Configuring fdomain in 11.1.1.5 on 64-bit Win 7
Hi,
I am trying to run config domain in SOA 11.1.1.5 Windows 7 install, I select 'Oracle SOA Suite for developers' check box and I have a popup message
CFGFWK-64972: One of the following needs to be selected:
Oracle SOA Management extension - 11.1.1.0 [jdeveloper]
Oracle SOA Management extension - 11.1.1.0 [oracle_common]
problem for me is that I don't see either option in the products list. How can I get where from or may be I am missing something, please advise.
I installed wls 1035 64-bit from wls1035_generic.jar and soa from ofm_soa_generic_11.1.1.5.0_disk1_1of2.zip, ofm_soa_generic_11.1.1.5.0_disk1_2of2.zip
Thank you
try to install jdeveloper first and then install soa suite
Similar Messages
-
Can Install & Configure Forms & Reports 11g on Windows XP SP2 (32-bit)
Hi All;
can install & configure forms & reports 11g on windows xp sp2 (32-bit)
regardsYes, Oracle Fusion Middleware (Forms/Reports) 11g is certified for Windows XP. Check out Oracle Fustion Middleware Supported System Configuations for more information.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
11g OID Configuration in High Availability Mode on OEL5.6 64 Bit
Hi Could you please provide me with some good document to install and configure 11g OID (Oracle Internet Directory) Configuration in High Availability Mode on OEL5.6 64 Bit.
Regards
Mohammed Riyaz AhmedHi,
You get OID 11g as part of OFM 11g. Refer here for docs on high availability:
http://docs.oracle.com/cd/E21764_01/install.1111/e12002/overview.htm#CJAJEDFC
For other OID docs:
http://www.oracle.com/technetwork/documentation/oid-089101.html
I hope this helps.
regards,
GP -
What Configuration for Thinkpad T400 running Ubuntu 8.10 64-bit?
Hello,
I will soon be assisting in the purchase of a new T400 for a friend of mine to use mainly for finishing up her Masters thesis on and also to use for her work as a teacher.
She will be going from an old Dell latitude x300 (which died of course) that ran Ubuntu 8.10 32-bit. I have finally convinced her that a Thinkpad T series is the way to go and that it is worth it to pay the extra money for durability and quality.
It will be pretty much a base system as she doesn't have a whole lot of money to play with but right now with the pretty huge sale going on I hope we can get a good deal.
My question is what kind of configuration should I go for while customizing the system? I don't want to opt for a wifi card that's going to cause problems etc.
I did look at the thinkwiki.org site and it looks like most things work fine but some things may have issues, though I'm not sure how up to date that information actually is now that Ubuntu 8.10 has had some time to mature a bit.
So what I would like to know is if there are any little things that may not work that I should know about:
Bluetooth - Looks like it works according to thinkwiki.org
What wifi card to use?
ThinkPad 11b/g Wireless LAN Mini PCI Express Adapter III
Intel WiFi Link 5100 (AGN) with My WiFi Technology [add $20.00]
Intel WiFi Link 5300 (AGN) with My WiFi Technology [add $40.00] [Lenovo recommended]
I'm thinking stick with the base option but maybe having AGN functionality will be worth it for somewhat of a futureproofing idea. Is the Intel 5100 worth the extra 20 dollars? Is it fully functional now? What is better about the 5300 chipset that makes it more expensive than the 5100 chipset? Are either of these worth it? I don't want them if they are going to need some kind of hacking to get to work.
Understand this computer is not for me. It's for an english teacher who is Not a techie at all. But is comfortable using Ubuntu for basic things. I just don't want an update to break wifi everytime like it did on her old dell with the boardcom chipset.
I'm thinking pretty basic for the screen: 14.1 WXGA TFT, w/ CCFL Backlight, Camera
How well does the camera work? Looks like it should work fine but I want confirmation of this. She will be using Skype with it preferably with video conferencing so that her 1 1/2yr old daughter can talk with her father when they move away this summer. So functional video is a must.
For card slot I'm thinking: Express Card Slot & 7-1 Media Card Reader
How well does the media card reader function? She will be using this to transfer photos off her camera. Regular sd cards work fine?
I appreciate everyone and anyone's input on this especially with this being a somewhat time sensitive purchase as the sale will end this week and she needs a new machine ASAP for her thesis writing.
Also, should would be getting the 6-cell battery instead of the default 4-cell. How much wiggle does a 6-cell have in the new T400's compared to the 9-cell in the T61's?
I purchased a T61 with 9-cell battery for my mother last summer (Running Ubuntu) and I must say the battery wiggle is absolutely horrible! One of the mounting hooks on the battery itself has become damaged and it's not from over abuse. I can't imagine the massive amount of flex/wiggle helped it at all.
I'm thinking a 6-cell on this one would provide decent enough battery life but not protrude as much as the 9-cell and hopefully be a bit more durable as I am not impressed with the 9-cell.
Oh and by the way, the video will just be the base integrated intel video, not switchable graphics as that will be unneccesary.
Sorry for the long winded post but I (we) certainly appreciate any clarity we can get!I see you have already purchased your T400. But for others reading this, I'd recommend going with the integrated (Intel) graphics rather than the discrete or switchable graphics. As jrsmartyn said, cutting-edge hardware can present a challenge with Linux. But Intel is much more active than ATI/AMD right now with Linux driver development. That doesn't necessarily mean smooth sailing with either choice: you'll need a recent distro for Intel graphics support as well. But the near-term future looks better for Intel than for AMD graphics support.
The switchable graphics is interesting if you require higher performance than integrated graphics can provide. But it's complicated and new and I've seen many complaints that it doesn't work smoothly, especially with Linux. Another disadvantage to switchable graphics is that it seems only the ATI graphics have access to the digital video outputs (integrated DisplayPort and DVI on dock). A better option than switchable graphics may be to use an Advanced Dock with PCI express video card.
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else. -
Unable to load application configuration?
All of a sudden, a couple of weeks ago, adobe flash stopped working in Internet Explorer 10. I've gone through all the steps I can find on the forum to try to get it
to load. I even uninstalled it and the plug in for firefox, but it still wouldn't download, even directly. The error message that boinks and shows up as the exe file is installing it is:
Unable to load application configuration.
I'm running windows 7 pro 64 bit, service pack 1
Internet Explorer 10, 10.0.9200.16635 v 10.0.7
Adobe Flash version is gone, now that I uninstalled it to try to install, but was trying to install the update that it alerted me to, that is version 11.8.800.94, I think.
I went away from IE when there was no adobe flash for 64 bit, but came back and have enjoyed it. I see others have had similar problems, seemingly around installing an update.
Thanks for anyone's help.Download and run the offline installers from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (nder the heading Progress bar hangs...).
-
Error while configuring Oracle 11g Forms/Reports Product during istallation
Dears,
We are trying to configuring Oracle 11g Forms / Reports during istallation.
OS using: Win 7 -- 32 bit
RAM: 4 GB
We have installed the following modules successfully.
Following are the steps which we have followed:
1. Installation of Oracle jdk's --> Successful
2. Installation of Oracle web Logic Product --> Successful
3. Installation of Oracle Forms & reports Products ---> Successful
4. Configuration of Oracle 11g Forms / Reports Products --> Failed
After performing step 4, we are getting an error in the .out file
Can anyone please let us know what we have to do for making the step 4 successful.
Following is the content present in the "install2012-08-30_04-43-55PM.out" file..
Setting ORACLE_HOME to C:\Oracle\Middleware\frs11.1.2
Setting Doracle.config.mode to true
Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/classic.jar
Adding to classpath:file:/C:/Users/id821839/AppData/Local/Temp/OraInstall2012-08-30_04-43-55PM/ext/jlib/template.jar
[email protected]lassicPage.ScreenRes
configFileName:C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM\ext\jlib\footprint.xml
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Reading response file..
Parse Warning at line number:15
MYORACLESUPPORT_USERNAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:27
PROXY_HOST=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:30
PROXY_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:33
PROXY_USER=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:39
COLLECTOR_SUPPORTHUB_URL=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:75
DOMAIN_PORT=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:90
STATICPORT INI FILE LOCATION=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:99
PROXY HOST NAME=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:102
PROXY PORT NO=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Parse Warning at line number:105
PROXY BY PASS ADDRESS=
Variables must be defined in a section in the format:VARIABLE_NAME=VALUE. No value found. Ignoring!
Validations are enabled for this session.
Verifying data......
In processErrorMsgStringOracle Instance
needWritableDirectory: false
needWritableDirectory: true
middlewareHomeLocation:C:\Oracle\Middleware
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
weblogicHome:C:\Oracle\Middleware\wlserver_10.3
weblogicHomeLocation:C:\Oracle\Middleware\wlserver_10.3
In processErrorMsgStringInstance Name
In processErrorMsgStringunknown
In processErrorMsgStringOracle Home
In processErrorMsgStringDomain Name
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator Password
In processErrorMsgStringunknown
In processErrorMsgStringAdministrator User Name
In processErrorMsgStringunknown
configuration Failed. Exiting configuration due to data validation failure.+
outputFile:C:\Program Files\Oracle\Inventory\logs\installProfile2012-08-30_04-43-55PM.log
in writeProfile method..
+[ENGINE] Adding C:\Users\id821839\AppData\Local\Temp\OraInstall2012-08-30_04-43-55PM for deletion.+
Thanks in advance..
Suhail
Edited by: 956027 on 30-Aug-2012 23:13
Edited by: 956027 on 30-Aug-2012 23:14Following is the last part of thecontent in .log file
This is the only part wher I have found the term "error"
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of domainName+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] domainName: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of wlHome+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] wlHome: C:\Oracle\Middleware\user_projects\domains+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.weblogicQueries.IsValidDomainHome] [SRC_METHOD: executeHandler] mwHome: C:\Oracle\Middleware+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] errID ====>>>>:INST-07277+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error:Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Cause:Specified Domain name is either not valid or the domain location already has a domain with the same name.+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Action:Enter a valid Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidDomainHome] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: weblogicQueries.isValidDomainHome+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: FAILED+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Error in validating Domain name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(DOMAIN_NAME) to:frsDomain. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(INVALID_TEXT_CHAR_MSG_STRING) to:unknown. Value obtained from:USER+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Inputs passed to the handler: [ FIELD DOMAIN NAME ( field ) = "Domain Name" ], [ DOMAIN_NAME ( val ) = "frsDomain" ], [ INVALID_TEXT_CHAR_MSG_STRING ( invalidCharMsgString ) = "unknown" ], [ Valid Character List for Farm Name ( regEx ) = "[\p{Alnum}_-]+" ]+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.engine.modules.handler.engine.HandlerLauncher$LaunchHelper] [SRC_METHOD: launch] Handler class: class oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch begin: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Entering method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of isCanBeBlank+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of val+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Value to be tested: frsDomain+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of field+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Text Field name: Domain Name+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of regEx+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Regular Expression: [\p{Alnum}_-]++
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of minlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of maxlength+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Fetching the value of invalidCharMsgString+
+[2012-08-31T08:46:03.570+02:00] [as] [TRACE] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] [SRC_CLASS: oracle.as.install.common.handlers.txtQueries.CheckTxtFieldUsingRegEx] [SRC_METHOD: executeHandler] Invalid Char Msg String: unknown+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for minimum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for maximum length+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Checking the value for invalid characters+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.checkTxtFieldUsingRegEX] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Exiting method executeHandler+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler launch end: txtQueries.checkTxtFieldUsingRegEX+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Handler returned status: SUCCESS+
+[2012-08-31T08:46:03.570+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000J_vRUGVCgoL5mRS4yZ1GG5qd000003,0] Setting valueOf(ADMIN_PASSWORD) to:<SECURE>. Value obtained from:USER+ -
Unable to open the configuration file
A new installation of Thunderbird, open the Thunderbird error, cannot open the configuration file, the configuration file is missing or cannot access. My OS:Win 7 32bit
Can you provide a screenshot of your problem?
http://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem -
Issue in 11.1.2 Essbase configuration on Linux 5.5 64Bit - Config hangs
Hi Experts,
I am trying to do a fresh install and configure of EPM 11.1.2 in a distributed environment:
1. Oracle database version 11.20as repository on Linux server 1(linux 5.5, 64 bit) installed and working fine.
2. I installed and configured HSS on a Windows 2008 server SP1 64 bit - configured following: common settings, database,OCM,deploy to Application Server - Success. and I am able to open the HSS front end and check users,groups etc.
Now, I installed Essbase server,EAS server,ES server,EIS server on Linux server 2(5.5,64 bit).
The Problem is: When I am configuring Linux server 2(All the above mentioned Essbase components) -
Configurator asks for "Previously configured SS database"- I provide the details
next -> it asks for ES,EAS database schema -> I provide the details
next -> asks for weblogic domain information -> 2 options there -> I choose- > Deploy to an existing domain -> All the required info was already there(Windows server above)
BUT, when I click "next" -> the screen just Hangs and does not go anywhere. I waited for 1 hr and nothing happened.
So, I cancelled it and started the config again, but again the same issue.
the message on the linux server console are:
"HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
ConfigurationManager not available"
and No logs are generated under /oracle/Middleware/user_projects/epmsystem1/diagnostics/logs/config
any help on this will be greatly appreciated!!
this is a bit urgent ..please reply.
thanks,
AnkitCan we even have the following landscape?
1. HSS,OHS,Weblogic server,workspace - On a Windows 2008 server
2. Essbase server,EIS server,EAS server,EIS server - on a Linux server
3. Oracle database on another linux server.
my questions is, can we have the installation and configuration done considering the OS (wid and Linux), as described in points 1&2 above.
I guess I read somewhere, that all the web applications can be deployed to either all windows or to all Linux OS servers? - Is it correct? -
Windows 7 install failure - hardware configure problem
Installing windows 7 64-bit using boot camp onto newly formatted drive giving it a 200gb partition in drive bay 1. Gets through most of the windows setup install then says:
'windows setup could not configure windows to run on this computer's hardware'
and shuts down. Tried booting from the windows install disc and repairing the install but nothing works to fix it.
HELP
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Processor): 12 MB
Memory: 6 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Serial Number (system): G88*****XYK
Hardware UUID: 31C79F11-B73E-568A-B90B-7349B48121DEThanks for the advice. I reinstalled Lion from TM back onto the main 1TB drive in bay 1, removed the other three drives. There were no external drives or anything external apart from my new apple kbd and non-wireless mouse. Tried the install again. Same thing, it gets through to 'Completing install, screen changes to finer resolution to match my cinema display 1920x1200 and then the same message comes up again.
'windows setup could not configure windows to run on this computer's hardware' and shuts down.
My graphics card is an old ATI Radeon HD 2600 with 256mb ram but i checked that it would work with windows 64 bit on the MS compatibility site.
I have two other pci firewire cards in the macpro as well both this type:
Type:
IEEE 1394 Open HCI
Driver Installed:
Yes
MSI:
No
Bus:
PCI
Did the windows install from a dvd-rom i made with disk utility from the 64-bit Win 7 iso image - complete windows install, not an upgrade
This is so frustrating. -
How do I configure Itunes correctly on a PC windows 7 64 bit after it say: "this version of itunes has not been correctly configured"?
Hi Ponquecito,
Thanks for visiting Apple Support Communities.
If iTunes isn't behaving as expected after a system restore on your PC, I'd suggest completely removing and reinstalling it:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
All the best,
Jeremy -
Key Commands corrupt using Configurator in Photoshop CS5
For me, when the Configurator Panel is open common keyboard commands for tools such as the brush or patch tool (any of them) no longer work. There is a brief pause, it switches to the tool you want, and then it reverts back to the tool you were using. Holding the key down will keep it visible, but let go and it reverts back to the tool you were using.
This totally sucks as I've grown quite fond of Configurator. It's a real time saver. Too bad they didn't incorporate a customizable tool panel right into Photoshop...
But at any rate, something seriously wrong here and I can no longer use Configurator 2.0. Hopefully there will be an update...but I won't hold my breath.
Suggestions welcome...I did create a panel from scratch just to see if that would fix things up. It didn't. I tried a panel without any keyboard commands on it (since that is what is effected) and that didn't do anything either.
LanceI'm having exactly the same problem as Lance with the Configurator V2 Panels. It's very frustrating and I've only just worked out that it's the Configurator Panel causing the problem.
It seems a bit intermittent but closing the panel fixes it instantly.
Dave -
What tasks I should select in NWA Configuration Wizard for PI component
Hello,
I'm in the stage of setting up the NetWeaver 2004S SR2. I've logged to the Net Weaver Administration console. According to documentation, to properly configure PI component I should execute Configuration Wizard task. The problem is that documentation is not very specific on what exact tasks I should execute, so I would like to get some advise from the community.
All tasks I can see are:
BI_00_This wizard will execute Postinstall steps of technical configuration of BI-Java Initial
DI_Allinone_This wizard run all post installation steps for DI, CBS, CMS and DTR. Initial
DI_CBS_This wizard run all post installation steps for CBS. Initial
DI_CMS_This wizard run all post installation steps for CMS. Initial
DI_DTR_This wizard run all post installation steps for DTR.
DI_This wizard sets the Oracle Parameters as per CSN note: 848708 Initial
MI_00_This wizard will execute Postinstall steps of technical configuration for the NetWeaver Mobile Infrastructures
MI_01_This wizard will create User and Assign Dedicated roles for the NetWeaver Mobile Infrastructure Initial
MI_02_create JCo Initial
MI_03_create TCP/IP
MI_04_register Connection Initial
MI_05_set profile in ABAP Initial
MI_06_schedule MI Job Initial
NWA_01_This wizard will execute configuration for local SLD Initial
NWA_02_SLD system : Connect SLD to CEN (if CEN present)
NWA_03_Creating a connection to the SLD and Setting required authorizations for SLD (CIM client settings)
NWA_04_Creating a connection to the ABAP stack of CEN and Starting heartbeat monitoring Initial
NWA_05_NWA system : Store access data per each managed Java system (optional) Initial
NWA_06_NWA system : Register each managed ABAP system to SLD Initial
NWA_07_creates Destination for Data Supplier Bridge
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Initial
PI_01_This template checks if the necessary services are started Initial
PI_02_This wizard will test the BAPI call to SWF_XI_BPM_AUTO_CUSTOMIZE Initial
PI_03_This wizard will assign the Application roles Initial
PI_04_This wizard will Maintain_Technical_System
PI_05_This wizard will configure the integration server for sld Initial
PI_06_This wizard will create the necessary Destinations in ABAP Initial
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server Initial
PI_10_This wizard will Register_Queues_NA Initial
PI_11_This template services are started
I guess I need to mandatory execute PI_XX tasks, but what about others - do I need to execute anything else (I need only PI component to be installed and configured)? Not sure if that makes any difference, but this is the very first time I get into the NWA, so no previous configuration tasks were executed from the Configuration Wizard.
My full system configuration: NetWeaver 2004S SR2 ABAP+Java, Windows 2003 32-bit with MS SQL Server 2005.
Thanks in advance.Hi Maxim,
Please follow this procedure:
1) Using Config tool Modify VM setting as per requirement (OS and H/W Dependent) Refer note 723909 Java VM settings for J2EE 6.40/7.0.
2) To set Environmental Variable refer Note 314530 - Number of RFC/CPIC connections for external clients. These parameter should be taken care while installing templates
Set these:
1) gw/max_conn 2000
2) gw/max_sys 1200
3) gw/max_overflow_size 40000000
4) gw/max_shm_req 200 (this is to adjust the memory allocation)
Profile parameters
rdisp/tm_max_no 5000
rdisp/max_comm_entries 200
ITS
CPIC_MAX_CONV 5000(Should be taken care that it should be set for <sid>adm user
3) Installing Template
Go to home page
http://hostname:portnumber/webdynpro/dispatcher/
Click Deploy and change
4) After This Click Configuration tab and then click Install
For the next tab select scenario PI
And configure template and finally install
5) In case you face any problem while importing please read these notes for altering parameters
Note 314530 - Number of RFC/CPIC connections for external clients
Note 923359 - Collective Note: Configuration Wizard - Template Installer
Hope it will Help you at this stage at development stage
You need to import SAP BASIS Software Component Version into Integration Repository based on your SP Level & XI or PI.
You need to download it from [service market place.|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ]
Regards,
Gagan Deep Kaushal -
Problem in configuring SSO using SAML for applications hosted on diff m/c
Hi Techies,
I am stuck in a weird problem for past month or so without any resolution. Not much help by googling. So I hope i get the answer from the mouth of the horses -
I am trying to use SSO using the sample application appA and appB as stated in the tutorial of SSO by BEA.
I am summarizing the problem below -
Steps followed for Configuring SSO using SAML
1. Created 2 domains on 2 seperate machines namely domainA and domainB
2. Source appliction is deployed on domainA and the target application is deployed on domaninB
The steps mentioned in the following tutorial has been followed-
http://dev2dev.bea.com/pub/a/2006/12/sso-with-saml.html
3. As mentioned in the tutorial the certificate is generated using keytool utility. The same certificate is copied
to WEBLOGIC_HOME/server/lib of destination machine.
4. The certificate was successfully registered on desitnation or host 2 but while activating the configuration
changes(SSL client Ientity Alias and SSL Client Identity Pass Phrase) for Federation services the following error
is thrown -
" SAMLBeanUpdateListener: SAMLKeyManager.prepareUpdate() failed with exception:
weblogic.descriptor.BeanUpdateRejectedException: SAML key Manage failed to validate key (SSL Client) configuration
in the FederationServicesMBean, key alias: testalias "
The interesting bit of the problem is that the same configuration works on 2 domains created on same machine. The
problem only occurs when domains are created on seperate machines.
Alterative to the problem: when the certificate is generated seperately for domainB and copied to
WEBLOGIC_HOME/server/lib, it works. However, the certificate generated in domainA should have been copied.
Note: I am using Weblogic portal 9.2.1
Any quick replies will be much appreciated. Thanks.
Edited by saurabh.agrawal at 02/06/2008 2:01 PMHi François,
You are right about the use of the NameID format. But the issue here is/was that OIF at SP is integrated with OAM, and the authenticated user at OIF-SP and OAM will be the Anonymous user rather than the user who was identified at the IdP even though the remaining attributes sent are for the IdP user. I think these attributes can be used by with OAM for authorization using custom authorization plug-ins but haven't tried that one out.
As for the attribute sharing profile, it's this one - http://www.oasis-open.org/committees/download.php/18058/sstc-saml-x509-authn-attrib-profile-cd-02.pdf, although for the life of me, I cannot remember why I suggested this in the first place!
-Vinod -
Hello.
I've recently received a configuration for an iMac and I'm a little bit confused.
iMac 21.5 - inch.Dual core i5(2.7 Ghz,3MB)/8 GB DDR3 1600 Mhz,HDD - 500 GB - 5400 RPM,256 GB Flash,Intel Graphics 5000,Camera FaceTime HD,Slot Card SDXC,10/100/1000 Base-T GigaBit,OS X Mavericks;iLife
I'll be using it for Photoshop work so I asked for a good processor, enough RAM and a SSD.
I can't find anything about any dual core i5 2.7Ghz. There's only dual core i5 1.4Ghz or quad-core i5 2.7Ghz.
So is there a mistake in the configuration? And what do you think about it?
Thank you!No errors in your configuration. Please contact AppleCare, if you bought the machine new or Apple refurbished you have 90 days of complitmentary telephone support. You can also check theTech Specs of your machine by visiting Apple's website. I would start by looking at:
https://www.apple.com/au/imac/specs/ -
Workspace error: hps.browser is not configured
We have installed and configured Planning and our users access Planning via Workspace. They access Workspace using the URL: http://hostname:19000/workspace/index.jsp
I have one user that gets an error when she logs into Workspace. The error is:
“Required application module hps.browser is not configured. Please contact your administrator.”
A little bit of background on our environment:
<ul>
<li>We are on System 9.3.1.5.
<li>Shared Services user authentication has been externalized to MSAD.
<li>When they log into Workspace, users are shown a list of reports. A native Shared Services group called “Hyp_World” is granted access to all reports. The Hyp_World group has been provisioned the following roles in Shared Services:
<ul>
<li>Analytic Servers: Server Access
<li>Hyperion System 9 BI+ : Explorer
<li>Hyperion System 9 BI+ : Viewer
<li>Planning : Interactive User
<li>Planning : Planner
<li>Planning : Offline User
</ul>
<li>All MSAD users are members of the Hyp_World group
<li>The user that is receiving the error is also a member of the following native Shared Services groups:
<ul>
<li>Hyp_Acct_Salary
<ul>
<li>Membership in this group restricts access to salary data within Planning
<li>All Planning users (with the exception of Finance users) are members of this group
</ul>
<li>Hyp_Ent_IFS
<ul>
<li>Membership in this group determines the cost center for which the user can view data in Planning
<li>The user that is receiving the error along with 4 others are members of this group
</ul>
</ul>
<li>The Hyp_Acct_Salary group has been provisioned the following roles in Shared Services:
<ul>
<li>Analytic Servers: Server Access
<li>Hyperion System 9 BI+ : Explorer
<li>Hyperion System 9 BI+ : Viewer
<li>Planning : Planner
<li>Planning : Offline User
</ul>
<li>The Hyp_Ent_IFS group has been provisioned the following roles in Shared Services:
<ul>
<li>Planning:Planner
</ul>
</ul>
When this user logs into Workspace she gets the error: “Required application module hps.browser is not configured. Please contact your administrator.” None of the other 4 users that are members of the Hyp_Ent_IFS group get this error.
The user (with the error) can access Planning data via SmartView so it can’t be an MSAD authentication issue. After she gets the error in Workspace, if she clicks OK to get past the error, she can navigate to Planning and access her data. She doesn’t see the list of reports and hence cannot execute any of them.
I’ve looked through the Essbase server log and the Planning Application log and didn’t find anything. I’ve looked through the Workspace log and didn’t find anything there either.
I’ve removed the user from all 3 Shared Services groups, refreshed Security Filters, added her back in, refreshed Security Filters and she still gets the error. None of the other 4 users in the Hyp_Ent_IFS native group have this error when they log into Workspace. They see the list of reports.
Does anyone have any suggestions? Is there some debug parameter that I can turn on to see additional log data as she logs into Workspace to determine why she is getting this error while none of the other 4 users in the same group are not?Turns out the user's preferences was set to open to Scorecard. Since we don't use Scorecard those services are not up and hence the error "hps.browser is not configured". I had her change her preference to default to Explore and now she is able to login without error.
Maybe you are looking for
-
Printer defaults not propogating down to clients
I've set up a copy of server 08 r2 as a print server for my organization. It is currently managing the print jobs for 5 printers, all Ricoh/Lanier. When I set up printer defaults like two-sided black and white the defaults do not show up on the print
-
Hi experts, I have created a Y-table and have created table maintenanace generator for the same.I have a report by means of which i enter data into this table. i have given serial no. as a primary key. Now my requirement is that as the records get en
-
HT204365 how do i save my digital booklets
how do i transfer all of my digital booklets to a memory stick
-
I cant get videos to just play without stooping and starting on YouTube.Should I update ISO?
-
Audio sync issues with adobe flash media live encoder stream
Using Adobe Flash Media Live Encoder to produce a 24/7 streaming network through Brightcove platform. No matter what I do or how I configure audio and video, there is ALWAYS an audio sync problem that developes. HELP??