Configuring network connectivity for VM's on Hyper-V 2012 R2 Server

Hi,
We have installed Hyper-V server 2012 R2 on a server and trying to configure 10 VM's.
on the host machine we have 4 ethernet adpaters available ,for now we have enabled only one.
Questions :
1)Can we use only one adapter and configure all the VM's ?
-- if we use only one adapter for connecting all the VM's will there be any performance or connectivity issues ?
2) Do we need to configure virtual switches ?
Note :Users will access VM's using VPN connectivity .
What is the recommended one .Please suggest
Thanks

Thanks Bill for your replies.
Everything is working fine now. all the VM's are getting the IP addresses.
The "Allow management operating system to share this network adapter" was unchecked. We checked that and restarted the hyper-v server.
By default it is checked ,accidentally it might have been unchecked.
Everything is working fine now.
Thanks again for your inputs.

Similar Messages

DHCP Failover, one DHCP Server Partners Supnet is deactivated, Clients losing network connectivity for 3 sec. after renewing they IP Adress

Hello,
currently we are using two W2K12R2 DHCP server configured in "load balance Mode". On DHCP1 the IP-scope with failover partnership to DHCP2 is deactivated. DHCP2 is working fine. Now we register that 50 percent of our clients (W2K8R2 application
server) losing the network connectivity for 3 sec. after rereleasing they IP-Address. On DHCP2 servers eventlog we receive a lot of
BINDING ACK reject events 20291 and 20292 for these IP addresses entries.
These 3 sec. of loosing they Network connectivity is our big Problem because the Client application (W2K8R2 application server) cannot handle these timeout. It looks like a
DISCOVER-OFFER-REQUEST-NAK cycle that are described here:
http://blogs.technet.com/b/teamdhcp/archive/2014/02/26/dhcp-failover-patch-to-address-a-reservation-issue-and-another-issue-related-to-failover-partner-not-accepting-state-transition-from-bad-address-gt-active-has-been-released.aspx#pi47623=2
there is a solution to prevent the 3 sec network failure?
Rgds

Hi Steffen,
Have you applied KB2919355 in the server?
If issue persists, please check the detailed information about the event. It will tell us why does the server send the NAK.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Accept/Deny incoming network connection for apps already accepted/denied

i am constantly getting the dialog box to allow/deny incoming network connections for applications that i launch on my MBPro, even though these programs have already been allowed or denied. this causes multiple entries for the same applications in my firewall advanced list. each time i accept or deny, a new entry of the same program is added to the list. as an example, for Excel i have 5 entries - 2 that allow incoming connections, 3 that deny. the same goes for apps like itunes, word, nleac, and others.
if i delete these extra entries, they just get added to the next time i launch the program.
i've tried the remedy suggested by the macfixit forum (http://reviews.cnet.com/8301-13727_7-10330466-263.html) of deleting the firewall preference file "com.apple.alf.plist" and performing a disk permission under Safe Mode - didnt help.
looking for new suggestions. incidently, this wasnt always the case and other than upgrading to snow leopard, i cant specifically recall a change that started this problem.

i've been doing that for some time now, as this problem has been going on for months. even after i delete all of the programs that have multiple listings (and the key word there is ALL because basically every program that wants access has multiple listings here) the list gets re-populated the next/every time i launch that application. even if i later deny an application's request after accepting previously, they'll be multiple listings for that app - including listings to Allow and listings to Deny - for the the same app!!!

How to disable network connections for an application

Hi to all,
I would like to know if there is any way a user can disable network connections for a specific application.
Thank you,
Xwang

Yes, but I would like to block only a specific application, not all the traffic from the PC.
I've found this "solution" which uses iptables on the net:
"Add a group to your system (I use nonet myself), then add a rule to your output chain like this: -A OUTPUT -m owner --gid-owner nonet -j REJECT --reject-with icmp-net-unreachable Run the program for which you know in advance that you want to block, with sg (sg nonet "your_prog your_args")."
Do you think is it right?
Another suggestion was to use unshare to call the program disabling the net for that program only.
The problem is that unshare is runnable only by root so, in case, I should turn on its setuid flag in order to execute the program as a normal user, but I don't know if it is safe to do that.
Last edited by Xwang (2014-10-11 08:06:16)

Loss of network connectivity at random times to guests and now hosts Server 2012 R2 Hyper-v on Dell R620...Guests virtual disks reside on a NAS.

We have set up 2 Hyper-v environments (Server 2012 R2 fully updated) on Dell R620's. The guest machines are configured do that they reside on a NAS (also a Dell R620 with server 2012). We are having an issue on both the environments where the guests will
lose network connectivity. The servers ran well for about 4 weeks and recently the guests started having issues and we have even had to reboot the host due to network connectivity problems.
We have 4 virtual switches set up. 1 connected to its own NIC. 1 for management and the 3 others for guests.
The 3 for guests are not configured to allow host OS sharing.
We do not have IP addresses on the NICS for the guests. Only on the management port. (all 1 GB NICS)
We have updated the firmware and drivers for the standard Broadcom Netxtreme cards.
We do not have Jumbo frames enabled because of some issues with switching compatability.
I've seen articles recommending to turn off TCP offloading and to disable virtual machine queues. Is this best practice?
Any thoughts of where I might look to help diagnose this issue?

Hi ,
"1 connected to its own NIC. 1 for management and the 3 others for guests."
Also you mentioned that : " is only hosting these 24 VMs ".
First please try to disable the RSS in the property of the NICs for guests .
Then run powershell " Get-NetAdapterVMQ " to check the parameter "NumberOfReceiveQueues" (NumberOfReceiveQueues – The number of queues that the NIC has available to use and assign to VMs,
the host and a default queue) .
If I understand correctly ,when you enable VMQ the number of connected VMs on that NIC should not be more than the value of "NumberOfReceiveQueues" -2 .
For details please refer to following link:
http://blogs.technet.com/b/networking/archive/2013/09/10/vmq-deep-dive-1-of-3.aspx
Hope this helps
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Need help to Configure FTPS connection for File Sender Adapter

Hi,
I want to Configure, FTPS connection (Secured Connection) for File Sender Adapter. Could anyone please guide me, what Information I require to configure. I just want to know what Information should I request the team inorder the configure FTPS so that it can be deployed properly.
I have checked with [SAP Help Link|http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm] and while configuring the communication channel found that I need Keystore and the X.509 Certificate and Private Key. which needs to be deployed on the J2EE server by using the Visual Administrator.
Is there anything else, I need to configure.
Any help would be appreciated in this regard.
Thanks & Regards,
Varun.K

The basic things are Certificate/Keys which you already know. Usually it is enough for running a sceanrio.
However, if you have additional requirements, like FTPS for "Connection Security" for encryption, then you may need additional details like commands. Rest all settings are same as FTP.
Regards,
Prateek

Configuring RFC connections for load balancing.

Hi ,
We have the following landscape for our systems.
The database is installed on z/os , db2 (mainframe). The central services( SCS and ASCS) are also on the mainframe. So the message server is on mainframe.
The CI is on AIX and The DI is on AIX.
We have Logon groups configured and load balancing Configured and is RFC enabled.
1) When we connect to SAP using the SAPGUI and the portal connection is made to either CI or DI depending upon the best response times. Now recently we are running the mercury load testing, all the users are connecting to DI. Why are the users connecting to DI even though we have load balancing?
2) I have a system with SID BP0, with one CI and one DI. The logon group is BP0 and the message server name is cyrix. Now I have other another system EP0. I have created a RFC connection from EP0 to BP0. In SM59 I have selected the load balancing option, and provide the message server name, SID and logon group name. The connection does not work. If I connect directly to the CI or DI the connection works. Please tell me how can I configure load balancing for RFC connections.
Thanks
Manmath.

Dear 917996,
There are two types of load balancing:
- Client-side load balancing (setting up the tnsnames.ora on client side). More information here (http://ggsig.blogspot.co.uk/2012/04/client-side-
load-balancing-in-oracle.html). Very good video produced my friend Igor Melnikov is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/client/clientloadbalance_viewlet_swf.html)
-Server-side load balancing (remote_listener and setting service parameter clb_goal). Very good Igor Melnikov's video is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/server/serverloadbalance_viewlet_swf.html).
I have read about client side and server side load balancing. By editing tnsnames.ora I have enabled client side load balancing which is suppose to select listeners at random. then why does it only go to second node?Could you please show your tnsnames.ora on client?
Please can anyone help me to configure server side load balancing with SCAN. I have read many many post but couldn't find a clear answer.Based on your output (remote_listener string cmbtrnrac-scan:1521) you have already configured the server side load balancing.
SQL> show parameter listener
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=10.1
7.67.214)(PORT=1521))))
remote_listener string cmbtrnrac-scan:1521How many SCANs do you use? Do you use DNS?
regards,
Gennady

Keeps asking to accept incoming network connections for iTunes

Why does OS X keep asking if I want the new iTunes to accept incoming network connections on every iTunes launch?
1. It appears in the firewall, and is green lighted to accept incoming network connections.
2. I have the checkbox to automatically allow signed software to accept connections.
3. I have repaired permissions.
4. I have re-downloaded and reinstalled the application.
5. I am running the latest version of OS X with all updates installed.
This should not be happening.

I constanstly get the exact same nag message about allowing incomming connections, plus now iTunes just pops up all by itself, and I simply do not ever let anyone inside my firewall, period, including Apple, so they can spy on my info or software. The snooping scanel of the last couple of days has only underlined my decisions.
I have denied them access in security/advanced. I have turned off connect to apple for for song info. No Ping.
I do however run DLNA across my wifi network using BubbleUp client so I can access my iTunes library via TiVo throughout the house, and have for the last year with no issues.
(During this message, itunes has launched, nagged and started playing music all by itself 3 times!)
I tried a terminal command from another thread http://nerdramblings.tumblr.com/post/5637291886/fix-apple-firewall-asking-for-pe rmissions, which should have given me
/Applications/iTunes.app: valid on disk
/Applications/iTunes.app: satisfies its Designated Requirement
Insted I got this:
Last login: Mon Jun 10 22:06:31 on console
Buzzs-iMac:~ buzz$ codesign -vvv /Applications/iTunes.app
/Applications/iTunes.app: a sealed resource is missing or invalid
/Applications/iTunes.app/Contents/Resources/English.lproj/DevicePrefsMobileMe.ni b/objects.xib: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/ExactMatch.plist: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/arrow.png: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/artwork.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/AutofillMenus.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/AutofillMenusAlt1.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/AutofillSettings.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/border_bottom.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/border_bottomleft.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/border_bottomright.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/border_left.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/border_right.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/border_top.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/border_topleft.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/border_topright.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/BuyArrow.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/BuyMenuGift.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/customizing.9.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/customizing.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/DevicesMusic.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/DevicesMyiPod.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/DevicesShuffle.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/DevicesShuffle3g.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/EjectButtonSelected.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/fllscrn.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/geniusbutton.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/homebutton.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img1.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img10.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img11.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img16.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img19.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img2.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img20.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img22.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img23.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img24.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img25.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img26.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img27.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img6.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img7.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/img8.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/it_subtitles.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/itic.png: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/LibraryList.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/LibraryMusic.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/musictab.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/overview.9.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/overview.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/Playlists.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/PreviewButton.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/QuickLinksRedeem.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/rating.png: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/RentButton.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/repeat.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/ringtonebell.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/ringtonesui.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/rule.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/shuffle.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/smartplaylist9.0.3.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/smartplaylist9.1win.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/smartplaylistgear.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/speakerpopup.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreAllEpisodes.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/storearrow.png: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreList.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreMultiPass.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreNav.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreNavAudiobooks.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreNavCategories.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreNavMovies.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreNavPodcasts.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreNavSignIn.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreNavTVShows.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/StoreSeasonPass.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/SyncOptions.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/view.jpg: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/WishListMenu.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/xicnappletv.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/xicnipad.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/xicniphone.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/xicnipod.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/gfx/xicnitun.gif: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/iTunes Help.helpindex: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/iTunes Help.html: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/shrd/OpnApp.scpt: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/shrd/tree.js: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/2column_reference.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/3column_reference.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/annotated_topic_list.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/annotated_topic_list_images.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/genlist.html: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/genlist_style.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/home_iapps.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/index.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/launchpad.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/print.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/simple_topic_list.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/single_column_reference.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/task.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/sty/task_multi.css: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/iTunes Help/xpgs/xall.html: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/Localized.rsrc: resource added
/Applications/iTunes.app/Contents/Resources/English.lproj/SmartPlaylist.nib/obje cts.xib: resource added
/Applications/iTunes.app/Contents/Resources/iTunesASUHelper: resource added
/Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/_CodeSigna ture/CodeResources: resource added
/Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/Info.plist : resource added
/Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/MacOS/iTun esHelper: resource added
/Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/PkgInfo: resource added
/Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/Resources/ iTunesHelper.icns: resource added
/Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/version.pl ist: resource added
I have version of itunes 11.0.2 running in Snow Lep 10.6.8. and I run my iMac via wifi rather then ethernet, and have for 3 years. This is all new in the last 3 weeks. I'm happy with the version I have, with no interest in uninstall/reinstall or screwing around with the newest versions, which I really hate.
I'm ok poking around in Terminal if that's the answer. otherwise, I'm off to WinAmp or DoubleTwist, though I'm open to other suggestions as well.
Please excuse my angry tone, but I've had nothing but problems with this machine since I bought it, it's been to the shop once and reformmatted from scratch twice, and regard it as the second worst decision of my life. The worst one was my first marriage

When i try to sign onto I message I get the edit could not sign in. Please check yor network connection and try again. I have a network connect for the internet and i can access the internet

when i try to sign on to to I message I get the error message. IMESsage activation, could not sign in. Please check your network connection and try again. I have a network connection and can access the internet. what do i need to do?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Z1c Losing Network Connection for no Apparent Reason

Hi there, recently I noticed that after longer calls (ca 15+ minutes) my Z1c loses network connection ("No Signal" notification & empty triangle icon instead of signal bars) right after the call has been ended. I tried to turn on and off the airplane mode or to manually select the proper cellular network but these did not bring the signal back. The only thing that helps is restarting the phone (then I get full-strength signal). Just to be clear, I am not referring to a loss of mobile data connection as experienced by some users. What I see is a total loss of mobile network signal. In other words, when this occurs my phone is unreachable (people are not able to call or text me). In the Settings I have "WCDMA (preferred)/GSM". Changing this to "GSM only" is not an option for me because the 2G signal is quite weak and spotty in my area. Using "LTE (preferred)/..." is not an option either due to the lack of LTE coverage. (What can I say -- rural area... :/ ) Additionally, I have enabled the Stamina mode but I doubt this can be the culprit because the problem appeared also when I turned Stamina mode off for a day or so. I should also mention that I use A5.0 Lollipop; however, the problem started appearing only a couple of days ago (I never noticed any such issue with A4.4). Any help would be much appreciated. nvx

I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.

Itunes and network connection for remote speaker

I have three airport remotes that are all on line. On one of my computers when I try to access a remote speaker I get the message "network connection failed." I can play all three remotes from other computerswith ITunes but my main computer cannot access the remote speakers. Any suggestions? Thanks

I have the same problem with my computer running windows 7. I get the following error message; "unknown error -15000". The connection does not get established with my remote airport express access points

No network connection for S4

I've had no network connection with my S4 all day. No 3g or 4g or anything! I've already powered off/on, powered off then took out/replaced SIM card and powered back on. I've checked my network connections in settings. I don't know what else to do... frustrated.

Have you called Customer Service to see if there are network issues in your area?

Configure Synchronization Connections An error has occurred while accessing the SQL Server database

Hi,
i am getting following error message
Central Administration --> Synchronization Connections
An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
Central Administration --> Manage Profile Service: User Profile Service Application --> Manage User Properties
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 3bce5a11-f2dc-4788
Please tell how to fix it.
iffi

Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
for User profile page not display number of count in the page first check services , connection ,
IISRESET /NOFORCE / timer services restart
Deepesh Yevle MCTS

Hyper-v 2012 R2 server core recommendations for single server setup

Hi All,
Next weekend I will be installing a brand new Dell 720 server for a client of mine.
I would like to hear some recommendations on how to install this hypervisor.
Let me state that I have had some experience with virtualization technology in the past with VMWARE ESXi.
This is a small client with under 10 users but I have learned that with the 2012 product offering you cannot get Small Business Server any more. I know Microsoft has Windows server 2012 Essentials but you would have to have Exchange server in the cloud which
my client does not want. He wants to run his Exchange server in house.
Also he needs Remote Desktop Services (Terminal Server) because his accounting application requires it.
He has an existing Windows 2003 domain controller that eventually has to be decommissioned because it is too old and slow.
So I thought I install Hyper-v 2012 R2 core on the new server and then create 2 VMs:
1) Windows 2012 STD to run as a secondary domain controller.
2) Windows 2012 STD member server with Exchange server 2013 and Remote Desktop Services role.
My questions here are these:
1) Do I install the Hypervisor in workgroup or domain mode?
2) When I am finished with the old server do I transfer the AD FSMO roles onto the VM that is acting as a domain controller?
The new server has 2 CPUs. How does Microsoft licensing go here? I know that Windows 2012 STD gives me 2 instances with the same product key on the same server for 1 CPU. What happens if you have 2?
Can someone give me some insight on how to go about this? I remember that I found this easier with VMWARE Esxi.
Now with Hyper-V I need to also get a management workstation with Windows 8 professional on it to manage the Hyper-V core server.
Thanks and regards
Alfred

In regard to the VM's:
1.) DC: If you're going to be installing a second domain controller that is 2012 R2, you might consider reading this guide first.
http://msmvps.com/blogs/mweber/archive/2012/07/30/upgrading-an-active-directory-domain-from-windows-server-2003-or-windows-server-2003-r2-to-windows-server-2012.aspx
2.) Exchange: Here's the guide for installing Exchange 2013 on Server 2012. I don't believe R2 is supported yet for 2013.
http://social.technet.microsoft.com/wiki/contents/articles/14506.how-to-install-exchange-2013-on-windows-server-2012.aspx
3.) Host: You'd install the host in domain mode....but that point may be moot after you read #5.
4.) FSMO: I would verify the health of the 2012 DC before moving the roles. All too often I'll see a new DC get stood up, sysvol won't be published, the engineer will be in a rush to move the FSMO's, and things get a little sideways. Ultimately
you don't HAVE to move the FSMO's until you are ready to decommission the 2003 box.
5.) Licensing: No licensing rights convey with Hyper-V Core, so this may not be best for your scenario. See the queen mother of all Hyper-V licensing posts here -
http://www.aidanfinn.com/?p=13090
For what it's worth, plenty of SMB's are going to Office 365 to avoid the on-prem administration headache, but your client wants what your client wants. Sorry if this isn't the news you wanted but I hope it helps.

Unable to generate Pdf report for crystal 9/10 in Windows 2012 (Standard) server with Times New Roman font. With same font, report getting generated in excel, text, csv format in Windows 2012.

For Times New Roman font in Windows server 2012 R2 (Standard), crystal 9/10 report in pdf format is not getting generated. When we change the font for specific report like Arial, Calibri , Cambria then pdf report getting created.
In Windows 2008 R2, same application worked fine to generate pdf report for TimesNewRoman font and there is no change done in the application which is being used in Windows 2012 R2 server.

Ok, thanks for the reply. You need to contact support or a forum for the Crystal software. Third party products don't usually include Adobe technology, they have their own software. When you contact them, you may want to expand "unable to generate" to give any specific symptoms including any error messages.

Configuring network connectivity for VM's on Hyper-V 2012 R2 Server

Similar Messages

Maybe you are looking for