Configuring multiple instances of weblogic server 7.0 on single machine
Hi,
I am trying to configure multiple instances of weblogic server 7.0 on single machine
( sun Solaris 7). I tried to create everytime new domain. Can anybody help me.
Thanks in advance.
Ravi
You can have several servers under one domain. No need to create a new
domain for each server. Just configure a server and make sure they are
listening on different ports. you are all set.
Kumar
ravikiran wrote:
Hi,
I am trying to configure multiple instances of weblogic server 7.0 on single machine
( sun Solaris 7). I tried to create everytime new domain. Can anybody help me.
Thanks in advance.
Ravi
Similar Messages
-
Multiple instance of WebLogic server 6.1 on port 80
Hi:
Is it possible to run two seperate instances of WebLogic server 6.1 on same the
server both listening on port 80?
Details about the instances:
Instance 1
Domain names : fasnets
Server name: envext
Listen Address : 155.x.x.1
Listen Port : 80 :
External DNS : www.acme.com
Instance 2
Domain names : fasnets1
Server name: envext1
Listen Address : 155.x.x.2
Listen Port : 80 :
External DNS : www.acme1.com
Thanks,
SoniHi Soni,
Web colsole --> your domain --> your server --> configuration -->
general --> Listen Port / Listen Address
Regards,
Slava Imeshev
"Soni " <[email protected]> wrote in message
news:3dcfbbcb$[email protected]..
>
Hi:
Is it possible to run two seperate instances of WebLogic server 6.1 onsame the
server both listening on port 80?
Details about the instances:
Instance 1
Domain names : fasnets
Server name: envext
Listen Address : 155.x.x.1
Listen Port : 80 :
External DNS : www.acme.com
Instance 2
Domain names : fasnets1
Server name: envext1
Listen Address : 155.x.x.2
Listen Port : 80 :
External DNS : www.acme1.com
Thanks,
Soni -
Multiple instances of weblogic server 6.1 running on the same machine
Hi,
I need to run two instances of weblogic server 6.1 running on the same
machine. I need one for development and the other one running the live
applications. I need two instances to be independent of each other. I am
running weblogic server as an NT service. So I need two servers to start
from the service so they are independent of each other.
Thanks
MadhuHi.
You can create new servers in your domain via the console. Be sure they are
listening to different ports, however. If your NT machine supports more than
1 IP address then you could alternatively bind each server to a different
address.
I'm not sure if this answers your question?
Regards,
Michael
m holur wrote:
Hi,
I need to run two instances of weblogic server 6.1 running on the same
machine. I need one for development and the other one running the live
applications. I need two instances to be independent of each other. I am
running weblogic server as an NT service. So I need two servers to start
from the service so they are independent of each other.
Thanks
Madhu--
Developer Relations Engineer
BEA Support -
Multiple instances of weblogic server 5.1 on one node.
Hi,
We failed to start one instance on a node where we were able to start
another instance from another location.
We installed two instances of Weblogic server 5.1 on Solaris 5.7.
One at /usr/weblogic and another at /opt/weblogic. We were able to start
the /usr/weblogic instance in cluster mode. Then we stopped
/usr/weblogic instance and try to start another instance at
/opt/weblogic in cluster mode. But failed. We have similar directory
structure and files in both places except the weblogic.properties file,
which has different paths.
we are using JDK1.2.2 and got the following Exception
Exception in thread "main" java.security.AccessControlException: access
denied (
java.lang.RuntimePermission createSecurityManager )
at
java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java, Compiled Code)
at
java.security.AccessController.checkPermission(AccessController.java,
Compiled Code)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java, Compi
led Code)
at java.lang.SecurityManager.<init>(SecurityManager.java,
Compiled Code)
at
weblogic.boot.ServerSecurityManager.<init>(ServerSecurityManager.java
, Compiled Code)
at weblogic.Server.main(Server.java, Compiled Code)
at weblogic.Server.main(Server.java, Compiled Code)
Any type of help or suggestion is appreciated.
Thanks
--sreeni.Hi.
You can create new servers in your domain via the console. Be sure they are
listening to different ports, however. If your NT machine supports more than
1 IP address then you could alternatively bind each server to a different
address.
I'm not sure if this answers your question?
Regards,
Michael
m holur wrote:
Hi,
I need to run two instances of weblogic server 6.1 running on the same
machine. I need one for development and the other one running the live
applications. I need two instances to be independent of each other. I am
running weblogic server as an NT service. So I need two servers to start
from the service so they are independent of each other.
Thanks
Madhu--
Developer Relations Engineer
BEA Support -
Running Multiple Server Instance in Weblogic Server
Hi
I am using Weblogic 5.1.0 with SP6. I am trying to run multiple server
instances
of Weblogic Server. The one that comes by default is "myServer".
My question is if i were to create multiple server instances, do i need to
copy the
weblogic.properties file in each of folder corresponding to respective
application
server instance. I am not using Clusters.
Also if i need to include some classes or jar files in my application server
instance
classpath, how do i do it. cuz in weblogic.properties file i didn't find any
property
corresponding to classpath.
The classpath i need to set is for my creating a JDBC pool for connectivity
to my
AS400 DB2 database using the Type 4 (AS400JDBCDriver) Driver. Is there some
other way to do it.
Thanks in advance
NiranjanThere is an answer on your first question at
weblogic.support.interest.clustering
I asked a similar question. Search for a message posted by me on 24/11/00
Rgds,
Mike
"Niranjan Soni" <[email protected]> wrote in message
news:[email protected]..
Hi
I am using Weblogic 5.1.0 with SP6. I am trying to run multiple server
instances
of Weblogic Server. The one that comes by default is "myServer".
My question is if i were to create multiple server instances, do i need to
copy the
weblogic.properties file in each of folder corresponding to respective
application
server instance. I am not using Clusters.
Also if i need to include some classes or jar files in my applicationserver
instance
classpath, how do i do it. cuz in weblogic.properties file i didn't findany
property
corresponding to classpath.
The classpath i need to set is for my creating a JDBC pool forconnectivity
to my
AS400 DB2 database using the Type 4 (AS400JDBCDriver) Driver. Is theresome
other way to do it.
Thanks in advance
Niranjan -
Running Multiple Instance of indesign server using com calls
Hello All,
I am new to this community , can anyone help me in understanding how can i run multiple instance of indesign server using com calls.. i am using jacob library in java for com calls ..
ThanksHi Soni,
Web colsole --> your domain --> your server --> configuration -->
general --> Listen Port / Listen Address
Regards,
Slava Imeshev
"Soni " <[email protected]> wrote in message
news:3dcfbbcb$[email protected]..
>
Hi:
Is it possible to run two seperate instances of WebLogic server 6.1 onsame the
server both listening on port 80?
Details about the instances:
Instance 1
Domain names : fasnets
Server name: envext
Listen Address : 155.x.x.1
Listen Port : 80 :
External DNS : www.acme.com
Instance 2
Domain names : fasnets1
Server name: envext1
Listen Address : 155.x.x.2
Listen Port : 80 :
External DNS : www.acme1.com
Thanks,
Soni -
Multiple instances of weblogic pointing to same public_html
Hi,
I am using Weblogic 5.1 and have successfully set it up to start multiple instances
of weblogic from one weblogic server(each instance has its own unique port).
Currently I have multiple instances of public_html (one for each instance). Does
anyone know what I have to do to point all instances of weblogic to a common public_html?
Many thanks in advance
Dipencreate a symbolic link that is called public_html that points to the common
docroot.
"Dipen" <[email protected]> wrote in message
news:3b7cf1bf$[email protected]..
>
Hi,
I am using Weblogic 5.1 and have successfully set it up to start multipleinstances
of weblogic from one weblogic server(each instance has its own uniqueport).
Currently I have multiple instances of public_html (one for eachinstance). Does
anyone know what I have to do to point all instances of weblogic to acommon public_html?
>
Many thanks in advance
Dipen -
Deploy multiple instances of WebLogic (null)
Dont' crosspost.
- Prasad
Rajashekar Narsina wrote:
> Hi,
>
> When I have multiple instances of weblogic, can I use weblogic.properties
> file for each instance of server.
>
> If so, what should I do for that,
> it is urgent, your help will be greatly appreciated.
>
> Raj
-
Install Multiple Instance of sql server
Hi guys,
I have one question. How can i install multiple instance in sql server ( I am using 180 days VHD to access sql server r2 standard edition). I am accessing sql server through Hyper-V Manager. Can anyone guide me please.
Regards,
JaganHello Jagan,
For each instance you have to run the SQL Server installer and assign a unique instance Name during Installation; for each instance the Installation procedure is the same.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Can policy agent protect multiple instances of app server
I created multiple instances of Sun ONE App server 7.0, and one web-app in each instance. But When I am installing Policy Agent 1.1 for the second instance of App server, it told me that I HAVE had it installed.
How can I protect multiple instances of App server?I see another thread on this subject. Thanks.
-
How to configure SSL for Oracle Weblogic Server
Hi,
Please help me to configure SSL in oracle weblogic server.
If possible, please provide step by step to configure SSL.this should help
http://weblogic-wonders.com/weblogic/2010/05/19/configuring-ssl-on-weblogic-server-custom-identity-custom-trust/ -
Multiple instances of messaging server, iMs 5.1
Hi,
Do you Know how to create a new message instance in iMS 5.1 on
a single machine? iPlanet documentation talk about it but I don't find the
instructions that explain how to do it.
Thank for help.
RegardsYou can create multiple domains in a single instance of messaging....
or multiple instance but with a cluster
"Oriol Rubies" wrote:
Hi,
Do you Know how to create a new message instance in iMS 5.1 on
a single machine? iPlanet documentation talk about it but I don't find the
instructions that explain how to do it.
Thank for help.
Regards--
/\ Hugo Brenes Hernandez
\\ \ Soporte y Servicio / Sun Microsystems - IPlanet
\ \\ / Lantech (Costa Rica)S.A.
/ \/ / / Costado Este de Periodico La Republica
/ / \//\ Barrio Tournon, San Jose
\//\ / / San Jose , Costa Rica
/ / /\ / Phone: (506) 295-8000 Ext 8071
/ \\ \ Fax: (506) 221-5105
\ \\ E-Mail: [email protected]
\/ -
Multiple document roots on one instance of weblogic server..
Hi,
Is it possible to configure multiple document roots for one weblogic server?
Here is my situation...
We have a sun box which is having 4 IP addresses. We would like to have a
document root for each IP address, but we want to run a SINGLE weblogic
server instance..
Any help is appriciated..
thxcheck this out for more info:
http://www.weblogic.com/docs51/admindocs/properties.html#multihoming
"Mauricio Del Moral" <[email protected]> wrote in message
news:3977759c$[email protected]..
Hi,!
I'm afraid not, but that would be great. -
How to configure multiple instances in CF9
I'm having a few issues with a couple of our staging servers that are running multiple instances of CF9, and I'm not sure if they're set up correctly. I have CF9 Enterprise multiserver installed and I created 4 additional instances using the Instance Manager. I also created a specific jvm for each one to use and reregistered each service to use the custom jvm. In Apache I added the following to each vhost (changing the serverstore and port):
<IfModule mod_jrun22.c>
JRunConfig Serverstore "C:/JRun4/lib/wsconfig/muffin/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51000
</IfModule>
However, when the service is stopped for one of the sites, instead of getting the JRun 500 error it will instead return a CF error or the site will still come up. But if I stop the main CF server service it will kill all the sites.
So it seems that all the instances are still tied to the main service. Is there something I'm missing here or something that wasn't configured correctly?
I used this guide when setting it all up. http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc4 .html
Thanks for any help.Thanks again for the help, I think we're getting closer
So I added all the instances to the wsconfig.properties file and they all show up when I run the wsconfig.exe.
#JRun/ColdFusion MX Web Server Configuration File
#Mon Mar 01 13:30:00 PST 2010
1=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
1.srv=cfusion,"cfusion"
1.cfmx=true,<null>
2=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
2.srv=cf2,"cf2"
2.cfmx=true,<null>
3=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
3.srv=cf3,"cf3"
3.cfmx=true,<null>
4=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
4.srv=cf4,"cf4"
4.cfmx=true,<null>
5=Apache,C:/Apache2.2/conf,"",C:\\Apache2.2\\bin\\httpd.exe,"",false
5.srv=cf5,"cf5"
5.cfmx=true,<null>
I also did this for each instance....since they were set to true.
Open the jrun_root/servers/servername/SERVER-INF/jrun.xml file for each server instance and locate the ProxyService service. Ensure that the deactivated element is set to false
But lets say I kill the service for cf2 and/or stop it in CF Admin from the Instance Manager, the site still stays up...
Here's a sample of my Apache configs.
httpd.conf
# JRun Settings
LoadModule jrun_module "C:/JRun4/lib/wsconfig/1/mod_jrun22.so"
<IfModule mod_jrun22.c>
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ignoresuffixmap false
JRunConfig Serverstore "C:/JRun4/lib/wsconfig/1/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51020
#JRunConfig Errorurl url <optionally redirect to this URL on errors>
#JRunConfig ProxyRetryInterval 600 <number of seconds to wait before trying to reconnect to unreachable clustered server>
#JRunConfig ConnectTimeout 15 <number of seconds to wait on a socket connect to a jrun server>
#JRunConfig RecvTimeout 300 <number of seconds to wait on a socket receive to a jrun server>
#JRunConfig SendTimeout 15 <number of seconds to wait on a socket send to a jrun server>
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
</IfModule>
httpd-vhosts.conf
<VirtualHost x.x.x.x:80>
DocumentRoot "C:/domains/cf2"
<IfModule mod_jrun22.c>
JRunConfig Verbose true
JRunConfig Serverstore "C:/JRun4/lib/wsconfig/2/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51000
</IfModule>
</VirtualHost>
<VirtualHost x.x.x.x:80>
DocumentRoot "C:/domains/cf3"
<IfModule mod_jrun22.c>
JRunConfig Verbose true
JRunConfig Serverstore "C:/JRun4/lib/wsconfig/3/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51002
</IfModule>
</VirtualHost>
I also noticed that in each jrunserver.store for every instance, all that's in there is "proxyservers=" Should there be anything else? -
Multiple instances of Weblogic on NT
Is is possible to run two instances of WebLogic on an NT server as
services? Specifically, I want to set up web server clustering on two
machines, but I am also going to be running another custom Weblogic
app that will access a backend database. I need to set up a separate
weblogic server for the database app outside of the clustering
weblogic webservers?
Thanks
Steveyes u can run multiple instance of the service.
There is a parameter in install.exe where you can specify the name of the
service and in this manner you can have as many services as you want
Chuck Karish wrote:
[email protected] wrote:
Is is possible to run two instances of WebLogic on an NT server as
services?No. The NT support programs aren't set up to handle the multiple
registry keys that would be needed, and they aren't set up to
allow for setting different names for the several services.
Specifically, I want to set up web server clustering on two
machines, but I am also going to be running another custom Weblogic
app that will access a backend database. I need to set up a separate
weblogic server for the database app outside of the clustering
weblogic webservers?
Thanks
Steve--
Chuck Karish BEA Systems
[email protected] San Francisco, CA
(415) 317-0182 (cell) (415) 364-4692
Maybe you are looking for
-
1st question, I bought 2 iPhone 4s's Dec 2011, unlimited plan which was up Dec 2013. April 19 2014, I bought 2 iPhones, 1 5c, 1 5s with the more of everything plan, which is not more of everything, it's far less then my old plan, but whatever. I got
-
Wrecked Connection PART 2 (the continuation)
Hi Guys, I will just add the relevent points ,if I miss any I know you will let me know Kindest becca Power-cycling networking equipment (in the right order) can often solve a lot of problems. Worth a try. -Rebooted my mini and router several times (
-
My apple stopped working, repowered, light comes on in front when you press remote buttom, nothing on TV
-
License Key installation - Error from database layer
when i am trying to install license key i am getting the following error message <b>"Error from database layer"</b> following are the values passed. SAP system = NSP Inst. Number = DEMOSYSTEM Hardware Kye = XXXXXX System Number = left balnk Expires o
-
Generate output values based on contexts
Queue 1 : contextchange mat_name1 contextchange mat_name2 contextchange mat_name3 contextchange mat_name4 contextchange Queue 2: ( output from Boolean AND) contextchange true contextchange true true contextchange true true true contextchange false tr