Configuring maintanence optimizer

Hi everyone
Can someone help me by providing the documents for configuring maintanence optimizer in the solution manger ( i.e., how to configure the SAP-OSS rfc connection and downloading the support packages )
It is urgent.
Thank you.
kirankumar.

Check note 990534 and the attachemts to this not. THis will help you to configure MOPZ
Follow-up SAP note 990534
--> Goto Transaction SCPR20. In transaction SCPR20, activate the SOLMAN40_MOPZ_TTYP_SLMO_000 BC Set in your Solution Manager clients. Perform the activation in expert mode with the option "Overwrite Everything". You can select expert mode after you have chosen "Activate".
--> Create a new transport request (transaction SE09) in the source client of your Solution Manager system. Unpack file SOLMAN40_MOPZ_TTYP_SLMO_000.zip, which is attached to this note. Copy the contents of the SOLMAN40_MOPZ_TTYP_SLMO_000.txt file into the transport request. Use transaction SCC1 to import the transport request into your Solution Manager client.
Check the following notes aswell
975510
1020789
997780
1025381
1024105
Thanks
Prince Jose

Similar Messages

Maintanence optimizer--terminating at step 1

Hi,
We have our maintanence optimizer in place & were initially able to download sp's.
However,now; after selecting the system,it does not proceed to Step 2.
Also, there is no error.It just displays "Procedure XXXXX saved"
SAP-OSS & SAPOSS RFC's are working fine.
Please help,since we urgently need to download the sp's.
Thanks a lot,
Saba.

Dear Saba,
Could you please implement note no. 1008717 to your system and
check, if problem could be solved?
Should note already be implemented, please read the descriptions from
note 997780 concerning actually missing configuration!
If problem still persists, let me know.
Regards
Amit

Help about Solution Manager Maintanence Optimizer

Hi All,
I have a small confusion how to follow the configuration of Maintenance Optimizer in Solution manager.
Yesterday i installed the solution manager and assigned the ECC server to that solution manager using SMSY transaction.
Now i have to configure maintenance optimizer; what are the doubts i have:
1) I choose 001 client to configure; now i have to create any user with all roles or else can i use sap* ?
2) what are the roles i have to assign that new user?
3) Now what step i have to follow; it mean goto transaction SPRO and follow or any other configuration is required?
Please give me some suggestions...
Thanks & Regards,
Vivek N.

> 1) I choose 001 client to configure; now i have to create any user with all roles or else can i use sap* ?
just create user with profile SAP_ALL and sap_new
> 2) what are the roles i have to assign that new user?
give all authirisation sap_all
> 3) Now what step i have to follow; it mean goto transaction SPRO and follow or any other configuration is required?
check http://service.sap.com/solman-mopz and SAP Note: 1024932
Samrat

How to configuration Maintenance Optimizer in Solution Manager 4.0?

Hi All,
Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
If any one having the document for same then please give me.
My mail id is : - <email address removed by moderator>
Thanks a lot,
Harshal

Hello Harshal,
Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
Another document is attached in Note 990534.
If you have further issues, Note 1024932 might be a good starting point.
Best regards,
Victor

CONFIGURE BACKUP OPTIMIZATION ON;

CONFIGURE BACKUP OPTIMIZATION ON;
above cmd only working on "sbt" type device or it is working also "disk".
plz. let me know. sir.
thanx in advance.

From the docs:
Requirements for Backup Optimization
Backup optimization is used when the following conditions are true:
The CONFIGURE BACKUP OPTIMIZATION ON command has been run to enable backup optimization.
You run BACKUP DATABASE, BACKUP ARCHIVELOG with ALL or LIKE options, or BACKUP BACKUPSET ALL.
Only one type of channel is allocated, that is, you do not mix channels of type DISK and sbt in the same backup command.
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmconc1008.htm#i1008304

Configure Manintainance optimizer

Hi All,
I am new in sap basis.
can any one tell me how to Configure Manintainance optimizer on Solution manager 7.0.
If any one have step by step configuraton guide for solution manger 7.0 please post it or give me some good link where i will get help.
your help on this wil be higly appriciated.
Thanks in advance
Regards
S Kumar

Hello Kumar
STEPS to Configure MOPZ. With SR3
1.     Make an RFC connection to TARGET system from SOLUTION MANGER in sm59.
2.     Go to t-code SMSY and create Logical Component.
Enter the detail of LOGICAL COMPONENT NAME ZXXXXXXX
3. Go to T-code SMSY select the system for which we have created the Logical Component and generate the RFC connections.
In the above screen Header date enter Hostname and Instance number
In the above screen go to client tab and provide the details of the client.
Now if you check after the RFC connections generated it will pull instances and software components automatically.
Go to T-code Solution_manager OR dswp or solutionmanger
From the above screen click on Create.
Give a name for your solution click on continue after that.
Once you click on continue you will find BI landscape in SOLUTION OVERVIEW.
Click on SOLUTION LANDSCAPE MAINTENANCE .
You will come to this screen above once you click on solution landscape maintenance here go to the dropdown and select the logical component which we have created for BI LANDSCAPE i.e. ZBIDEV
Select and click on continueu2026
Then go to Tcode SMSY select the system you have define and click on Assign ment   to logical component (CAUTION permanent license has to be installed)
Go to tcode AISUSER this is used to define the SUSERID to log in to service.sap.com
For the user to work you need to make a connection RFC through SAP ROUTER
To make the RFC connection get the router details were SAP router is running check the screen shots below to get router info:
Go to tcode oss1
From the menu select paramerter and click technical settings
Make a note of SAPROUTER @ SAP ip address and the name.
With the above information make an RFC connection from SM59 how to do that?
Select SAP-OSS
Enter the Target System
Message Server information
Group
Select IP address
Mention the Client as 001
Under USER: Provide the S-User Id and the password through which you are connecting to market place to download the software.
Then, check if the connection is successful. If the connection fails, then check whether your SAP ROUTER is running or not.
Go to the server where SAP ROUTER is configured and execute SAPROUTER u2013r.
Go to T-code Solution_manager or DSWP and select your landscape
Select Maintenance Optimizer from Change Management Tab
Click on Create New Maintenance Transaction
Select the System from the drop-down and Continue the on screen instructions.
Also use the following link for AP Solution Manager Maitenance Optimizer
UPGRADE SESSIONS: What's SAP Solution Manager Maitenance Optimizer?
Hope the above steps are useful.
Regards,
Satish.

Configure maintenance optimizer

Hi,
I am configuring "Configure Maintenance Optimizer" and I get the following error when I use T-code SM_MOPZ.
SAP MOPZ auto-configuration warnings
Message no. IMG_FASTCONF030
What's happen with my SOLMAN system?
Please advise!!
Thanks
Duypm

Hi Duypm,
Its a long process to go.
First, Raise a message with SAP for SAPROUTER certificate if you are planning to use SNC. You need to provide a public IP of your SAPRouter machine in the message.
Second, Send the filled form to SAP
Configure SNC on SAPRouter
Configure OSS1 and SAPOSS rfc destination.
Then configure Maintenance Optimizer.
Cheers.....,
Raghu

How to configure maintanace optimizer in solution manager

Hi,
How to configure maintanace optimizer in solution manager.
Regards,
Asif

Hi,
Check this link... it has complete step by step configuration of Maintenance Optimizer...
https://websmp105.sap-ag.de/~sapidb/011000358700000235502007E
http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/90454eea-3564-2a10-d0b9-c84d468365ab
http://help.sap.com/saphelp_smehp1/helpdata/en/46/418970cdb45fabe10000000a1553f7/frameset.htm
https://websmp210.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp210.sap-ag.de/~sapidb/011000358700000086862008E.sim
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1787522650DB00553277662805589317End?blog=/pub/wlg/8217
Also, http://service.sap.com/rkt-Solman --> Technology Consultant & System Administrator -> Technical configuration ->configuaration of Basic settings in solman, Mopz simple usage and normal usage
Thnx,
Waseem.

Solution Manager (SP 10) Maintanence Optimizer

Hi,
While configuring the Maintenance Optimizer, using the Activity "Activate Integration with Change Request Management" In the 1st activity list "Activate Change Request and Set - up Client by mistake i entered the wrong client id, and now it just doesnt let me change it.
Is there anyway that I can change it?
Also when I click on Maintanence Optimzer button, in Support Package and Stack Inbox I get the following error " Local logical system is not defined ". What does it mean? Is it because of the wrong client ID that i mentioned about above?
Any help on this will be much appriciated.
Thanks,
Vikram

Transcation SPRO
IMG Activity -> Sap Solution Manager -> Initial Configuration ->
Solution Manager - > General Configuration -> Maintain Logical Systems
Define Logical System
Add a unique ID and some name, then assign this logical system to the client you are using for Optimizer in the "Assign client to System.
I would suggest that you also do all the initial IMG activity step by step.

Configuring Maintenance Optimizer issue

Hi All,
This is the first time I am configuring SM 4.0. I am done with installation, and want to conigure maintenance optimizer.
I followed the IMG guide step by step.
But after all done, there are no systems listed under the maintenance optimizer of my Solution Landscape.
Instead I get a message:
<b>Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).</b>
Meanwhile I have issue with my J2EE engine not starting due to some UME issues, which I am working on parallely.
Please do let me know what would be the issue.
I have followed the note 990534 and doen with the BC sets.
But I am not sure where am I making a mistake.
One more doubt is, does maintenance optimizer connect to the SAP service market place through SAPOSS??? and am I not seeing anu system because my SLD is down. Please bear with my ignorance, I am a little lost here.
I have completed the solution landscape, logical component, etc.
Please help...
Regards,
Sapfan

Hi JP,
My current SP levels are:
SAP_BASIS - 0011
SAP_ABAP - 0011
PI_BASIS 2005_11 - 0011
ST-PI 2005_11 - 0003
SAP_BW - 0011
SAP_AP - 0007
BBPCRM 5 - 0007
CPRXRPM - 0007
ST400 - 0010
ST-ICO - 0008
ST-SER - 0007
The issue is I did not connect to SAP yet, as I have only one RFC generated i.e. SAPOSS> Since my SAPRouter is not yet configured, I will connect to a valid SAPRouter once all the SM config is done.
I als got sone error in generating RFC for the main system when I used the wizard. I selected Change management and customizing directory and also selected Assign RFC for system monitoring.
I changed back the UME source to client 001, but still same.
Moreover the maintenance optimizer is not showing the satellite system.
I am really stuck.
Please let me know if you require more information.
I created the main system and defined the solution, as per the SPRO->Solution Manager -> Advanced Configuration -> Basic settings ->
I started this only after applying SP10.
Now I don see the systems both for Setup Solution monitoring and in maintenance optimizer.
WIll the system not reflect is the java ebngine is down???
Regards,
P.K

Error in Configuring Maintenance Optimizer

Dear Experts,
i am using solman7 with sp12, when i am configuring the RFC to target system i am getting following errors please help me need full
Error creating RFC destination 'SM_KSMCLNT100_BACK' in system 'KHD'
Message no. SMSY_EDIT_LANDSCAPE163
RFC destination SM_KSMCLNT100_BACK generation error
Message no. SMSY_EDIT_LANDSCAPE049
No RFC destination assigned for read access for client 010
Message no. SMSY_EDIT_LANDSCAPE150
Diagnosis
You tried to assign RFC destinations for the system KHD for central system monitoring, but there is no RFC destination for read access for the current client (010).
System Response
The RFC destinations cannot be assigned to the system monitoring.
Procedure
1. Assign an RFC destination for read access to the client (010), or generate an RFC destination for read access for the client.
2. Assign the RFC destination for system monitoring again.
Alternatively, you can use transaction RZ21 to make this assignment
directly (choose Technical Infrastructure -> Display Topology).
Regards
Chandra

Hi,
check the following in RFC
1. Correct solman ip
2. Correct user id/pwd
3. the user profile includes the auth. obj. - S_RFC, S_RFCACL
4. check if proper entries or made in services file (windows)
This will solve your problem.
Feel free to revert back.
--Ragu

New Hard drive configuration to optimize performance

Hi,
I just want to make sure I have the ultimize hard drive setup for performance. I have a in bays:
1) 640 (Caviar Black for applications)
2) 1gb (Caviar Black for documents/media)
3) 1gb (Caviar Black for FCP/Photoshop scratch disk)
4) 1gb (Seagate- just back-up drive /2nd back-up for external 1gb lacie drive/time machine)
Any feedback will be very helpful!

If you are using 100GB projects, maybe an external raid option for scratch would serve you better, like an external enclosure of disks.
If that's too expensive, utilize the 2 extra ODD sata ports.
Either put an extra drive in the lower optical bay,
http://www.tenthousandpercent.com/?section=other&article=65
OR grab the the esata extension from newertech combined with OWC mercury elite pro. Pretty affordable considering your needs.
http://eshop.macsales.com/item/Newer%20Technology/MPQXES2/
http://eshop.macsales.com/item/Other%20World%20Computing/MESATATBEK/

Solman_setup and maintenance optimizer configuration

Hi
We've newly installed Solution Manager 7.0 EHP1 and we want to configure maintenance optimizer for approving SP. Is it mandatory to use solman_setup tcode or can we configure maintenance optimizer via tcode solution_manager and smsy.
Best Regards...

Hi
IT better if u use Solman_setup because it will run a wizard and do the needful and in a proper manner but still if u are expert and have already done the setting in previous version then u can it urslf.
Go through the links to know more about this solman_setup wizard settings.
New Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700001927282008E
Demo on Guided Procedure for Configuration of SAP Solution Manager
https://websmp203.sap-ag.de/~sapidb/011000358700000316542009E/Procedure_Configuration.exe
Hope it will help ur more
Regards
Prakhar

Configuration of Maintenance Optimizer and IMG-configuration

Hi!
I am installing SAP Solution Manager 4.0 and two ERP-systems and would like to ask, whether a suitable detailed documentation about
Configuring Maintenance optimizer
IMG-Configuration
does exist?
P.S. Besides the document "Step by step Confugaration of Maintenance Optimizer" or .sim-File.
Thank you very much indead!
regards

Dear Axel,
Kindly review the URL :
http://service.sap.com/solman-mopz
On the first page at the bottom end you would find an PDF for configuration of Maintenance Optimizer and also an SAP Tutor file for the same.
Follow the steps and you are ready with the optimizer for downloading packages.
Hope the above information helps.
Regards
Amit Devale

Maintenace Optimizer configuration issue

Hi,
I configured maintenance optimizer step by step as mentioned SAP. But getting a short dum when executing transation code solution_manager ->Change managemnet->Support Package Stacks-> "Maintenance Optimizer"
Following is the short dump :
Runtime Errors         MESSAGE_TYPE_UNKNOWN
Date and Time          13.04.2007 17:07:46
Short text
     Message type " " is unknown.
What happened?
     Error in the ABAP Application Program
The current ABAP program "/TMWFLOW/CL_MO_UI_REQUEST_MODLCP" had to
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     Only message types A, E, I, W, S, and X are allowed.
Trigger Location of Runtime Error
     Program                                 /TMWFLOW/CL_MO_UI_REQUEST_
     Include                                 /TMWFLOW/CL_MO_UI_REQUEST_
     Row                                     37
     Module type                             (METHOD)
     Module Name                             CRM_MODEL_GET
Please suggest me to resolve the issue?
Regd,
Harish

Hello Harish,
Ensure SAP Note 1024932 has been implemented.
Would you please double check the note:
990534     Solution Manager Maintenance Optimizer: BC Set
especially the following part:
To do this, implement the correction instructions of this note
into your system. These correction instructions create report
SM_PREP_MAINTENANCE_OPTIMIZER in your system. Use transaction
SE38 to execute this program in your Solution Manager client.
After you successfully execute this program, the Maintenance
Optimizer is configured.
Call transaction SE80 and select Repository Browser -> Program.
Enter the program name: SM_PREP_MAINTENANCE_OPTIMIZER
Select the glasses.
Now select the 1st line from the tree and with the right mouse click
select "Activate".
When you have succesfully activated the objects, please call transaction
SE38 and run program: SM_PREP_MAINTENANCE_OPTIMIZER.
The configuration for the Maintenance Optimizer will be done by the
report.
Hope this helps,
Dolores

Configuring maintanence optimizer

Similar Messages

Maybe you are looking for