Configuring layout and driver program

Hi everyone
i want to know onething. in cheque printing i have a layout changed according to the requirement. now in the fbzp t-code where we configure the form and program i gave the form name and medium for this the standard program "RFFOUS_C".
its giving errors now... i want to know in place of RFFOUS_C whether i should assign the printprogram to rectify the errors?
points will ve given its urgent

Hello.
If after creating a new cheque script you want to insert a new driver program, do the following:
1 - Go to SE16, choose view V_T042E and press ENTER.
2 - Press position button in the bottom, write your company code in field Paying co. code in POP-UP and press enter.
3 - It will jump to your company line and then click twice in your company code.
4 - Press button display Pymnt meth. in ctry on the top right of the screen
5 - In the bottom, you'll see the payment medium program.
Regards,
Valter Oliveira.

Similar Messages

  • Credit and debit memo sapscript prog and driver program

    Hi all, i need debit and credit memo sap-script forms and their drivers???? please help
    thanks.

    Hello Amit,
    The form for debit/credit memo is: F140_DOCU_EXC_01
    Driver program is: RFKORD11..
    Thanks,
    Dishant

  • F110 - output using Form and Driver program

    Hi All,
    I need to prepare Sap Script Form for F110 tcode.
    standard scriptname to be use is F110_IN_AVIS
    standard driver program to be use is RFFOAVIS_FPAYM.
    but i dont know, where to assign these to F110 and check the output weather Form is displaying the data in correct way or not.
    Thanks for you help.
    Srinivas

    Hi Jayasri,
    Thanks for your reply, if i mentioned wrong, could you please tell me what should i mention for "Payment Advisor to Vendors".
    After mentioned the form name in FBZP. How to check the output on Form using F110. Because, to execute it, when I hit "Printout", am getting jobname. With that jobname, if i go to sm37, i am getting the status has "Finished". So can't i see the output.
    If i see the output, then only i can do the need full changes to my client requirement.
    Could you please help me on this.
    Thanks for your reply.
    Satya Srinivas

  • Reg : SMARTFORM name and DRIVER PROGRAM

    Dear Gurus,
    Can anybody help me out in providing standard SMARTFORM name and also driver Program for
    'ANNUAL MAINTENANCE CONTRACT CONFIRMATION' in CS(Customer Service) module.
    Cheers,
    Loverboy K

    Hi,
    there is on a standard system no smartform for you. So you have to do your thing with the standard sapscript.
    However there have been some BestPractices projects at SAP. There they have a lot of standard smartforms. Maybe you can download them from SAP somewhere the name will something
    with MMCON or MMDLS in it.
    you have to find out yourself because i do not have it here to send it to you.
    Gr., Frank

  • Assignment form and driver program

    In which t-code do we assign service order form and its respective print program. its not there in NACE.
    The standard t-code that prints this form is IW32
    please help
    Edited by: Progirl Progirl on Jun 5, 2009 4:39 PM

    Hi,
    Here is the way
    Go to SPRO ->  Plant Maintainance and Customer Service -> Maintainance and Service Processing - >Maintainance and Service Orders - > Print Control -> Define Shop Papers, Forms and Output programs ->Click on Define shop papers .
    Here you check shop paper for Service order and attach form & Program.

  • GR's Smartform and  Driver program

    Hi,
    Can anybody tell me the standard smartform and driverprogram for GR.
    Thanks in advance.
    Sastry

    hi,
    Smart from Name :  /SMB40/MMGR1_A
    Thanks,
    Anitha

  • Driver program Configurations for CO03/CO02

    Hi All,
    Requirement:
    We are configure script and driver program in OPK8 With list type LP01.
    Issue:
    This driver program is not triggered CO03/CO02 transaction level For this we need configure any other transaction.
    Can you suggest me how to resolve this issue.
    Thanks in Advance,
    Rajeshbabuv.

    Hi,
       Check whether you have maintained an entry of the smartform in NACE, and removed any sapscript assigned under FORM in NACE.
    Place a break point in Program RSNAST00 at line number 799, and check the values of TNAPR workarea, see what the Driver program and smartform name
    TNAPR-PGNAM = ?
    TNAPR-SFORM = ?
    Regards
    Bala Krishna
    Edited by: Bala Krishna on Aug 6, 2010 3:12 PM

  • Driver programs and print programs

    please give the imp print programs and driver programs of these print  programs?

    Driver programs varies, you can use standard ones or customise it.
    For Example, Some Driver programs related to FI, start with RF*
    Goto SE38 ,RF* press F4 , read the description.
    Select documentation of desired driver program and you can see the corresponding form name to it and use of the program.
    Reward points if useful.
    Regards,
    SaiRam

  • Standard driver programs,output type ,scripts,smartforms for SD reports

    hi experts,
                  Can any one list all the standard driver programs,output types ,scripts,smartforms for SD reports.
    mani

    Hi,
    Check this out
    NACE
    You can track the form and the print program used for that form
    The Tcode NACE is used to link the Standard SAP forms (SCRIPTFORM or SMARTFORM) or the customized form or the new form to its respective print programs. Also the output types, Form entry are linked with their forms and print programs. In short term, i can tell u that configuration or customization of forms to print programs, assigning output types, form entry to the forms are done using this Tcode.
    NACE is used to create output type while creating the output type you will mention forms, and driver program.
    that will be maintained in the table TNAPR.if you create the output type using NACE then it will be automatically visible in table NAST and TNAPR.
    so check in NAST, TNAPR table
    http://help.sap.com/saphelp_erp2005/helpdata/en/c8/1989fe43b111d1896f0000e8322d00/frameset.htm
    Condition records in NACE?
    and
    NACE is used for message control customizing.
    Take a look at the following link
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
    and also
    NACE is used for message control customizing.
    Take a look at the following link
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/198a1843b111d1896f0000e8322d00/frameset.htm
    If it helps reward with points..

  • Calling a driver program by submit in user exit for PGI

    Hi Gurus,
    I have a question regarding post goods issue (PGI) for transaction vl01n,vl02n and vl06g.
    earlier i have created a smartofrm and a driver program for sending the form output attachment in a mail after delivery posting manually.
    for this i have created a smartform and driver program in which all the logic to attach and mail send is written on delivery posting.
    but now customer want this fucntionality on Post goods issue (PGI), when user go to trasaction vl01n ,vl02n and vlo6g and pressing PGI button,
    then mail should be sent automatically with for output attachment.
    i have found a user exit which is being triggerd on PGI press MV50AFZ1 in which implemented the implecit enhancement in perform
    user_exit_save_document_prepeare with below code.
    ENHANCEMENT 1  ZPGI_MAIL_SEND.    "active version
    DATA c_zlf TYPE likp-lfart.
    IF sy-ucomm = 'WABU_T' and xlikp-lfart = c_zlf.
    SUBMIT ZSD_DECLARATION_CONFORMITY AND RETURN.
    ENDIF.
    ENDENHANCEMENT.
    After going to transaction vl02n i am putting unposted delivery number and clicking on PGI button.
    in debugging its going to condition check for ucomm for PGI buttion and delivery type.
    if condtion is fullfiled and curser going further on submit statement, but without executing the driver program ZSD_DECLARATION_CONFORMITY it coming out of enhancement.
    its not performing the task which is develped in the driver program.
    Please help me with the submit statement structure if i am missing any or other solution for my problem.
    Br,
    Surya

    Hi Team,
    I have used the perform.
    ENHANCEMENT 1  ZPGI_MAIL_SEND.    "active version
    DATA c_zlf TYPE likp-lfart.
    IF sy-ucomm = 'WABU_T' and xlikp-lfart = c_zlf.
    Perform entry( ZSD_DECLARATION_CONFORMITY )using return screen.
    ENDIF.
    ENDENHANCEMENT.
    Now i am able to communicate with my program.
    Thanks,
    surya

  • RE: what is the standard driver program for printing PO form in ECC 6.0EHP5

    Hi Guys,
                 For printing Purchase order smartform in MM module , earlier i used SMBA0 package i.e /SMBA0/AA_FM06P Driver program in Ecc 6.0 Ehp4 . But now my client is using Ehp5 ,here we could n't find SMBA0 package . So, can any one suggest me what is the relavant package for SMBA0 in Ecc  6.0 EHP5.
    Thanks in advance.
    Regards,
    Bala.

    Hi Bala,
    Those are available in client 000, you have to copy these Smartforms and driver programs from client 000.
    Client 000
    Original program: /SMBA0/AA_FM06P
    Original Form:      /SMBA0/IN_MMPO
    Regards,
    Surya

  • Calling Smart Form using Driver Program

    Hi, I'm a new ABAP developer. I've recently been studied about Smart Forms and I didn't understand what are the benefits to call a smart form using driver program.
    Could anyone help me, please?

    Bruno, it works like this.
    Lets says you attach a Z output to a sales order which sends the details of the SO to the customer in a PDF format. For this purpose you have developer the o/p using smartforms or scripts. Now there are few configs that you will perform in order to send the PDF to the customer AUTOMATICALLY once the SO is saved. This is done thru the transaction NACE where you will attach the smartform, the o/p, partner function and driver program.
    This driver program will get kicked in when the order is saved and will perform the logic and then call the smartform.
    Hope this give a little bit better picture.
    Vikram.M

  • Standard Driver Program for Sales Order Confirmation

    Hi,
    My requirement is to develop smartforms and driver program for Sales Order Confirmation.
    For doing this, I found there is a standard smartforms R2RBL_SDORC_L for Sales Order Confirmation. So I thought I can take a Z copy of this smartform and modify it to my requirement. So that we can use the Import parameters (Form Interface parameters) of the form R2RBL_SDORC_L. This will also reduce the work of writing the code in Driver program.
    Now, I need to know what is the standard driver program for this form R2RBL_SDORC_L. If I can find the program name, I can take a Z copy of that and enhance it to my requirement.
    Ultimately I believe I can reduce the work of writing code to fetch all Sales order details.
    Can anyone let me know the standard driver program name for the form R2RBL_SDORC_L?

    Can anyone share how you approached in developing smartforms and driver program for Sales order confirmation?
    Note: This program and smartforms will be assigned in the NACE transaction.

  • Smartforms driver program output  query

    Hello friends,
    I created sales invoice smartforms. For that i created one driver program in se38. But while i am executing driver program i am just getting program output. Both my smartforms design and driver program is activated. Someone please give me guidance to solve this problem.
    Thanx & Regards,
    Rahul Talele

    Have you written this function module to specify the smartform name and execute the Smartform Function Module..
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          FORMNAME = 'ZPP_PACKMATL_REQ' " smartform name
        IMPORTING
          FM_NAME  = W_FORM_FUNCTION.
    CALL FUNCTION W_FORM_FUNCTION
      EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         =
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
      TABLES
        ITAB_DATA                  = ITAB_DATA
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " display_form

  • Purchase order driver program and configuration for nace

    i have copied the medruck in script and i need to write the driver program for that and need to configure to nace can any one tell me how to do this.

    Hi Rocky,
    Below are steps to configure:
    1. Go to transaction NACE
    2. Select EF application, click on output types
    3. Select Output type NEU and double click on processing routines
    4. Here you can give ur driver program name and script name
    Hope it will solve the problem.
    Regards
    Krishnendu

Maybe you are looking for