Configuring JDI help, started with WEBAS 630 sp3 now with WEBAS 640 sp 9

hi guys ,
   i was configuring  a JDI  with a recently installed server with WEBAS640 kit  i had not applied any patches to it .... after getting half way thru the configuration process when i was about to configure my name server in SLD  i say that there wasn't an option to create a new SLD inside the new technical system dropdown menu ..so after killing myself a couple of time to find out  what the hell the problem could be ..i saw it right in front of my eyes .... patches ..that's the ticket so i downloaded sp 9 and installed it ..
my question is since i deployed the JDI files with the old version   can i continue the configuration process or should i redeploy everything and start over again ?
thanks in advance to all you ubergeeks out there may your code be just and your pings be true
- Guy

thank you for all your help ,
i was applying the patches today but the deploy of the compontent tc.CBS.Appl failed i got the following error :
Nov 25, 2004 10:11:15... Error: Aborted: development component 'tc.CBS.Appl'/'sap.com'/'SAP AG'/'6.4009.00.0000.20041021205319.0000':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/tc.CBS.Appl..
Reason: Exception during generation of components of application sap.com/tc.CBS.Appl in container EJBContainer.; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application sap.com/tc.CBS.Appl in container EJBContainer.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
i was wondering if you could point me in the rigth direction to solve this .
thank you very much

Similar Messages

  • I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

    I am on Acrobat DC trial. On earlier versions have no problem with duplex printing. Now with DC, it's impossible. I have tried downloading latest printer software, etc, etc. Nothing seems to0 work. Any ideas please?

    Ralph, Thanks for replying. There where no received SIP messages at all just the INVITE being sent but I have made some more progress. The mini does indeed just work. I can do everything that you are supposed to do to other ichat users on the internet. Very nice.
    The imac is still playing up but I have got further. I had peerguardian2 installed which unknown to me doesn't need to be running to prevent you for accessing 'barred' IP addresses. snatmap.mac.com is barred in the lists! I discovered this when I saw one of your other posts showed how to turn on terminal logging for ichat. Now that I have turned off peerguardian2 (using the disable filters option) I can make calls to the testbot and see the adverts. I have even done a video conference with the two testbots. I will just uninstall peerguardian2.
    However, I can not get a AV chat working to a real user....
    In response to your suggestions:-
    I have tried all the options for quicktime streaming but will try 1.5Mb/s again.
    The ichat bandwidth limit is set to "none". I am in New Zealand and I have standard ADSL (not ADSL2+) 7.6M down 512K up. The mini config is also set to none.
    Internet sharing is off.
    I have had parallels on the machine but the two interfaces that it installed "Parallels Host-Guest" and "Parallels NAT" are configured 'off' and show as not connected. Is this enough? I will uninstall parallels and see if that helps since I don't use it. I also have VMware's thing installed but that doesn't seem to add any interfaces.
    I need to capture a full trace of the imac to other ichat user to see what is happening but will update when I have does your suggested changes or have a trace
    Thanks again

  • Tried to run a CD I had run with Snow Leopard. Now (with Lion) getting a message that PowerPC applications are no longer supported.. How do I overcome this? Thanks

    Tried to run a CD I had run with Snow Leopard. Now (with Lion) getting a message that PowerPC applications are no longer supported.. How do I overcome this? Thanks

    Well Lion does not support power PC applications.  They only way is to upgrade the application, or if your have SL disks, reinstall SL.

  • Need help! New internet service and now some web sites won't load

    I just switched from Comcast cable internet to qwest DSL. I use Safari for my browser and my wife uses Firefox. I cannot get past the login portion of these sites:
    flickr.com (or any yahoo-related site)
    usbank.com
    apple.com discussion forums (I'm on my PC-based laptop posting this)
    Being that all of my PC-based laptops can access these sites just fine, I know it has something to do with the Mac.
    First, I've emptied and cleared all my caches, deleted all cookies, reset both browsers, restarted my computer about 10 times and still cannot get past the login portion of the sites listed. I can get to the first page, but then when I go to login, it freezes up.
    Had this problem with facebook at first too, but after doing what I talked about above (resetting everything), I was able to log into facebook.
    Any suggestions? I'm at my wits end.
    Just as an FYI, I had no problems accessing these sites with my cable internet modem.
    Oh, I'm also using Safari 5.0.3 and firefox 3.6.13 (have the same problem with both of these browsers on my mac).

    Hi,
    Try repairing permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. As long as you see, "Permissions Repair Complete" when it's finished... you're done.
    If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US

    Restart your Mac. If that didn't help, go to Safari / Preferences - Autofill. Make sure *User names and passwords* is selected. Now open Keychain Access. (Applications/Utilities). Select Passwords on the left. Delete all keychains related to the sites you have problems logging in.
    Relaunch Safari and try those sites. You should be prompted to save the login data to a new keychain. If that didn't help, login to another user account. Launch Safari. If you see the same problems there, then log back into your admin account, launch Disk Utility. Select MacintosHD in the panel on the left then select the FirstAid tab.
    If Disk Utility reports, you will have to boot from your install disc to make repairs, instructions here.
    Using Disk Utility to verify or repair disks
    Carolyn
    Message was edited by: Carolyn Samit

  • Can anyone tell me how to fix the problem with downloading music? Now with the new iOS5

    Ever since the new iOS5, and now 5.1, whenever I download music, and play it on my iPad2, the album cover will "flash" white between each song, whereas before the picture would hold steady for the duration of the album play! I have to admit I find this REALLY annoying! Even syncing with my MacBook doesn't fix the problem...any ideas?

    Hi Jane,
    First, regarding the virus issue, although I cannot promote any specific 3rd party software, there are plenty of FREE and very good anti-virus apps out there. You can Google 'free antivirus" and a good list will come up. You may want to look at a few reviews before you try. I don't know if you use Mac or Windows so you may have to do a little research on which is best for your computer platform. You can run the software and it will help clean off your system if there's a virus.
    Second, regarding your Elements sync to Revel, you may need to disable and then re-enable the Revel sync agent from within Elements, which you find in Preferences. In addition you may try signing out and then back into Revel via Elements.
    Let me know how that goes. If the disable/re-enable doesn't help, I'll get an Elements team member to see if they can help.
    Best of luck on the virus software!
    Glenyse

  • Problem with previously running code - now with dmtxtsvmdemo

    I had been working through a proof-of-concept that mysteriously stopped working. I'm sure it is something I did but haven't been able to figure out what that is yet.
    During diagnostics, I now see that the code I based my own code on is no longer working - dmtxtsvmdemo.
    I have not changed dmtxtsvmdemo and have just refreshed it to be sure. The stack trace is below.
    There are no invalid schema objects related to DMSYS or DMUSER1.
    Thoughts?
    java -classpath $CP com.vacuity.prediction.dmtxtsvmdemo hostname:1521:orcl dmuser1 password
    txtsvmPrepareTextB_jdm is started, please wait. txtsvmPrepareTextB_jdm is successful.
    java.lang.ArrayIndexOutOfBoundsException: 7
    at oracle.dmt.jdm.task.OraTransformationTaskImpl.mapJobArgs(OraTransformationTaskImpl.java:176)
    at oracle.dmt.jdm.base.OraTask.retrieveObjectFromDatabase(OraTask.java:535)
    at oracle.dmt.jdm.base.OraTask.removeTaskContents(OraTask.java:229)
    at oracle.dmt.jdm.base.OraTask.removeObjectFromDatabase(OraTask.java:214)
    at oracle.dmt.jdm.resource.OraPersistanceManagerImpl.removeObject(OraPersistanceManagerImpl.java:297)
    at oracle.dmt.jdm.resource.OraConnection.removeObject(OraConnection.java:389)
    at oracle.dmt.jdm.OraMiningObject.saveObjectInDatabase(OraMiningObject.java:150)
    at oracle.dmt.jdm.resource.OraPersistanceManagerImpl.saveObject(OraPersistanceManagerImpl.java:245)
    at oracle.dmt.jdm.resource.OraConnection.saveObject(OraConnection.java:383)
    at com.vacuity.prediction.dmtxtsvmdemo.executeTask(dmtxtsvmdemo.java:480)
    at com.vacuity.prediction.dmtxtsvmdemo.prepareData(dmtxtsvmdemo.java:329)
    at com.vacuity.prediction.dmtxtsvmdemo.main(dmtxtsvmdemo.java:177)

    I reran all the other samples and most worked as expected with the exceptions of DMSVCDEMO and DMEXPIMPDEMO. I'm hoping the stack traces are useful in diagnosing my problem.
    ========================================
    DMEXPIMPDEMO     Fails
    iePrepareBuildTask_jdm is started, please wait. iePrepareBuildTask_jdm is successful.
    nbExpImpBuildTask_jdm is started, please wait. nbExpImpBuildTask_jdm is successful.
    nbExportTask_jdm is started, please wait. nbExportTask_jdm is failed.
    Failure Description: ORA-40222: data mining model export failed, job name=ORA-40222: data mining model export failed, job name=DMUSER1_exp_101, error=ORA-39001: invalid argument value
    ORA-06512: at "DMSYS.DBMS_DATA_MINING", line 5196
    ORA-06512: at line 1
    , error=
    nbImportTask_jdm is started, please wait. nbImportTask_jdm is failed.
    Failure Description: ORA-40223: data mining model import failed, job name=ORA-40223: data mining model import failed, job name=DMUSER1_imp_102, error=ORA-39001: invalid argument value
    ORA-06512: at "DMSYS.DBMS_DATA_MINING", line 5287
    ORA-06512: at line 1
    , error=
    ========================================
    DMSVCDEMO     Fails
    svmcClipBuildTask_jdm is started, please wait. svmcClipBuildTask_jdm is successful.
    svmcNormBuildTask_jdm is started, please wait. svmcNormBuildTask_jdm is successful.
    svmcPrepareBuildTask_jdm is started, please wait. svmcPrepareBuildTask_jdm is successful.
    svmcPrepareTestTask_jdm is started, please wait. svmcPrepareTestTask_jdm is successful.
    svmcPrepareApplyTask_jdm is started, please wait. svmcPrepareApplyTask_jdm is successful.
    --- Build Model - using prior probabilities ---
    svmcBuildTask_jdm is started, please wait. svmcBuildTask_jdm is successful.
    BuildSettings Details from the svmcBuildSettings_jdm table:
    Table : svmcBuildSettings_jdm
    SETTING_NAME SETTING_VALUE
    ALGO_NAME ALGO_SUPPORT_VECTOR_MACHINES
    CLAS_PRIORS_TABLE_NAME SVMCBUILDSETTINGS_JDM_PR
    JDMS_FUNCTION_TYPE CLASSIFICATION
    JDMS_TARGET_NAME AFFINITY_CARD
    SVMS_CONV_TOLERANCE 0.0010
    SVMS_KERNEL_FUNCTION SVMS_LINEAR
    BuildSettings Details from the svmcBuildSettings_jdm model build settings object:
    Target attribute name = AFFINITY_CARD
    Algorithm Name: svmClassification
    Function Name: classification
    Priors Map: {0=0.35, 1=0.65}
    Kernel Function: kLinear
    Complexity Factor: 0.2442
    Tolerance: 0.001
    Is Active Learning enabled? true
    Model Name: SVMCMODEL_JDM
    Model Signature: ( Attribute Name, Attribute Type )
    ( AGE, doubleType )
    ( BOOKKEEPING_APPLICATION, doubleType )
    ( BULK_PACK_DISKETTES, doubleType )
    ( COUNTRY_NAME, stringType )
    ( CUST_GENDER, stringType )
    ( CUST_INCOME_LEVEL, stringType )
    ( CUST_MARITAL_STATUS, stringType )
    ( EDUCATION, stringType )
    ( FLAT_PANEL_MONITOR, doubleType )
    ( HOME_THEATER_PACKAGE, doubleType )
    ( HOUSEHOLD_SIZE, stringType )
    ( OCCUPATION, stringType )
    ( OS_DOC_SET_KANJI, doubleType )
    ( PRINTER_SUPPLIES, doubleType )
    ( YRS_RESIDENCE, doubleType )
    ( Y_BOX_GAMES, doubleType )
    Is linear model? true
    Model Deatils: ( Target Value, Attribute Name, Attribute Value, Coefficient)
    javax.datamining.EntryNotFoundException: The entry bias does not exist in the model details.
         at oracle.dmt.jdm.resource.OraExceptionHandler.createException(OraExceptionHandler.java:119)
         at oracle.dmt.jdm.resource.OraExceptionHandler.createException(OraExceptionHandler.java:91)
         at oracle.dmt.jdm.OraDMObject.createException(OraDMObject.java:111)
         at oracle.dmt.jdm.modeldetail.svm.OraSVMClassificationModelDetail.getBias(OraSVMClassificationModelDetail.java:542)
         at com.vacuity.prediction.dmsvcdemo.displaySVMCModelDetails(dmsvcdemo.java:996)
         at com.vacuity.prediction.dmsvcdemo.buildModel(dmsvcdemo.java:748)
         at com.vacuity.prediction.dmsvcdemo.main(dmsvcdemo.java:242)
    ========================================

  • My ipad 2 ran great on with IOS 7. Now with IOS 8 it is slow and choppy and full of error messages. Is this Apples way of forcing my IPad2 into obsolesence?

    IOS 8 degrades iPad2 performance.

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    No data is lost due to a reset.

  • How to Install, Configure and getting started with Hyperion Web Analyzer9

    i have installed both
    Hyperion Reporting and Analysis - System 9 Services Release 9.3.1 Microsoft Windows x86 Installer.
    Hyperion Reporting and Analysis - System 9 UI Services Release 9.3.1 Microsoft Windows x86 Installer
    Now tell me step by step on how to configure and how start Web analyzer
    I dont know how to start server/services. (Any Web server required?)
    Getting started would be more helpful.
    Need help ASAP.
    thanks,
    Ram

    Hi,
    First of all have you installed Shared Services as you will need that as that foundation of the installation.
    You will also need to install other components such as essbase if you intend to use it with web analysis.
    If you have done that, then you will first need a repository to hold Reporting and Analysis information.
    Afte start up the configuration utility and select the Reporting & analysis elements and go through the steps entering
    details such as shared services connection, repository information.
    It should install the components as a service.
    You should really read the installation document :- http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hs_windows_install.pdf
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • JDBC Configuration Error -- Please Help!!!!! any SAP WebAS folks

    Hi,
      Being a newbie to SAP WebAs i'm seeking some help from this forum for the issue which's driving me crazy. I'm trying to configure a Oracle data source to access a local oracle database on a WebAs server hosted part of EP6.
    The WebAs is 6.4 w/ kernal 6.3(this thing is confusing me..), whenever i configure a datasource(after adding driver), it's bombs with a error message on the J2EE console.. I tried many times before trying to find help outside(like this group)
    I have spent many years developing J2EE apps using various vendor products including WebAS6.0, this thing is crazy.. help please..
    V
    the error is pasted below
    java.rmi.RemoteException: Error occurred while starting application in whole cluster and wait.; nested exception is:
    com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Complex error : server ID 3811650:
    Cannot start DataSource "CUSTOMERTRANSACTIONREF".
    at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:678)
    at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:660)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:562)
    at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.deploy(DataSourceManagerImpl.java:261)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
    at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
    at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
    at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
    at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:400)
    at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
    at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
    at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
    at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:157)
    at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:220)
    at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:803)
    at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
    at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
    at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:292)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
    at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:118)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)

    Hi,
    I'm not sure what the problem is, but I can give you some basic suggestions about what you could do.
    First of all, check if there are more detailed error messages available in the defaultTrace.trc file. You can open the file using LogViewer service in Visual Administrator.
    Also, check the settings for Database URL, and make sure you have set the SQL Engine option in the Additional tab to "Native SQL".
    Best regards,
    Zornitsa

  • Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

    Help.I uninstalled ios8 using the directions on the web site and now all my apps,mail are gone.I backed up to iTunes first but when I try to sync to get everything back,it starts and then says it has failed.What do I do now.Thanks.Jane

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • Help!!! (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)

    Post Author: mrmc
    CA Forum: General
    Hi all,
    Recently, I got problem on using cystal report on asp.net web. the error msg is:
    Parser Error Message: The base class includes the field 'viewer', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer).
    in the code:
    <%@ Register TagPrefix="ce" Namespace="CrystalDecisions.Enterprise.WebControls" Assembly="CrystalDecisions.Enterprise.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" %>
    <CR:CrystalReportViewer id="viewer" runat="server" AutoDataBind="true" HasCrystalLogo="False" Width="350px"          Height="50px" HasToggleGroupTreeButton="False" DisplayGroupTree="False" HasGotoPageButton="False" HasRefreshButton="True"          DisplayToolbar="False"></CR:CrystalReportViewer>
    In web.config
    <add assembly="CrystalDecisions.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=1234567890"/>
    the server contains crytal report 9 (come from .net studio) and crytal report 11 (installed standalone). 
    I googled this problem, it seems a lot of people got this problem but no solution...
    could anyone help me?  Thanks!

    Post Author: david.wilkes
    CA Forum: General
    You might try Removing the Reference and re-adding the reference. That seemed to get me pass this error, but I ran into another error that I have not figured out yet.

  • Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with  6.0.1(10A523)version. Please help how to solve this problem.

    Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with  6.0.1(10A523)version. Please help how to solve this problem. Thanks.

    Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
    Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

  • I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

    I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

    What does the error message say? (Precise text, please.)

  • My mac starts up in a white screen with a loading bar and a loading circle please help

    My mac starts up in a white screen with a loading bar and a loading circle please help

    I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed:  OS X: About OS X Recovery - Apple Support

  • [SOLVED]How to configure pptp vpn start on boot with netcfg?

    I've configured 2 profiles:
    eth0 and ppp0, where ppp0 is a pptp vpn tunnel.
    $ ls /etc/network.d/
    eth0  examples  interfaces  ppp0
    $ cat /etc/network.d/ppp0
    CONNECTION='ppp'
    INTERFACE='ppp0'
    PEER='dxt'
    PPP_TIMEOUT=10
    $ cat /etc/conf.d/netcfg
    # Enable these netcfg profiles at boot time.
    #   - prefix an entry with a '@' to background its startup
    #   - set to 'last' to restore the profiles running at the last shutdown
    #   - set to 'menu' to present a menu (requires the dialog package)
    # Network profiles are found in /etc/network.d
    NETWORKS=(eth0 ppp0)
    # Specify the name of your wired interface for net-auto-wired
    WIRED_INTERFACE="eth0"
    # Specify the name of your wireless interface for net-auto-wireless
    WIRELESS_INTERFACE="wlan0"
    Manually, I can start up ppp0 correctly.
    $ sudo netcfg -u ppp0
    :: ppp0 up                                                                                                                                                                 [ BUSY ] Using interface ppp0
    Connect: ppp0 <--> /dev/pts/3
    CHAP authentication succeeded
    MPPE 128-bit stateless compression enabled
    Cannot determine ethernet address for proxy ARP
    local  IP address 10.100.3.132
    remote IP address 10.100.3.1
                                                                                                                                                                               [ DONE ]
    $ ip addr list dev ppp0
    8: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1496 qdisc pfifo_fast state UNKNOWN qlen 3
        link/ppp
        inet 10.100.3.132 peer 10.100.3.1/32 scope global ppp0
    But after booting, only eth0 is up. How to configure ppp0 to start on boot with netcfg?
    Last edited by rchiang (2012-12-21 01:09:32)

    Thanks a lot for your instruction.
    netcfg works now!
    chris_l wrote:
    Did you
    systemctl enable [email protected]

Maybe you are looking for

  • SmartView 11.1.1.2 Data Source Connection Manager is Disabled.

    I recently did a fresh install of Oracle Hyperion EPM 11.1.1.2 in a Windows 2003 Enterprise Server (64-bit) environment. I'm now having problems running Smart View in this environment. When I attempt to connect to a cube, from within Excel, the Data

  • How does one remove a macbook from an iCloud account?

    I want to remove an older macbook from an I cloud account.

  • Quicktime Pro Has Failed To Launch - PLEASE HELP

    I spent $31 and purchased Quicktime Pro so that I could put together a video with music of my time here in Beijing. However, I can't even seem to get Quicktime Pro to launch. Am I missing something here? I entered in the code on my Quicktime control

  • Add user-command in MM60 report

    HI, when I click on Material in MM60 report out put it should go the MM03 transaction . But it is not happening. please check the below code and help me . I am doing thid through Implict Enhancment . FORM cs_callback-user_command  USING P_UCOMM     L

  • In-house banking

    i have to work on in-house banking.can anybody help me by providing    material.