Configuring Metadevices
I have a Solaris System (v240) running 5.9. The file system is corrupted and there is no backup to restore from. The plan is to install Solaris 10 on this system.
Once we have installed Solaris 10 on this system, partitioning has to be done. I have not done partitioning before on a Sun box. I know that I can use Solaris Volumne Manager to set up the partitioning.
Here is some information from the system that I took, and have not yet installed Solaris 10 on it.
Output from vfstab:
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c1t0d0s1 - - swap - no -
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no
/dev/dsk/c1t0d0s4 /dev/rdsk/c1t0d0s4 /var ufs 1 no
/dev/dsk/c1t0d0s7 /dev/rdsk/c1t0d0s7 /u01 ufs 2 yes
swap - /tmp tmpfs - yes -
/dev/md/dsk/d2 /dev/rdsk/c1t0d0s0 /u02 ufs 2 yes
/dev/md/dsk/d3 /dev/rdsk/c1t0d0s0 /u03 ufs 2 yes
/dev/md/dsk/d4 /dev/rdsk/c1t0d0s0 /u04 ufs 2 yes
/dev/md/dsk/d5 /dev/rdsk/c1t0d0s0 /u05 ufs 2 yes
/dev/md/dsk/d6 /dev/rdsk/c1t0d0s0 /u06 ufs 2 yes
/dev/md/dsk/d7 /dev/rdsk/c1t0d0s0 /u07 ufs 2 yes
/dev/md/dsk/d8 /dev/rdsk/c1t0d0s0 /u08 ufs 2 yes
/dev/md/dsk/d9 /dev/rdsk/c1t0d0s0 /u09 ufs 2 yes
/dev/md/dsk/d10 /dev/rdsk/c1t0d0s0 /u10 ufs 2 yes
metastat:
d10: Concat/Stripe
Size: 92255616 blocks (43 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase Reloc
d33 0 No No
d63 0 No No
d33: Soft Partition
Device: c1t2d0s4
State: Okay
Size: 46137344 blocks (22 GB)
Device Start Block Dbase Reloc
c1t2d0s4 0 No Yes
Extent Start Block Block count
0 1 46137344
d63: Soft Partition
Device: c1t3d0s4
State: Okay
Size: 46137344 blocks (22 GB)
Device Start Block Dbase Reloc
c1t3d0s4 0 No Yes
Extent Start Block Block count
0 1 46137344
d9: Concat/Stripe
Size: 71293056 blocks (33 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase Reloc
d32 0 No No
d62 0 No No
d32: Soft Partition
Device: c1t2d0s3
State: Okay
Size: 35651584 blocks (17 GB)
Device Start Block Dbase Reloc
c1t2d0s3 0 No Yes
Extent Start Block Block count
0 10485762 35651584
d62: Soft Partition
Device: c1t3d0s3
State: Okay
Size: 35651584 blocks (17 GB)
Device Start Block Dbase Reloc
c1t3d0s3 0 No Yes
Extent Start Block Block count
0 10485762 35651584
d8: Concat/Stripe
Size: 20962560 blocks (10.0 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase Reloc
d31 0 No No
d61 0 No No
d31: Soft Partition
Device: c1t2d0s3
State: Okay
Size: 10485760 blocks (5.0 GB)
Device Start Block Dbase Reloc
c1t2d0s3 0 No Yes
Extent Start Block Block count
0 1 10485760
d61: Soft Partition
Device: c1t3d0s3
State: Okay
Size: 10485760 blocks (5.0 GB)
Device Start Block Dbase Reloc
c1t3d0s3 0 No Yes
Extent Start Block Block count
0 1 10485760
d7: Concat/Stripe
Size: 25155072 blocks (11 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase Reloc
d23 0 No No
d53 0 No No
d23: Soft Partition
Device: c1t2d0s2
State: Okay
Size: 12582912 blocks (6.0 GB)
Device Start Block Dbase Reloc
c1t2d0s2 20352 No Yes
Extent Start Block Block count
0 79712133 12582912
d53: Soft Partition
Device: c1t3d0s2
State: Okay
Size: 12582912 blocks (6.0 GB)
Device Start Block Dbase Reloc
c1t3d0s2 20352 No Yes
Extent Start Block Block count
0 79712133 12582912
d6: Concat/Stripe
Size: 25155072 blocks (11 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase Reloc
d22 0 No No
d52 0 No No
d22: Soft Partition
Device: c1t2d0s2
State: Okay
Size: 12582912 blocks (6.0 GB)
Device Start Block Dbase Reloc
c1t2d0s2 20352 No Yes
Extent Start Block Block count
0 67129220 12582912
d52: Soft Partition
Device: c1t3d0s2
State: Okay
Size: 12582912 blocks (6.0 GB)
Device Start Block Dbase Reloc
c1t3d0s2 20352 No Yes
Extent Start Block Block count
0 67129220 12582912
d5: Concat/Stripe
Size: 41925120 blocks (19 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase Reloc
d21 0 No No
d51 0 No No
d21: Soft Partition
Device: c1t2d0s2
State: Okay
Size: 20971520 blocks (10 GB)
Device Start Block Dbase Reloc
c1t2d0s2 20352 No Yes
Extent Start Block Block count
0 46157699 20971520
d51: Soft Partition
Device: c1t3d0s2
State: Okay
Size: 20971520 blocks (10 GB)
Device Start Block Dbase Reloc
c1t3d0s2 20352 No Yes
Extent Start Block Block count
0 46157699 20971520
d3: Concat/Stripe
Size: 41925120 blocks (19 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase Reloc
d12 0 No No
d42 0 No No
d12: Soft Partition
Device: c1t2d0s0
State: Okay
Size: 20971520 blocks (10 GB)
Device Start Block Dbase Reloc
c1t2d0s0 20352 No Yes
Extent Start Block Block count
0 25186178 20971520
d42: Soft Partition
Device: c1t3d0s0
State: Okay
Size: 20971520 blocks (10 GB)
Device Start Block Dbase Reloc
c1t3d0s0 20352 No Yes
Extent Start Block Block count
0 25186178 20971520
d2: Concat/Stripe
Size: 50330496 blocks (23 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase Reloc
d11 0 No No
d41 0 No No
d11: Soft Partition
Device: c1t2d0s0
State: Okay
Size: 25165824 blocks (12 GB)
Device Start Block Dbase Reloc
c1t2d0s0 20352 No Yes
Extent Start Block Block count
0 20353 25165824
d41: Soft Partition
Device: c1t3d0s0
State: Okay
Size: 25165824 blocks (12 GB)
Device Start Block Dbase Reloc
c1t3d0s0 20352 No Yes
Extent Start Block Block count
0 20353 25165824
d4: Concat/Stripe
Size: 92255616 blocks (43 GB)
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase Reloc
d13 0 No No
d43 0 No No
d13: Soft Partition
Device: c1t2d0s1
State: Okay
Size: 46137344 blocks (22 GB)
Device Start Block Dbase Reloc
c1t2d0s1 0 No Yes
Extent Start Block Block count
0 1 46137344
d43: Soft Partition
Device: c1t3d0s1
State: Okay
Size: 46137344 blocks (22 GB)
Device Start Block Dbase Reloc
c1t3d0s1 0 No Yes
Extent Start Block Block count
0 1 46137344
Device Relocation Information:
Device Reloc Device ID
c1t2d0 Yes id1,sd@SSEAGATE_ST314670LSUN146G34425765____________3KS25765
c1t3d0 Yes id1,sd@SSEAGATE_ST314670LSUN146G344251AW____________3KS251AW
format command showing hard drive info:
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@0,0
1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@1,0
2. c1t2d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@1c,600000/scsi@2/sd@2,0
3. c1t3d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@1c,600000/scsi@2/sd@3,0
One question I have is, are these setup up as disk mirrowing? or just soft partitions? Which it seems to apply.
Also, I want to make sure that I am doing things in the right order after I install 10 on the server and recreate the metadevices:
Make a copy of the etc/vfstab and /etc/system files
Configure the database replicas
Create the metadevices
Create the partitions
Create my directories and mount the file systems
Hi,
I posted this subject a while back but am just now getting around to working on this server again.
I would like to know if I can just create a pool of soft partitions, and then create file systems on them without having to do any type of RAID.
Here is the format output of my drives:AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@0,0
1. CT <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@1,0
2. c1t2d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@2,0
3. c1t3d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@3,0
And here is the partition table for 0 and 1:
Specify disk (enter its number):0
partition> p
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 4120 20.00GB (4121/0/0) 41935296
1 swap wu 4122 - 7419 16.00GB (3298/0/0) 33560448
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 7420 - 7423 19.88MB (4/0/0) 40704
4 var wm 7424 - 9484 10.00GB (2061/0/0) 20972736
5 unassigned wm 9485 - 9488 19.88MB (4/0/0) 40704
6 unassigned wm 9489 - 9492 19.88MB (4/0/0) 40704
7 unassigned wm 9493 - 14086 22.29GB (4594/0/0) 46748544
Specify disk (enter its number):1
partition> p
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 4121 20.00GB (4122/0/0) 41945472
1 swap wu 4122 - 7419 16.00GB (3298/0/0) 33560448
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 7420 - 7422 14.91MB (3/0/0) 30528
4 var wm 7423 - 9483 10.00GB (2061/0/0) 20972736
5 unassigned wm 9484 - 9486 14.91MB (3/0/0) 30528
6 unassigned wm 9487 - 9489 14.91MB (3/0/0) 30528
7 unassigned wm 9490 - 14082 22.29GB ((4593/0/0) 46738368
Even though I have four drives, do I need to create replicas on all of them? Do I create the pool of soft partitions on slice 7 of these two drives? And then create my file systems on these partitions?
Thanks
I know that I have to create my database replicas.
Similar Messages
-
RAID-5 configuration and performance
Hi,
About three years ago, we had a disk drive fail so after the long delayed, repair, I reconfigured the data disk drives into one RAID-5 metadata drive:
$ cat /etc/lvm/md.cf
# metadevice configuration file
# do not hand edit
d45 -r c1t1d0s0 c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0 c1t9d0s0 c1t10d0s0 -k -i 256b
(256b -> 256 blocks or 128k bytes)
I went RAID-5 because I wanted the next disk failure to keep the application up until we could schedule a repair activity . . . not fail the application hard and make a crisis d'jour. But at the time, I was working fast and did not realize the '256b' was larger than the cache size of the existing disk drives, the smallest disk cache in the array is just over 105k bytes. Still the array built fine and works in our application. It is 'fast enough' until I try to load a backup . . . then it performs like a dog. It is the Oracle database restore that takes too long.
I suspect my large stripe/interlace size has cut the number of hardware cache buffers in half, from 64 to 32 and this would explain the poor restore performance. I am looking at alternatives now that 1TB USB drives are in the petty cash range but I work on a government contract and money is tight, which leads to these questions:
UFS blocksize is 8192 - is there a known, optimum RAID-5 "interlace" size that is an integer multiple of the UFS block size?
Larger blocksizes means longer data transfer times to and from cache but compared to rotational delays, this is modest. Is there a credible, RAID-5 performance model for random read/writes to a RAID-5 array that uses rotational delay, data transfer speed, and seek delays for an optimum solution?
Are there Solaris tools that might give us insights to disk-layer, SCSI commands being used? Something for SCSI like 'snoop' is for network traffic.
The disk drives appear to have an option to use the cache for read-modify-write instead of physically hitting the same track over and over again. Are there Solaris tools that would allow us to use basic level SCSI commands to reconfigure the disk drives for more intense cache operation during the restore and return to default performance during normal operation?
My current thinking is to take the system down for a series of benchmarks using a semi-log scale "stripe/interlace" of "n" multiples of 8192, the UFS blocksize:
1*8192 -> the smallest tested only if n=2-5 suggests n=2 might be faster than any others
2*8192 -> second test, matches some examples in the documentation
5*8192 -> first test (I have some smaller backups to use that should run within a day)
10*8192 -> third test, determines if there is any reason to go larger
13*8192 -> is the largest that would fit in the smallest disk drive, cache
Based upon these benchmarks, I would test the range between the two fastest to see if there is a multiple of 8192 that shows a performance advantage. However, these tests take time, measured in days. I'm OK with taking the down time but wanted to ask the community if anyone has a better plan or insights to share.
This is not a 'hair on fire' problem as I will schedule the RAID-5 benchmarks for late May. But I thought I'd ask the community first.
Thanks,
Bob Wilson
ps. This forum software seems to be at war with our government e-mail system. I will check back but you can also send a note to [email protected].
Solved, it turned out to be a setting in BIOS that I overlooked, drive is now in use. -
Unable to Initialize Volume Manager from a Configuration File
I'd like to reattach a D1000 to a rebuilt system. The array contains a raid 5 partition that was built with Solaris Volume Manager (Solaris 9). Since it is the same system all controller/target/slice ids have not changed. I was able to restore the Volume Manager configuration files (/etc/lvm) from a tape backup and followed the instructions provided in the Solaris Volume Manager Administration Guide: How to Initialize Solaris Volume Manager from a Configuration File <http://docs.sun.com/db/doc/816-4519/6manoju60?a=view>.
All of the state database replicas for this partition are contained on the disks within the array so I began by creating new database replicas on a local disk.
I then copied the /etc/md.cf file to /etc/md.tab
# more /etc/lvm/md.tab
# metadevice configuration file
# do not hand edit
d0 -r c1t10d0s0 c1t11d0s0 c1t12d0s0 c1t8d0s0 c1t9d0s0 c2t10d0s0 c2t11d0s0 c2t12d0s0 c2t8d0s0 c2t9d0s0 -k -i 32b -h hsp000
hsp000 c1t13d0s0 c2t13d0s0
I then tested the syntax of the md.tab file (this output is actually from my secomd attempt).
# /sbin/metainit -n -a
d0: RAID is setup
metainit: <hostname>: /etc/lvm/md.tab line 4: hsp000: hotspare pool is already setup
Not seeing any problems I then attempted to recreate the d0 volume, but it fails with the error below:
# /sbin/metainit -a
metainit: <hostname>: /etc/lvm/md.tab line 3: d0: devices were not RAIDed previously or are specified in the wrong order
metainit: <hostname>: /etc/lvm/md.tab line 4: hsp000: hotspare pool is already setup
Any suggestions on how to reinitialize this volume would be appreciated.
Thanks, DougYou have UserPrincipalName column heading in the csv file so this should be your cmdlet.
import-csv C:\temp\sharedMailboxCreationTest.csv | ForEach-Object {New-Mailbox -shared -Name $_.Name -Alias $_.Alias -OrganizationalUnit $_.OrganizationalUnit -UserPrincipalName $_.UserPrincipalName -Database $_.Database}
Blog |
Get Your Exchange Powershell Tip of the Day from here -
Metainit error - overlaps with device in metadevice state database
I have successfully mirrored 3 of 4 partitions on a new install but am having trouble with the last one. It is the swap partition. There are the usual steps I follow:
SWAP (slice 1):
1. metainit -f d11 1 1 c0t0d0s1
2. metainit d12 1 1 c0t8d0s1
3. metainit d10 -m d11
4. edit the /etc/vfstab
5. reboot
6. metattach d10 d12
After step #1, I get the following error:
metainit: tpssol2: c0t0d0s1: overlaps with device in metadevice state database
I check metastat and all the config files and don't see anything wrong.What platform is this? SPARC or X86 and OS version. This normally happens after a rebuild and you get 2 disk devices with the same ID.
#iostat -Ei
This will display your disks and IDs. If the match, you will need to do the following (this should applies for physical and virtual servers, but I have only tested it on VMware) in this example c1t0d0 and c1t1d0(secondary) are the disks with matching IDs.
#iostat -Ei
this shows 2 disks with the same ID
#cfgadm -al|grep c1t
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
#cfgadm -c unconfigure c1::dsk/c1t1d0
#cfgadm -al|grep c1t
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected unconfigured unknown
#iostat -Ei
this shows now only one disk
from within VMWare manager remove the secondary disk and add it back again!
#cfgadm -c configure c1::dsk/c1t1d0
#cfgadm -al|grep c1t
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
#iostat -Ei
this now showed a new disk with a unique disk ID.
#fdisk /dev/rdsk/c1t1d0p0
Y to the prompt to create Solaris 100% prompt
#prtvtoc /dev/rdsk/c1t0d0s2|fmthard -s - /dev/rdsk/c1t1d0s2
#metadb -af -c4 c1t0d0s7 c1t1d0s7
Success! You can now setup your mirroring.
Edited by: readlee on Sep 17, 2008 7:06 AM -
Metadevices entry in /etc/vfstab
Hi
Following metadevices are configured using Disksuite
bash-2.05b# metastat -p
d0 -m d10 d20 1
d10 1 1 c1t0d0s0
d20 1 1 c1t1d0s0
d1 -m d11 d21 1
d11 1 1 c1t0d0s1
d21 1 1 c1t1d0s1
d4 -m d14 d24 1 <- /export/home
d14 1 1 c1t0d0s4
d24 1 1 c1t1d0s4
and the /etc/vfstab looks like:
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c1t0d0s1 - - swap - no -
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no logging
#/dev/md/dsk/d4 /dev/md/rdsk/d4 /export/home ufs 1 no logging
/dev/dsk/c1t0d0s4 /dev/rdsk/c1t0d0s4 /export/home ufs 2 yes logging
swap - /tmp tmpfs - yes -
The root file system is mounted as metadevice
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no logging
But not /export/home.
I can not mount using metadevice e.g.
/dev/md/dsk/d4 /dev/md/rdsk/d4 /export/home ufs 1 no logging
The only way I can mount it is as disk device?
/dev/dsk/c1t0d0s4 /dev/rdsk/c1t0d0s4 /export/home ufs 2 yes logging
Any help appreciated
MSThanks Darren,
Just after installing of the operating system
$ df -t ufs
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/dsk/c1t0d0s0 5165838 3459816 1654364 68% /
/dev/dsk/c1t0d0s4 6198606 4232216 1904404 69% /export/home
$ prtvtoc /dev/rdsk/c1t0d0s2
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 10491456 10491455 /
1 3 01 10491456 2106432 12597887
2 5 00 0 143349312 143349311
4 8 00 12597888 12587712 25185599 /export/home
7 0 00 25185600 20352 25205951
Then after running number of metadb, metainit and metattach commands
metadb -a -f -c 2 c1t0d0s7 c1t1d0s7
bash-2.05b# metainit -f d10 1 1 c1t0d0s0
d10: Concat/Stripe is setup
bash-2.05b# metainit -f d14 1 1 c1t0d0s4
d14: Concat/Stripe is setup
bash-2.05b# metainit -f d11 1 1 c1t0d0s1
d11: Concat/Stripe is setup
bash-2.05b# metainit -f d20 1 1 c1t1d0s0
d20: Concat/Stripe is setup
bash-2.05b# metainit -f d21 1 1 c1t1d0s1
d21: Concat/Stripe is setup
bash-2.05b# metainit -f d24 1 1 c1t1d0s4
d24: Concat/Stripe is setup
bash-2.05b# metainit d0 -m d10
d0: Mirror is setup
bash-2.05b# metainit d1 -m d11
d1: Mirror is setup
bash-2.05b# metainit d4 -m d14
d4: Mirror is setup
bash-2.05b# metaroot d0
reboot
I end up with following metadevices configured
bash-2.05b# metastat -p
d0 -m d10 1
d10 1 1 c1t0d0s0
d1 -m d11 1
d11 1 1 c1t0d0s1
d4 -m d14 1
d14 1 1 c1t0d0s4
d20 1 1 c1t1d0s0
d21 1 1 c1t1d0s1
d24 1 1 c1t1d0s4
the /etc/vfstab after this last reboot was
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c1t0d0s1 - - swap - no -
/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no logging
no logging
/dev/dsk/c1t0d0s4 /dev/rdsk/c1t0d0s4 /export/home ufs 2 yes logging
swap - /tmp tmpfs - yes -
Note that / file system is mounted on d0 metadevice and /export/home is still on disk device ???
Now if I edit and change c1t0d0s4 entry with d4 and reboot the node, the /export/home file system **does not get mounted**
If I try to mount /dev/md/dsk/d4 metadevice manually by running munt /export/home nothing happened, /export/home FS does not get mounted.
I tried to find the error messages but they are not in messges file? where else should I look?
TIA -
Airport can no longer read or write the configuration of Time Capsule
I have a MacBook Pro running OSX 10.8.3 and maintained with all available patches. I have also a Time Capsule with version 7.6.3 of the firmware. I use AirPort 6.2. So everything seems to be updated with the latest versions.
This has really been a good setup for nearly a year now, but earlier this month Time Machine suddenly stopped to work and could no longer do backups to the Time Capsule. I have tried to factory reset the Time Capsule several times, but I still get problems when writing the configuration to the Time Capsule. I get an error message saying "An error occurred while updating the configuration".
Airport is furthermore not able to detect the Time Capsule correctly anymore, so I have to configure it by entering the IP address. But after setting up WLAN, disks, etc. and enhanching the security, I just receive the error message when I try to write the config. The Internet connection works perfectly anyway, both via cable and wireless.
Anyone got any tips?Do the setup by ethernet in full isolation from the network.
Start from a full factory reset.
I would recommend you take the firmware back to 7.6.1 or even earlier if the TC is older than 12months. 7.5.2 was very reliable. All these bugs started with 7.6 and the change to Lion.
I would also recommend installing 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
Error while Provisioning a user to Exchange:Configuration OIM 9.1 & JBOSS
Hi,
I am facing the below error while provisioning a user to Exchange. The Resource gets provisioned. But inside the resource, two tasks (Create User & Set Mailbox) are rejected. When i retry these tasks, the Resource status is set to Revoked in the Resource Profile of OIM. The AD Provisioning is working fine. There are 2 AD IT Resources here. Database is Oracle 10g.
Error:
2012-03-02 15:06:10,347 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[xlWebApp]] action: LogonAction: User 'RWFLORENCIO' logged on in session 8B825B2D391A654D975CDC91FECB5E8E
2012-03-02 15:06:34,712 INFO [STDOUT] Running GETFULLNAME
2012-03-02 15:06:34,712 INFO [STDOUT] Target Class = gitidm.LogProfileUser
2012-03-02 15:06:34,721 INFO [STDOUT] Running GETMANAGER
2012-03-02 15:06:34,721 INFO [STDOUT] Target Class = gitidm.LogProfileUser
2012-03-02 15:07:00,233 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavri15-1iti
2012-03-02 15:07:00,233 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:07:00,233 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:07:55,208 INFO [STDOUT] Running IDMVALIDATION
2012-03-02 15:07:55,208 INFO [STDOUT] Target Class = gitidm.CustomApproval
2012-03-02 15:07:55,267 INFO [STDOUT] select USR_MANAGER_KEY from USR where USR_UDF_EMP_NO='540087'
2012-03-02 15:07:55,267 INFO [STDOUT] result : OK
2012-03-02 15:07:55,559 INFO [STDOUT] Running GETKEY
2012-03-02 15:07:55,559 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:07:55,559 INFO [STDOUT] Running GETIH1
2012-03-02 15:07:55,559 INFO [STDOUT] Target Class = gitidm.CustomApproval
2012-03-02 15:07:55,614 INFO [STDOUT] select USR_MANAGER_KEY from USR where USR_UDF_EMP_NO='540087'
2012-03-02 15:08:00,207 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavssb3-1itk
2012-03-02 15:08:00,207 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:08:00,207 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:08:16,901 INFO [STDOUT] Masuk exception
2012-03-02 15:08:16,988 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,000 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,016 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,030 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,046 DEBUG [org.jboss.ejb.StatelessSessionContainer] Useless invocation of remove() for stateless session bean
2012-03-02 15:08:17,304 INFO [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[xlWebApp]] action: LogonAction: User 'XELSYSADM' logged on in session 8B825B2D391A654D975CDC91FECB5E8E
2012-03-02 15:09:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavu2lc-1itr
2012-03-02 15:09:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:09:00,193 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:09:16,525 INFO [STDOUT] Running TOLOWERCASE
2012-03-02 15:09:16,526 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:09:16,642 INFO [STDOUT] Running TOLOWERCASE
2012-03-02 15:09:16,643 INFO [STDOUT] Target Class = java.lang.String
2012-03-02 15:09:17,139 INFO [STDOUT] Running CHECKCHILDOBJECT
2012-03-02 15:09:17,139 INFO [STDOUT] Target Class = gitidm.CheckEmptyChild
2012-03-02 15:09:17,217 INFO [STDOUT] Connected to IAM
2012-03-02 15:09:17,218 INFO [STDOUT] Query : select * from UD_EMAILOF join obi on obi.obi_key=UD_EMAILOF.obi_key join UD_MAILFOC on UD_MAILFOC.UD_EMAILOF_KEY=UD_EMAILOF.UD_EMAILOF_KEY where obi.req_key='44002'
2012-03-02 15:09:17,228 INFO [STDOUT] Total record : 1
2012-03-02 15:09:17,228 INFO [STDOUT] Is Admin not filled the child form ? FILLED
2012-03-02 15:09:17,231 INFO [STDOUT] Disconnected from IAM
2012-03-02 15:09:17,606 INFO [STDOUT] Running SETPROXYADDRESS
2012-03-02 15:09:17,607 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:17,622 INFO [STDOUT] SetProxyAddressForSubsidiary
2012-03-02 15:09:17,622 INFO [STDOUT] Running INSERTTOLOG
2012-03-02 15:09:17,623 INFO [STDOUT] Target Class = gitidm.LogProvisioning
2012-03-02 15:09:17,701 INFO [STDOUT] Query Log= insert into IDM_PROV_LOG values (sysdate,'Request for Email Account','RWFLORENCIO','rwflorencio','Set Proxy Address','FAILED','NO')
2012-03-02 15:09:18,870 INFO [STDOUT] Running CHANGEDOMAINUSER
2012-03-02 15:09:18,870 INFO [STDOUT] Target Class = adir.Provisioning
2012-03-02 15:09:18,945 INFO [STDOUT] Running GETDNUSERPLDT
2012-03-02 15:09:18,945 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:18,961 INFO [STDOUT] GetDN
2012-03-02 15:09:18,991 INFO [STDOUT] GETDN():CN=FLORENCIO\, Raul W.,OU=PLDT Non-Executives,OU=Test Area,DC=ISSecLAB,DC=NET
2012-03-02 15:09:18,991 INFO [STDOUT] Running ENABLEMAILBOXPLDT
2012-03-02 15:09:18,991 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:19,019 INFO [STDOUT] EnableMailbox
2012-03-02 15:09:19,020 INFO [STDOUT] user ssh ->Administrator
2012-03-02 15:09:50,426 INFO [STDOUT] error ->Could not connect for 30000 milliseconds
2012-03-02 15:09:51,428 INFO [STDOUT] Disconnected: 192.168.1.72. Press Enter to exit
2012-03-02 15:09:51,428 INFO [STDOUT] Running INSERTTOLOG
2012-03-02 15:09:51,428 INFO [STDOUT] Target Class = gitidm.LogProvisioning
2012-03-02 15:09:51,502 INFO [STDOUT] Query Log= insert into IDM_PROV_LOG values (sysdate,'Request for Email Account','RWFLORENCIO','rwflorencio','Enable Mailbox','FAILED','Could not connect for 30000 milliseconds')
2012-03-02 15:09:53,940 INFO [STDOUT] Running SETMAILBOX
2012-03-02 15:09:53,940 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:09:53,959 INFO [STDOUT] userssh ->Administrator
2012-03-02 15:09:53,959 INFO [STDOUT] userid ->ISSECLAB\Administrator
2012-03-02 15:10:00,461 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavvd3h-1itu
2012-03-02 15:10:00,462 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:10:00,462 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:10:00,577 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavvd6p-1itv
2012-03-02 15:10:00,577 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:10:00,578 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:10:00,865 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:10:00,865 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:10:07,034 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:10:25,353 INFO [STDOUT] Could not connect for 30000 milliseconds
2012-03-02 15:10:26,357 INFO [STDOUT] Disconnected: 192.168.1.72. Press Enter to exit
2012-03-02 15:11:00,222 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavwn7i-1itx
2012-03-02 15:11:00,223 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:11:00,223 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:11:51,773 DEBUG [org.jboss.resource.connectionmanager.IdleRemover] run: IdleRemover notifying pools, interval: 450000
2012-03-02 15:12:00,219 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavxxi3-1itz
2012-03-02 15:12:00,220 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:12:00,220 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:13:00,229 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzavz7t1-1iu2
2012-03-02 15:13:00,229 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:13:00,229 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:14:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw0i2o-1iu5
2012-03-02 15:14:00,192 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:14:00,193 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:14:02,974 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,974 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:02,975 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,473 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,473 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:14:53,474 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:00,249 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw1sex-1iu7
2012-03-02 15:15:00,249 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:15:00,249 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:15:00,591 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:15:00,592 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:15:00,727 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw1ss0-1iu9
2012-03-02 15:15:00,727 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:15:00,728 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:15:06,711 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:15:18,066 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,075 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,075 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,076 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:15:18,076 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,220 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw32os-1iub
2012-03-02 15:16:00,221 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:16:00,221 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:16:00,536 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,537 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,537 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,538 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:16:00,539 WARN [XELLERATE.WEBAPP] TimeZone is not set for the browser's machine.
2012-03-02 15:17:00,200 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw4cyw-1iud
2012-03-02 15:17:00,200 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:17:00,201 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:18:00,209 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw5n9t-1iuf
2012-03-02 15:18:00,210 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:18:00,210 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:19:00,211 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw6xkj-1iuh
2012-03-02 15:19:00,212 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:19:00,212 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:19:21,833 DEBUG [org.jboss.resource.connectionmanager.IdleRemover] run: IdleRemover notifying pools, interval: 450000
2012-03-02 15:20:00,500 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw8838-1iuk
2012-03-02 15:20:00,501 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:20:00,501 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:20:00,673 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw8881-1iul
2012-03-02 15:20:00,674 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:20:00,674 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:20:00,930 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation info user
2012-03-02 15:20:00,931 INFO [ADAPTER.AUTH_AD] Start initiate reconciliation
2012-03-02 15:20:07,489 INFO [STDOUT] select usr.usr_key,usr.usr_password from usr left join GIT_AUTH_AD on GIT_AUTH_AD.usr_key=usr.usr_key where usr.usr_password != GIT_AUTH_AD.USR_PASSWORD
2012-03-02 15:21:00,306 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzaw9i8g-1iun
2012-03-02 15:21:00,306 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:21:00,306 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:22:00,281 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzawasih-1iup
2012-03-02 15:22:00,282 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:22:00,282 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:23:00,303 DEBUG [org.jboss.ejb.StatefulSessionContainer] Created new session ID: gzawc2tl-1iur
2012-03-02 15:23:00,304 DEBUG [org.jboss.ejb.StatefulSessionContainer] Using create method for session: public void com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-03-02 15:23:00,304 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session: stateful-unified-invoker
2012-03-02 15:23:27,310 INFO [STDOUT] Running CHANGEDOMAINUSER
2012-03-02 15:23:27,312 INFO [STDOUT] Target Class = adir.Provisioning
2012-03-02 15:23:27,413 INFO [STDOUT] Running GETDNUSERPLDT
2012-03-02 15:23:27,414 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:23:27,432 INFO [STDOUT] GetDN
2012-03-02 15:23:27,473 INFO [STDOUT] GETDN():CN=FLORENCIO\, Raul W.,OU=PLDT Non-Executives,OU=Test Area,DC=ISSecLAB,DC=NET
2012-03-02 15:23:27,473 INFO [STDOUT] Running ENABLEMAILBOXPLDT
2012-03-02 15:23:27,474 INFO [STDOUT] Target Class = email.Provisioning
2012-03-02 15:23:27,495 INFO [STDOUT] EnableMailbox
2012-03-02 15:23:27,496 INFO [STDOUT] user ssh ->Administrator
2012-03-02 15:23:55,851 WARN [org.jboss.tm.TransactionImpl] Transaction TransactionImpl:XidImpl[FormatId=257, GlobalId=oim1.isseclab.net/5544083, BranchQual=, localId=5544083] timed out. status=STATUS_ACTIVE
2012-03-02 15:23:55,874 WARN [XELLERATE.DATABASE] Trying to get the connection count : 0
2012-03-02 15:23:55,875 WARN [XELLERATE.DATABASE] Trying to get the connection count : 1
2012-03-02 15:23:55,876 WARN [XELLERATE.DATABASE] Trying to get the connection count : 2
2012-03-02 15:23:55,877 WARN [XELLERATE.DATABASE] Trying to get the connection count : 3
2012-03-02 15:23:55,878 WARN [XELLERATE.DATABASE] Trying to get the connection count : 4
2012-03-02 15:23:55,878 ERROR [XELLERATE.DATABASE] Class/Method: DirectDB/getConnection encounter some problems: Error while retrieving database connection.Please check for the follwoing
Database srever is running.
Datasource configuration settings are correct.
2012-03-02 15:23:55,878 ERROR [XELLERATE.DATABASE] Class/Method: tcDataBase/readPartialStatement encounter some problems: Got a null connection
java.sql.SQLException: Got a null connection
at com.thortech.xl.dataaccess.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataobj.tcDataBase.readPartialStatement(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.cache.CacheUtil.getSetCachedQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.insertImplementation(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.attestTask(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beansimpl.AttestationOperationsBean.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beans.AttestationOperationsSession.updateResponses(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1129.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy744.updateResponses(Unknown Source)
at Thor.API.Operations.AttestationOperationsClient.updateResponses(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1128.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy785.updateResponses(Unknown Source)
at com.thortech.xl.schedule.tasks.tcTskSubmitAttestationRequets.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-03-02 15:23:55,885 ERROR [XELLERATE.SERVER] Class/Method: tcDataObj/eventPreInsert encounter some problems: Data Access Error
com.thortech.xl.dataaccess.tcDataSetException: Data Access Error
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
at com.thortech.xl.cache.CacheUtil.getSetCachedQuery(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.insertImplementation(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.attestTask(Unknown Source)
at com.thortech.xl.attestation.AttestationEngine.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beansimpl.AttestationOperationsBean.updateResponses(Unknown Source)
at com.thortech.xl.ejb.beans.AttestationOperationsSession.updateResponses(Unknown Source)
at sun.reflect.GeneratedMethodAccessor1129.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
Please help as its really urgent!Hey guys! 2 days and no replies yet. please help me with this.
-
Configuring requirement : ordered item to absorb cost of free goods
Hello Friends,
I need to configure this in SAP SD.
The main item should accumulate the cost of the free goods.
I have set the cumulative indicator and deactivated pring for this item.
Do i still need to configure the stock value for the free goods as cost free item? Or is this step only applicable for
another scenario, like,
If I were to activate Pricing such that free goods is displayed as subitem and VPRS configured as cost and discount set to 100%
1. Set Item category to TANN using FREE usage AND
2. use condition type RL00 with requirement 55.
3. use pricing type B.
regards
RaviRead this SAP help at http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm and the topic Free Goods in Sales and Distribution Processing for details.
Also go through each step of the configuration of the path at SPRO->Sales and distribution->basic functions->free goods.
Regards, -
Partner application configuration is missing error on SSO login page
We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly, of course!) then the APEX application is shown. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on Metalink or anywhere else on the Internet. Any ideas? I'm concerned that we have a misconfiguration somewhere that is causing this error and will affect any other partner application we setup in the future.
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup on both infra and mid tiers.Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application. -
SharePoint Foundation 2013 - Search Configuration Issue - 2 App Servers and 2 Front-End Servers
Hi,
We have a SharePoint Foundation 2013 with SP1 Environment.
In that, we have 2 Front-End Servers and 2 App Servers. In the Front-End Servers, the Search Service is stopped and is in Disabled state and in the 2 App Servers in One App Server, Search is Online and in another Search is Starting but goes to Stopped sooon
after.
Originally, we had only 1 App Server and we were running our Search Service and Search Service Application in that. Now since the index location became full and we were unable to increase the drive there, we added one more App Server and now the issue is
Search is not properly getting configured in either of these App servers. What we want to do is run Search only in the new App Server, because we have a lot of storage space for Index locations here, but in the older App Server, not run Search at all. We
tried keeping the Search Service disabled and ran the below PowerShell Scripts, but none of the ones are working. These scripts are creating the Search Service Application, but the error of "Admin Component is not Online", "Could not connect
to the machine hosting SharePoint 2013 admin component" is coming up.
http://www.funwithsharepoint.com/provision-search-for-sharepoint-foundation-2013-using-powershell-with-clean-db-names/
http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
http://blog.ciaops.com/2012/12/search-service-on-foundation-2013.html
Can I get some help please?
Karthick SHi Karthick,
For your issue, could you provide the
detail error message of ULS log to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For troubleshooting your issue, you can try to run the SharePoint Products Configuration Wizard on your WFE servers and run the script for configuring the search service on SharePoint
Foundation:
[string]$farmAcct = "DOMAIN\service_Account"
[string]$serviceAppName = "Search Service Application"
Function WriteLine
Write-Host -ForegroundColor White "--------------------------------------------------------------"
Function ActivateAndConfigureSearchService
Try
# Based on this script : http://blog.falchionconsulting.com/index.php/2013/02/provisioning-search-on-sharepoint-2013-foundation-using-powershell/
Write-Host -ForegroundColor White " --> Configure the SharePoint Foundation Search Service -", $env:computername
Start-SPEnterpriseSearchServiceInstance $env:computername
Start-SPEnterpriseSearchQueryAndSiteSettingsServiceInstance $env:computername
$appPool = Get-SPManagedAccount -Identity $farmAcct
New-SPServiceApplicationPool -Name SeachApplication_AppPool -Account $appPool -Verbose
$saAppPool = Get-SPServiceApplicationPool -Identity SeachApplication_AppPool
$svcPool = $saAppPool
$adminPool = $saAppPool
$searchServiceInstance = Get-SPEnterpriseSearchServiceInstance $env:computername
$searchService = $searchServiceInstance.Service
$bindings = @("InvokeMethod", "NonPublic", "Instance")
$types = @([string],
[Type],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool])
$values = @($serviceAppName,
[Microsoft.Office.Server.Search.Administration.SearchServiceApplication],
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$svcPool,
[Microsoft.SharePoint.Administration.SPIisWebServiceApplicationPool]$adminPool)
$methodInfo = $searchService.GetType().GetMethod("CreateApplicationWithDefaultTopology", $bindings, $null, $types, $null)
$searchServiceApp = $methodInfo.Invoke($searchService, $values)
$searchProxy = New-SPEnterpriseSearchServiceApplicationProxy -Name "$serviceAppName - Proxy" -SearchApplication $searchServiceApp
$searchServiceApp.Provision()
catch [system.exception]
Write-Host -ForegroundColor Yellow " ->> Activate And Configure Search Service caught a system exception"
Write-Host -ForegroundColor Red "Exception Message:", $_.Exception.ToString()
finally
WriteLine
ActivateAndConfigureSearchService
Reference:
https://sharepointpsscripts.codeplex.com/releases/view/112556
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Eric Tao
TechNet Community Support -
Problem when we created the managed server to configure different ports.
I am trying to configure different ports for admin console and my communication service as we can’t share admin port to the outside world.
So that only admin can access admin console using admin port.
And out side clients can access my webapplication using different port.
For this i have created the managed server in weblogic.and I deployed the application on managed server.
Now admin server is running on 8001 port and my Communication Service application is running on 7001 port.
But when I tried to configure MBeans related to myCommunicationServiceApplication those were disapper on admin console. And the other wlng services are appearing on admin console.
1. Since my application deployed on managed server MBeans registration happened from myapplication hence it’s disappear on admin console.
Now If I want to configure Mbeans (related to my communication service) how can I configure it?
2. My communication service using configurationStore module and other wlng services.
When I tried to start my application on managed server I got the below error:
<Apr 28, 2009 12:22:44 PM IST> <Error> <Deployer> <BEA-149231> <dscp11166.TechMahindra.com> <Unable to set the activation state to true for the application 'wlng_nt_qualcomm_active_mediation [Version=1.0]'.
com.bea.wlcp.wlng.api.storage.configuration.ConfigurationException: Configuration store module is not available.
3. I tried to target all wlngResources to manged server by editing config.xml file.
Then all wlng services disappears on admin console. If this is the case how can I configure container/account services on wlng?
I have created the Basicweblogic domain.
Below is the config.xml for reference.
"QualcommServer" is managed server name.
Can any one please suggest me how to configure this kind of scenarios?
<server>
<name>AdminServer</name>
<machine>new_Machine_1</machine>
<listen-port>8001</listen-port>
<default-iiop-user>weblogic</default-iiop-user>
<default-iiop-password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</default-iiop-password-encrypted>
<listen-address>localhost</listen-address>
</server>
<server>
<name>QualcommServer</name>
<machine>new_Machine_1</machine>
<listen-address>localhost</listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<java-home>C:\Program Files\Java\jdk1.6.0</java-home>
<class-path>C:\bea\wlng400\server\lib\weblogic.jar;C:\bea\wlng_pds400\lib\wlng\wlng.jar</class-path>
<bea-home>C:\bea</bea-home>
<username>weblogic</username>
<password-encrypted>{3DES}W8nBdoJPRZ8TkwcXwAZoxA==</password-encrypted>
</server-start>
</server>
<embedded-ldap>
<name>managedserver</name>
<credential-encrypted>{3DES}9q80YuFJueVVJxoWduJA1OGhbqk14EpgQWWyTrzlmxo=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.0.1.0</configuration-version>
<app-deployment>
<name>wlng_nt_session#4.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_nt_session.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>interceptors</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/interceptors.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_prm</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>C:\bea\wlng400/applications/wlng_prm.ear</source-path>
<security-dd-model>CustomRolesAndPolicies</security-dd-model>
</app-deployment>
<app-deployment>
<name>wlng_nt_qualcomm_active_mediation#1.0</name>
<target>QualcommServer</target>
<module-type>ear</module-type>
<source-path>servers\AdminServer\upload\wlng_nt_qualcomm_active_mediation.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>new_Machine_1</name>
<node-manager>
<name>new_Machine_1</name>
<listen-address>localhost</listen-address>
</node-manager>
</machine>
<jms-server>
<name>JMSServer-AdminServer</name>
<target>AdminServer</target>
</jms-server>
<jms-system-resource>
<name>WLNGJMSResource</name>
<target>QualcommServer</target>
<descriptor-file-name>jms/wlng-jms.xml</descriptor-file-name>
</jms-system-resource>
<custom-resource>
<name>networktier</name>
<target>AdminServer</target>
<descriptor-file-name>custom/nt.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngTierResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngTierBean</descriptor-bean-class>
</custom-resource>
<custom-resource>
<name>wlng-edr</name>
<target>AdminServer</target>
<descriptor-file-name>custom/wlng-edr.xml</descriptor-file-name>
<resource-class>com.bea.wlcp.wlng.management.descriptor.resource.WlngEdrResource</resource-class>
<descriptor-bean-class>com.bea.wlcp.wlng.management.descriptor.bean.WlngEdrBean</descriptor-bean-class>
</custom-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>wlng.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>wlng.localTX.datasource</name>
<target>QualcommServer</target>
<descriptor-file-name>jdbc/wlng-localTX-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
Thanks,
Srinu Babu PDear Nariharan,
Today I faced a simlar issue, and this SAP Note helped me fix it: 1966807 - Duplication of AET table records in change processing
In my case, cardinality of AET table was 1:1, and I was getting duplicate PARENT_ID every time when trying to create a subsequent service request for my activity.
Regards,
Andrew -
I am trying to configure two WRV200 from 2 different loca...
I am trying to configure two WRV200 from 2 different location and ADSL
accounts. One location has PPPoE and the other has PPPoA. Both of it are
having a Speedtouch 356 6V modem. The router which using PPPoE and having a DDNS from TZO.com has no problem with the Quick VPN but the router which using a PPPoA connection could not able to connect even the quick VPN.
There is an option to ridirect the Public IP of Speedtouch to other network device and I manage to configure it and now my router who is having a PPPoA connection has a Public IP. But still the same problem VPN still not working.
Is there any chance that I could make this router work with the PPPoA connection. I will really appreciate if somebody could help me with this problem.Sorry for making you confuse. Here is the VPN log details of the 2 routers.
Router 1:
000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 5s; rekey_fuzz: 100%; keyingtries: 5
000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+PFS+UP+AGGRESSIVE; prio: 24,24; interface: eth0; 000 "TunnelA": dpd: action:hold; delay:30; timeout:120;
000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
000 #12: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 9s; nodpd
000 #12: pending Phase 2 for "TunnelA" replacing #0
Router 2:
000 "TunnelA": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "TunnelA": ike_life: 28800s; ipsec_life: 3600s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 3
000 "TunnelA": policy: PSK+ENCRYPT+TUNNEL+UP+AGGRESSIVE; prio: 24,24; interface: ppp0;
000 "TunnelA": dpd: action:restart; delay:30; timeout:120;
000 "TunnelA": newest ISAKMP SA: #0; newest IPsec SA: #0;
000 "TunnelA": IKE algorithms wanted: 5_000-1-2, flags=strict
000 "TunnelA": IKE algorithms found: 5_192-1_096-2,
000 "TunnelA": ESP algorithms wanted: 3_000-1, flags=strict
000 "TunnelA": ESP algorithms loaded: 3_000-1, flags=strict
000 #3: "TunnelA":500 STATE_AGGR_I1 (sent AI1, expecting AR1); EVENT_RETRANSMIT in 8s; nodpd
000 #3: pending Phase 2 for "TunnelA" replacing #0
Hope this could help you. -
Dear Friends,
I have 2 queries -
1. Can we configured the Payment Terms which will enable while invoicing to create the multiple line item while Invoice Posting ( accounting entry ) say, while doing MIRO / FB60 transaction. And one of those would go to Special GL. e.g. we have to deduct the Retention Money @ 5% from Invoice Amount and we are using one of Special GL for Retention money so can i configure the Payment Term as -
1. 95% -
60 Days
2. 5% -
365 Days
So here 2 ( 5% ) will be posted as Special GL item while Invoice Entry.
( Currently we are transferring those entries to special gl manually using T code - F-02 from Vendor Open items )
2. We have configured the number of Payment Terms but sometimes negotiated Terms does fall into the category of existing Payment Terms and it is not possible to create the Payment Terms for such requirement. So can we configure one Payment Term which will be editable while Purchase ORder Creation or Invoicing ( like payment term with "OTHERS" would be created and initially it would be configured for 0 Days and those would be edited while making Purchase Order as per requirement.
Since this is affecting our Ageing Analysis and Payment Due Report as both are based on Payment Terms in PO.
If anyone has solution pls suggest the way to do it . will assign full marks if gets solution.
Thanks in advance.
PSHi
I think we can't maintain cash discounts more than two %.
Goto OBB8, choose account type customer/vendor.
goto payment terms segment. 1) 3% days 0 2) 2% days 15.
3) we can enter %, only days. it means no cash discount.
Regards,
Chandra -
How to configure oracle listener profile for multiple oracle database
Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
AlexHi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter -
How to Configure Cisco ASA 5512 for multiple public IP interfaces
Hi
I have a new ASA 5512 that I would like to configure for multiple public IP support. My problem may be basic but I am an occasional router admin and don't touch this stuff enough to retain everything I have learned.
Here is my concept. We have a very basic network setup using three different ISPs that are currently running with cheap routers for internet access. We use these networks to open up access for Sales to demo different products that use a lot of bandwidth (why we have three)
I wanted to use the 5512 to consolidate the ISPs so we are using one router to manage the connections. I have installed an add on license that allows multiple outside interfaces along with a number of other features.
Outside Networks (I've changed the IPs for security purposes)
Outside1 E 0/0 : 74.55.55.210 255.255.255.240 gateway 74.55.55.222
Outside2 E 0/2: 50.241.134.220 255.255.248 gateway 50.241.134.222
Inside1 : E 0/1 192.168.255.1 255.255.248.0
Inside2 : E 0/3 172.16.255.1 255.255.248.0
My goal is to have Inside 1 route all internet traffic using Outside1 and Inside 2 to use Outside2. The problem is I can't seem to do this. I can get inside 1 to use outside 1 but Inside2 uses Outside 1 as well.
I tried adding static routes on Outside2 to have all 172.16.248.0/21 traffic use gateway 50.241.134.222 but that doesn't seem to work.
I can post my config up as needed. I am not well versed in Cisco CLI, I've been using the ASDM 7.1 app. My ASA 5512 is at 9.1.
Thanks in advance for the suggestions/helpI have been away for a while and am just getting caught up on some posts. so my apology for a delayed response.
I find the response very puzzling. It begins by proclaiming that to achieve the objective we must use Policy Based Routing. But then in the suggested configuration there is no PBR. What it gives us is two OSPF processes using one process for each of the public address ranges and with some strange distribute list which uses a route map. I am not clear what exactly it is that this should accomplish and do not see how it contributes to having one group of users use one specific ISP and the other group of users use the other ISP>
To the original poster
It seems to me that you have chosen the wrong device to implement the edge function of your network. The ASA is a good firewall and it does some routing things. But fundamentally it is not a router. And to achieve what you want were a group of users will use a specified ISP and the other group of users will use the other ISP you really need a router. You want to control outbound traffic based on the source of the traffic, and that is a classic situation where PBR is the ideal solution. But the ASA does not do PBR.
HTH
Rick
Maybe you are looking for
-
HT1694 How do I log off from my Hotmail account on my iPad.
I don't seem to be able to log out of my hotmail account on my iPad Air. any ideas?
-
Hi Dear Community, i am placing here a link, where flash player is not working [sketchy link removed] Thanks
-
QM: Transaction QA13 - Usage Decision
Good day. In QA13, after entering the Inspection Lot, you will see the characteristics tab. In the said tab, there's a table control that has a "Specifications" column in the table control. With these, I have two questions: (1) I would like to know
-
Prob: Creating Image in memory and printing "hello" on it, then saving it.
How can i create an Image instance in memory and then do a drawString "Hello" on it, then save it to disk. I'm not loading the image, i'm not displaying it onscreen.... It's all in memory. So i can't to createImage, like in an applet... or Window.cre
-
I get an error message– The backup disk image could not be mounted.