Configuring Internet email, Hub transport, Client access (POP/IMAP) in Exchange 2010

Hi,
I was trying to configure Exchange Server 2010 for sending email to outside of the domain. For example I want to
send email from Exchange to Gmail. More over I also like to know how to enable Client Access
POP and IMAP in exchange server 2010. I already registered a
domain in Godaddy. How to configure Godaddy domain for enabling Exchange internet email configuration.
My atmosphere
Windows Server 2012
Exchange Server 2010 SP3
Domain host Godaddy
Any help highly appreciated. Thanks

The questions you have covers the full Exchange configuration!
To send an email outside, you need to create a send connector in Exchange 2010
http://technet.microsoft.com/en-gb/library/aa997285(v=exchg.141).aspx
You need to sort out your certificate and Exchange urls before enabling IMAP and POP. Both pop and imap services are disabled by default. You can go to services snapin and start the services by setting them from disabled to automatic.

Similar Messages

How can we set Admin rights to access all user mailboxes in IMAP server exchange 2010?

Hi,
IMAP is in exchange 2010..
as per guide:
http://technet.microsoft.com/en-us/library/jj200730%28v=exchg.150%29.aspx
CSV Files for IMAP Migration Batches`
Use super-user or administrator credentials. This requires that you use an account in your IMAP messaging system that has the necessary rights to access all user mailboxes.
In the CSV file, you use the credentials for this account for each row. To learn whether your IMAP server supports this approach and how to enable it, see the documentation for your IMAP server.
How can we set Admin rights to access all user mailboxes in IMAP server exchange 2010?
thanks?

Hi,
Do you mean assigning a user full access permission to all other mailboxes? If so, we can try the following command:
Get-Mailbox -Server “Exchange 2010” | Add-MailboxPermission -User AdminUserName -AccessRights FullAccess
Thanks,
Winnie Liang
TechNet Community Support

Does MS outlook 2007 in client machine is recommended in Exchange 2010

Hi All,
We have a users who uses an outlook via citrix. The outlook clinet on citrix servers is 2007 SP1 and recently there is an upgrade at Exchange server from 2007 to 2010 and all users mail boxes are upgraded to Exchange 2010. After upgrading users mail box to
2010, there are many issue like
1. Outlook takes more time to load for few users.
2. Gets a pop-up "trying to connect to Exchange server".
3. Due to this, performance of citrix becomes very slow. Citrix works fine once outlook closes.
4. Another strange thing.....there are 2 mailboxes under Exchange 2007, when we send an email from these mail box the mail shows in Outbox but mail got delivered recipients and will not show up in Sent mails.. :(
Could you please give me some suggestions.

For 1-3 problem, you may try to run Outlook in safe mode ("Outlook.exe /safe") without Anti-virus running and check whether the performance of Outlook against Exchange in Citrix platform is fine. If the problem is not caused by client, I think there might
be something configuration problem on Citrix or Windows Server site.
Here is a discussion thread with the same topic from Citrix forum
http://discussions.citrix.com/topic/310220-poor-performance-on-new-xenapp-farm/
For the Question 4, please check the following Outlook option to check the result.
File > Options > Mail tab > Save messages section > tick the option "Save copies of message in the Sent Items folder"
Tony Chen
TechNet Community Support

How to Get Outlook Client Version for MAC from Exchange 2010

Hi,
I want to know how many users in my organization are using Outlook for MAC or Email for MAC. What is the best way to extract this information from Exchange 2010 server. I can read the RPC Client Access logs by running logparser:
logparser.exe "SELECT distinct extract_suffix(client-name,0,'=') as User,client-software,client-software-version as Versio
n,client-mode,client-ip,protocol from 'D:\RPC\EXTC03\RCA_2014*.log' WHERE (operation='Connect') GROUP BY User,client-software,Version,client-mode,client-ip,protocol ORDER BY User" -nSkipLines:4 -i:CSV -rtp:-1 > D:\RPC\EXTC03\EXT
C03.TXT
How to extract Outlook for MAC clients from this command?
Hasan

Hi Hasan,
As far as I know, Outlook for Mac (Office 2011) uses Microsoft's EWS (Exchange Web Service). So you probably need to collect and focus on EWS logs, not RCA.
Anyway, Karl is right that you'd better post your question in our Exchange forum, where you can get more experienced responses:
https://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

POP/IMAP issue Exchange 2013

Hi,
I have started the migration of Exchange 2010 to Exchange 2013. Exchange 2010 is single server with all roles and Exchange 2013 with 1 CAS and 1 Mailbox. Initially plan was to verify the Windows XP users can connect with Exchange 2013 but there was a lot
of issues and stop XP machines migration. Windows 7 machines are working perfectly without any issue.
Now decided to configure POP/IMAP on XP machines. The test of incoming POP/IMAP is fine and receiving emails from internal to external domains but the SMTP is giving error
Send test e-mail: Your server does not support the connection encryption type specified. Try changing the encryption method. Contact the administrator of the mail server or Internet service provider for further assistance.
Can some guide what I am missing during the configuration.
Thanks

Following is the   Get-ExchangeCertificate | fl
AccessRules        :
CertificateDomains : {mailboxserver, mailboxserver.domain.local}
HasPrivateKey      : True
IsSelfSigned       : True
Issuer             : CN=mailboxserver
NotAfter           : 1/22/2020 7:53:11 PM
NotBefore          : 1/22/2015 7:53:11 PM
PublicKeySize      : 2048
RootCAType         : Registry
SerialNumber       : 434974nb7347497449794732
Services           : IMAP, POP, IIS, SMTP
Status             : Valid
Subject            : CN=mailboxserver
Thumbprint         : 434974nb7347497449794732
AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {}
HasPrivateKey      : True
IsSelfSigned       : True
Issuer             : CN=Microsoft Exchange Server Auth Certificate
NotAfter           : 12/27/2019 6:52:43 PM
NotBefore          : 1/22/2015 6:52:43 PM
PublicKeySize      : 2048
RootCAType         : None
SerialNumber       : 434974nb7347497449794732
Services           : SMTP
Status             : Valid
Subject            : CN=Microsoft Exchange Server Auth Certificate
Thumbprint         : 434974nb7347497449794732
AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule,
                     System.Security.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {WMSvc-mailboxserver}
HasPrivateKey      : True
IsSelfSigned       : True
Issuer             : CN=WMSvc-mailboxserver
NotAfter           : 1/4/2025 4:48:16 PM
NotBefore          : 1/7/2015 4:48:16 PM
PublicKeySize      : 2048
RootCAType         : Registry
SerialNumber       : 434974nb7347497449794732
Services           : None
Status             : Valid
Thanks

HT5567 Iphones and Ipads with IOS 6.0.x and later getting Calendar invitation even so that Delegate access is enable on exchange 2010 and outlook 2010

I'm Running Exchange 2010 with outlook 2010 in my environment, since Apple OS went from 5.x to 6.x I been having issues where the Iphones and Ipads running OS version 6.x or higher do not acknowledge that the exchange user has a calendar delegate and are automatically accepting the invitations, not allowing the Delegate to acknowledge first, If this test is run on any Apple devices running OS Version 5.x but less than 6.x the issue is not there.. any one that may have encounter with this situation got a fix or a possible resolution on it.. Thanks

Ok, well after looking at everything, I decided that the best solution was to uninstall an App called "Tango", as it seemed to 'mess' with contacts directly, and I only use it with 1 person, so switching back to Skype (plus Tango sends/shares lots of personal
info, location, and keeps changing it's access rights and doing stuff when you're not looking - I'm sure some people love it, but for me, it's a belts and braces get rid of anything that might have 'contributed' to this issue).
Found my un-sync'd contacts and emailed them to myself, then deleted the Exchange active-sync account. Checked what was left, found google had managed to sync some stuff, cleared that up too!
RE-created the account on the S4 - only need the email and password, as it finds the server and sets itself up automatically (I guess it did that previously).
All is now working, after about 5mins the data had been re-populated and it sync's new changes instantly. But I will monitor from time to time to check that new contacts or added numbers etc do sync. My best guess is that some index or other data became corrupt.
Just one of those things (or had I been tango'd?!).
On the Truncating Notes Issue, the S4 (realised that it's running Android 4.3) does chop a note but only if edited, at 1001 chrs. However unlike others, it seems to only truncate the note if you actually edit the note field, so adding a phone number or removing
one, leaves the note field intact!
To summaries other devices behaviour with the Contact record Notes Field:
- iPhone 3GS (on iOS 6.1.3) truncates at 32,777 chrs (so pretty big notes!)
- Samsung Galaxy Note 10.1 (GT-N8020 - Android 4.1.1) chops at about 1,000chrs, even if just adding a phone number to the contact - so not even editing the notes field
- HTC One X (4.2.2) at 5,122 chrs (when editing any part of the contact)
I hope this might help someone in the future if they have similar problems ...
cheers

Migrate client data from Notes to Exchange 2010

Hello!
We have no administrator access to Lotus Notes server and therefore we want to perform the client data (mails and contacts) migration. We need to move the mails
from Notes (8.5) to Outlook (2010 or older which will be connected to Exchange 2010).
Question: is it possible to do it without purchasing additional migration software? If yes, then what is the best way to accomplish this?
Thanks!

DAMO 8.0.2 supports Outlook 2007
It is available in two places:
(1) The IBM Passport Advantage Website.
(2) Located on the Lotus Notes "All Clients" CD in the Apps folder.
Is there an 8 release of Domino Access for Microsoft Outlook?
https://www-304.ibm.com/support/docview.wss?dc=DB520&rs=3025&uid=swg21265830&context=SSPQ69&cs=UTF-8&lang=en&loc=en_US&rss=ct3025lotus
MCTS: Messaging | MCSE: S+M

Configuring Internet Email Address in SCM

Dear friends ,
Would appreciate your support in giving me the process for configuring the mail in scm . I prepared a macro in the SNP Planning Book to get the planning results sent on email but I guess the mail configuration has to be set so that the address can be located post macro run .
Thanks
Prashant Kumar

Hi Prashanth,
Config interent email address.
In order to send PO by email, your Basis team must configure the system first so that external email can be send out from SAP. If it is not configured, no settings you do on MM will work.
1. You must maintain email address in vendor master data.
2. The same applies to your user master data. For the output type for default values, a communication strategy needs
to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the
Customizing via the following path:
(SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy).
As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
3. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
4. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
5. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
6. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
Cheers

My emails go directly to recover deleted items, in Exchange 2010

one user have this problem as in subject.
We changed also it's password domain, and tried only from OWA, and the emails stays only for a while in inbox (1 minute), and they dissapers.
Exchange is 2010, and other users are running normally.
From user's owa, on the rule settings, there is no rule.
What could I do? how to fix?
is something on exchange2010 wrong??
Lasandro Lopez

Hi Lasandro,
Since there is only one user has the issue and there is no hidden rules, I recommend you use the following cmdlet to repair the user's mailbox.
Note: While this task is running, mailbox access is disrupted only for the mailbox being repaired. After you begin the repair request, it can't be stopped unless you dismount the database.
New-MailboxRepairRequest -Mailbox [email protected] -CorruptionType FolderView, SearchFolder, AggregateCounts, ProvisionedFolder
What's more, here are some articles for your reference.
New-MailboxRepairRequest
http://technet.microsoft.com/en-us/library/ff625226(v=exchg.141).aspx
Create a Mailbox Repair Request
http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Migrating from POP/IMAP to Exchange Server 2013

Hi all, I have a system
my email accounts on an external system to which
I have no administrative access.
It is a Linux system.
I will migrate my email accounts from
Linux system to a Exchange 2013 mail system
in my CPD I'll ride.
How I can migrate the mailbox contents?
without the user being affected.
regards
Microsoft Certified IT Professional Server Administrator

How many users do you have on Linux Messaging Server?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Outlook 2010 client ask for credential when Exchange 2010 server restart

Hi,
Each time our Exchange server is restarted (most of time for update installation), all open Outlook clients are prompt for credential.
This is annoying because when the users come back, sometime they don't take care about the credential windows and believe that's they don't receive any mail and start to prompt the support when they notice that's their mail come to their mobile but
not on Outlook...
One solution is to ask everybody to shut their computer down every time an update of the server is planned. But as the users are, by design, very lazy and don't really care about this kind of things. It isn't an acceptable solution.
Does anyone know if there is a way for stopping Outlook to ask about credential when it loose temporarily the connection with Exchange ?
Thanks for reading

Hi,
Just checking in to see if the information from Ed (DareDevil57) was helpful. Please let us know if you would like further assistance.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Exchange 2010 Receive Connector intermittently getting an SMTP RSET from sending SMTP servers causing missing user email

Users are receiving about 95% of their messages from sending SMTP servers. Intermittently, sending SMTP servers send the Exchange 2010 Server a SMTP RSET command for no apparent reason. The RSET Command (by SMTP specification) causes the Exchange 2010 Server
to drop the message. The sending SMTP servers then do not resend the message after asking the Exchange server to drop the message. This means the message is marked as Sent by the sending servers but the dropped messages never show up in the users' Outlook
inbox.
Exchange 2010 Version 14.3 (Build 123.4)
Roles: Hub Transport, Client Access, Mailbox
What is going on?
Exchange Receive Connector log showing a RSET example:
2014-07-17T12:47:07.370Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,1,10.80.120.15:25,65.99.255.73:53479,*,SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders,Set Session Permissions
2014-07-17T12:47:07.370Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,2,10.80.120.15:25,65.99.255.73:53479,>,"220 vpn.a1expediting.com Microsoft ESMTP MAIL Service ready at Thu, 17 Jul 2014 08:47:06 -0400",
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,3,10.80.120.15:25,65.99.255.73:53479,<,EHLO inbound37.exchangedefender.com,
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,4,10.80.120.15:25,65.99.255.73:53479,>,250-vpn.a1expediting.com Hello [65.99.255.73],
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,5,10.80.120.15:25,65.99.255.73:53479,>,250-SIZE 52428800,
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,6,10.80.120.15:25,65.99.255.73:53479,>,250-PIPELINING,
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,7,10.80.120.15:25,65.99.255.73:53479,>,250-DSN,
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,8,10.80.120.15:25,65.99.255.73:53479,>,250-ENHANCEDSTATUSCODES,
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,9,10.80.120.15:25,65.99.255.73:53479,>,250-AUTH,
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,10,10.80.120.15:25,65.99.255.73:53479,>,250-8BITMIME,
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,11,10.80.120.15:25,65.99.255.73:53479,>,250-BINARYMIME,
2014-07-17T12:47:07.480Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,12,10.80.120.15:25,65.99.255.73:53479,>,250 CHUNKING,
2014-07-17T12:47:07.511Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,13,10.80.120.15:25,65.99.255.73:53479,<,MAIL FROM:<[email protected]> SIZE=165270,
2014-07-17T12:47:07.511Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,14,10.80.120.15:25,65.99.255.73:53479,*,08D16FD38F3D3355;2014-07-17T12:47:07.370Z;1,receiving message
2014-07-17T12:47:07.511Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,15,10.80.120.15:25,65.99.255.73:53479,>,250 2.1.0 Sender OK,
2014-07-17T12:47:07.558Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,16,10.80.120.15:25,65.99.255.73:53479,<,RCPT TO:<[email protected]> ORCPT=rfc822;[email protected],
2014-07-17T12:47:07.558Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,17,10.80.120.15:25,65.99.255.73:53479,>,250 2.1.5 Recipient OK,
2014-07-17T12:47:10.496Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,18,10.80.120.15:25,65.99.255.73:53479,<,RSET,
2014-07-17T12:47:10.496Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,19,10.80.120.15:25,65.99.255.73:53479,>,250 2.0.0 Resetting,
2014-07-17T12:47:10.559Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,20,10.80.120.15:25,65.99.255.73:53479,<,QUIT ,
2014-07-17T12:47:10.559Z,A1-S1\Windows SBS Internet Receive A1-S1,08D16FD38F3D3355,21,10.80.120.15:25,65.99.255.73:53479,>,221 2.0.0 Service closing transmission channel,
Daniel

Hi,
According to the receive connector log, your emails were failed to be deliverd with DNR. If I misudnerstand the meaning, please feel free to let me know. If yes, I'd like to confirm the detail information in the DNR to narrow down the
cause.
Additionally, based on my research, the RSET command performs an SMTP reset, and then aborts the message that is currently being sent. Thus, the log didn't provide more information for troubleshooting. Is there any other error in your event log? please check
the event log when the issue happens again.
Thanks,
Angela Shi
TechNet Community Support

8700 series - How to configure POP3 email accounts

I do not get the option to configure internet email. I just have the option to configure the email account with the BES Enterprise server. Please advise how do I get the option to configure gmail or yahoo account
Thanks

Hi and Welcome to the Forums!
If that is the only email option you have, then your account with your carrier does not contain what is needed to use their BlackBerry Internet Service -- that service, which they control, is what provides the bridge between your BB and internet facing email systems. Contact your carrier and ask them what you need to do with them in order to provide you the services you desire.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Exchange 2010 can't send or receive email with attachments.

Hello,
We have an Exchange 2010 server, running under Windows 2008R2. Both the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs.
The problem is that attachments over about 1 MB do not send or receive and no error message is returned. If I send an email message with a 3 MB attachment to myself, it reports as sent in Outlook. On the Exchange server the message queue shows nothing in
the queue. I try to use Exchange mail flow tracking tool and it hangs when selecting “messages received from” option. I gave up waiting after 5 minutes for the display to populate.
As the server is set attachments should be able to send and receive up to 20 MB.
I checked and verified all settings I could find related to this. I checked with the Exchange Management Console per the following article:
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
I also checked using the Exchange Power Shell using the following article:
http://eightwone.com/2010/09/29/exchange-message-size-limits/
Both show that all settings are suitable. Details are below
I would appreciate feedback on this problem.
Thank you!
Details from the articles noted above:
First test was to attach a 3 mb text file in Outlook sent from my in house account to my in house account. After 5 minutes the test message was not received nor was there an error message returned.
Checked The Exchange server mail queue and there was nothing in the queue. Checked the Exchange mail flow tracking tool and it hung when selecting “messages received from” option.
Reviewed and verified settings per the following 2 articles:
Article #1
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/managing-limits-exchange-server-2010-part1.html
Organization Configuration>Hub Transport>General Settings>Global Settings>Transport Settings set to max receive size (KB) = 20480
Settings set to max send size (KB) = 20480
Organization Configuration> Hub Transport> Send Connectors tab.
Maximum message size (KB) set to 20480
Exchange Management Console> Server Configuration> Hub Transport> and then on the right side, select the desired server.
A list of all Receive Connectors will be shown below
There are 3 receive Connectors
#1) named Client XXXXXXXXXX
Maximum message size (KB) set to 20480
#2) named Default XXXXXXXXXX
Maximum message size (KB) set to 20480
#3) named relay
Maximum message size (KB) set to 20480
Use Exchange Management Shell to check settings
#1) Get-ADSite
Returns:
Name                           HubSiteEnabled
Default-First-Site-Name        False
#2) Get-ADSiteLink
Name                      ADCost     ExchangeCost    Sites
DEFAULTIPSITELINK         100                        {xxxx.local/Configuration/Si...
#3) Get-ADSiteLink | select Max*
MaxMessageSize
unlimited
Exchange Management Console>Expand Organization Configuration>Click on Hub Transport item>Click on Transport Rules tab
No rules
Article #2
http://eightwone.com/2010/09/29/exchange-message-size-limits/
COMMAND: Get –TransportConfig
results:
ClearCategories                     : True
ConvertDisclaimerWrapperToEml       : False
DSNConversionMode                   : UseExchangeDSNs
ExternalDelayDsnEnabled             : True
ExternalDsnDefaultLanguage          :
ExternalDsnLanguageDetectionEnabled : True
ExternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
ExternalDsnReportingAuthority       :
ExternalDsnSendHtml                 : True
ExternalPostmasterAddress           :
GenerateCopyOfDSNFor                : {}
HygieneSuite                        : Standard
InternalDelayDsnEnabled             : True
InternalDsnDefaultLanguage          :
InternalDsnLanguageDetectionEnabled : True
InternalDsnMaxMessageAttachSize     : 10 MB (10,485,760 bytes)
InternalDsnReportingAuthority       :
InternalDsnSendHtml                 : True
InternalSMTPServers                 : {}
JournalingReportNdrTo               : <>
LegacyJournalingMigrationEnabled    : False
MaxDumpsterSizePerDatabase          : 18 MB (18,874,368 bytes)
MaxDumpsterTime                     : 7.00:00:00
MaxReceiveSize                      : 20 MB (20,971,520 bytes)
MaxRecipientEnvelopeLimit           : 500
MaxSendSize                         : 20 MB (20,971,520 bytes)
MigrationEnabled                    : False
OpenDomainRoutingEnabled            : False
Rfc2231EncodingEnabled              : False
ShadowHeartbeatRetryCount           : 12
ShadowHeartbeatTimeoutInterval      : 00:15:00
ShadowMessageAutoDiscardInterval    : 2.00:00:00
ShadowRedundancyEnabled             : True
SupervisionTags                     : {Reject, Allow}
TLSReceiveDomainSecureList          : {}
TLSSendDomainSecureList             : {}
VerifySecureSubmitEnabled           : False
VoicemailJournalingEnabled          : True
HeaderPromotionModeSetting          : NoCreate
Xexch50Enabled                      : True
COMMAND:
Set-TransportConfig –MaxReceiveSize 20MB –MaxSendSize 20MB
C:\Windows\system32>Set-TransportConfig -MaxReceiveSize 20MB -MaxSendSize 20MB
WARNING: The command completed successfully but no settings of 'Transport Settings' have been modified.
COMMAND:
Get-SendConnector
Identity                                AddressSpaces
Enabled
Internet                                {SMTP:*;1}
True
COMMAND:
Set-SendConnector -Identity Internet -MaxMessageSize 20MB
WARNING: The command completed successfully but no settings of 'Internet' have been modified.
COMMAND:
Get-ReceiveConnector
Identity                                Bindings                                Enabled
XXXXXXXXXX\Default XXXXXXXXXX           {0.0.0.0:25}
True
XXXXXXXXXX \Client XXXXXXXXXX     {:::587, 0.0.0.0:587}                   True
XXXXXXXXXX \relay                        {0.0.0.0:25}
True
COMMAND:
Get-ReceiveConnector | fl Identity,MaxMessageSize
Identity       : XXXXXXXXXX \Default XXXXXXXXXX
MaxMessageSize : 20 MB (20,971,520 bytes)
Identity       : XXXXXXXXXX \Client XXXXXXXXXX
MaxMessageSize : 20 MB (20,971,520 bytes)
Identity       : XXXXXXXXXX \relay
MaxMessageSize : 20 MB (20,971,520 bytes)
COMMAND:
Get-AdSiteLink | fl Name,*max*
Name           : DEFAULTIPSITELINK
MaxMessageSize : unlimited
COMMAND:
Get-RoutingGroupConnector <ConnectorID> | FL Name, *Max*
No routing group connectors are installed
Individual
Recipient Configuration > Mailbox>Properties of the User> Activate tab Mail Flow Settings> Properties>Message Size Restrictions settings:
Set to 20480 for send and receive for all.
Re-tested and had the same problem.
Post on Technet.

ExchangeITPro,
Thank you for your reply.
>what SP are you at?
As noted in the first paragraph: "We have an Exchange 2010 server, running under Windows 2008R2. Both
the server and Exchange are current for Windows and Exchange updates. Exchange is on SP3 installed about a month ago with no errors reported in the event logs."
>try restarting the transport services.
Done previously as well as the entire server. No change.

Exchange 2010 ACE30 Load Balancer Configuration

Afternoon Everybody,
Does anybody have any good documentation, or example configurations on how to load balance client traffic inbound to distrbuted Exchange 2010 Client Access Servers they could share please?
We have a basic configuration in place that is troblesome that is using sticky based persistence for all services, with basic health probes looking at ports 25, 80, 443 and RPC specific ports on 135, 6000, 60001. We are seeing major packet drops/loss as well as resets of the connections between the health probes and the servers that in turn take the servers out of the farm causing major downtime.
I would very much appreciate any pointers or guidance.
Thanks in advance.
Darrel

Hi Darrel,
Is there any specific requirement from the application side?
Can you go through the below links and see if they help you?
http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/App_Networking/hypervexchange.html
https://supportforums.cisco.com/thread/2123412
Regards,
Kanwal

Configuring Internet email, Hub transport, Client access (POP/IMAP) in Exchange 2010

Similar Messages

Maybe you are looking for