Configuring flash debugger 10 IE with FlashBuilder 4

can any of you shed some light on getting the flash IE debugger 10 to work with FlashBuilder 4
As of 6/17/09,
I found the link to download the IE flash debugger at :
http://www.adobe.com/support/flashplayer/downloads.html
There was a link to download the IE Flash player debugger
Download the Windows Flash Player 10 ActiveX control content debugger (for IE) (EXE, 2.03 MB)
I've downloaded and installed the IE flash player debugger, set a couple of breakpoints in my FlashBuilder project and run in debug mode.
I get a popup message with the following:
Installed flash player is not a debugger
C:\Windows\System32\Macromedia\Flash\NPSWF32.dll
Flash builder cannot located the desired debugger version of Flash Player. You might need to install the debugger version of the Flash player or reinstall Flash Builder.
Do you want to try to debug with the current version.
Is there some special configuration or setup required in FlashBuilder?

for some reason, I installed an archived version of the FlashPlayer 10 debugger and everything is now debugging fine.
As of 6/9/09, here is the the link to the archived flash players.
http://kb2.adobe.com/cps/142/tn_14266.html

Similar Messages

Using flash debugger player with Flex application

I am building my first Flex app and have run into a problem that I can't figure out. When publishing a .swf in Flash I sometimes run the debugger to generate the swf. When I do so, I can view the swf through my browser (using the debugger version of flash player) and the exceptions that are thrown include a stack trace (complete with line numbers) of any error that occurred. I have tried running the debug compiled version of my swf from Flex and it does not show the line numbers.
Is there some way to do this? I have several thousand lines and the location of the error is tough to figure out becuase it is an instance where I am casting an event to the wrong type through my typed params for a function. So, for example, I am dispatching a MouseEvent but the listener function has a typed parameter of Event instead.
Can someone please point me in the right direction?
Thanks.

Thanks for the feedback. Our debugger documentation definitely needs to be refreshed. The PPAPI debugger on Chrome is even more complex. I blocked some time out on my calendar for Friday to try and get these revised.

Strangeness with CS3 Flash Debugger

Hello friends,
I'm relatively new to Flash, but since I bought the new CS3
this summer I've made a concerted effort to learn how to use it in
my projects. One thing I've never been able to understand is the
debugger -- it just seems inconsistent? If I set a breakpoint and
Debug the SWF *sometimes* the debugger will correctly stop on the
appropriate line of code. From there, I can load the panel which
shows the active variables, state, etc. More often than not, when
debugging with breakpoints (or even a SINGLE breakpoint) the
debugger will stop when it encounters the breakpoint, however the
little arrow that shows where the execution has stopped is not
there -- its still just a little red circle indicating a
breakpoint. I can use the step in/step out commands, but I see no
feedback as to where the execution is taking place. Usually I end
up just issuing a "Continue" command, but that defeats the whole
point of a debugger. I'm quite familiar with debugging with Visual
Studios, Borland products and GDB on Linux. I feel like there is a
deficiency (or something I'm not aware of) with the CS3 Flash
debugger. Has anyone else experienced this bizaare behavior?
Your comments are appreciated.
Thanks! :)
PS: Initially I thought this problem only existed when I
typed AS3 in the frames of my SWF (because it seemd to work when I
wrote a separate .as class and linked it to the SWF as the document
class, however now even that assumption is failing me.

hmm when i buy this soft
http://www.wa7oef.org/manufacturer-Adobe.html
Support of this site help me in all my problemss

Flash Debugger vs Player

I am getting a strange error that happens only in the debugger. The regular flash player itself has no problem running .swf but the debugger throws a type coercion error.
Before this I had issues with security, and external files couldn't be loaded correctly. I am guessing these are still some how connected.
How can aleviate this headache, that I am getting only in the flash debugger.
I assume by matching the configuration of both utilities, but I am not sure how, or if it solve my problems.
-Robert Baindourov

Sounds like whoever wrote the code to check for flash version
stuffed it up.
Without seeing your site, and the script involved in
detecting the flash
version, its impossible to tell why its not working.
Check out the flash detection kit from Adobe that has all you
need to
correctly detect flash versions
Jeckyl

Suddenly Can't Connect to Flash Debugger

Out of the blue today my flex builder stopped breaking at
breakpoints. While trying to troubleshoot I discovered that if I
right-click on the flash application, and choose Debugger, I can
try to connect on either LocalHost or Other Machine. I clicked
Connect with LocalHost selected and got the following error:
"A connection to the Debugger or Profiler could not be
established by Adobe Flash Player 9."
I tried to use Other Machine with my local IP address, as
suggested in another forum, but it also failed.
I've got the latest Flash debugger, and my firewall is turned
off. Does anyone have a clue as to why this would suddenly start
happening after months of the debugger working?

I checked out my Flash Version on the site above and it looks
like it's fine.
quote:
Your Player Version: WIN 9,0,124,0
Debug Player: Yes
Operating System: Windows XP
Video Capable: Yes
Audio Capable: Yes
Local File I/O Enabled: Yes
The odd thing is that the trouble seemed to start out of the
blue. I've been debugging in FireFox for months, then one morning
it can't connect to the debugger. Luckily I can debug in IE, but I
still don't know what's up with FireFox.
Thanks for the suggestions.

Firefox is extremely slow when the Flash Debugger 10.1.53.64 in installed and trying to debug Flex appls.

I have been using the Flash debugger in the past (WIN 9.x) and this worked fine. Currently I am using v10.1.53.64 to debug a Flex application.
== This happened ==
Every time Firefox opened
== I installed Flash debugger (10.1.53.64)

Hi Pavan, If you are having the same issue with Flex SWF, etc. please see my Post # 2. Starting your own thread is always best in the proper forum.
Thanks,
eidnolb

Where is flash debugger version 10.3? [SOLVED]

Hi there,
is there a debugger version of 10.3, I don't seem to find it anywhere on adobes site. My Flash Builder says that I didn't downloaded the right version of the flash player?
what can I do?
r. Sandor
FB4

Hi, I see you have the 10.3.181.15 Installed. A thread was just put up that that has been updated to 10.3.181.15 here:
http://forums.adobe.com/thread/858902?tstart=0
I haven't had time yet to see the release notes, so am not sure if any audio issues were involved or not.
The new version is for Windows and IE9 only so far. http://www.adobe.com/software/flash/about/
Well you've done most of what would normally be done. I just read something this morning about audio while searching for something else. I'll see if I can find it.
This is from the other thread you posted to:
I have tried turning the active x on and off with mixed results. On most web sites with video and the active x on the video won't display and a link will appear to download the flash player. With Active X off the video will play, but no sound. I have also downloaded the suggested patch for 10.3 player and still the same results. (no audio) The only place I get video and audio together. is on Microsoft's Windows 7 support page.
Any suggestions? ( I am also on IE9 on W7x64)
You may want to go to C:/Windows/SysWOW64/Macromed/Flash Right click on the Flash and post back the files listed. I don't need any log info, just want to know what Flash Files and version#'s are listed.
Then using IE, go to Tools, Manage addons under "Show" and let me know if Shockwave Flash Object is Enabled & if the version # is 10.3.181.15.
Thanks,
eidnolb

Flash debugger Extremely slow

I am currently using Flash Builder 4 and building my first project with FlexSDK 4 .
To debug the application I installed the Flash debugger version plugin (v10.1.53.64) for FF .
Don't know if there is some parameter I need to set, but it is Extremely (imagine the caps ) slow. Actually I just cannot work this way.
I have been using the debugger before and it was extremely powerfull and fast. Don't know what the problem is. I already reinstalled a few times, no luck however.
Anyone ?
thx

I have found the problem.
When using the default player, it ran as usual (thus fast ....) . Once using the debugger it became horribly slow.
Then I started testing right into the folder where the application was deployed. Then I found a missing file.
However , I thought when copying a file into the src, Flash Builder automatically created a duplicate in the debug folder. This did not happen and that is why the application locked up (as it could not read the file).
So what is the proper way to handle missing files programmatically. ?
thx
eG

Configuration flash player pour windows8.1 en vue d'un bon fonctionnement,Merci

j'ai modifié windows8 en windows8.1.J'ai toujours flash player sous son ancienne version,veuillez m'aider svp à configuré flash player pour windows 8.1.Merci beaucoup.

8.1 installs IE11. It's a "rolling train wreck." Literally thousands of pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Flash debugger needs an expression-watch window

Hi.
I would like to propose in next update of (CS4 or CS5 - if it hasn't yet implemented) to add an expression-watch window.
I want to use Debugger to find a bug, inside a movieclip, that has dynamic created other movieclips and I want to check some variables. Utilizing the debbuger as is now, for this case, is almost useless - I use trace() instead.
I.e.
var ny = mmask.y-DCs[Cur].y;
I want to see the value of DCs[Cur].y.
In order to see this, in current debugger, I have to:
1. Check "Cur" variable. I.e. Cur == 5.
2. Open Object "this" and find the DCs
3. Open Object DCs[5], and search for y.
It's total timewaste... ...a "trace(DCs[Cur].y);" command is faster - and repeatable in any re-run!...
I never used the Flash CS3/CS4 debugger, because of the lack of such a feature. I don't know if it exist - if it is, please inform me on how to do it.
Add a "watch" variables window, that will allow expression that will refresh them.
It would be excellent - for debugging - instead of using "trace()" to dynamically check code and expressions, to add the "trace" string, into a window of the debbuger, and it to be validate automatically in each refresh (every step/forced refresh).
Thus instead of using trace() here and there in my code, with identifiers in the string, to know where the trace is refering, I would use the trace strings in that expression-watch window - organized in tabs (groups).
It would be great, if we could use and multiple tabs - to set groups of watch-expressions. (I.e. in C++, MSVC 6, had 5 tabs for such reason - and you could add more (and name them)). It also would be great, if those tabs and their watch-expression, could be saved into the file, during saving - thus then to restore them as is, during .fla loading.
I am hoping in CS5 to have add that feature.
That would be a great power for Flash Debugger (replacing trace() with Debugger UI tracing window -> expressions-watch window!), and it would be a really good reason to use it - and/or buy Flash (instead of free applications) for that professional reason.
Btw, also please add the feature to saving the Actionscript Tabs into the .fla file!... It's annoying thing, everytime i am reloading a .fla file, to have to re -set the Actionscripts tabs, in order to continue my work!...
Ps. If this message, is not going to be seen from developers of Flash, please tell me where to add the aboves suggestions for future updates of Adobe Flash - or add them, yourselves!

These are user to user forums, and Adobe employee visits are few and far between. Submit your ideas via the link below...
Adobe - Wishlist & Bug Report
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Unable to connect to flash debugger

I just installed Flex 3, and I am unable to connect to the
flash debugger using firefox or IE on vista x64. This worked with
all the betas. Anyone have this problem?

This worked flawlessly before, now I see slow delays on
starting the browser as well as unable to connect each time. I
disabled firewall and still nothing. I am on Vista x64.
Now I have another dev pc at home with Vista x64 and that
works fine. Any ideas? I have uninstalled, both the adobe debug
players, as well as Flex 3. It used to work fine with Flex beta 3.
I need to find my download of beta 3. To roll back till there is a
fix for this.

Flash Debugger not working since upgrade to FB4

I installed FB4 this morning on OS X 10.6 and have not been able to use the debugger mode since.
Whenever I start a debug session the launcher always stops at 57% waiting to connect to debugger.
I have tried uninstalled the Flash Player, restarting and installing the player again.
I have been using the flashplayer_10_plugin_debug_ub.dmg file from Adobe's site. It is dated 26 Feb 2010.
This is so annoying and has seriously soured my go with the new version. I had such high expectations too.
Anybody else had a similar problem?

Okay, rather embarrassingly, the fault was in the HTML template for the page. The Flash debugger works fine when the flash file actually runs!
My fault, and everything suddenly looks really cool again.

Configuring JCo3 Connection Pool with single sign on on non SAP Java server

Hi Everyone,
i have configured a connection pool on JBoss as per JCo3 Documentation and is working great.
Now I need help to configure this connection pool with single sign on so that RFc on SAP ECC systems are executed using end users credential rather than using single user name password used to configure JCo connection pool.
On SAP Java stack I am sure its possible within Java WebDynpro and i assume using JCA resource adapter. But what if we don't want to use SAP Java App server.
Any help will be appreciated.
Thanks,
Divyakumar Jain

Eason, 你好！
I have exactly the same problem. Did you find a solution to this problem? If so, please let me know!

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

Unable to configure BI Publisher report with Primavera Unifier

Hello Friends,
We have installed Primavera Unifier 9.14 release on one Linux machine and OBIEE 11.1.1.7.0 is installed on another Linux machine.
For configuration, we shared OBIEE installed folder with the Primavera Linux machine.We followed all the steps that are mentioned in the configuration guide for OBIEE(BI Publisher) with Unifier.
While configuring BI Publisher Reports with Unifier,we are getting following error: Test connection failed.
"failed to create URL for the wsdl location: 'META_INF/wsdl/Catalogservice.wsdl' retrying as local file.
no protocol: /META_INF/wsdl/CatalogService.wsdl"
Unifier Log message:
ERROR: getCatalogInfo.ex=javax.xml.ws.WebServiceException: Provider com.sun.xml.ws.spi.ProviderImpl not found.
We have tested BIP login on Unifier application server machine and its working fine.
BIP END URL used: http://hostname:9704
BIP User: BIPUSER123
BIP Password: BIPUSER123
BIP Report Folder: ReportFolderName
BIPUSER123 user has admin privileges and also ReportFolder is having required access.
Is there any workaround or are we missing some configurations?
Thanks in Advance

configure one more virtual path which is unprotected from site minder. we had similar issue for Marketing and resolved by this virtual path.
ref:
http://vaandun-analytics.blogspot.com/2009/11/obi-publisher-with-empty-obi-catalog.html
Thanks
Sarathi

Configuring flash debugger 10 IE with FlashBuilder 4

Similar Messages

Maybe you are looking for