Configuring Groups and Transport Targets

Hi All,
I went through SAP help for this..i found this a little confusing.
Do i create groups DEV,QAS,PRD in XI development SLD. Or the groups should be there in the respective systems SLD.
In my case in Dev SLD only the development systems is visible in the SLD and in QAS the quality systems are visible in the SLD.
Do i need to show all the systems in each of the SLD?
Does the SAP help mean that we have only one SLD for the development, quality and production systems?
Regards,
Rahul

Hi Bhavesh,
I have different SLD. One each for DEV, QA, PRD.
i have installed CMS in development XI system
>>>>,<i> in the QA SLD , you would need the Dev and the QA transprot Group and then create the trasnprot targets for the same.</i>
Does it mean that in my QA SLD all the systems which are there in the Development system should be there?
Or shall i export the development SLD and then import it in the QA server.
Im on XI7.0 sp 9.
Regards,
Rahul
Message was edited by:
Rahul Jain

Similar Messages

How to Configuring Groups and Transport Targets ?

Hi Experts,
In my scenario i am having two XI Servers XI1(DEV) and XI2(QUA) each system is connected to different r/3 system.
If i transport object from XI1(DEV) to XI2(QUA) after defining Transport Target in XI1(DEV) as r/3 system connected to XI2(QUA) using file system would be fine (or) should i go for CTS?
Regards,
RajeshKumar.D

Hi,
You have to use Transpoprt method
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
1) Select the Business systems GroupEdit Groups
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

How & Where to create the Target Groups and Transport Targets for Business

Hi Experts,
I am Transporting the scenarios from Development 500 client XI system to Development 500 client PI7.1 system. I have taken the exports of Technical system and Business System from the DEV XI system and correspondingly have imported the same in the PI7.1 system. I can see the all the business system in the Business system SLD of the PI7.1 system. I would like to assign the Business System Groups and Transport Targets for every business system that I want to transport. How can I do that ? Whether this is to be done in DEV XI system or the DEV PI system? Can somebody elaborate the step by step method to create the Groups and Target system for the every Business system so that I can import the object of the Integration Directory sucessfully................................
Thanks & Regards
suk4023
Edited by: sukande on Aug 17, 2010 8:18 AM

Hi Supriya,
Thanks for the reply and good illustration............Still going further after defing the destination for transport in the source SLD Business system ( XI dev server) , then we should export it and subsequently import it in the SLD of the PI 7.1 ie the destination server. Then we should transport the objects of Integration Repository and Integration Directory to the new PI7.1 server. Is this the right way to proceed.? Hope that this will not give the error while importing the objects in Integration Directory. An typical which comes while importing the objects in the Integration Directory is as follows:-
*Import failed because of business system transfer of object Communication Component | PCM: Obligatory transport target for business system PCM not found in System Landscape Directory*
Pls clarify on this ......
Thanks & Regards
suk4023

Changing Original System and Transport Target System for Objects

Hi Gurus,
I need to do mass transport of all the Infoobjects to newly defined system. Since these objects have different Original system. Its giving me error. Again, for other objects, Transport Target system is QAS, But we want to change it to NBW (A new system to which we want to send transport) . I am able to change package of Infoobjects. Is there mechanism to change Original System and Transport Target for System? Please let me know ASAP.
Regards,
Harpal
Message was edited by:
Harpalsinh Gohil

If you simply edit your original post, it will go to the top of the list. There's no need to post duplicates.
Subjects with a subject of "Urgent" will be filtered out by a lot of responders.
Why not close this thread and bump the other one?
Rob

Configuring Feedback and "Load Target" VI's

I have configured an axis to accept the signal from the DAC as primary feedback. Next, I wish to be able to "load a target" into the program somehow so that the stepper motor will move until it is within some deadband of the desired digital bit signal (converted from load).
I tried the "Load Target Position" VI, but this appears to still be loading steps. Is this method correct, or is there another method by which to do this?
Message Edited by RWA on 07-08-2005 04:19 PM

When I try the analog method and try to configure the feedback, I get an error message along the lines:
"Cannot configure feedback to enabled axis"
So, I disabled the axis, configured it, then re-enabled the axis...then something like "Axis disabled, cannot complete move" came up.
Also,
Using the analog feedback doesn't return displacement (vertical) how do I get it to do that? I've referred to the attatched document many times and I feel as though it assumes that I am more familiar with the setup than I am currently.
Help!

Transport targets

Hi experts,
i want to define transport targets for business systems on XI 7.0. Where do I define that targets / groups? How to refer the group in the business system.
I looked at sap online help which is not actuell for this theme. Please dont post me links for older releases.
Regards, Udo

The official on-line help of NetWeaver 2004s
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm">Configuring Groups and Transport Targets</a>
Regards

How to Create groups and targets....

Hi guys,
Here is a chance of getting some easy points
I know that it may seem a dumb question but I can't find out how to create a transport group and a transport target....
I've read help.sap and some other threads related to the subject but all I was able to get was:
help.SAP.com
"Procedure
Defining Groups of Business Systems
Define groups of business systems for different areas of use (for example, testing and production) and assign an Integration Server to each group.
1. On the initial screen of the SLD, choose Business Landscape.
2. From the dropdown list box for the input field Groups, choose Edit Groups. "
Well I can't find where is the dropdown list....:S
I'm using SP10 and all I have in the SLD are 3 options:
1.Technical Systems
View and Define Systems and Servers
2. Landscapes
View and Configure Groups of Systems
3. Business Systems
View and Configure Business Systems for Use in Exchange Infrastructure (XI)
If I choose "Landscapes", the only thing I'm able to do is to create a landscape from a specific type (Adminitration, General, Transports, NWDI systems, etc....)
If I create a landscape with the type 'Transports" and then associate a technical System, I thought that in my Business System I would be able to choose this lanscape....
But The only thing I have is group and transport target and they're completely empty, showing "No additional groups available" and "No targets"...
Can anyone help me and get some easy rewarding points?

Hi Chirag,
I've read the following link, but the question is....
- Where is the link to create transport groups? That is my only question It's as easy as that
Found it...sorry I knew it was easy
Edited by: Gonçalo Mouro Vaz on Dec 20, 2007 5:13 PM

Transport Groups & Transport Targets Creation for BS

Hi,
I have DEV and QTY Servers And i have 2 seperate SLD's. i need to do BS Export.
In Which Server we have to create Transport Groups and Transport Targets????
Regards
Bopanna

Hi ,
Refer to these weblogs and links
Overview of Transition from Dev to QA in XI
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
Two types of transport mechanism are used in PI.
File transport method.
CMS transport method.
File transport method:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
CMS transport method:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
CMS for SAP Exchange Infrastructure:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
How to handle Xi with CMS:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
Configuration of CMS in Central NWDI & SLD to transport XI objects:
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
XI Software Logistics Solution III: CMS:
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Refer the configuring group and transport group for Business systems.
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
Transport mechanism
1. Create Technical System and Business Systems for the QA system.
2. Create Transport Groups in the Business System.
3. Create Transport Targets in the Source Business SYstem.
Try with this
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
https://websmp104n.sap-ag.de/nw04 -> SAP NetWeaver 2004 - Release-Specific Information -> How-to Guides -> Exchange Infrastructre
1. How ToTransport XI Content Using CMS
2. SAP XI 3.0 - Using CMS for SAP XI 3.0
Also
Look at the below weblog for XI transports.
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
CMS for SAP Exchange Infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
regards
Aashish Sinha
PS : reward points if helpful

Transport target for business system not found in System Landscape Director

Folks,
We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
We are getting following error when we try to import an interfaces in to new PID system:
Import failed because of business system transfer object
Communication component XID_FileSystem: Obligatory
transport target for business system XID_FileSystem not found in
System Landscape Directory
We are yet to install PIQ system.
All the interfaces in the old XID system have transport target of XIQ system. I removed the transport taget for the interface, but transport target is still showing in the Business system under transport target head.
How can we overcome this issue as we will not have PIQ system atleast for two weeks.
Thanks in advance,
Regards
Chandu

Hi,
You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
Illustrated with DEv & PRD here.
Procedure:
1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
2) Call SLD (System Landscape Directory) Component from the Integration builder
Save all the Following .zip files on the Local Desktop
3) Select the Software Component & say Export that you want to Export from DEV
Server to Production server and which is going to use in the IR of XI
4) Also Select the Product of the above SWC and say Export
5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
6) Select the Business System(s) & say Export; those are associated with above Exported
Technical systems.
In Production Server
1) Logon to the SLD of the Production Server.
2) Create a Technical System and Business system which points to the Production SAP R/3
3) Go to Administration TAB in the main page of SLD
4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
5) Click on Browse and select the .zip files that is to Import into Production Server,
Which were stored on the local desktop at the time of DEV Server Export
And say Import Selected File Option
By this we exported and imported the SLD Objects
Now we have to create transport groups and transport targets in the Production server of SLD
Creation of Transport Groups
Edit GroupsGroup1) Select the Business systems
2) Click on New Group and give the name of the group as DEV_group & select the
Corresponding Development serveru2019s integration Server
3) Similar way create another group for Production serveru2019s business system as
PRD_group and select the Production serveru2019s integration Server
Creation of transport targets
This is to Define which business systems in two different groups correspond to each other
1) Select each Business system in the SLD and select transport TAB---click on
Add/Change Target and select its corresponding target business system.
For Example:
If you select the business system of Production XI server means
In the target you have to select group as DEVGROUP and the business system of Development XI server.
Like this do the same for other business systems also
Ex:
BS_PRD_Integration Server----
BS_DEV_Inetration Server
How to create Transport Groups & transport Targets
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards
Seshagiri

Target groups and marketting compaigns

Hello all,
I am seeking for information about target groups and campaigns,
Where target group ID and compaign ID are stored?
Where can I find function modules that returns all bp's belongs to target group, and all target groups belongs to campaing?
All help wil be appriciated,
Rika

Hi Rika,
You will find campaign detials in table CGPL_TASK. Use function module CRM_MKTTG_TG_READ to get all bp's belong to target group.
Thanks
Swagatika

Import ID Configuration Scenarios and keep the same Business System names

Hi Guys,
Is it possible to transport ID Configuration Scenarios Objects between 2 XI systems and keep the same names for both sender and receiver Business Systems ? That is, to skip the SLD lookup for transport Source and Transport Targets systems ?
I tried to create the same Business Systems under the same name twice, but this was not possible. Any ideas ?
The reason is that I want to transport all the objects from one XI DEV server to another XI DEV server.
Thank you,
Best Regards,
Evaggelos Gkatzios

Hi,
We have done same but with bit of manual work (without Transport).
Create SLD object in target system with same name as in Souce XI system SLD.
IR & ID was exported using TPZ files from Source system & were imported in Target system.
It used same object names in both XI systems.
Regards
Sushil

Need to add Loading Grp and Transportation Grp for a material

Hi Friends,
I want to add the loading grp and transportation grp for a material using transaction MM02 but I am unable to do so. Also would like to add a few more views like plant storage and accounting view for the same material using MM01 but I am unable to see these views in the selection box.
Can anyone please tell me how can I do so.
Regards,
Wasim.

HI
Goto OMS2 and then double click on the material type and now select the required views in User Departments Tab.
To add loading group and transportation group you have to enter the Sales organization and distribution channel in MM02
regards
Prashanth

DELIVERY AND TRANSPORTATION SCHEDULE

HI
How we configured delivery and transportation's schedule in sap please explain configuration steps
Thanks in advance

Hi Reddy,
Delivery Scheduling and Transportation Scheduling
Shipping activities and transportation can be scheduled automatically in sales documents.
Picking/packing and loading, transportation scheduling and transportation can be planned and optimized on the basis of the dates determined.
There are two different types of scheduling:
Delivery scheduling
The SAP System takes into account the pick/pack time and loading time for a transaction.
You define the type of delivery scheduling for each shipping point.
Transportation scheduling
The SAP System takes into account the transit time and the transportation scheduling time for a transaction.
You define the type of transportation scheduling on the basis of the route (see sections "Route definition" and "Route determination").
You define for each sales document type whether delivery scheduling and/or transportation scheduling should be carried out.
For the dates to be determined automatically on the basis of the requested delivery for an order item, you must define both the times and what influences the determination of the date.
You need to carry out the following:
Define for each sales document type whether scheduling is to be carried out and, if so, which type.
Define the indicators for scheduling for each shipping point.
Define:
Pick/pack times
Please fallow below steps:
SPRO > Logistic Execution > Shipping > Basic Shipping Functions > Scheduling > Delivery Scheduling and Transportation Scheduling
STEP 1: Define Scheduling by Sales Document type
Here have to assign your Sales Document type to your Del and Transportation Scheduling if the system what to carry the Scdheduling Automatically.
STEP 2: Define Scheduling by Shipping Point
Here if you want to carry Determine Loading time and Determine Pick/Pack time Just select the "C"- Default for Shipping Point and give respective Hours/Days here.
STEP 3: Maintain Working Hours
Here can maintain shift like ( Morning, Afternoon Shifts etc., with respective Start and Finish time.
STEP 4:
Here we can difine duration for Shipping point,Routes, Pick/Pack time and Loading time.
Hope this solves your Purpose.Please Reward Points if really helpful,
Thanks and Regards,
Sateesh.Kandula

Transport target group and routes setting for 2 system landscape

Hi!
I have 2 system landscape (DEV with 2 Clients, 100 CUST and 200 TEST and PRD with productvie client 100).
Currently I have the standard TMS configuration for 2 systems (with tranport layers/routes ZDEV and SAP) .
Now I have to set up my TMS settings client specific
(Development in DEV 100 and transport to the DE 200 TEST and PRD 100).
I have created tranport target group /B-DEV/ with both target goals:
DEV 200 and PRD 100.
<b>What are the further settings for transport routes?
I assume, I have to delete the existing routes ZDEV and SAP?
what are the next steps? </b>
Thank you very much
regards

Ok, I have in DEV system:
Client 100 (Customizing)
Client 200 (Test) (it can be considered as replacement of QAS-system, because we only have 2 systems)
PRD system
Client 100 (Productive client)
So we would like to set up the transport management system client specific, in order to develop in DEV 100 to test in DEV 200 and to use the transports in PRD 100.
Thank you very for your help
regards

Transport target and transport groups

hi all,
i need to create,transport target and transport groups,wht is the use and how to create.
redards,
AVR

Did you check this help section: http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Can you close the other similar thread?
Regards,
Abhishek.

Configuring Groups and Transport Targets

Similar Messages

Maybe you are looking for