Configuring ESS on portal with HR module in R3

Hi ,
I have the ESS business package on portal . What needs to be done to configure it with the HR module at the backend R3 server ? The R3 server is ECC 5.0 .
Regards
Deepak Singh

Hi ,
I am following the below mentioned thread to configure the same .
ESS / MSS on ECC 5 install guide
I have a few quesions though .
1) It asks me to go to the visual administrator and choose SLD bridge from services and maitain parameters for HTTP connection . This is required to be done after SLD is configured . I have configured the SLD and set up the technical system in it . Now when I login to visual administrator there are two nodes "dispatcher" and "server" . If you expand both the nodes you get a node "SLD data supplier" which I believe is the same as "SLD bridge" that the above mentioned thread is refering to .I need to know in which of these nodes , "server" or "dispatcher" , i am required to maintain the HTTP parameter settings ?
2) The thread then asks me to take the help of
http://help.sap.com/saphelp_erp2004/helpdata/en/38/e8584c2a664547b60442646bee23b6/frameset.htm
and set up the required JCO connections . I use the URL
The URL is http://<host>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
to access webdynpro content administrator . It asks me to press "maintain jco destinations" button to make a new connection . This button appears greyed out in my screen . The only button that is active is "check sld connection" . When I press the buton it shows me a windown with all the fields greyed out and three buttons which say "test connection", "start sld" and "close" .When I press "test connection" nothing happens . When I press "start sld" it shows me a waiting/processing sign and nothing appears after that .
In the detailed navigation I have two nodes
- sap.com
- system defined content
I open the second node and then comes the node "jco destinations " .Below this appears the message "no connection to SLD" . As far as I think this is because data supplier bridge has not been started by me and this is the reason why I am not seeing the connection to SLD . Am i correct or do you think there is some other issue ?
I need help in my first quesion which I believe will resolve my second problem . Please let me know if there are any other suggestions .
Regards
Deepak Singh

Similar Messages

Portal with ESS error

hello,
i am trying to integrate ESS into portal and i've followed every step from the best practice N26: Employee Self-Service.
and some of the iviews are working but most of them return the message:
Service cannot be reached
What has happened?
URL http://<host>:<port>/sap/bc/gui/sap/its/catw call was terminated because the corresponding service is not available.
Note
The termination occurred in system E50 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:4-i:sap_E50_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
if anyone has any idee pls help

it's an ides 5.0
in se80 i have it and when i try to publish it i receive the message
"choose an ITS for publishing" and i don't know what to do.

Connecting Enterprise Portal with SAP ECC 6.0 for ESS/MSS

Hi,
I am trying to connect my Portal with the ECC backend but getting the error "SAP_R3_SelfServiceGenerics_MetaData". However when I tried to set the configuration in the JCo destination, I am not able to locate the message server for my ECC instance in the configuration page.
Any idea on this?

Hi,
Do the following steps.
1. Login to your SLD URL
http://hostname of sld:5<NN>00/sld
give the input as administrator username and password.
Once you are IN.
click on administrator TAB
Click on Profile TAB
In section TAB select DATASUPPLIER
Fil the detail in GATEWAY HOST and GATEWAY SERVICE ( SAPGW<NN>)
Gateway information should be on newly install gateway instance.
Then click on save.
Again click on Administrator TAB and click on STOP SERVER and then click on START SERVER.
Once above actvity done on SLD syste,.
Then go back to your ABAP stack in RZ70 and mainain the neccesary detatils and start the job, it should work now.
Thanks
Anil

Recommended configuration for load balanced Portal with load balancer, multiple gateways and multiple servers.

Does anyone have a recommended network, hardware and software configuration guide for a Portal installation running with multiple gateways load balanced (ie one URL) that talk to multiple servers?

David,
We've used Resonate (software) to load balance the gateways. It allows
you to group all the gateways under 1 virtual URL and load balance the
incoming connections over each gateway depending on the rules that you
define in Resonate. Look in the SUN portal whitepapers there is one that
talks about it specifically.
As far as load balancing the calls to the portals, the gateways will
automatically load balance across all the portals that they know about
using a simple round-robin rotation. You may be able to use Resonate in
front of the portals but you may need to activate persistance within
Resonate to ensure that the user always ends up on the portal that he
established his initial connection on (if you want that), check with Sun
on this one.
David Broeren wrote:
Recommended configuration for load balanced Portal with load balancer,
multiple gateways and multiple servers.
Does anyone have a recommended network, hardware and software
configuration guide for a Portal installation running with multiple
gateways load balanced (ie one URL) that talk to multiple servers?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Need help with the Modulation Toolkit to configure a QPSK Modulation

Hi! I'm
trying to build a CDMA system with the Modulation Toolkit to use it later with
a PXI-RF Product as a part of my thesis (I don't remember the exact model
number because it's in my university and I'm home right now, sorry). But my problem right now is, I assume, a very simple one.
I'm having
some trouble understanding the MT Modulate PSK.vi and the MT
Demodulate PSK.vi since I have them both connected and the output bit stream is
not the same as the input bit stream. I'm guessing it's a problem with the sync
parameters in the MT Generate Synchronization Parameter.vi because maybe I
don't really understand how the sync bits work. I tried using a simple
sync header but the output bit stream is always shorter than the input and shows
only a little portion of the input bit stream and some of the 1's I used to
create the sync header, and it gets worse when I increase the number of input
bits.
I'm
attaching the simple vi I created to try to understand the mod-demod vi's, so
if someone knows what I'm doing wrong it would be great if you let me know
since I'm stuck in my thesis and understanding this issue will let me continue
with the project.
Thanks a
lot in advance!
Daniel
Attachments:
QPSK Test V-1.0.vi ‏31 KB

Por favor mire en enlace abajo:
Cordiales Saludos
http://forums.ni.com/ni/board/message?board.id=6170&message.id=11549&jump=true
Luciano Borges
National Instruments Brazil
Luciano Borges
R&D Engineer
Pirelli Brazil

Configuration guide for EP7 portal with Solman

Hi,
I would like to know the procedure for integrating EP 7 portal with Solution manager. I have found few docs which are pointing to service market place but i don't have the market place credentials currently. Can someone attach the relavant docs or guide me on the procedure.
regards
Bharat

Closing as thereis no reply

What is the mean of using Portal with Role Based security as entry point

Hi Experts we have requirement of integration of Portal and MDM
I am completely new to the MDM. So please give me some idea , what is the meanin for following points.
1) Using the Portal with Role Based security as entry point for capacity and Routing Maintaince(These two are some modules).
2) Additionally , Portal should have capability to enter in to the MDM for future master data maintence. Feeds of data will need to be come from SAP 4.6c
Please give me the clarity of what is the meanin of second point
Regards
Vijay

Hi
It requires the entire land scape like EP server and MDM server both should be configured in SLD.
Your requirement is maintaing and updating the MDM data with Enterprise portal.We have some Business Packages to install in Portal inorder to access the functionality of MDM.
Portal gives you a secure role based functionality of MDM through Single sign on (login into the portal access any application) to their end users.
Please go through this link
http://help.sap.com/saphelp_mdmgds55/helpdata/EN/45/c8cd92dc7f4ebbe10000000a11466f/frameset.htm
You need to develope some custom applications which should be integrated into the portal to access MDM Server master data
The estimation involves as per your requirement clearly
Its depends upon the Landscape settings, Requirement complexity,Identify how many number of custom applications need to be developed
Regards
Kalyan

How to Configure and Integrate EP with CRM

Hi Everybody,
I want to integrate EP with CRM.
I am using SAP WAS Server.I have installed Portal.
I downloaded CRM Business packages.
1)How to integrate and configure in the EP with SAP R/3(CRM Module).
2)What are the prerequisities.
Plaese prove the exact help and documents.

Hello,
I think this <a href="http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N12_Scen_InstallGuide_EN_US.doc">Scenario Installation Guide</a> from the <a href="http://help.sap.com/bp_epv260/EP_EN/index.htm">SAP Best Practices for Enterprise Portal V2.60</a> can help you.
Regards
Gregor

SPNEGO in portal with abap data source + mapping on login & alias id

Hello
I successfully set up the new spnego autentification (with AD) on our EP7 portal.
Spnego module is configured with Mapping mod u201Cprincipal onlyu201D with source u201Clogin idu201D.
SSO is working perfectly for all users with the same u2018sap loginu2019 as the AD login. ( they can use portal to connect on all sap ECC6 server true iview without login& password )
But for user with login name different between AD and SAP , this doesnu2019t work. They have to enter their sap login & password on the portal. So spnego is not working for them.
Such user have different login name between AD et SAP because abap system limit user length to 12 caracters. So I could not change abap username.
And I could not change their AD login name. ( too much impact).
Exemple :
p.nametoolong = 13 character on AD but too long for abap
p.name = 6 ok for abap but different from AD login name.
So if I could not change login id I have to work on user mapping.
The Portal UME use our abab CUA as datasource. So I could not set up user mapping inside the u201Cuser management u201C
A solution could be that Spnego mapping use as source the u201Calias idu201D and not the u201Clogin idu201D.
So I have to set all the u201Calias idu201D. I can do a script for copying in su01 all u201Clogin idu201D to u201Calias idu201D and then edit the u201Calias idu201D of user with a different AD login. ( by the way do you know a tx for that ? )
But this is a little dirtyu2026 is there a simple way to do that ?
it would be perfect if i could do mapping on user id or on alias id if it set. So that i should only manage the alias id user with a AD name different... is that possible ?
thank you !
cdlt
GSV
Edited by: Patrick FABRIES on Oct 4, 2011 12:08 PM
Edited by: Patrick FABRIES on Oct 4, 2011 12:11 PM

Hi Patrick,
Even if you perform this operation, the situation will worsen overtime.
By the way, if you still want to do it, this is pretty simple: call 'BAPI_USER_CHANGE' with the username and pass:
ALIAS = <new alias>
ALIASX = 'X'
Isn't there another attribute that you could use as a pivot: e-mail, maybe?
Best regards,
Guillaume

Integration of SAP Portal with Shibboleth based CUA?

We are running SAP Portal NetWeaver EhP1 on LINUX RH-EL 5 with ORACLE 10.2.0.4. We are interested in integrating authentication to the SAP Portal with our web single sign-on system, which is based on Internet2's Shibboleth software. We would like to use our Shibboleth CUA to authenticate users and give them access to our SAP Enterprise Portal as well as to the SAP ABAP systems.
Has anyone done something similar and if so, what were the results or limitations encountered?
What is the underlying web server / product on which the Portal is based? Specifically, is it Apache httpd? If so, which version?
Can it support the use of third party Apache modules, e.g. the Shibboleth Service Provider (SP) Apache module for authentication?
If not, is it possible to run the portal fronted by Apache httpd? (Note that the Shibboleth SP software requires the use of Apache httpd on Linux servers.)
Can the portal be configured to honor the REMOTE_USER setting passed by the web server/container for authentication, instead of requiring a username/password to be entered?
If the portal cannot support the use of the Shibboleth Service Provider software for authentication, what are the other possible configuration options for authentication (besides username/password)?
What support, if any, is there for SAML-based authentication?
Will the portal interoperate with a Shibboleth Identity Provider (IdP)? Can you point us at documentation for this?
Thank-you,
Deb Nugent

Hi,
interesting questions. Portal is running on top of Netweaver platform (Java stack). Hence no Apache web server. I doubt that it supports any Apache modules. You can use Apache as reversed proxy in front of SAP portal. Check note 480520 with attached configuration guide. I don't know answer for your question regarding REMOTE_USER setting.
SAP portal supports all standard [authentication methods|http://help.sap.com/saphelp_nw70/helpdata/en/8a/cb136e68592f478266d19bb2b89766/frameset.htm] supported by Netweaver. Probably the only possible way is to use [SAML|http://help.sap.com/saphelp_nw70/helpdata/en/94/695b3ebd564644e10000000a114084/frameset.htm]. [Here|http://www.ibm.com/developerworks/tivoli/library/t-cssosap/index.html] is a how-to guide how to set up SSO based on SAML between Tivoli and Netweaver applicaiton server.
Also search on net. I found links to interesting presentations (e.g. [this one|http://www.switch.ch/aai/support/presentations/ws-sap-2010/ETHZ_AAI_SAP_SAML_Artifact.pdf]).
Cheers

Portal with LDAP

Dear all,
System details: ECC 5.0, EP 6.0 SP17, ESS
1.I have already installed Portal with abap option. But now the requirement is to get authentication for portal ess users by LDAP, how to do it without installation or should i install it again.
2.LDAP server is rehat open server. sap schema is created in ldap. what steps should i have to do in ldap server?
3.Do i need to activate ldap (manually) in abap system also?
4.How these portal users will be mapped to employee id
if they are authenticated in portal because i think in transaction HRUSER it gives the user list which are stored in abap system, or the user id,s must be created in both abap and ldap.
Can anyone give me the solution.
Imran Hasware
[email protected]

Hi,
The contents under "Configuring UME to Use an LDAP Server as Data Source" in the flwg link may be helpful,
http://help.sap.com/saphelp_nw04/helpdata/en/cc/cdd93f130f9115e10000000a155106/frameset.htm
Also go thru,
Authenticating R/3 users using LDAP
Regards
Srinivasan T

Transport process for configured ESS/MSS business packages to QA system

Hello Gurus!!
We have configured ESS and MSS business packages on NW 2004s portal DEV system. Everything is working fine now. Could anyone please explain me the process of transporting the configured business package content to the QA System. I know the general transport procedure for transporting content from one system to another system.
But wanted to make sure what it is like for transporting the business packages, for which lot of backend configurations have been done.
Any help in this regard will greatly be appreciated with valuable SDN points.
Thanks,
~LB

Hello All-
Could anybody share some thoughts on how to transport business package content from one system of the landscape to another system of the same landscape?
All valuable answers wil be highly appreciated with good SDN points.
This is urgent!!
Thanks much,
~LB

Portal with a URL using a Web browser in java stack

Dear all,
I can access the portal with our URL using a Web browser from your client machines .
i got the following option :
SAP Library
SAP Library contains the complete documentation for SAP Web Application Server.
Web Services Navigator
Web Services Navigator is a tool that gives you a short overview of a specific Web service based on its WSDL, and enables you to test your Web service by creating and sending a client request to the real end point.
System Information
System information provides administrators with an overview of the system configuration and its state. It shows all of the system's instances and processes, their current state and important parameters (such as ports) that may be required for support cases, as well as the versions of the components installed.
UDDI Client
The UDDI client provides query and publishing functions for different Web service entities (tModels, business services) to any UDDI compliant registry.
User Management
The user management administration console provides administrators with the functions they need to manage users, groups, roles, and user-related data in the User Management Engine (UME). Users without administrator permissions can use it to change their user profile.
Web Dynpro
Web Dynpro is a User Interface technology available within the SAP NetWeaver Developer Studio.
Various Web Dynpro tools provide administrators and application developers with performance measurement and application administration capabilities. The Web Dynpro runtime is already deployed.
SAP NetWeaver Administrator
A tool for administration and monitoring, offering a central entry point to the whole SAP NetWeaver system landscape. The SAP NetWeaver Administrator can be used in a central scenario where it is capable of operating an entire system landscape containing ABAP and Java systems as the application platform of SAP NetWeaver.
J2EE Engine Examples
This section contains several J2EE application examples that run on the J2EE Engine. The examples show some of the functions of both Java and the J2EE Engine. They can be easily deployed and tested by simply clicking on a button. The full source code of the examples is also available.
when i click System Information:
it ask user name () J2EE_ADMINand password (Installtion master password) ,after entered , i got below error .
You are not authorized to view the requested resource.
Details: No details available
Kindly suggest .

Hello
It means what it sais, your J2EE_ADMIN user doesn't have enough authorization.
Chech if the appropriate authorization is assigned in your abap stack which belongs to the java stack you logon to:
Role SAP_J2EE_ADMIN should be assigned to user J2EE_ADMIN.
Kind regards
Tom
Edited by: Tom Cenens on Dec 17, 2010 2:55 PM

How do I use Cisco MARS to monitor two ASA (active/stby) with IPS modules?

Hi
The two ASA with IPS modules are in active/standby mode. When I try to add both the two IP (active/standby) into the MARS, the MARS will complain duplicated hostnames.
How to setup MARS to monitor ASA with IPS with active standby topology?
Thanks!

Hi,
The fundamental problem with this scenario is that you have non-failover capable modules in a failover chassis - think of the ASA failover pair as one device and the IPS modules as two completely separate devices.
Then, as already mentioned, add only the primary ASA. (The secondary will never be passing traffic in standby mode so it's not actually needed in MARS) Then, with the first IPS module you can add it as a module of the ASA or as a standalone device (MARS doesn't care). With the second IPS module the only option is to add it as a separate device anyway.
In a failover scenario the ASA's swap IP's but the IPS's don't so whereas you'll only ever get messages from the active ASA you'll get messages from both IPS IP's depending on which one happens to be in the active ASA at the time.
Don't forget that you have to manually replicate all IPS configuration every time you make a change.
HTH
Andrew.

Using a different user(other than default PI user) with adapter module

Hi,
We are having a custom adapter module built to interact with a Hardware Security Module(HSM). This custom adapter module by default uses a PI user configured in the system. However, we are not able to pass commands to HSM because of insufficient authorizations to this PI user. Now, we do not exactly know the permissions required for the user to access HSM. We have asked the HSM support team about the same. However, I wanted to explore the possibility of using a different PI user to work with the adapter module and eventually pass commands to HSM.
We have an admin user configured which has all the necessary authorizations. Is it possible to use this admin user created on PI system to work with adapter module so that it passes commands to HSM?
Thanks,
Ravi Desai

We have given the necessary authorizations to PI user.

Configuring ESS on portal with HR module in R3

Similar Messages

Maybe you are looking for