Configuring Mail on iPad, "POP server is not responding"

Just bought my ipad last week and ive been trying to configure my email account (Live), but it just doesn't seem to work.
I select 'other' and follow the steps, but then a pop up appears saying "Cannot Connect Using SSL" --> Do you want to setup without SSL, yes/no? Selecting no, cancels the setup and selecting yes brings up another pop up, "POP server 'pop3.live.com' is not responding. Check your network connection and that your entered information is correct in the ;Incoming Mail Server; field.
If i click ok after that 2nd popup, i can save my settings but the password is blank and when i re-enter the password the same pop up appears.
Thank you for help in advance.

It works fine and then after the final step i click save... then it brings me to mail and it says Password Incorrect, Enter the password for the exchange account 'Live".. but i'm positive ive entered the password right, ive entered it so many times.
not sure if this is relevant, but it works perfectly on my iphone?

Similar Messages

  • Cannot get mail says my pop server is not responding

    new i phone...cannot get mail says my pop server is not responding...help

    It works fine and then after the final step i click save... then it brings me to mail and it says Password Incorrect, Enter the password for the exchange account 'Live".. but i'm positive ive entered the password right, ive entered it so many times.
    not sure if this is relevant, but it works perfectly on my iphone?

  • Mail connects to POP server but not displaying email

    my mail has worked for months setup to our server with a POP email account, as of two days ago mail stopped displaying new emails. Mail and the mac is connected to the server, i have also run the connection doctor and its says it is connected to the server.
    I have deleted the account and re-set it up now it wont even draw down any of the old emails on the server let alone new emails.
    mac osx 10.6.7 and mail 4.5 on mac book pro i7 15"
    Anyone else had this?? Any advice?? thanks

    I'm shocked nobody has come in with any help here, so, not sure about this but here's what has helped as lot in 10.4's Mail...
    T
    his can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup

  • Mail sender adapter POP server not configured for URL access

    Hi Experts,
    I have a Mail --> PI --> R/3 scenario and I am configuring the Mail sender adapter for POP3. The issue is that the POP server is not configured to be accessed via a URL and hence the URL pop://hostname/ is causing the following error at runtime:
    _1. When I use pop://Fully qualified host name/
    _Error: exception caught during processing mail message; java.net.UnknownHostException
    _2. When I use pop://IP address of host/
    _Error: exception caught during processing mail message; java.net.SocketException: Connection timed out:could be due to invalid address
    I am able to ping the POP3 server from the PI server using both the FQDN and IP address.
    Can someone please help.
    Thanks,
    Shobhit
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM

    Hi Shobhit
    Check with these notes:
    804102
    xi 3.0 mail adapter with pop3 user authentication problem
    810238
    XI 3.0 Mail Adapter for POP3 may not report some errors
    also check mailserver security settings ...
    Connection refused occures when XI cannot connect
    in most cases so try checking it again , maybe some ports are not opend on the firewall
    Thanks
    Edited by: Abhishek Agrahari on Jul 14, 2009 11:44 AM

  • The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

    I got this problem when I tried to configure out-going email and add an account to farm administrator group.
    I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
    Here are the screen shots.
    The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
    Anyone can help me about it? Thanks.
    Here is the log.
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    8gsf
    High    
    #160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
    characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         General                      
    8kh7 High    
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         E-Mail                        
    7946 Critical
    Cannot complete this action.  Please try again.
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)                      
    0x1138
    SharePoint Foundation         Runtime                      
    tkau Unexpected
    Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
    server administrator.    at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message)     at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
        at System.Web.UI.WebControls.Button.OnClick(EventArgs e)     at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
    eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
    df98555c-612f-4a58-9443-ab6e9a4fcc53
    The e-mail address I have tested it for several times and there is no problem.
    Anyone has any clue about this error?

    Hi.
    This I have seen before...
    It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
    It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
    It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
    If, its the builtin SMTP service you are using, check this link:
    http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
    Check that and try again.
    Regards
    Thomas Balkeståhl - Technical Specialist - SharePoint -
    http://blog.blksthl.com
    Download the SharePoint Branding Project here
    Download the SharePoint 2010 Site Settings Explained here

  • How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

    How to configure Mail app on mountain lion to not download all my emails in hotmail server. I need only just 1-2 weeks

    Try going to the web based site and see if you can set up a temporary folder there. Move anything you don't want to download to that folder.

  • I am not receiving new emails on my phone.  I am receiving a pop-up that reads "cannot get mail" saying my server is not responding and to check my settings.  My settings are correct. Help!

    Looking for help.... I keep getting a pop-up message on my phone stating that my server is not responding and to check my settings.  My settings are fine.  Any advice on what I can do to receive new emails on my phone?  Help!

    For a few weeks I have been using the GMail app on my iPhone 4S to get mail without problem.  When I wanted to check something in Apple's Mail app, which has worked well for years, I now get a message for my principal email address that the server is "not responding," even though the same server is responding to my GMail app.  For some reason, when I dismissed the message in Mail, it popped up again, but then could be dismissed.  Did something change in Mail that requires some imap addresses be deleted and readded?  Any idea?
    I would not want to think that Mail is programmed to befuddle if it is ignored too long.

  • Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding [and I'm at my wit's end!]

    I originally posted this question to the community section and was advised to post it here.  Please bear with me as this will be a long post.  I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
    taken and the results of several diagnostic tools and logs.
    I have a Sony VAIOS VPCEBB33FM lap top since 2011.  I have had this issue on an off for a long time.  I'm at my wit's end.  Any new insights or suggestions would be greatly appreciated.
    Scenario Details
    1)  Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
    2)  I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
    3)  Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
    4) Once in a while,  the built-in wireless adapter is not found and I have to reinstall the driver.  Also the diagnostic tool has had to reset my adapter on an increasing basis.
    5)  I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop.  Even though I've been online on an infrequent basis it worked just fine for a while. Now that
    I've been online a bit more I'm having the same issues again.
    Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
     1) Restarting my adapter
     2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
     3)  Using the IP Config in Command Prompt
         ipconfig /flushdns
         ipconfig /registerdns
         ipconfig /release
         ipconfig /renew
     4) Using the NetSh reset in Command Prompt and restarting my laptop
         netsh int ip reset c:\resetlog.txt
         netsh winsock reset
         ipconfig /flushdns
         [restart laptop]
     5)  Configuring the TCP/IP in several settings
        Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
        I have used the following settings:
           a) Obtain an DNS server address automatically
           b) OpenDNS
               208 67 222 222
               208 67 220 220
           c) Google DNS
               8 8 8 8
               8 8 4 4
     6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014.  It still did not resolve the issue.  My laptop
    manufacturer as not come up with an driver update for my adapter since 2010.  I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
    instead and frankly it didn't make much of a difference when I did it the first time.
     7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
           Computer Browser [changed from manual to automatic]
           DHCP Client [already set to automatic]
           DNS Client [already set to automatic]
           Network Connections [already set to automatic]
           Network Location Awareness [changed from manual to automatic]
           Remote Procedure Call (RPC) [already set to automatic]
           Server [already set to automatic]
           TCP/IP Netbios helper [already set to automatic]
           Workstation [already set to automatic]
    ...and I'm still having DNS issues.
    My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
    Avast Anti-Virus with Microsoft Network Firewall.  I've had DNS issues with both anti-virus/firewall set ups.
    Below are the results from the diagnostics and tests that I've ran.
    Windows Network Diagnostics
    Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
    Contact your network administrator or Internet service provider (ISP) Completed
    Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
    Details about network adapter diagnosis:
    Network adapter Wireless Network Connection driver information:
       Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
       Manufacturer  . . . . . . . . . : Intel Corporation
       Provider  . . . . . . . . . . . : Intel
       Version   . . . . . . . . . . . : 13.2.1.5
       Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
       Inf File Date . . . . . . . . . : Monday, June 14, 2010  9:05:44 AM
       Section Name  . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
       Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
       Instance Status Flags . . . . . : 0x180200a
       Device Manager Status Code  . . : 0
       IfType  . . . . . . . . . . . . : 71
       Physical Media Type . . . . . . : 9
    Informational Diagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    Information for connection being diagnosed
     Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
     Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
     Interface type: Native WiFi
    Connection incident diagnosed
     Auto Configuration ID: 1
     Connection ID: 1
    Connection status summary
     Connection started at: 2015-03-07 19:57:14-186
     Profile match: Success
     Pre-Association: Success
     Association: Success
     Security and Authentication: Success
    List of visible access point(s): 22 item(s) total, 22 item(s) displayed
            BSSID        BSS Type PHY    Signal(dB)    Chnl/freq    SSID
    60-02-92-C6-D3-E8    Infra     <unknown>    -62        11     HOME-C7D4-2.4
    60-02-92-A1-75-E0    Infra     <unknown>    -58        6     HOME-B917-2.4
    00-1D-D5-D5-34-F0    Infra     <unknown>    -73        6     HOME-34F2
    60-02-92-A1-75-E1    Infra     <unknown>    -58        6     (Unnamed Network)
    06-1D-D5-D5-34-F0    Infra     <unknown>    -78        6     xfinitywifi
    C4-27-95-C9-C4-2D    Infra     <unknown>    -57        1     HOME-C42D
    02-1D-D5-D5-34-F0    Infra     <unknown>    -74        6     (Unnamed Network)
    00-0D-97-07-E0-79    Infra     g    -75        6     (Unnamed Network)
    00-1D-CF-2A-44-C0    Infra     <unknown>    -86        6     HOME-44C2
    02-1D-CF-2A-44-C0    Infra     <unknown>    -86        6     (Unnamed Network)
    F8-E4-FB-3C-87-A2    Infra     <unknown>    -89        6     YVNM7
    06-1D-CF-2A-44-C0    Infra     <unknown>    -87        6     xfinitywifi
    0C-F8-93-7A-13-50    Infra     b    -87        6     PKennedy
    06-F8-93-7A-13-50    Infra     b    -89        6     xfinitywifi
    02-F8-93-7A-13-50    Infra     b    -87        6     (Unnamed Network)
    E0-88-5D-C8-A9-DC    Infra     <unknown>    -80        1     HOME-A9DC
    E2-88-5D-C8-A9-DD    Infra     <unknown>    -79        1     (Unnamed Network)
    16-CF-E2-43-0B-30    Infra     <unknown>    -88        1     xfinitywifi
    60-02-92-F0-A8-C0    Infra     <unknown>    -90        11     HOME-96A6-2.4
    60-02-92-C6-D3-E9    Infra     <unknown>    -63        11     (Unnamed Network)
    02-1D-D4-EB-87-00    Infra     <unknown>    -88        11     (Unnamed Network)
    06-1D-D4-EB-87-00    Infra     <unknown>    -88        11     xfinitywifi
    Connection History
     Information for Auto Configuration ID 1
      List of visible networks: 13 item(s) total, 13 item(s) displayed
      BSS Type PHY    Security    Signal(RSSI)    Compatible    SSID
      Infra     <unknown>    Yes        63    Yes        HOME-C7D4-2.4
      Infra     <unknown>    Yes        70    Yes        HOME-B917-2.4
      Infra     <unknown>    Yes        43    Yes        HOME-34F2
      Infra     <unknown>    Yes        70    Yes        (Unnamed Network)
      Infra     <unknown>    No        40    Yes        xfinitywifi
      Infra     <unknown>    Yes        71    Yes        HOME-C42D
      Infra     g    No        43    Yes        (Unnamed Network)
      Infra     <unknown>    Yes        28    Yes        HOME-44C2
      Infra     <unknown>    Yes        20    Yes        YVNM7
      Infra     b    Yes        21    Yes        PKennedy
      Infra     <unknown>    Yes        33    Yes        HOME-A9DC
      Infra     <unknown>    Yes        35    Yes        (Unnamed Network)
      Infra     <unknown>    Yes        16    Yes        HOME-96A6-2.4
      List of preferred networks: 3 item(s)
       Profile: xfinitywifi
        SSID: xfinitywifi
        SSID length: 11
        Connection mode: Infra
        Security: No
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: Yes
       Profile: HTC Portable Hotspot 9F50
        SSID: HTC Portable Hotspot 9F50
        SSID length: 25
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
       Profile: belkin.332
        SSID: belkin.332
        SSID length: 10
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
     Information for Connection ID 1
     Connection started at: 2015-03-07 19:57:14-186
      Auto Configuration ID: 1
      Profile: xfinitywifi
      SSID: xfinitywifi
      SSID length: 11
      Connection mode: Infra
      Security: No
      Pre-Association and Association
       Connectivity settings provided by hardware manufacturer (IHV): No
       Security settings provided by hardware manufacturer (IHV): No
       Profile matches network requirements: Success
       Pre-association status: Success
       Association status: Success
        Last AP:  06-1d-d5-d5-34-f0
      Security and Authentication
       Configured security type: Open
       Configured encryption type: None
       802.1X protocol: No
       Key exchange initiated: Yes
        Unicast key received: No
        Multicast key received: No
       Number of security packets received: 0
       Number of security packets sent: 0
       Security attempt status: Success
     Connectivity
       Packet statistics
        Ndis Rx: 2068
        Ndis Tx: 2543
        Unicast decrypt success: 0
        Multicast decrypt success: 0
        Unicast decrypt failure: 0
        Multicast decrypt failure: 0
        Rx success: 3954
        Rx failure: 0
        Tx success: 537
        Tx failure: 4
        Tx retry: 2
        Tx multiple retry: 2
        Tx max lifetime exceeded: 0
        Tx ACK failure: 18
       Roaming history: 0 item(s)
    InformationalDiagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Auto Configuration
     Initialize status: Success
    Information for connection being diagnosed
     Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
     Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
     Interface type: Native WiFi
    Result of diagnosis: There may be problem
     Network Connection details from Command Prompt  (some info hidden for security reasons)
    Connection-specific DNS Suffix:
    Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
    Physical Address: ‎00-23-15-54-19-B8
    DHCP Enabled: Yes
    IPv4 Address: 192.168.X.XX
    IPv4 Subnet Mask: 255.255.XX.X
    Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
    Lease Expires: Saturday, March 07, 2015 8:24:44 PM
    IPv4 Default Gateway: 192.168.X.X
    IPv4 DHCP Server: 192.168.X.X
    IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
    IPv4 WINS Server:
    NetBIOS over Tcpip Enabled: Yes
    Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
    IPv6 Default Gateway:
    IPv6 DNS Server:
    Results of Ping and Trace Route in Command Prompt
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>ping 127.0.0.1
    Pinging 127.0.0.1 with 32 bytes of data:
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Ping statistics for 127.0.0.1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Windows\system32>ping www.youtube.com
    Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
    Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
    Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
    Request timed out.
    Request timed out.
    Ping statistics for 173.194.121.6:
        Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 19ms, Maximum = 24ms, Average = 21ms
    C:\Windows\system32>ping 74.125.239.34
    Pinging 74.125.239.34 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
    Request timed out.
    Ping statistics for 74.125.239.34:
        Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
    C:\Windows\system32>ping www.hotmail.com
    Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
    Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
    Request timed out.
    Request timed out.
    Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
    Ping statistics for 65.55.157.204:
        Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 111ms, Maximum = 1537ms, Average = 824ms
    C:\Windows\system32>ping 207.46.11.236
    Pinging 207.46.11.236 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Ping statistics for 207.46.11.236:
        Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
    C:\Windows\system32>tracert www.youtube.com
    Tracing route to youtube-ui.l.google.com [173.194.121.5]
    over a maximum of 30 hops:
      1    19 ms    13 ms    17 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    13 ms    13 ms    27 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
      3    20 ms    26 ms    21 ms  he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
      4    18 ms    34 ms    22 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5    19 ms    18 ms    18 ms  50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
      6    35 ms    18 ms    18 ms  209.85.249.217
      7    21 ms    19 ms    19 ms  72.14.233.93
      8     *        *        *     Request timed out.
      9     *     2509 ms   677 ms  iad23s25-in-f5.1e100.net [173.194.121.5]
    Trace complete.
    C:\Windows\system32>tracert 74.125.239.34
    Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
    over a maximum of 30 hops:
      1    54 ms    23 ms    12 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    22 ms    19 ms    17 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    19 ms    19 ms    18 ms  he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
      4    18 ms    18 ms    18 ms  he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
      5    19 ms    18 ms    22 ms  50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
      6    22 ms    36 ms    19 ms  209.85.249.217
      7    26 ms    23 ms    25 ms  209.85.143.112
      8     *        *        *     Request timed out.
      9     *        *        *     Request timed out.
     10   972 ms     *        *     216.239.51.97
     11   148 ms    97 ms    95 ms  216.239.46.241
     12   324 ms   130 ms   432 ms  209.85.246.252
     13     *        *        *     Request timed out.
     14  1403 ms   101 ms   126 ms  nuq04s19-in-f2.1e100.net [74.125.239.34]
    Trace complete.
    C:\Windows\system32>tracert www.hotmail.com
    Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
    over a maximum of 30 hops:
      1    13 ms    13 ms    25 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    13 ms    15 ms    13 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    20 ms    19 ms    17 ms  he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
      4    17 ms    20 ms    20 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5    17 ms    18 ms    38 ms  as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
      6    18 ms    18 ms    36 ms  ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
      7     *        *        *     Request timed out.
      8     *     2191 ms    35 ms  ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
      9     *        *        *     Request timed out.
     10     *        *        *     Request timed out.
     11    86 ms    84 ms    84 ms  ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
     12    86 ms    86 ms    87 ms  ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17    87 ms    84 ms    85 ms  origin.by173w.bay173.mail.live.com [65.55.157.144]
    Trace complete.
    C:\Users\C.Cunningham>tracert 207.46.11.236
    Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
    over a maximum of 30 hops:
      1    16 ms    16 ms    19 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    18 ms    13 ms    13 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    21 ms    19 ms    21 ms  he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
      4    18 ms    21 ms    18 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5     *        *        *     Request timed out.
      6     *        *        *     Request timed out.
      7     *        *        *     Request timed out.
      8     *        *        *     Request timed out.
      9     *        *        *     Request timed out.
     10     *        *        *     Request timed out.
     11     *        *        *     Request timed out.
     12     *        *        *     Request timed out.
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17     *        *        *     Request timed out.
     18     *        *        *     Request timed out.
     19     *        *        *     Request timed out.
     20     *        *        *     Request timed out.
     21     *        *        *     Request timed out.
     22     *        *        *     Request timed out.
     23     *        *        *     Request timed out.
     24     *        *        *     Request timed out.
     25     *        *        *     Request timed out.
     26     *        *        *     Request timed out.
     27     *        *        *     Request timed out.
     28     *        *        *     Request timed out.
     29     *        *        *     Request timed out.
     30     *        *        *     Request timed out.
    Trace complete.
    Results of Intel WiFi Manual Diagnostics
    Test Name                 Test Result   Test Summary
    Hardware Test           Passed        Wireless Hardware is enabled
    Driver Test                 Passed        Diver is loaded. NETwNs64 Version 13.3.0.24
    Radio Test                  Passed       Radio is ON
    Scan Test                   Passed       There are 25 Networks available to connect
    Association Test        Passed       Associated
    Authentication Test   Passed       Authenticated
    Signal Test                Passed       Signal Quality: Poor
    Ping Test                  Failed          No Reponse: default gateway, DHCP server
    I hope this information is enough to get to the root of this problem once and for all.  Please let me know if you any other information such as event logs or statistics. 
    Thanks in advance.

    Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
    #Event  Source  Time     
    Error Severity    Domain               
    User      Description
    45           EvtEngine           
    3/8/2015 20:40  Success               
    Connection         SYSTEM               
    iAMT - Failed to read Windows Events Log
    46           S24EvMon          
    3/8/2015 20:41  Information       
    AppDriver          
    SYSTEM               
    Getting List of adapters.
    47           S24EvMon          
    3/8/2015 20:41  Information       
    AppDriver          
    SYSTEM               
    Intel adapter(s) found.
    156         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
    157         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
    158         S24EvMon          
    3/8/2015 20:47  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
    159         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    160         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
    161         S24EvMon          
    3/8/2015 20:47  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    162         S24EvMon          
    3/8/2015 20:47  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -77
    163         S24EvMon          
    3/8/2015 20:49  Information       
    TCP/IP  SYSTEM               
    VoIP: Got link down - deleting flows .
    164         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
    165         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    166         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    167         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
    168         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    169         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    170         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
    171         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    172         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
    173         S24EvMon          
    3/8/2015 20:49  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    174         S24EvMon          
    3/8/2015 20:49  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -81
    175         S24EvMon          
    3/8/2015 20:50  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
    176         S24EvMon          
    3/8/2015 20:50  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
    177         S24EvMon          
    3/8/2015 20:50  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    178         S24EvMon          
    3/8/2015 20:50  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -80
    179         S24EvMon          
    3/8/2015 21:03  Information       
    Driver    SYSTEM               
    RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
    186         S24EvMon          
    3/8/2015 21:21  Information       
    General               
    SYSTEM               
    DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
    187        
    S24EvMon          
    3/8/2015 21:21  Information       
    General               
    SYSTEM               
    DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31)

  • HT2500 how do i get my mail from the pop server to my inbox

    Can someone please help me ! I'm sure I did something by accident and don't know how to fix it. My problem is i don't see any emails in my inbox, however my account info says there is mail on the pop server. how do i get the mail from the pop server to my inbox?
    thank you for helping

    First try rebuilding your Inbox.
    Select the Inbox.
    Under Mailbox in the Menu bar select Rebuild (last option in list)
    Note: If you delete a POP account in Mail, it will delete any messages in the Inbox. It does not delete your custom folders or your sent messages.
    If the messages have been deleted and are no longer on the server, you can restore from Time Machine.
    Let us know if this helps.

  • HT1688 This morning loaded 7.0.4 and noticed that my email pop server will not download email and when I try to delete apps the X doesn't pop up in the left corner anymore.  The app wiggles but the X is gone.

    This morning after downloading 7.0.4 I've noticed that my email POP server will not download my email.  Also you can not delete apps.
    With the app wiggling the "X" doesn't appear in the upper left corner which allows you to delete that particular app. I have told friends
    that are still on 7.0.3 not to download 7.0.4.

    The "x" only appears on apps that you are allowed to delete. You cannot delete the Apple-supplied Apps like Mail. There is no problem here with iOS 7
    Also make sure that you do not have a restriction set on "deleting apps". If this is set you will not be able to delete any App. See Settings > General > Restrictions

  • TS3899 Cannot Get Mail The mail server is not responding. Verify that you have entered the correct account info in mail settings. What can I do?

    When I try to access Mail I get the following message "Cannot Get Mail. The mail server is not responding. Verify that you have entered the correct account info in Mail Settings". I have entered the correct account details and even deleted them and re-entered them but to no avail, Help.

    Try deleting the email account and readding it in the "other" tab instead of Yahoo/gmail, etc

  • The iPad update server could not be contacted. Please check your internet connection or try again later.

    Cant update my sons ipad 2 to ios 5. We got it at christmas and have not been able to update it. Keep getting the ipad update server could not be contacted. check your internet connections or try again later. I have tried turning off my firewall and tried at all times of the day or night. Im using windows 7 on my PC.

    The only other thing that I can think of to try is to restart everything. Quit iTunes, reboot your PC, restart the iPad and then try again.
    Here is an article about troubleshooting iPad updating issues. It could be some other security settings that you have that are blocking the update from proceeding. There are a number of things that are discussed in this support article. Check it out and see if there is anything in it that you can try.
    http://support.apple.com/kb/ts1275

  • My screen says VPN connection you were disconnected because the ppp server is not responding try reconnecting.  When I hit "O.K." IPad shuts down.  Any suggestions, please?

    My screen says VPN connection you were disconnected because the PPP server is not responding.  Try reconnecting.  When I touch "O.K." screen goes dark after a couple of seconds.  Any ideas to solve this, please? 

    I have no solution. I am using Lion on Mac Air connecting to 3g using a Huawei 156 dongle modem and  i keep getting cut off with this message
    You were disconnected because the PPP server is not responding.
    I need a solution too

  • "The L2TP-VPN server did not respond"

    I just bought an Airport extreme base station, and installed lion server, and configured it for VPN. I have checked all my settings and even looked using AirPort utility. I have tried connecting to my VPN from 2 different Macs and an iPad, and all yield the same error:"The L2TP-VPN server did not respond". When I look at my vpnd.log it is pretty bare:
    2011-08-31 18:27:34 EDT          Loading plugin /System/Library/Extensions/L2TP.ppp
    2011-08-31 18:27:38 EDT          Listening for connections...
    it looks like the VPN connection requests aren't making it from the airport to the server. Any ideas

    FWIW, my Lion Server VPN issue has been solved...
    https://discussions.apple.com/thread/2696981?start=30&tstart=0

  • SCOM 2012 R2 installing on SQL 2012 SP1 - Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

    Hi,
    I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
    setup rolls the SCOM install back.
    Has anyone seen this issue before or know how to help resolve it?
    Appreciate your help, below is the SCOM installation log:
    Thanks
    Marc
    [13:27:27]: Always: :Creating Database: OperationsManagerDW
    [13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    : Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
    [14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :Exception running sql string
    DECLARE @sql NVARCHAR(MAX);
    SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
        ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
        LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
    EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion
    of the operation or the server is not responding.
    [14:55:33]: Always: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
    [14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Always: :InnerException.StackTrace:
    [14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or
    the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
       at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
    [14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
    [14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item.  Setting rollback.
    marc nalder

    Hi,
    Based on the log, I recommend you use the following way to test SQL connectivity.
    You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
    if it fails to connect.
    For more information, please review the link below:
    The easy way to test SQL connectivity
    http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for

  • How many Apple TV can sync to one iTunes account

    Hi, I'm googling from the morning to find the answer. I have 2 macbook pro and 1 imac. i have 3 Apple TV at home. As far as i know, i can sync 5 device to one itunes account.iPad, iPhone etc will not count to the account. Did the ATV will come to the

  • Getting rate for my report

    Hi All, I would like some help with this query. This is my sample code: create table myReport( report_id integer, product_class_id integer, place_id integer, fy integer); insert into myReport(report_id, product_class_id, place_id, fy) values (1, 1, 1

  • BAdi for IDOC FM idoc_input_wmmbxy

    Hi, I want to implement my own Method for the function Module idoc_input_wmmbxy. I want to check some condition and show some massages in FM. please tell me if there is any User Exit or BAdi for the IDOC. Thanks Girdhar

  • Script for forward mail as attachment

    Hi, I think there is no direct call for creating forward mail as attachment. I tried "forward" reply and other things.Its working fine. Please let me know if any one have idea for creating script for apple mail "forward as attachment".

  • Missing the end of software maintenance date in Product Alert

    Hi Expert, In offline Product alert report, some of the items which has announced EOS or EOL, but the end of software maintenance date is missing, what does that mean? Thanks, Cristan