Configuring Mavericks Server for AUSST 3.0

Could someone please explain to me how to configure an OSX 10.9 server to host updates?  I have downloaded all the updates and am now having trouble configuring the server to share out my updates folder.  The instructions that Adobe provides are more geared towards Windows servers.  Any help would be much appreciated.

Anyone?

Similar Messages

  • How to configure SMTP server for osb 10.3.1

    Hi All,
    Can anyone share information on how to configure SMTP server for osb 10.3.1
    and then how to send an email from osb 10.3.1
    Thanks in Advance!!

    Thanks a lot!!
    I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
    Please suggest something.

  • How to configure mail server for subscription

    Hi,
    I want to test subscription. My problem is how to configure the mail server.
    As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
    My steps are:
    1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
    2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
    3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
    After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
    Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
    Thanks,
    Ray

    Hi Vineeth,
    Thanks for help.
    According to your steps:
    1. set up a mail transport and making notification and mailing service active.
       In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
      In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
      Name: JavaMailTransport
      SMTP Server: smtp.yahoo.com
      Sent message folder: /documents
      System alias name: mytransport
    2. Give everyone read permission on notifications in KM.
      Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
    3. Check if proper id's are maintained in users profile.
      How to do this?
    Thanks for help~~
    Regards,
    Ray

  • Installing and configuring unification server for EP 6.0 SP14

    hi
    Do we need to install a seprate server for Unification with MS SQL as the Database for enabling Drag & Relate feature with R/3 and EP 6.0 SP14
    Does any one have the steps to be perfomed for attaing this feature
    Thanks a lot
    Jonu Joy

    Hi,
    No need to install any separate server for enabling Drag and Relate between SAP R/3 and EP 6.0 SP14.
    We need to install a separate R/3 unifier in EP5.0 for enabling Drag&Ralate feature. But R/3 unifier comes with EP 6.0 by default.
    Check the below Unification Cookbook for for enabling Drag and Relate between SAP R/3 and EP 6.0 SP14.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ca06cc79-0601-0010-b380-fbf1eb4babe5
    Thanks,
    Ramakrishna

  • Configuring Weblogic Server for X.509 Smart Card Authentication

    0 down vote favorite
    share [g+] share [fb] share [tw]
    I am running Oracle Weblogic 11g (10.3.6) and attempting to configure two-way SSL (client certificate requested and enforced). The client certificate is on a smart card.
    I have enabled "basic" ssl in the weblogic server, and used keytool to import the relevant root CA certificates into the DemoTruststore.jks file. I have set the Two-way client cert behavior to Client Certs Requested and Enforced for the server.
    Unfortunately, attempting to access my application causes the following:
    <pre>
    <Certificate chain received from 127.0.0.1 - 127.0.0.1 was incomplete.>
    <NO_CERTIFICATE alert was received from 127.0.0.1 - 127.0.0.1. Verify the SSL configuration has a proper SSL certificate chain and private key specified.>
    <Certificate chain received from 127.0.0.1 - 127.0.0.1 was incomplete.>
    </pre>
    The ActivClient dialog never appears to select a certificate from the Smart Card, and a pin is never requested. Therefore, I think I misconfigured something.
    Help would be greatly appreciated.
    Jason

    Hello Mukunthan Damodharan,
    this means that the SSL Server Certificate has not his fully quallified name in the subject alternative name extension of the X.509 certificate.
    You can create a valid one or disbale that check in the Secure Login Client.
    How does the configuration gets to the clients?
    With the Policy Download you can disable that check over the Secure Login Server Administration console in the corresponding authentication profile.
    If manually you can change the following registry key:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\SAP\SecureLogin\profiles\<profile name>
    "sslHostAlternativeNameCheck"=dword:00000000
    the value 0 disable that check on the client.
    best regards
    Alexander Gimbel

  • Configuring TACACs Server for Cisco VPN 3000

    Does anyone know how to get to the configuration setting to specify a TACACs server?

    You need to be very careful when setting
    up this thing. If the AAA server is down
    for whatever reason, you will NOT be able to
    log into the Concentrator again. As far
    as the VPn3k console is concerns, it will
    let you login with the "admin" account,
    even though the AAA is up and running. In
    other words, you can login from console
    with both "admin" and AAA account at the same
    time.
    What a mess.

  • Configure database server for only run report

    Dear all,
    I have to design architecture a server to run only report from a client and i have some question as the following:
    1.Should i separate the from the production?
    2.How i will move data from production to a server report for fast?
    3.How i will config a database for a good performance?
    Thks for advance !
    Chara

    There is an severel option in database installation point which you can deside the type of database you want. (transaction, read only so on. )
    And try to configure SGA.
    http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96533/memory.htm#34133<br%20/>
    upul indika.
    null

  • Configure HTTP server for iAS

    Hi Friends,
    In configuring iAS HTTP server which one among the .conf it created is called
    "Database Access Descriptor(DAD)"? I am confused with lots of .conf
    in the directory $ORACLE_HOME/Apache/ who is the DAD here.
    ========
    /u02/visora/iAS/Apache/Apache/conf/mod__ose.conf
    /u02/visora/iAS/Apache/Apache/conf/srm.conf
    /u02/visora/iAS/Apache/Apache/conf/access.conf
    /u02/visora/iAS/Apache/Apache/conf/httpds.conf
    /u02/visora/iAS/Apache/Apache/conf/httpd.conf
    /u02/visora/iAS/Apache/Apache/conf/httpd_pls.conf
    /u02/visora/iAS/Apache/Apache/conf/oracle_apache.conf
    /u02/visora/iAS/Apache/Apache/conf/imeeting.conf
    /u02/visora/iAS/Apache/Apache/conf/apps.conf
    /u02/visora/iAS/Apache/Apache/conf/security.conf
    /u02/visora/iAS/Apache/Apache/conf/trusted.conf
    /u02/visora/iAS/Apache/Apache/conf/oprocmgr.conf
    /u02/visora/iAS/Apache/Apache/conf/url_fw.conf
    /u02/visora/iAS/Apache/modplsql/cfg/plsql_pls.conf
    /u02/visora/iAS/Apache/modplsql/cfg/plsql.conf
    /u02/visora/iAS/Apache/modplsql/prepatch/cfg/plsql.conf
    /u02/visora/iAS/Apache/modplsql/prepatch/cfg/plsql_pls.conf
    /u02/visora/iAS/Apache/Jserv/etc/jserv.conf
    /u02/visora/iAS/Apache/modimeeting/conf/mod_imeeting.conf
    /u02/visora/iAS/Apache/jsp/conf/ojsp.conf
    ====================
    Thanks a lot

    Post it on EBS forum General EBS Discussion
    --Shiv                                                                                                                                                                           

  • Parallels Server For Mac configuration (or any VM product), best practices

    What is the recommended practice for configuring Parallels Server For Mac on an XServe?   The xserve has 3 hard drive bays.   What do most people do to maximize uptime, failover, disaster recovery, etc.  We do have 3 different physical xserves with PSfM also.
    Is a software RAID recommended for the boot OS drive? for the drive storing the VMs if not the same drive?
    How are your hard drives configured?
    I'm concerned that mirroring two 1TB hard drives and using that for both the host OS and for the VMs will present problems:
    When creating new VMs, copying large amounts of data, etc, I'd guess that moving 10-100 GB of data is tasking for the software raid and will noticeably affect performance for all VMs.
    If one of the mirrored drives fails and the raid needs to be rebuilt, this probably would bring the entire system to a crawl, at best, and possibly be unusable while it works to repair the raid.  Thus it would have to be done during off peak hours.  This would prevent a complete outage though.
    are these correct assumptions?

    Hello there,
    There is no upgrade path from Server 2012 Essentials to R2.  R2 is not an upgrade, it is a new build.  Essentials does not upgrade easily, you will want to perform a migration of the server.  This will require additional hardware.  You
    can possibly backup the 2012 Essentials, build a temp server on workstation hardware just to do the migration from,  restore the backup to the new server and then perform the migration to R2. 

  • How to configure mail server

    Hi All,
    we are in a process of configure mail server in one of our sap instance.
    i have done the following settings,
    1. In t-code sicf      under virtual host SAPCONNECT, 
    2.   I  have added  in host data * : *
    3.under handler list CL_SMTP_EXT_SAPCONNECT.
    4. now in scot i have added my deault domain under "settings -> default domain " <company name.com>
    5.on double clicking on SMTP i have added the following entries
      SMTP CONNECTIONS : mail host :  smtp.gmail.com
                                               port : 465
                                           code page : 0
    SUPPORT ADDRESS TYPE : i have set internet address to *
    did i miss any of the steps in configuring the SMTP mail server.
    after sending the mail when i look in to t code  sost the message number displays "672"
    please advice how can i  configure mail server for incoming and outgoing
    Thanks in advance,
    Vardhan

    Hello Vardhan,
    I suggest you to go through the below links and cross check the configuration.
    http://help.sap.com/saphelp_nw04/helpdata/en/66/9c25413fabef23e10000000a155106/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    http://help.sap.com/saphelp_470/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
    Thanks,
    Siva Kumar
    Edited by: Siva Kumar Arivinti on Jan 19, 2012 3:16 AM

  • CSS Sorry Server for HTTPS

    How to configure Sorry server for HTTPS (443) port. Sorry server works fine with HTTP, But not with 443
    In the following config if server1 and server2 are down, the HTTP requests goes to the Sorry Server, but for HTTPS nothing is displayed. I am running the sorry server on port 81
    Please suggest
    !************************** SERVICE **************************
    service prisorry
    ip address 10.100.11.11
    keepalive type http
    keepalive port 81
    port 81
    active
    service secsorry
    ip address 10.100.11.12
    keepalive port 81
    keepalive type http
    port 81
    active
    service server1
    ip address 10.100.11.11
    keepalive type http
    keepalive port 80
    active
    service server2
    ip address 10.100.11.12
    keepalive type http
    keepalive port 80
    active
    !*************************** OWNER ***************************
    owner Loadbalancing
    content L4Rule1
    protocol tcp
    add service server2
    add service server1
    port 80
    url "/*"
    vip address 10.100.11.4
    advanced-balance sticky-srcip-dstport
    primarySorryServer prisorry
    secondarySorryServer secsorry
    active
    content L4Rule2
    protocol tcp
    add service server2
    port 443
    add service server1
    vip address 10.100.11.4
    advanced-balance sticky-srcip-dstport
    primarySorryServer prisorry
    secondarySorryServer secsorry
    application ssl
    active
    content L4Rule3
    add service server2
    protocol tcp
    port 1443
    add service server1
    vip address 10.100.11.4
    advanced-balance sticky-srcip-dstport
    primarySorryServer prisorry
    secondarySorryServer secsorry
    active
    Thanks

    I just deployed a couple 11050's the other day so my experience is limited, but I'd guess your problem is that, when using the Primary Sorry Server, you end up with clients sending HTTPS requests to an HTTP port. Having HTTPS requests redirected to HTTP ports is one thing because the client then makes an HTTP request to that port, but the way you have it above, it appears to me that the client will be talking HTTPS to port 81 on the Sorry Server, which is listening for HTTP.

  • Issues when configure LDAP server in OBIEE

    Hi,
    I have a big issue, I configure LDAP server for authentication of users, and everything looks fine, but my problem is when I log in Interactive Dashbaords, I enter without any problem, but some parameters and some filters and some functions are NOT working, for example:
    -In a parameter I have this condition for Default value: SELECT YEAR(Tiempo.Dia) FROM Finanzas WHERE Tiempo.dia = CURRENT_DATE, and returns me a null value, but if I change to this SELECT YEAR(Tiempo.Dia) FROM Finanzas WHERE Tiempo.dia = CURRENT_DATE-1, returns me "2010"
    I have similar behaviors in other parameters, and some filters and some functions.
    Everything happen in Development instance. I configure LDAP server in Development instance.
    In Production instance nothing of this is happen, but I do not configure LDAP server yet.
    What do anyone think is happen here? This happens because I configure LDAP server? What do you think that mades this behavior for my parameters, filters and functions?
    Do you think is a better practice to clone Production instance to Development instance? If so, how can I do a clone instance, only for OBIEE?
    Regards,
    Arnulfo
    Edited by: ArnulfoPA on 25-may-2010 15:35

    The date returned by CURRENT_DATE is determined by the system in which the Oracle BI Server is running. So, does CURRENT_DATE returns an equal values on prom and dev instances in your case?

  • Using Smbup and Mavericks Server Questions

    Hello everyone and Happy New Year!
    My company has been using Mavericks Server for about three months now and we've had some major hiccups along the way, most of them relating to using Apple's iteration of SMB in a mixed environment. After weeks of research, it appears that it all stems from Apple ditching the official Samba systems after the release of Lion Server; I'm having read-only files after doing all of the possible tweaks with .TemporaryItems permissions, etc. During that research I have numerous threads and suggestions regarding SMBup as an easy method to introduce proper SMB into the Mac Mini Server, however I have a few questions about the software before I employ it on a server that powers a multi-billion dollar business.
    Will SMBup interact with all the users I have already created within the Server app or do I have to recreate everyone in SMBup? If I do have to recreate users in smbup, will I have to do something different to bind the users to groups I've already created as well?
    Will SMBup interfere with any of the permissions I've set with ACLs through the server app or will they be unchanged? I would assume that if the groups exist as normal (previous question) that permissions would be unchanged, but as I said I'd rather not just point and shoot.
    Finally, will anything need to be done for the Mac clients in the office (as in, would I need to install SMBup on client machines as well)?
    I greatly appreciate any and all the assistance you all can provide, unfortunately I never heard back from the developer after several emails over a span of a couple weeks. I figured because of the holidays and a normal developer's working life, that I probably fell through the cracks. Again, thank you and I look forward to any of the answers I can get.
    Daniel

    I normally wouldn't do this but I'm sure someone has experience with this and given the board's limited searching capabilities, I haven't been able to find an answer. So, again anyone familiar with the program?

  • Uninstalling OS X Mavericks Server

    I am a registered iOS Dev and got access to OS X Mavericks Server for free. I decided to take advantage of it, but after realizing how much extra space it was taking on my iMac, I have decided I want to delete it. What is the best way to do so? I would rather not have to wipe the drive and reinstall Mavericks (not server). I do have a Time Machine backup from before I installed the server app, so that is a possibility if that is my best option.

    http://support.apple.com/kb/TS5237
    Hope this helps.

  • How to configure report server in 9iDS

    I am usin P4 and trying to configure report server for 9iDS. But, surprisingly there is no conf file in the \orant\reports\server path after complete installation of 9iDS.
    How should I configure the report server?
    Take care,
    Tarek

    tarek,
    we released a new whitepaper last week about configuring the reports services with iDS for testing your reports. you can find this whitepaper in the reports section here on OTN.
    however. you can either create the reports config file manually or it is created automatically for you if you start up a server and there is no corresponding config file already defined.
    regards,
    philipp

Maybe you are looking for