Configuring multiple chassis in MAX
I am looking for some help/documentation on how to configure two chassis in MAX?
Hi Abhay,
What chassis do you have and what version of MAX? There are a few documents you may find helpful:
Multi Combo Chassis Setup
Configuring a PXI-1010 or PXI-1011 in MAX
You can also look in the MAX Help under Installed Products»PXI»MAX Help for PXI»PXI System Configuration or
Installed Products»NI-DAQ»MAX Help for NI-DAQmx»Getting Started»SCXI Devices»SCXI Chassis
Happy Thanksgiving!
aNItaB
Applications Engineer
National Instruments
Digital Multimeters
Similar Messages
-
How do you configure multiple PXI 1011 chassis' in MAX?
I have two PXI 1011 chassis'. The first has the MXI-3 card hooked to a MXI-3 PC card through fiber. The second chassis has an 8176 controller and the 6052e GPIB card. Both chassis have multiple SCXI cards. The problem is the configuration in MAX. MAX 3 picks up the MXI-3 card and chassis with all the SCXI modules, but will not pick up the 8176 chassis. This 8176 is hooked to the PC through a CAT5 ethernet switch.I know there are problems with multiple chassis configuration, but I'm sure I'm just missing something here.
Hi,
So it sounds like you have two PXI systems that are not connected or related to each other, is that right? Since your PXI chassis connected via MXI-3 is working fine, we�ll take that out of the equation.
It sounds like you are trying to configure your PXI-8176 system as a Remote System through an Ethernet connection. Is your PXI-8176 running Windows (if so which version) or Real-Time (RT) operating system?
If you are running Windows XP on the PXI-8176 and also on your computer you can use XP Remote Desktop to control your PXI-8176 system through Ethernet (see the following link for information on that):
http://digital.ni.com/public.nsf/websearch/C074C33F4DE3FA5186256D3D007788DA?OpenDocument
Another option is to use Remote Device Access (RDA) to cont
rol your SCXI modules and DAQ board (6052E). RDA will only work with Traditional NI-DAQ, it is not supported in NI-DAQmx. I�ve included a couple of links for KB�s that have more information on RDA for you.
http://digital.ni.com/public.nsf/websearch/3a4d2f5f4354e53a862568c0006a8bc0?OpenDocument
http://digital.ni.com/public.nsf/websearch/5CC9792C6CD4A34C862565BC0072D5DF?OpenDocument
If you ordered your controller only with Real-Time on it you can use the following document to configure and troubleshoot your PXI-8176 RT system.
http://www.ni.com/support/install/install_configure_6.htm
I hope this helps you.
Regards,
Doug K.
National Instruments -
How do you configure multiple PXIe chassis to share Tclk synch with the 6672 timing module?
Hi,
I have two PXIe chassis, each with a number of digitizers (configured through NI-SCOPE). Each chassis has a PXIe 6672 timing module. I have downloaded the sample VI from:
http://zone.ni.com/devzone/cda/epd/p/id/5254
which deals with PXI chassis. My question is this: in the VIs at the above link (and in fact all VIs I've seen for using the 6672 for sharing triggers), the VI needs access to the resource identifiers for both Master and Slave timing modules, how do I access the (remote) slave resource identifier from the master chassis? I feel like I'm missing something obvious, but can I do this using just an ethernet connection, or do I need another module to enable the master chassis to view the devices on the slave chassis in MAX?
Thanks for any help you can provide,
CillianThose example VIs are written to be used when a single host PC is controlling multiple chassis so there is just one computer running the program. Since both of your chassis have their own controllers it will be necessary to run a program on each (one as master, the other as slave). You can modify the code from that example to create and Master and Slave VIs. For the Master you will call the VIs as specified in case 0 of the example; for the Slave you will call the VIs as specified in the default, 1 case of the example.
You will also want to send a signal from the Master to the Slave to let the Slave know that the clock is being generated. You could use TCP/IP or a PFI line to do this. The basic order of events should be as follows:
1. VI runs on Slave to configure it to accept a clock.
2. VI runs on Master to begin outputing the clock.
3. Master sends a signal to Slave to let it know that the clock is being generated.
4. Continue with the rest of your program.
Let me know if you have any questions about this.
Barron
Applications Engineering
National Instruments -
How to configure multiple IP-Adresses on one NIC in OVM
Hi guys,
we have some OVM Servers 2.2.1 installed. They all have three NICs in them (eth0-2). For eth0 and eth2 we need multiple IP-Adresses configured to work with our storage solution. The configuration should look like this:
eth0:0 - 192.168.31.x
eth0:1 - 192.168.33.x
eth1 - 192.168.0.x
eth2:0 - 192.168.32.x
eth2:1 - 192.168.34.x
I tried creating gonfig files ifcfg-eth0:0 in /etc/sysconfig/network-scripts with the following content
DEVICE=eth0:0
BOOTPROTO=static
ONBOOT=yes
NETMASK=255.255.255.0
IPADDR=192.168.31.3
TYPE=Ethernet
HWADDR=00:1b:21:06:f0:fa
But it does not work. Neither eth0:0 nore an additional xenbr is configured when i restart.
I can configure multiple ip addresses for xenbr0 by calling something like "ifconfig xenbr0 192.168.31.x". But these settings get lost as sonn as i reboot the server.
I have already searched google, forums and blogs for a solution but could not find one. I thought that this should be a pretty common task. In "normal" linux it is not an issue at all.
Has somebody any experience with a setup like this? I would really apreciate your help.
Thanks
MarekHi,
configuring IP aliasses seems to work the same way like configuring VLANs. You will have to configure the appropriate bridges at system startup manually.
E.g. this little script is what I use to configure VLANs and briges on my OVM:
#!/bin/bash
echo "Configuring VLANs and bridges\n"
echo "Configuring VLAN 24 on eth2"
vconfig add eth2 24
brctl addbr br2.24
brctl addif br2.24 eth2.24
ifconfig eth2.24 up
ifconfig br2.24 up
echo "Configuring VLAN 31 on eth2"
vconfig add eth2 31
brctl addbr br2.31
brctl addif br2.31 eth2.31
ifconfig eth2.31 up
ifconfig br2.31 up
This script is run at startup by init using this startup skript in /etc/init.d, which is what I think you're missing as you can already seem to bring up the needed IPs manually - you'd have to change the chkconfig accordingly, that is make sure that the config script gets startet after the network has been brought up, like this: # chkconfig: 2345 11 91
[root@oraclevm01 ~]# cat /etc/init.d/vlan-config
#! /bin/bash
# vlan-config configure VLANs
# chkconfig: 2345 11 89
# description: Configures VLANs at boot time before the \
# network is started.
### BEGIN INIT INFO
# Provides: $vlan
### END INIT INFO
# Source function library.
. /etc/init.d/functions
if [ ! -f /etc/vlan-config ]; then
exit 0
fi
# See how we were called.
case $1 in
start)
# configure vlans
/etc/vlan-config
echo $"Usage: $0 {start}"
exit 1
esac
exit 0
Hth,
budy
Edited by: budachst on Jun 29, 2011 8:11 AM -
How to configure multiple IP addresses on one NIC?
Hi,
I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
So any advice is well appreciated.
Thanks!
Regards,
Marek HubatkaYou should be able to do this by using "VLAN Groups".
http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces. -
How to configure multiple clusters on the same machine.
I am attempting to configure multiple clusters on the same set of machines. I have set the cluster name and multicase IP addresses to be different for each cluster. However I am still getting and error that states:
"This indicates that there are multiple clusters on this network attempting to use overlapping network configurations."
Is this not possible? If it is possible, is there some further way i need to tell the VMs they are part of different clusters?
Thanks,
JacobFYI: I'm using the wrong multicast IP above. 224.0.0.1 is reserved and something else should be used. See:
Re: UDP flood hosed my LAN? -
How to configure multiple listeners
Hi All,
I have installed 2 different Oracle instances on a single machine. I found that each oracle installation created its own Listener. I cant start both of the listeners at the same time. As a result, the respective applications cant talk to their corresponding database instances.
I could start only one listener for one database instance at any given point of time. Therefore, I am unable to use the other application.
Can any one please help me in configuring this appropriately so that both the applications can talk to their respective databases?
Waiting for your kind replies.
Regards,
SyedSyed Abdul Rahman wrote:
Hi All,
I have installed 2 different Oracle instances on a single machine. I found that each oracle installation created its own Listener. I cant start both of the listeners at the same time. As a result, the respective applications cant talk to their corresponding database instances.
I could start only one listener for one database instance at any given point of time. Therefore, I am unable to use the other application.
Can any one please help me in configuring this appropriately so that both the applications can talk to their respective databases?
Waiting for your kind replies.
Regards,
Syedit's better to configure a single listener . Configuring multiple listener will increased system resource usage. Multiple listener may be helpful in case of RAC .
--neeraj -
How to Configure Multiple Purchase Requisitions per Service Order
Hi experts!
Sorry if this is in the wrong spot, but I was wondering how I can configure multiple Purchase Requisitions to be created from a service or maintenance order (IW31) based on the control key (or if it's even possible).
What would be the pros and cons of doing this? We currently only have one PR being created for one order (a 1-to-1 relationship), however now with implementing external services, we want 2 or more PRs created based on the control key. Is the control key the best way to go, or should I be looking at a different deciding field?
Thanks in advance!
StephanieRaj,
Thank you so much for the information. That does help! However business requirements are now changing to have different Purchase Requisitions created for a single order in the following scenarios:
- New Purchase Req created for different operations (you explained how above, perfect!)
- Seperate Purchase Req created for non-stock items (your answer above seems to group service operations and non-stock into the same Purchase Req).
- New Purchase Req created if the order has already been released. (If the order's status is still at "Create", then the additional component can be appended to the existing Purchase Req. If the order's status is "Released", and a new component is added, a new Purchase Req is created).
As mentioned, you explained how to do the first requirement. Is there anyway SAP can handle the next two requirements using standard config and not customizing anything?
Thanks in advance!
Steph -
How to configure multiple dev environment in single IP
HI,
I have a WLS running on a Windows NT machine. I want to configure multiple partition/environment
in that single WLS so that each user will have their own partition/environment to
play around. Once they are happy with their EJBs then we shall move them to a testing
environment. Is that possible in WLS??. Can anyone please guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i want is that in a single ip i wanna
multiple development environment.Tom,
looks like you are specifying http protocol in
sky.framework.ejb.SkySessionBean.getInitialContext method.
Change it to t3 or, if the JNDI lookup is in the same JVM, don't specify
PROVIDER_URL. If you have to use http tunneling due to any reason , you have to
enable HTTP Tunneling in server to which initial context is created. It is
disabled by default in 60. You can do so via console. Please refer to
documentation , let me know if you need additional help.
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
Tom Purcell wrote:
Kevin,
You said that with 6.0 the following happens:
On the second server I get an error when I do
http://host:secondServerPort/index.html
Is this the error you get on the Admin Server:
<Feb 28, 2001 12:42:24 PM EST> <Info> <HTTPTunneling> <Login rejected with
code: 'Failed', reas
on: You are trying to use http tunneling
The server will not let you connect'>
<Feb 28, 2001 12:42:24 PM EST> <Error> <HTTP> <Problem dispatching servlet
request
weblogic.common.T3Exception: You are trying to use http tunneling
The server will not let you connect
at weblogic.socket.TunnelLogin.rejectConnection(TunnelLogin.java:87)
at weblogic.socket.TunnelLogin.service(TunnelLogin.java:59)
at
weblogic.servlet.internal.MuxableSocketHTTP.dispatch(MuxableSocketHTTP.java:
467)
at
weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:638)
at
weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
And on the Managed Server:
<Feb 28, 2001 12:42:24 PM EST> <Error> <ConnectionManager> <Could not
connect to: '0S:127.0.0.1
:[-1,7001,-1,-1,-1,-1,-1]'
java.net.ProtocolException: Tunneling result unspecified - is the HTTP
server at host: 'localho
st' and port: '7001' a WebLogic Server?
at
weblogic.rjvm.http.HTTPClientJVMConnection.handleNullResponse(HTTPClientJVMC
onnectio
n.java:152)
at
weblogic.rjvm.http.HTTPClientJVMConnection.connect(HTTPClientJVMConnection.j
ava:194)
at
weblogic.rjvm.http.HTTPClientJVMConnection.createConnection(HTTPClientJVMCon
nection.
java:98)
at weblogic.rjvm.Protocol.createConnection(Protocol.java:207)
at
weblogic.rjvm.ConnectionManager.findOrCreateConnection(ConnectionManager.jav
a:997)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:364)
at
weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:330)
at
weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:228)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:188)
at
weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:180)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:149)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:232)
at
weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFact
oryDelegate.java:174)
at
weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
ory.java
:123)
at
javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:668)
at
javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at
sky.framework.ejb.SkySessionBean.getInitialContext(SkySessionBean.java:112)
at
sky.framework.ejb.SkySessionBean.setSessionContext(SkySessionBean.java:94)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanImpl.setSessionCo
ntext(Sk
yReferenceSessionBeanImpl.java:87)
at
weblogic.ejb20.internal.StatelessEJBHome.createBean(StatelessEJBHome.java:22
9)
at
weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.jav
a:90)
at
weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:7
5)
at
weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:67)
at
weblogic.ejb20.internal.BaseEJBObject.preInvoke(BaseEJBObject.java:113)
at
weblogic.ejb20.internal.StatelessEJBObject.preInvoke(StatelessEJBObject.java
:55)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl.setDataSou
rce(SkyR
eferenceSessionBeanEOImpl.java:22)
at
sky.ejb.session.skyreferencesession.SkyReferenceSessionBeanEOImpl_WLSkel.inv
oke(SkyR
eferenceSessionBeanEOImpl_WLSkel.java:161)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:373)
at
weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java
:128)
at
weblogic.rmi.internal.BasicServerAdapter.invoke(BasicServerAdapter.java:237)
at
weblogic.rmi.internal.BasicRequestHandler.handleRequest(BasicRequestHandler.
java:103
at
weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:1
7)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Thanks,
Tom
<Feb 28, 2001 12:42:24 PM EST> <Info> <ConnectionManager> <Bootstrap unable
to get a: 'Protocol
: 'http'' connection to: 'localhost/127.0.0.1' on port: '7001'>
"Kevin Apte" <[email protected]> wrote in message
news:[email protected]...
This advice applies to WL5.1. I have been trying to configure a
multiinstance Weblogic with no success. I want multiple copies
of the sample petStore available for test by multiple users.
I think in 6.0
You would need to open an admin server
Open the configuration file for say PetStore.
Clone the petStore- call it petStore2. .
Create a copy of the startup script and modify it to start PetStore2.
After doing this only one config.xml is created for both servers.
I am able to start the first server and view the petStore application,
On the second server I get an error when I do
http://host:secondServerPort/index.html
How does one create multiple instances in WL6.0 using the console
or using a XML editor ?
Jesse E Tilly <[email protected]> wrote:
[This followup was posted to weblogic.developer.interest.management
and
a copy was sent to the cited author.]
In article <[email protected]>, [email protected]
says...
HI,
I have a WLS running on a Windows NT machine. I wantto configure multiple partition/environment
in that single WLS so that each user will have theirown partition/environment to
play around. Once they are happy with their EJBs thenwe shall move them to a testing
environment. Is that possible in WLS??. Can anyoneplease guide me to a good documentation
about this one.
Many Thanks
Vasan.
PS: I dont want a clustering technology all i wantis that in a single ip i wanna
multiple development environment.
NT isn't a multiuser environment. I will assume that
you mean some
Win32 box sitting in a room where people can copy their
classes/EJBs and
test their stuff. If this is the case, the setup is easy.
Create a directory and startup script for every developer.
Have a
global properties file in the same directory as the scripts
so that
common settings are, well, common. Tell each user to
modify the various
parts of the properties files in their directories to
deploy EJBs and
register servlets, etc etc.
In each startup script, you will have to specify the server
directory
and the binding port for each person. Pick a port (something
easy to
remember and high, like 30000, 30001, etc etc) for each
person. Why?
Well, when they connect to the app server, they'll know
they're hitting
only their server. Also, TCP/IP won't let more than one
JVM bind to the
same port, so if you want simultaneous instances (> 4
you better have
one kick ass Win32 box) you have to do this.
Hope this solves your problem.
JT
Senior Developer, HotelTools INC
[email protected] -
How to configure multiple domains in Active directory
HI,
How can I configure multiple domains on Active Directory. When I installed AD it asked for a domain name, there I gave ravigupta.com as domain name. But now I find no way of creating another domain.
I am a java developer and my task is to write a programme which returns all the domains available in LDAP server.
To start with ,I tried to create few domains in LDAP server ( AD ) but stuck up ,as i found there could exist only one domain.
Please tell me how to configure multiple domains in LDAP server ( Active Directory).
I skiped DNS configuration while AD installation.
-raviI'm sorry, but you should be asking on a different forum. This has nothing to do with Java.
-
How to configure multiple listeners to listen for the same instance.
Hello everyone,
I am running oracle database 11g and I want information regarding how to configure multiple listeners to listen for the same database instance. Actually I know how to configure more than one listener but the main thing that I am confused about is when we create listener.ora file, do we have to statically register the database instance with both the listeners or the instance will register itself with both the listeners.
According to my knowledge the instance will register with the listener specified by LOCAL_LISTENER parameter and we cannot have more than one value for this parameter.
Please only give detailed answers with example as I am tired of simple answers with details that I already know.Hello,
Yes, it can make sense to have several listener for one Oracle instance. For instance you may have one listener for the applications another listener for DBA administration tasks as well as one listener dedicated to dataguard broker. It is not possible to have several listeners listening on the same IP and Port.
By default the database try to automatically register to a listener on port 1521. To instruct the instance to register to a specifc list of listeners you can add in the init.ora the local_listener parameter with an alias definition:
i.e
local_listener=MY_SET_OFF_LISTENERS
in your tnsname.ora add an entry called:
MY_SET_OFF_LISTENERS_LOCAL= (ADDRESS_LIST=
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1530))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1531))
(ADRESS=(PROTOCOL=TCP)(HOST=myhostname)(PORT=1532))
In this sample your instance will register to three listeners listening on respectively port 1530, 1531 and 1532
If you want your clients can be balanced over the 3 listeners -
How to configure multiple smtp servers per domain
Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh -
How to configure multiple report servers in Oracle 10 G R2?
I want to configure multiple report servers with my application deployed on Oracle 10G R2. Since R2 does not support report server clustering, how can this be achieved without any change in the application?
Currently, the application is running with single report server.Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh -
How to configure multiple databases in single listener
Hi,
I want to configure upto 8 standby databases in a server. But I do not know how to configure multiple databases within the listener.
Also can I use the same port number for all the databases.
please give your suggestions.
thankyou
satyanagPlease check (http://download.oracle.com/docs/cd/B10501_01/network.920/a96580/toc.htm)
Jonathan Ferreira
http://oracle4dbas.blogspot.com -
FAcing problems in configuring multiple macs(imac and mac book) pro) on time capsule
FAcing problems in configuring multiple macs(imac and mac book)
You may find these links useful:
http://pondini.org/TM/Time_Capsule.html
http://pondini.org/TM/4.html
Ciao.
Maybe you are looking for
-
ABAP Dictionary type FLTP is not allowed for screen element
Hi Experts I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain. "ABAP Dictionary type FLTP is not allowed for screen element"
-
Vendor not intended when create SC using create limit item
Hi All, This is a challenging issue for all of us... SRM : 5.0 ECC : 6.0 I am facing the problem when creating the Shopping cart.. When i click on Centralized purchasing -- > Shop -- > Create Limit item and give the Desc, Product category, Value limi
-
Regarding Trading Partner assingment
Hello Experts, I am getting error regarding Monthly Rollup for consolidation. In .txt file, I am getting Account no. Trading partner movement code and amount but problem is that in that .txt file user is not getting getting right total amount as per
-
New In-app purchases not showing up in multi-issue Viewer
Hi all, We created a multi-issue Viewer and got that approved together with the first in-app purchase (folio). The app is free and downloadable from tehAppstore and the folio can be purchased from within the app as is to be expected. Last week howeve
-
I cant watch videos in youtube and i have everything updated
i cant see any videos in youtube and i have java flash player updated also my system is updated. two days ago was working perfect and i had to do a adove flash player update and i did it like i always i do but this time i cant watch videos on the int