpdata/EN/1f/bddf3d48b05d5ae10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/ea/d4df3df2ad685ae10000000a11405a/frameset.htm
Reward points if helpful.
Regards,
Abhishek

Similar Messages

Provider Webservice in Backend ECC system (NW 7.0, Enp1) and PI /XI 7.0,

Hello
Our backend ECC is on EnhP4 (there by NW 7.0, EnhP1), As I understand, since NW 7.0, SP 14, webservices runtime has been changed significantly to support asynchronous webservices (through WS-RM).
This ECC system is connected to our PI 7.0 system. In the back end ECC system, when I create ABAP server proxy for a synchronous interface from SPROXY, the generated proxy is also visible as a service in SOAMANAGER. However, when I do the same for asynchronous interface, the service is not visible in SOAMANAGER.
Is this an expected behavior? Does this mean, we can only expose 'out side in' approach webservices in synchronous mode if the ESR is of version 7.0? The reason I say this is when I connect the same ECC system a PI 7.1 system, I am able to expose asynchronous services that are generated out of SPROXY.
The intent here is to design the interfaces in XI 7.0, expose them as web service in ECC and consume the webservice using another EAI tool that supports WS-RM.
Any help will be appreciated.
Thanks
KK

Stefan
Thanks. Your answer makes sense with what we are observing. Do you know if this is documented somewhere in help documentation or some note.
On another note what doesn't make sense to me is why this limitation? Not sure what I am missing. Doesn't the webservice runtime in NW 7.0 support WS-RM from SP14. Why should it be dependent on the version of PI in case of point to point webservice. Unless you say we can use WS-RM in back end NW 7.0 through PI 7.1's WS adapter only.
For me this sounds like a limitation on the NW 7.0/SP14 side. What do you think?
KK
Edited by: Krishnakumar Ramamoorthy on May 31, 2009 5:50 PM

How to call data from backend ECC system in Gateway Hub System?

Hi Experts,
We have a scenario where the GR process has to be done on Mobile app. We have a SMP 3.0 and Netweaver gayeway deployed as Hub.
I really need quick pointers on how should we go about this?
My queries are mentioned below:
1.I don't see SAP data in Gateway system.So will we need to create RFCs in ECC and call them in Gateway system.
2. Will we need to install IW_BEP in backend system? Can someone explain its real purpose?
3. How do we do our data modelling? How do i define it if I don't have my SAP data structures in Gateway system.
Your guidance will really be appreciated.
Regards,
Saket.

Hi sanket,
Answering to your second question,
IW_BEP Component is used to handle the events and actions activated in the SAP system and to publish these events and actions through SAP NetWeaver Gateway.
The BEP functionality enables you to:
Obtain and publish Business Object Repository (BOR) events without writing code. For example events raised as a result of changes in a business object: because of changes in a sales inventory, an event is raised and published to SAP NetWeaver Gateway.
Obtain and send events for SAP Business Workflow, for example, an event is raised for a workflow user decision step.
Obtain and send events from your code, for example, events raised as a result of implemented customer code, such as BAdI implementations.
Read more about IW_BEP at:
Business Enablement Provisioning (IW_BEP)
https://help.sap.com/saphelp_gateway20sp08/helpdata/en/a2/15f0b42f2948f6bb9e51f98e8c39e9/content.htm
Development with IW_BEP in SAP Netweaver Gateway
https://help.sap.com/saphelp_gateway20sp05/helpdata/en/64/472d8e21a342ba9d83e403ff4cd9db/content.htm
Hub Odata Channel without IW_BEP
http://help.sap.com/saphelp_gateway20sp06/helpdata/en/32/5895449ac74783a3bd80a782c82f85/content.htm
Regards,
KK

Solman system configuration to monitor a ECC system

Hi Experts
I know theer is something called system monitoring in solman system.
Can you help me wtith the guide of solman 7.0 to do such configuration.
Cheers
Pooja

i have referred all these links.
but not what i wanted.
i am looking for a guide for system monitoring purpose.
to configure a ECC/NW to solman and monitor its performance.
Can any one help me in this.
Regards
Pooja

How to find out Shopping Cart created in backend system or ECC system

Hi All,
I am new to SAP SRM7.0. The Client has implemented "Extended Classic Scenario". i.e. SC>Approval>PO>Confirmation>Invoice process in ECC.
We created few SC with "Free text" i.e. Describe what you need option in SC.
The SC is created with 4 digit number 2690. Also, the Status " Approved". since its low value.say 5 GBP.
I have like 25 to 30 SC created like this: I need to know the following:-
1. When i open SC and look for Related document, i see only SC number , but no Follow on document. not sure why ?
2. How can i know the list of SC in backend system. i.e like ECC of the SRM backend system. Please let me know the table name it get stored.. I searched EBAN and found only those which has PO is stored.
also can you please advise if by creating the SC in SRM.. will get replicated in ECC system ?. or only if Follow on doc gets created it will get replicated in ECC system?.
Thx
MJ

Hi,
SC is never replicated to backend.
Extended scenario document flow is SC -> SRM PO(Main) -> ERP PO(Copy).
Please go to BBP_PD transaction and navigate to SC item detail. You see what is the follow-on document.
Regards,
Masa

RSA1 - ECC 5.0 Backend "Source System" shows up as a BW System?????

Hello,
I'm working in RSA1 on my development BI system (BID) building a source system connection to our R/3 (ECC 5.0) (DEV) backend system. I've got the logical systems defined and assigned, clients opened, and users built.
Here's the issue:
When I build the connection to the backend ECC 5.0 system, it's coming up as a BIW system (see Message Test below - that' from the log)
My question is - is it seeing it as a BW System, versus an R/3 System, because in ECC 5.0 BIW is integrated / delivered within ECC 5.0?
Cut-and-paste from the log entry where
Message Text
Creating logical Business Information Warehouse on source system PRDCLT100

Hi Ajay,
I first click the scroll note button above "Display Node Log" then see the second message in the log below which says "Creating logical Business Information Warehouse on source system ........"
All messages there are status "green" i.e. informational versus warning or error..

The backend of system SAP_R3_UWL is not configured for optimized delta pull

Hi All,
I used the below to configure the Enabling Delta Pull Mechanism in UWL.
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
uwl_service user created and assigened role SAP_BC_UWL_SERVICE with the help of Note 873932 - Additional note on authorization of uwl_service user. But still i am having the below error:
The backend of system SAP_R3_UWL is not configured for optimized delta pull
Thanks,
Anumit

Hi Sean,
I have done everything that is mensioned in the Help.
Thanks,
Anumit

Error while registering SAP ECC system in UWL systems

hi,
Error while registering SAP ECC system in UWL systems.
Errors:
System R3Production: Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Nov 27 16:12:05 GMT+05:30 2008
(Connector) :com.sap.mw.jco.JCO$Exception:Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=132.147.0.112 SYSNR=00 GWHOST=132.147.0.112 GWSERV=sapgw00 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner '132.147.0.112:sapgw00' not reached
TIME        Thu Nov 27 16:12:05 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       79
ERRNO TEXT A remote host refused an attempted connect operation.
COUNTER     2
Item type retrieval and registration requires a connection to the systems and may take a couple of minutes
For each system, they are generated as the configuration named 'uwl.webflow.<system_alias>' or 'uwl.alert.<system_alias>'.
After configuration changes in the backend system, you must re-register the system.
regards.
Srinivas.

Hi,
you can check few things prior proceeding:
Does your connector test after adding your backend system in portal works fine?
Did you define a system alias?
Make sure your SSO is working,
Also check your Jco detination webdynpro tab.
Regards,
Vamshi.

SRM 7.0 PO not replicated to Backend ECC 6.0 Ehp 4

Hi SRM Gurus,
SRM 7.0 SP 8 - ECC 6.04 SAPKH60406 ECS
RFx Response to PO -
SRM Local PO is created and is in held status. Purchaser gives the source of supply and Acc Assignment and order it.
PO now is in Ordered status.
Issue: this PO is not replicated to Backend ECC 6.04.
Did the Debugging as follows:
1. BP at B46B_DPO_TRANSFER.
2. Got the PO GUID from the BBP_PD transaction.
3. FM BBP_PD_PO_TRANSFER_EXEC, execute it and it stopped in the breakpoint.
4. On 'FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination', hit F6.
5. Checked lt_bapi_return details.
Here there should be information regarding some error during the PO copy to backend.
With this error message you can check why the PO was not created in backend.
ERRORS from Backend are as follows:
1.   No instance of object type PurchaseOrder has been created. External reference:   E BAPI 001
2.   Document contains no items       E    ID 06   Number 010
3.   Please enter items first.              W   ID 05                 005
No XML messages in SXMB_moni both in SRM side and ECC side.
What am i doing wrong here? Any help is highly appreciated.
with regards,
Freemind

RZ20 errors:
Local Errors:   Business to Business Procurement(600)
Error reading export data for EXEC transfer of purchase order
Error in local purchase order; no update of references in EXEC system
Backend Errors:
PO 3000000051: No instance of object type PurchaseOrder has been created. External reference:
Purchase order 3000000051: Document contains no items
Purchase order 3000000051: Transfer Failed; Resubmit
Since we are in SRM 7.0 ECC 6.04 Ehp 4, with PI 7.11 + ROS and no SUS.
doent the system uses ESOA Service for PO replication.
We did CCTR / CPPR scenarios too. Both are sucessful.
Do we need to impl BADI PUR_SE_PO_INTERFACE_OUT_SELECT
But thats for Service hierarchy and Service POs - We dont have Service hierarchy or SUS in our SLD.
IF PO replication also uses PI, what configuration do i need to do?

Asking ECC System Credentials while Displaying Employee Photo in CODService

Hello All,
Currently we are having requirement like , need to display the employee Photo from Portal.
Already all the Employee Photos are Uplaoded in the backend, i can able to see employee photos on Hearder in PA30.
While Displaying the Employee Photo from the Portal using COD Service, it asking the ECC System Credentails.
What Configuration steps need to follow to display the Employee Photo in CHange Own Data Service from the Portal with out asking the backend system Credentails..
Plz Share some inputs to fix the issue..
Thanks in Advance
Adapag

Hi Pramod,
Thanks for the reply, we stored all our employee photos on ECC System Only...
If i enter the Personal No: in PA30, i am able to see the EMployee Photos on the Header..
But While accessing the COD Service from the Portal, asking ECC system credentials to display the photo.. If i am providing the Credenials Employee Photo is displaying .. other wise Blank Image Displaying...
Siddarth suggested its due to SSO problem, if its sso issue, how come i login into portal without any errors currently we are using ABAP UME both Portal and ECC Login details r same...
Please Suggest me how to fix the issue...
Thanks in Advance
Adapag

Trouble using LogonTicket for SSO to ECC System

Hi,
I am trying to connect to an ECC System from my portal. I created a system object and filled all relevant fields. When I run the Connection Tests the Connection Test for Connectors fails with
"Connection failed. Make sure that Single Sign-On is configured correctly"
I have imported the portal certificate into my backend system. But I still think that there is something wrong with the PSE on my ABAP side...
When I run the transaction SSO2 it says that the "The Digital Signature for This Certificate Cannot Be Verified" and that there are no entries in the certificate list.
When I open STRUSTSSO2 the certificate appears in the Certificate List and in the ACL as it should be...
Any help solving this issue would be appreciated...
Thanks ahead,
Bernd

Hi Bernd,
Check the parameters in RZ10.
login/create-sso2_ticket = 2
login/accept_sso2_ticket = 1
Good Luck
Grilo

Creation of sales order in CRM and replicating it to Multiple ECC system.

We have a requirement for creation of sales order in CRM and replicating it to Multiple ECC system.
We have checked the following standard Adapter objects in transaction R3AC1.
BUS_TRANS_MSG
The initial flow contexts does not support target site type as R/3(SMOF_ ERPSITE). So we are not able to replicate the sales order from CRM
to ECC.
2. SALESDOCUMENT
Here the initial flow contexts does not support flow from CRM -> R/3 as we don’t see the target site as CRM.
Please let us know if the standard sap middleware objects don’t support the sales order flow from CRM to multiple ECC or is there any
other adapter object we need to use for this.

Hey Vijay Duvvada,
I hope you are already referred below sap note and which explains scope & how to do -
1084315 - Consulting: Information about the multiple backend scenario
1763516 - How-to: Basic Setup of MEP
As explained by Rohit Sharma data should be start flowing to multiple sites.
please let me know if it does help.
Regards,
Arjun

Replicating custom texts in BP from CRM to ECC systems

Hi All,
I'm trying to set up synchronisation of a custom text held against a business partner in CRM with our ECC system. So, in CRM, if I go to transaction BP and go to change mode for a partner and then go to the long texts tab... As well as the 2 standard Correspondance and Accounting Note text ID's my functional consultant has also configured a third text, with ID Z001. We are trying to get this to synchronise with ECC.
With a bit of debugging I can see the text is being sent in a BDOC across to ECC but it isn't being populated into the customer master. On the ECC side the custom text has been set up against the sales area of the customer master - I'm not sure of what else has been done there.
Has anyone done this before who can give us some help/advice? Bear in mind I know almost nothing about CRM to ECC synchronisation and BDOC's so I'm struggling with this!
Thanks in advance,
Gareth.

Hi Gareth,
While researching this issue I came across note number 622133. https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=622133&_NLANG=E
Its an old note, but it pointed me in the general direction of FM 'PI_BP_MAP_TEXT_IDS_CRM_R3'. This FM looks in table 'CRMTEXTID' to check if any mappings were maintained. Now if you do a where-used on CRMTEXTID, you see that it is used in a view, V_CRMTXTID. So go to SM30, maintain that view, map your R/3 text IDs to CRM text IDs and you should be all set.
There must be a more elegant way to get to this table, but in the short term, this should fix your problem. I haven't tested it yet on my system but I get the feeling this should work

PR to SRM--Unable to see XML in ECC system

Hello,
We are on ECC 6 EHP4 and SRM 7.0. We are trying to send PR to SRM system. We were able to send requirements initially, but from past 6-7 hours none of the requirements are transferred. I do not see any XML messages generated.
Please help me in finding the cause of this behavior.
Note: No configuration changes are done in the system.
Thanks,
Arahanth

i dont think system uses XML messages to send PR from ECC to SRM system.
PR's are transfered to SRM and shopping carts created using RFC calls , please check the LOGS in the transaction SLG1 in both the SRM system and also in the ECC system.

SAP GRC 10 - PSS Access from SAP ECC System

I have configured Password Self Service in GRC System and is working perfectly fine for all password resets if access provided to NWBC from GRC System.
We have requirement to provide end users to reset password using SAP ECC System only. I have tried to access NWBC using SAP ECC System but is giving me error that Menu not configured or roles not assigned.
Currently Maintain Data Sources is configured as below
User Search Data Sources , User Detail Data Sources & User Authentication Data Sources set to ECC Connector and End User Vertification Set to yes.We are not using LDAP / Active Directory for the User Search Database and instead ECC Only
Can anyone provide the roles to be assigned in SAP ECC System to access NWBC - Password Reset .

Hi Anil,
In support to Colleen's comments, It seems that you have not configured the USER on the End User Services. You need to make sure that the guest user (not available in GRC) is configured in each of the 10 services in SICF for the end user Login Pages to work.
Here are the 10 required services to be activated:
1.)GRAC_OIF_MY_PROFILE_EU
2.)GRAC_GAF_NAME_CHANGE_SERV_EU
3.)GRAC_POWL_REQUEST_STATUS_EU
4.)GRAC_GAF_PWD_SELFSERVICE_EU
5.)GRAC_OIF_USER_REGISTER_EU
6.)GRAC_GAF_ACCREQ_WITH_REQREF_EU
7.)GRAC_OIF_REQUEST_SUBMISSION_EU
8.)GRAC_GAF_ACCREQ_WITH_TEMPL_EU
9.)GRAC_GAF_ACCREQ_WITH_USEREF_EU
10.)GRAC_UIBB_END_USER_LOGIN
You can refer note#http://service.sap.com/sap/support/notes/1628387
If the user is not present in GRC system then, they have to go with end-user-logon page to reset their passwords where you can always define the user authentication configurations.
Regards,
Ameet
Message was edited by: Ameet kumar

Configuring EP to Backend ECC system

Similar Messages

Maybe you are looking for