Configuring Integrated ITS for other browsers?

Is there a enhancement package or anything else provided by SAP to allow other browsers like Safari, Chrome, Opera and etc... to work with Integrated ITS w/o getting the ugly ITS error page saying the browsers is not supported?

Hi,
you can turn off the browser check in SAP ITS as it is described in note Note 972116 - Integrated ITS, browser invalid/not supported
by adding parameter  ~USERAGENTCHECK 0
Bets regards, Artem

Similar Messages

  • Adobe flash player for other browsers

    Hi all,
    I'm having trouble downloading ''Adobe Flash Player for Other Browsers'' I need it to watch video's with the steam browser.
    But when I download the installer and launch it nothing happends.
    So anyone know a way to fix it?
    Add me on skype: [removed by moderator]
    Thx all I hope one of you know how to fix it
    Message was edited by: Peter Spier

    http://forums.adobe.com/message/4041846

  • Installing Flash Player for Other Browsers on Win 8

    Hi,
    I would like to install Flash Player for Other Browsers (specifically for Steam) on my laptop which runs on Win 8 but I'm having issues.
    When I run the installation file and then click Yes in the User Account Control dialog box, nothing happens thereafter.
    I checked in Task Manager and the installer is indeed running but I don't see anything happening (been more than half an hour).
    I tried terminating the first instance of the program, downloading the file again, and running the installer - but the same problem arises.
    Please help! THANKS!

    Try if you have better luck with the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

  • Is there an Adobe Flash Player for other browsers for Mac?

    Please follow this link to see what i mean. http://get.adobe.com/flashplayer/otherversions/
    The first two system options windows etc give an option for other browsers but the Mac option does not.
    Is there a way to get a *for other browsers* flash player for mac?

    The reason there aren't two versions of Flash Player for Mac is that there is no longer an "Internet Exploder" for Mac since 2004. Windows has two builds because IE requires ActiveX controls and thus, a completely different architecture. The Flash Player for Mac IS for all other browsers.

  • Cannot sign onto my aol account today through firefox.. it works for other browsers..and usually works for firefox

    cannot sign onto my aol account today through firefox.. it works for other browsers..and usually works for firefox

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I'm using Captivate 8 and publishing courses to our LMS.  As an end user, I can complete a course using IE, but not Chrome.  Is there a setting that I am missing for other browsers?

    I'm using Captivate 8 and publishing courses to our LMS, Cornerstone OnDemand.  As an end user, I can complete a course using IE, but cannot complete the same course when using Chrome.  Is there a setting that I am missing for other browsers?

    guess what it says java file. So yes i'm sure. Sarcasm. Not the best way to encourage a total stranger to help you. Then there's
    Sorry if i wasn't more clear but was that response needed?No it wasn't needed, but I'm not the one asking for help so I have the luxury of not worrying too much about it. It's extremely frustrating trying to drag relevant information out of someone, and makes one less inclined to bother.
    Anyways, there's still nothing in this thread that actually explicitly says "there is a file called VolcanoApp.java in the directory where I'm running javac from" and I really can't be bothered banging my head against the wall any longer. You've made a silly mistake, or a false assumption. We all do it from time to time. My advice is, take a break, go for a walk and re-visit this in a while. You'll probably spot the mistake right away.

  • I have installed Adobe flash 11.0 repeatedly and it will work for other browsers, but Moxilla will not recognize it. How do I make it detect it?

    I have Windows 7 running on a new Dell Inspiron.
    Whenever I use Mozilla Firefox browser - it says I do not have Adobe Flash 11.0 installed. I know I do because if I open Explorer all sites needing Adobe Flash work.
    I must prefer to use Mozilla - is there a way I can get firefox to recognize the Adobe Flash I have installed?

    There are 2 versions of Adobe Flash:
    *an '''ActiveX version''' for IE only
    *a '''Plugin version''' for most other browsers including Firefox
    *On a Windows system, you should always update both individually.
    '''''You do not appear to have the Plugin version for Firefox installed. ''''' If you did, in Add-ons > Plugins you would see "Shockwave Flash ''(version)''". If "Shockwave Flash" is there and is disabled, click the "Enable" button.
    Check your Plugins often --> http://www.mozilla.org/en-US/plugincheck/
    *only the most popular/used Plugins are known by this page
    *page will detect only installed, '''''enabled''''' Plugins
    '''<u>Install or update Adobe Flash</u>'''<br />
    #'''<u>Using Firefox</u>''', go to the following link and SAVE the download to your desktop so you can find it later. Un-check any items on that page that you do not want to download (i.e., "McAfee Security Scan Plus":
    #*http://get.adobe.com/flashplayer
    #When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
    #Click or double-click on the file you just saved to your desktop
    #*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
    #*The "Install" button in the lower right corner will now be highlighted, click it.
    #*The installation is quick.
    #Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
    #To update/install the ActiveX version for IE '''''only''''', repeat the process, '''<u>but use IE to go to the above website</u>'''.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • How to configure Integration Directory for Integration process async sync

    Hi Experts,
                     I am confused about doing configuration in Integration Directory i.e receiver determination,interface determination and receiver agreement and sender agreement for my integration process as it involve synchronous send at target side.
    In my Scenario , we get Purchase order request(asynchronously) from SRM system in proxy xml format which we have to map to Cxml format send it to third party system(say system 2) as http request.Then we will recieve a response from system2 in Cxml format through HTTP.Now,we have to map this response as to SRM system via proxy code for successful and error case .If error occured we also have to mail to the respective department about the error occured via mail adapter.Proxy to XI is a asynchronous communication and XI to System2 is a synchronous communication .Then again XI to SRM is a asynchronous communication via proxy.I have request and response External defination for Cxml i.e HTTP side.
    I have done following integration process in ESR
    Start- Receive(1)---Transformation(2)-send(3)-Fork(4)--
    stop
    ...................................................................................................... .....[----Branch 1 [-Transformation(5)-Send(6)-
    .......................[-----Branch 2 -
    SWITCH STEP to check error code[
    ............................................................................................................[.otherwise branch of switch
    Fork(4)----[
    .......................[----Branch 1-Transformation (9)-send(10)-
    Here,
    Recieve(1) -- is used for recieve request from SRM.Mode is asynchronous
    Transforamtion(2)-- is used for operation mapping between request of SRM to HTTP request.
    send(3) --is used to sending request synchronous to HTTP,mode is synchronous,used synchronous abstract interface,abstract reqhttp and abstract resphttp
    switch-switch Branch1 is used for checking error response to be true---
    Transformation(5)--- is used to map HTTP response to Mail response structure
    Send(6)----
    is used to send mail content to Mail adapter
    Transformation(9)---- is used to map HTTP response to Proxy response
    Send(10) --- used to send mapped proxy response to SRM as to update status by calling calling Function module using proxy code.
    Thanks
    Deepak

    Deepak,
    In BPM data does not flow in Backword direction!
    take any step in your BPM the message it is goiong to receive will be what a step just before it is giving to BPM.
    Now in your case
    IR Part:
    You have to call Third part Synchronously and the input to it will be what Proxy has given to you.
    Create an Abstract Synchronous(in case of abstract you need not bother it is Inbound or Outbound) in which(I mean the Message Interface) The Output message will be what you have Received from Proxy and the input message will be what you are going to receive from the Third party as a Response.  Now you would have Inbound Synchronous Interface created for calling Third party.
    Have a Interface Mapping between the Abstract Synchronous and Inbound Synchronous Message Interface.
    ID Part:
    For synchronous Step:  BPM will; be sender with  Message Interface Abstarct Synchronous
    Third Party will be receiver With Inbound Interface(Synchronous). Use the INterface Mapping between Abstract Synchronous and Inbound Synchronous that You have created in IR.
    Have a Receiver Agreement for the Thirs part.
    No Sender agreement required in case of BPM as a Sender.
    Thanks,
    Sunil Singh

  • Need help for configuring integration scenario for AII

    Hi,
    We are referring to "RFID-Enabled Outbound Processing: Configuration Guide" for transferring materials from ECC to AII through XI.
    So far we have been successful sending the IDOC to XI.
    When we display the XML message in XI using IDX5, we get the error message "No receiver could be determined".
    I request you to help us with the configuration of the integration scenario in XI.
    Regards.
    Gaurav

    Hi Yogesh,
    Thanks for reply.
    Maintaining XI Directory configuration
    u2022 Generate business scenario using business scenario configurator
    u2022 Creating a scenario
                      It is fine upto these two steps
    u2022 assigning business systems
                      We have assigned "AII" business system
                      only (receiver)
    u2022 creating communication channels
                       Following parameters are set for comm channel
                        Adapter type: HTTP
                        Configured as Receiver
                        Transport Protocol: HTTP: 1.0
                        Message Protocol: XI payload in HTTP Body
                        Adapter engine: Integration server
                        Addressing type: URL Address
                        Target host: <name of AII system>
                        Service number: <service no>
                        path prefix: /sap/xi/engine?type=entry
    u2022 defining receiver determinations
    u2022 defining interface determinations
    u2022 defining receiver agreements
                       All these were generated automatically
    Are these configurations alright?
    Regards,
    Gaurav

  • Can no longer toggle to enlarge Twitter embed box; can no longer select category on Movable Type; works for other browsers.

    I can no longer enlarge the Twitter embed box or even select and scroll in order to copy and paste all the code. Also, in Movable Type I can no longer select the category for our entries. So "boxes" aren't working. They do work in Safari, so it looks like a browser issue. I'm on Firefox 16.0.1 and Mac OS X 10.7.5. Problem just started on October 12.

    You may have a problem with the "can't delete" or it may have been an isolated out of synch condition.
    I have noticed that the "express" watch/delete process only works when you watch from oldest to newest.
    also,there is that ridiculous extra step where it alerts you that there are no more episodes left. How about replacing that with an episode counter that tells how many are left when given the choice to watch more.
    After the last one, just move on like it works for everything else. Whoever had the idea to add the "no more" message must have done it intending to iritate cusrtomers. That is the only possible reason for it.

  • Configuring Internet Sharing for other devices

    I have set up Internet Sharing on a MacBook Pro. I am sharing the laptop Wifi connection over ethernet. If I connect a Mac to the laptop with ethernet, the sharing works fine--the Mac gets a DHCP address and is on the internet. However, what I am wanting to do is give an ethernet peripheral device an internet connection in this manner, and I can't get it to work. The periperal device will connect correctly if I give it an ethernet connection directly on my LAN, but for some reason the ethernet connection provided by the laptop doesn't work.
    On the laptop, (WiFi IP 192.168.1.166, Router 192.168.1.1, DNS 192.168.1.1) I have given the ethernet port a static IP of 192.168.2.1 and a subnet mask of 255.255.255.0. I have tried with the Router and DNS populated and unpopulated.
    From a packet dump in terminal it looks like the device makes a DHCP request, but nothing sends a DHCP reply, wheras when the Mac connects, the laptop sends a DHCP reply.
    Does anyone know what I'm doing wrong, how to fix this, or how to check the log for Internet Sharing to see if I can see anything helpful there.
    Thanks
    Doug

    I may have found a solution, but does anyone know if this 10.5 bug has been fixed by Apple? This was posted on an XBox forum as a workaround to the same proble--internet sharing not working with other devices:
    10.5:
    The following procedure is confirmed to work as written.
    Start Internet Sharing if it's not already running.
    In Terminal, type cp /etc/bootpd.plist /tmp/bootpd.plist
    Stop Internet Sharing.
    Open /tmp/bootpd.plist for editing using TextEdit or whatever.
    Locate this section of the file, near the end:<key>reply_threshold_seconds</key><integer>4</integer>
    Change the value 4 to 0.
    In Terminal, type sudo cp /tmp/bootpd.plist /etc
    Start Internet Sharing.
    If you want to, check that your change to /etc/bootpd.plist hasn't been reverted.
    So my question now:
    Will this fix the issue in 10.6 or is there something else going on?
    Doug

  • Https configuration on integrated ITS

    Hello Gurus,
    Can someone, please highlight the steps in enabling https configuration to the backend r/3 system from the integrated its for EP7 - java system. The portal content t is already enabled https.
    thanks & regards,
    Sankar.

    i assume that ICM (internet Communication manager)configuration is done and your concern is only about configuring SSO.
    the complete details are given in OSS note number 517860.
    there is alos a test BSP application to check whether SSO is configured. and the url for the same is
    http://wasserver.xxxx.com:<port>/sap/bc/bsp/sap/system/sso2test.htm?sap-user=<userid>&sap-password=<password>&sap-client=<client>
    Hope this helps.
    Regards
    Raja

  • Configuring ITS for EP7.0 to create Transactional Iviews

    Hi Everybody,
    This is urgent!!!!!!!!
    <b>
    Do we have to configure Internet Transaction Server for EP 7.0 to create Transactional Iviews?
    </b>
    with regards
    Brahmachaitanya

    What is your backend version. If it is ECC 5.0 or ECC 6.0 you need to configure integrated ITS.  There are some differences interms of features offered by standalone Vs integrated ITS.  Service marketplace will list them very well. (http://service.sap.com/sap-its)
    Thanks,
    -Bharath

  • Proxy Server asking for username and password almost 6 times for every page I load, but the same doesn't happen with other browsers like chrome

    The same question keeps popping up again and again "The proxy moz-proxy://proxy.iitm.ac.in:3128 is requesting a username and password. The site says: "moz-proxy://proxy.iitm.ac.in:3128""
    Even after i give the right details, it asks me like 5 more times before it completely loads the page. Some times it happens only 2 times.
    With other browsers like chrome, it asks only in the beginning. it doesn't occur after that.
    This started occurring only recently. i upgraded to firefox 9.0 and it functioned properly for more than 12 hours before it started occuring. i tried downgrading back to 8.0.1 but the problem still continued.

    i'm afraid i need to use proxy settings to connect to internet. The settings are all fine because it used to work properly all this time. i specify the proxy address and the port, which is correct, i am very confident. it is so because the page actually loads on firefox, but not before it asks for my user name and password for it a lot of times, and for every page. for other browsers, it asks only in the beginning, that is, when i start the browser.
    i've put three pics here. under the first two settings, the third image showing the user name and password thingy popping up. this happens a lot of times for every page.

  • Sound has stopped for firefox but works on other browsers! Why?

    I no longer have sound with the Firefox browser. Sound works for other browsers (Chrome, Safari, I.E.) but not for FF. I looked in options, plug ins, etc. I have done everything I could to get the sound to work again to no avail. This all started after the latest update for FF. Please help>

    Hi Skytyler13,
    There are a few different things that might be causing your issue. Have you looked at the Knowledge Base article [[No sound in Firefox]]? It has a lot of good information that might help you.
    Hopefully this helps!

Maybe you are looking for