Configuring Netgear WLAN-Router with Safari not possible

Hi,
I've got a problem with safari and my netgear router WGT624v2. In a fromer safari version it was possible to configure the router via the config-page. But with my current safari version it is not possible. I can logon, but to only thing I coud see is cryptic HTML-Code. Firefox isn't able, too. The only browser which could manage this is MS Internet Explorer.
Maybe this has something to do with active x? Could a former safari version handle active x, and the current could not?
Does anybody have the same problem?
regards
Benni

Hi Benni and Welcome to Apple Discussions ...
Could be possible Microsoft isn't supporting Active X to the latest Safari update?? Try the Support and FAQ's at the Netgear site:http://kbserver.netgear.com/downloads_support.asp
Carolyn
Message was edited by: Carolyn Samit

Similar Messages

Bad display when configuring my Linsys router with Safari

Hi,
I have a Linksys router (WRT54G v1.1 firmware 4.20.7) that I configure with my browser.
When I use Safari all popup menu have a bad display, something like:
"Capture(share.auto)Auto"
While the same popup from Firefox will give me the result:
"Auto"
Only.
This was working well before, I can't remember if it was a router update or a Safari update that make the changes, but with Safari 1.x it was OK for sure.
Any way to reset it to the default behavior? What settings need to be change in Safari to get the right result?
The major problem is that display is confused and lines are longer than normal, so that mean the display is fuzzy...

I just sent a feedback to Apple, hoping they will find and solved the problem here...

ITunes Library set up on NetGear R6100 router with ReadyShare from USB port?

Can the iTunes Library be set up on a NetGear R6100 router with it's NetGear ReadyShare feature. from a USB thumb drive or USB hard drive attached to the one available R6100 router's USB 2.0 port?
I have read the Apple forum post about a similar question for the more advanced NetGear R7000 router, which says it can work there. Unlike some of the other sibling Netgear routers that do not have ReadyShare, my R6100 does, which leads me to believe that it should work, since its the same technology (they both have a router USB port with ReadyShare). It just appears that the documentation is very limited. The other post said to format the USB drive to the Apple format (HFS+), rather than Fat32, get the Mac or Apple to see the iTunes directory located on the router's USB port.
I'd like to know if anyone has had any luck using the ReadyShare.feature on their R6100 for sharing their iTunes library to the same iTunes account on different devices (laptop, PC, AppleTV, iPod, etc). My Apple TV has recently acquired a problem of not being able to detect the iTunes library on my PC, aftert a recent iTunes update, but that's another problem that the forums show a lot of people having. So I figured that since my R6100 router has the ability to share media over the network, I would try to move my iTunes library there, hopefully to make it easier to access by my Apple TV, and make it unnecessary to have my PC running when I watch my purchased iTunes movies, that are stored in that library. Interestingly, my movie and TV show files are stored in my iTunes Music folder under the "Movies" and "TV Shows" subdirectories (folders). The way it is set up now, if I'm watching a HD movie purchased from iTunes with my Apple TV, the movie stops playing as soon as my PC is shut down, which confirms to me that the large movie files are being pulled from there to my Apple TV.

Oh groan, not another conspiracy theory. No, it's a lot more likely Apple and Netgear and the dozens of other manufacturers haven't gotten together with the thousands users who have come up with hundreds of thousands of ways of rigging things up and tested each and every one of them. I am confident if Apple were out to mess things up for you they could have come up with something a lot more devious.
Did you do a web search for this? With a Google search specifying Netgear with this error I found:
ReadySHARE USB Hard drive access issue from a Mac Computer (Time Machine or iTunes not working properly)
- Able to see USB hard drive content but unable to write to USB hard drive connected to router's Readyshare port from Mac computer.
- Error that says "The iTunes application could not be opened. Unknown error 13008"
http://kb.netgear.com/app/answers/detail/a_id/22763/~/readyshare-usb-hard-drive- access-issue-from-a-mac-computer-%28time-machine-or
In fact it is almost certain that it is an issue of that particular model router and the drive formats it can use.

How apply cgi on Linksys router with safari

I'm having issues of setting preferences on a Linksys router with Safari and a Mac. Am I missing a setting on Safari to allow cgi?

I want to set how many users allowed on my small local network. I can use a different browser to accomplish this but would like to use Safari. From time to time I do maintenance on the router and need to access the router preferences. Also at this time trying to trouble shoot the router for not allowing PC's to show up on the network FInder, a completely different problem and off topic.

What's up with Safari not supporting United States Postal Service web actions since the update???

What's up with Safari not supporting the United States Postal Service web apps since the last update?

Exactly what web apps? Did you see them at the Mac App Store? Or can you post a link to where you saw them please.
Or are you talking about an iPhone or iPad with iOS?

How to configure Airport Express N router and Netgear G router with Extreme

I have a primary Netgear G router (WRT54G) connected to my cable modem box. I have an Airport Express N router streaming music in another room and also extending the wireless network.
I am planning to demote the Netgear router as a switch + wireless network extender connected to my home theater setup (dish+apple tv+ps3) and purchase a new dual band Airport Extreme connected to the cable box and acting as the main router.
My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G? That's the reason why I want the Extreme. If yes, how to go about doing it? If not, I will just buy a cheap switch and use that for the Home theater and leave the current setup alone. Anyone who has a similar network, please advice. Thanks!

My question is if its possible for the N devices to still use N network while the G devices not demoting the whole wireless network to G?
Yes. To do so, you would need to connect the Netgear to the new 802.11n AirPort Extreme Base Station (AEBSn) by Ethernet, and then, reconfigure it as a bridge (disable both its NAT & DHCP functions).
In this configuration, the AEBSn & AXn can provide the 802.11n network and the Netgear can provide the 802.11g network.

Using Netgear DG834PN router with Airport on Imac with Leopard 10.5.2

Hello,
I recently got an Imac (at christmas) and began connecting wirelessly using a belkin45g with a WEP key, which i have been told does not work correctly with macs.After this router kept disconnecting me, I then decided to change to a netgear dg834pn router, which connected fine at first.
I had to also set up a PC using Vista which connected perfectly, but after i had set up another WEP key for use with both computers, the PC connected perfectly, but the Imac refused to connect, giving me the error message "connection timeout".
I then removed the WEP, but now when i try and connect it still asks me for the WEP key. This was before i updated to 10.5.2, but i still have the same problem. I have to use an ethernet cable to successfully connect. It's a very annoying problem which has caused me to replace the router twice, but to no avail! If anyone has anything that can help me, it would be greatly appreciated.
Sorry if my explanation is confusing!!

Sorry for your frustrations, hopefully it's just a rinky-**** setting and not your router!
1st thing - while you have any connection, you should use Software Update to update to Leopard 10.5.2. if you haven't already done so.
2nd - If you goto Apple Menu > System Preferences > Network you will see a list of your Network "Services." If you are using PPPoE via your DSL Router, then all you need is Built-In Ethernet or Airport to obtain an DHCP IP Address. This sounds like your config right now and it works, but times out.
3rd - While in the Network preferences, I want to show you something: click on Built-in Ethernet once. Then, you will see an Advanced button in the lower-right corner. Click it. Now click the PPP tab and you will see settings. DO NOT change anything - I'm only showing you what I mean by, "Connect automatically when needed, etc." These type of settings should also correspond to your Router.
Translation: What you see here is sorta what you should see in your Router. Make sure your Router doesn't disconnect you after 3 hours, and make sure your connection is "Always On" etc.
Let me know if you keep getting sporatic drops after you attempted these minor things...

Configure a Cisco router with Username and Password.

Hello Guys,
Am quite new in cisco and i need to configure an 891 cisco router,can someone please show me step by step configuration commands for configuring Username and Secret Password.I would like the router to ask for "Username"and " Password" anytime i want to login the router through telnet.I also want to know if i have to erase the default configurations on the router first, before i start the configuration,and how it should be done in other not to loose the router whiles working on it.Thanks for your usual quick responds.
Regards,
Eben.

Hello Eben,
Peter has suggested to use SSH because of the fact that telnet data is sent in clear text, so someone with the right tools could easily find your password and your device could/would be compromised. It is security best practice. SSH is encrypted.
Technically speaking you do not need to change the hostname / domain name. But majority of Cisco documentation follow this method.
In case you are interested on how to do this without change... see below.
Router(config)#
Router(config)#crypto key generate rsa modulus 1024
% Please define a hostname other than Router.
Router(config)#crypto key generate rsa modulus 1024 label CISCO
The name for the keys will be: CISCO
% The key modulus size is 1024 bits
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]
Router(config)#
*Jul 11 13:27:51.431: %SSH-5-ENABLED: SSH 1.99 has been enabled
Router(config)#
The normal cases just as shown in Cisco documentation, the parser (without a label on the crypto key) would force us to change the hostname, create a domain name. I think the domain name is there to put a label on the keys.
Router(config)#crypto key generate rsa general-keys modulus 1024
% Please define a hostname other than Router.
Router(config)#crypto key generate rsa
% Please define a hostname other than Router.
Router(config)#hos
Router(config)#hostname ISR
lexnetISR(config)#crypto key generate rsa general-keys modulus 1024
% Please define a domain-name first.
ISR(config)#ip domain name net.com
ISR(config)#exit
ISR(config)#crypto key generate rsa general-keys modulus 1024
The name for the keys will be: ISR.net.com
% The key modulus size is 1024 bits
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]

Configure WRT54G Wireless Router with PUBLIC IP address and use DHCP for internal computers

Hi,I have an Internet online service with 5 public IP addresses. The router and the AP are connected to a switch. I would like to configure a WRT54G wireless router with one of this IP public Address and use DHCP (with private ip address) for the computers that will connect to the AP. As the AP is connected to the switch it is possible that other wired computers that are connected to the same switch can obtain an IP address from the DHCP ?
Thansk in advance

Thanks for your help. Please correct me if Im wrong. After connecte the equipments the way you suggestI setup a static IP address (The public IP) in the WRT54GI enable DHCP in the WRT54G with a range from 10.10.0.100 to 10.10.0.200 (as an example) The gateway is the Public IP address right ? How do I route the 10.10.0.x addresses to the public IP address. Thansk again

How do I use a netgear N600 router with Infinity 1

I have searched various forums etc. with mixed success so am hoping that someone here can give me an idiot's guide to connecting to the internet using my netgear N600 router rather than using the BT Homehub 5. BT say that I can do it (despite my router being set up for ADSL and the HH5 being set up for VDSL) but that they can't tell me how! They sent me an email with various details I would need but I can't see where most of them need to be added when I connect to the netgear set up wizard. What I could see I filled in but when I tried to connect the netgear genie told me the ADSL cable wasn't connected. Can anyone give me a step by step guide of what to do please? I would be very grateful. Thanks

nicolawatt wrote:
I just have the homehub 5 - I have seen various complicated descriptions elsewhere explaining how to use the HH5 as just a modem or how to just connect directly with the Netgear but all have been a bit over my head!
The HH5 cannot be used as a stand alone modem. You could use the Netgear as a simple wireless access point, but you would lose most of the functions, and would be better off using a proper wireless access point.
You cannot use the Netgear as a router, without a modem.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Remote session via RDGW fine with Windows - not possible with Mac ...?

Hi,
I've configured a fresh single RDS Server (all roles on one Server including Gateway) based on Windows Server 2012 R2. Everything works fine when we use Windows 7 with current RDP Client to connect via Gateway/HTTPS.
When we use a Mac (OS X 10.9.3) with current Version of "Microsoft Remote Desktop" (8.0.7), no RDP Connection is established. Error message: "Unable to connect to remote PC. Please verify ...". Login on <external.domain.name>/rdweb
works fine and I'm able to download the .rdp-file and open it with Microsoft Remote Desktop, but after a few seconds the error above appears.
I did some traffic analyzing on our Firewall and it seems that the Mac try to connect on port 3389 on the public ip of the RDS Server, which is blocked. I manually configured a RDP Connection with Gateway - same error. The log of Microsoft Remote Desktop:
[2014-May-22 11:58:30] RDP (0): Final rdp configuration used: gatewayhostname:s:<external.domain.name>
screen mode id:i:2
use multimon:i:1
session bpp:i:32
full address:s:<external.domain.name>
audiomode:i:0
username:s:
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com:1
redirectprinters:i:1
bookmarktype:i:3
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.<name>_RDS
[2014-May-22 11:58:30] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-22 11:58:30] RDP (0): lo0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-22 11:58:30] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-22 11:58:30] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-22 11:58:30] RDP (0): gif0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): stf0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): en0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): en0 af=30 (AF_INET6) addr=<address>%en0 netmask=ffff:ffff:ffff:ffff::
[2014-May-22 11:58:30] RDP (0): en0 af=2 (AF_INET) addr=<address> netmask=255.255.255.0
[2014-May-22 11:58:30] RDP (0): en0 af=2 (AF_INET) addr=<address> netmask=255.255.255.0
[2014-May-22 11:58:30] RDP (0): en1 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): fw0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): en2 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): bridge0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): p2p0 af=18 addr= netmask=
[2014-May-22 11:58:30] RDP (0): --- END INTERFACE LIST ---
[2014-May-22 11:58:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-22 11:58:30] RDP (0): client version: 8.0.24875
[2014-May-22 11:58:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-22 11:58:30] RDP (0): correlation id: 7a0a5e55-c35a-c642-882e-788a487a0000
[2014-May-22 11:58:30] RDP (0): Resolved '<external.domain.name>' to '<external ip address>' using NameResolveMethod_DNS(1)
[2014-May-22 11:58:38] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-22 11:58:38] RDP (0): ------ END ACTIVE CONNECTION ------
I remember that there was an issue to establish SSO based on DNS resolve (external Domain Name to internal ip address via Gateway Connection); but we resolved this with a new DNS Zone. But why is it fine on Windows, but not on Mac OS X with Microsoft
Remote Desktop? I wondering why the MRD is not using the Gateway Connection to resolve the RDP host ... ?
Many thanks,
Erik

And log from situation 1:
[2014-Jun-03 14:43:36] RDP (0): Final rdp configuration used: redirectcomports=0
disable themes=0
allow font smoothing=1
session bpp=32
negotiate security layer=1
disable wallpaper=0
full address=rds.something.com
rdgiskdcproxy=0
[email protected]
disable cursor setting=0
gatewayusagemethod=2
use redirection server name=1
compression=1
gatewayprofileusagemethod=1
keyboardhook=2
remoteapplicationmode=0
allow desktop composition=1
connection type=6
alternate full address=rds.something.com
drivestoredirect=*
gatewayhostname=gw.something.com
displayconnectionbar=1
networkautodetect=1
redirectposdevices=0
gatewaycredentialssource=0
screen mode id=2
bitmapcachepersistenable=1
disable full window drag=0
shell working directory=
workspace id=rds.something.com
redirectprinters=1
kdcproxyname=
redirectclipboard=1
use multimon=0
disable menu anims=0
prompt for credentials=0
authentication level=2
audiocapturemode=1
audiomode=0
autoreconnection enabled=1
enableworkspacereconnect=0
bandwidthautodetect=1
alternate shell=
videoplaybackmode=1
promptcredentialonce=1
redirectsmartcards=0
winposstr=0,3,0,0,800,600
devicestoredirect=*
loadbalanceinfo=tsv://MS Terminal Services Plugin.1.something
[2014-Jun-03 14:43:36] RDP (0): Final rdp configuration used: gatewayhostname:s:gw.something.com
screen mode id:i:2
use multimon:i:0
session bpp:i:32
full address:s:rds.something.com
audiomode:i:0
username:s:[email protected]
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com:1
redirectprinters:i:1
bookmarktype:i:3
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.something
[2014-Jun-03 14:43:36] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Jun-03 14:43:36] RDP (0): lo0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Jun-03 14:43:36] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-Jun-03 14:43:36] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-03 14:43:36] RDP (0): gif0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): stf0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): en0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): en0 af=30 (AF_INET6) addr=fe80::288:65ff:fe37:7788%en0 netmask=ffff:ffff:ffff:ffff::
[2014-Jun-03 14:43:36] RDP (0): en0 af=2 (AF_INET) addr=192.168.21.114 netmask=255.255.255.0
[2014-Jun-03 14:43:36] RDP (0): en4 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): bridge0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): p2p0 af=18 addr= netmask=
[2014-Jun-03 14:43:36] RDP (0): --- END INTERFACE LIST ---
[2014-Jun-03 14:43:36] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jun-03 14:43:36] RDP (0): client version: 8.0.24875
[2014-Jun-03 14:43:36] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Jun-03 14:43:36] RDP (0): correlation id: 9c3a9777-747c-704c-86d1-1ace1eef0000
[2014-Jun-03 14:43:36] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-03 14:43:36] RDP (0): ------ END ACTIVE CONNECTION ------
Seems to have disappeared "workspace id=" or is it all right?

Configure a Cisco router with telnet Username and Password.

Hello Guys,
Am quite new in cisco and i need to configure an 891 cisco router,can someone please show me step by step configuration commands for configuring Username and Secret Password.I would like the router to ask for "Username"and " Password" anytime i want to login the router through telnet.I also want to know if i have to erase the default configurations on the router first, before i start the configuration,and how it should be done in other not to loose the router whiles working on it.Thanks for your usual quick responds.
Regards,
Eben.

From this forum description:
Note: If your questions pertain to specific Cisco technology or solution, please post them in the proper community by leveraging the Community Directory so that folks who have expertise within those areas can engage and collaborate to it.
You should consider to delete your question here and recreate in in more appropriate forum. You can wish for quick response then ...
Edit: Thread has been moved by moderator, the notice no longer apply.

Problems with Safari not being able to access key sites such as BBC news yet Firefox gives immediate access

Does anyone else have a problem accessing key web sites using Safari? I am frustrated with Safari particularly as I can get Access immediately using Firefox

I regularly use cleanmymac
Which is a scam, but we can come back to that later.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. If there's no change, see below.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Cell (tower ID) with J2ME (not possible?)

Hi
I heard that it is just not possible to get cell tower ID, Network ID, etc through the J2ME framework.
Is that true? I know there is some implementation but that requires some sort of licence. Is there any open-source J2ME API that I am not aware of?
thanks a lot

You are right. I also discoverd that .NET has an implementation for this. Well, I hate to resort to .NET but have no choice.

Having issue with safari not starting when I open it. I am having this issue with iOS 7 on both a iPhone 4S and 5.

Have successfully updated 2 items and Safari the last both are having issues. Safari opens but then stalls. I have reset and restored the iPhone and I am seeing the same issues.

I just tested this on my wife's phone and you are right. I tested it time and again, changing the vibrate to ON and OFF and it consistently reproduces the problem, in line with the vibrate being on or off. You are a genius lol.
I had this issue on my phone too, but it disappeared when I followed the advice of a Genius.
When I asked my local Genius, he said it was a software issue and that a Restore followed by Create a new iPhone would remove the faulty/corrupted file that is causing the issue. He specified not to restore from backup, as the problem might still be resident within the backup.
I did this, and it seemed to work on her phone. Then it reappeared, so I'm still not sure what's going on. But your discovery defnitely holds true for her phone. My one seems to be okay regardless of the vibrate on or off now, even though I did exactly the same restore procedure on mine.

Configuring Netgear WLAN-Router with Safari not possible

Similar Messages

Maybe you are looking for