Configuring NPS (windows 2008 R2) for Wl 4400

Hi
We are using WL controller 4400, we failed to configure the NPS for the appliance. Can someone help us to configure the NPS for successful authentication? We tried to configure NPS with Windows 2008 R2 DC
Regards
LMS

Hi,
Unfortunately, the available information is not enough have a clear view of the occurred behavior. For narrow down the reason, could you provide more information about your environment. when this problem occurs the system log record information, screenshots
is the best information. I don't found the simlar issue, please try to reset the specific user password then monitor the issue again.
More information:
Event Logs
http://technet.microsoft.com/en-us/library/cc722404.aspx
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Slowness when connecting to RemoteApp configured in Windows 2008 R2 Server using RDP file

    Dear All,
    When connecting to a RemoteApp configured in Windows 2008 R2 with less privileged user it takes ~20 seconds to connect.
    Initial connection to
    application takes about 20-30 seconds and once loaded, subsequent RemoteApp connection takes
    2-3 seconds. i.e. if there is a disconnected session available in the server it connects quickly otherwise it takes long time.
    I am seeing this issue with Windows 2008 Server, when I connect to a Windows 2012 Server RemoteApp gets
    connected quickly. Also if I try with higher privileged user (like RemoteAdmin) connection is quick. The user I am trying is having lot of group policies set to limit user access to file system, desktop and registries.
    If I keep UAC settings to minimal level connection happens quickly(i.e. solves this issue). But I am
    not supposed to change the server UAC setting. It seems this has something to do with the list of group policies set for the user.
    Any suggestion to avoid this first time connection delay for less privileged users for connecting to RemoteApp (in Windows 2008 Server).
    Thanks
    Bachuu

    Hi Bachu,
    Thank you for posting in Windows Server Forum.
    First of all, if you are using RD Gateway serve then I would like you to
    uncheck the “Bypass RD Gateway server for local address” under RemoteApp Manager Checkbox and notify the result.
    Configure Remote Desktop Gateway Settings
    Also like you to update the RDP client version to RDP 8.1 and then check the result. In addition,
    I will suggest you to check that you have proper certificate in place. You can enable certificate revocation checking on RD Gateway client. Might due to this, you are facing issue. Please notify that you find any certificate related warning. Refer below article
    for information.
    How to Enable Certificate Revocation Checking on a Remote Desktop Gateway Client
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows 2008 R2 for WMI namespace "\root\cimv2"

    WMI __SystemSecurity class GetSecurityDescriptor method reports error 0x8004101d Unexpected error on Windows
    2008 R2 for WMI namespace "\root\cimv2"
    On Windows 2008 and Windows 2012 R2 GetSecurityDescriptor works fine.
    Thanks,
    Sandygg
    Dev

    Hi Anna,
    No event getting generated under Application / Security, but following event was reported under Microsoft-Windows-WMI-Activity/Operational
    log.
    Id = {01EAEC48-F800-0001-5A81-6ADB7E6CD001}; ClientMachine =
    sever2008r2; User
    = sever2008r2\user;
    ClientProcessId = 12580; Component = Unknown; Operation = Start IWbemServices::ExecMethod - root\cimv2 : __SystemSecurity::GetSecurityDescriptor; ResultCode = 0x8004101d; PossibleCause = Unknown
    Will let you about WMI Diagnosis tool result.
    Thanks,
    Sandy
    Dev

  • I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

    I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

    Hi all,
    Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
    I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
    When I compile using "javac" I get an error saying "javac" is not recognised.
    When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
    Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
    I have removed all previous references to java in the registry editor.
    Please help !
    Regards,
    Vipul

  • Cisco aironet 2600 series AP configuration with windows 2008 R2 Radius server.

    I want to know the configuration of Cisco aironet 2600 series AP with windows 2008 R2 Radius server.  
    I have
    1. AD & DHCP Server
    2. Cisco Aironet 2600 Access Point.
    I want to connect wifi devices through this AP. Authentication should be through Radius server and AD.

    Hi , 
    Below link should support your requirement 
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116584-configure-wirelesslan-00.html
    Minimal command : -
    AP(config)# aaa new-model
     AP(config)# radius-server host 172.20.0.1 auth-port 1645 acct-port 1645 key XXXXXX
     AP(config)# radius-server deadtime 10
    HTH
    Sandy

  • Multiple identical Windows 2008 Clusters for file sharing, how to create a failover, since DNS CNAME is not an option?

    Hello,
    We have multiple SAN devices that expose block storage to multiple Windows 2008 Storage Edition clusters, which consume them via iSCSI. To simplify, here is what we have:
    machine1+machine2 --> cluster --> storage1 (accessible via
    \\storage1.domain.name\shares)
    machine3+machine4 --> cluster --> storage2 (accessible via
    \\storage2.domain.name\shares)
    The 2 clusters have replication from active (storage1) to standby (storage2), so in theory they both include pretty much all the files.
    We have hundreds of applications that are pointing to \\storage1\shares. In case of a disaster, however, it is an immensely laborious task to change all the end-points from
    \\storage1\shares to \\storage2\shares, and then back. 
    I was trying to declare a CNAME (\\activestorage)  in our internal DNS, and point it to the
    currently active storage system. I tried both an alias and an IP pointing to the cluster. However, when I try to access
    \\activestorage\shares, I got an error that the network share does not exist. I have been reading about this,  and now I understand that CNAMEs are not possible in 2008 and only allowed in 2012 for this particular purpose.
    I also understand that I may have to register a CAP (Client Access Point) to create an "alias" for my storage. However, the CAP approach does not seem to address (or does it?) my initial problem - I am not looking to create an alias just for a
    particular storage cluster, but rather for the
    active storage cluster. This way, if disaster strikes, I can simply go and change an IP somewhere, and all the applications will starting using the standby storage system.
    I realize that there is an extra administration of ensuring that the two clusters are identical from shares perspective, and that's something we are already doing. All I need is a clue into how to make this architecture work in a less painful way.
    Thank you for your help,
    Isaac

    I think you got confused between DFS and DFS replication. The primary use of DFS is namespace virtualization. It also has additional components which aid in real time replication. You can opt to use only the name space virtualization and not the replication.
    The following link may provide some detailed information about DFS in 2008 R2. As I said.. You may not want to sue DFS Replicaiton, but DFS Namespaces is a perfect fit for your requirement (and very simple to implement)
    http://technet.microsoft.com/en-us/library/cc732006.aspx
    Regards Sivakarthi

  • Unable to install using the Windows 2008 Driver for Officejet Pro 8500A Premium

    I have been trying to figure out why I am unable to install the drivers from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109378-2&cc=us&dlc=en&lc=en...
    The site indicates that they are suitable for windows 2008 x64 but the install fails with the error below.

    Hi,
    Be sure to follow the steps below to install the printer on a Windows 2008 server, the installation should not be used as standard, but by customizing the installer using an Msiexe ccommand.:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03351547&cc=us&dlc=en&lc=en&product=4083971&tmp...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Window 2003 upgrade to window 2008 R2 for Moss 2007

    I am currently running Moss 2007 on window 2003 32 bit. I need to move it to 2008 r2 64bit. 
    currently 1sql, 1webapp
    i plan to add  64bit webapp(running window 2008 r2 64bit) to the farm, then remove the 32 bit webapp. here are my question
    is that an ok approach since msdn recommend remove sql server first?
    patch? does it have to be the same level? do i install 64 bit patches on win08 R2 or 32 bit? I am assuming 64 since i am running 64 bit window?
    what about custom web part, fab40? do i need to redeploy? 
    Anyone have step by step instruction? 

    Refer to the following MSDN article
    https://technet.microsoft.com/en-us/library/dd637753%28v=office.12%29.aspx?f=255&MSPPError=-2147217396
    Also refer to the following article on best approaches to upgrade.
    http://www.go4sharepoint.com/Forum/best-approach-upgrade-moss-2007-windows-22904.aspx
    And yes, you need to migrate your custom web part and fab40 template manually by redeploying.
    Cheers,

  • How to configure Sql Server 2008 R2 for debugging without disabling Windows Firewall?

    When I try to debug a procedure in Sql Server 2008 R2 I get a dialog box telling me to unblock some ports.
    >>
    The Windows Firewall on this machine is currently blocking remote debugging.  Remote debugging requiers that the debugger be allowed to receive informatino from the network.  Remote debugging also requires DCOM (TCP Port 135) and IPSEC (UDP 4500
    / UDP 500) be unblocked.
    <<
    I went to the Windows Firewall and added some new Inbound rules for each of the specified ports (in the images below.  But after this and rebooting entire computer -- I still get this dialog box when I want to go into debug mode from SSMS.  I can
    actually kind of debug standalone code in the SSMS window if I cancel the dialog box.  But I can't debug an actual stored procedure -- which is what I need to do.  I also noticed that my server has an IP address instead of LocalHost.  This is
    not a public Server -- it's my private development machine which is on a peer to peer network (with one other workstation), but I don't need that workstation to be able to access this server..  Would localholst make a difference for debugging?  How
    should I configure the sql server?  The firewall?
    Rich P

    Use PRINT and SELECT for debugging. That's what I do. I used to play with the debugger in SQL 2000 and older days, but I realised that I spent more time on getting it to work that I gained from using it.
    I thought about that.  I guess that IS the way to go.  Very well.  Thank you for the suggestion.   Although, when the debugger does work in the regular window (not a stored proc because it doesn't work there) the debugger IS nice. 
    For debugging my proc I am thinking I will insert param vals into a test collection table for now.  One obscure error I am getting with a particular proc -- in a When loop on one parameter I get the "value will be truncated" error -- but everything
    is set to accept 1000 characters and none of the source data even comes close to 1000 characters.  I have isolated at what point the error occurs and which section of data where the error is occurring but I have not isolated the cause of the error. 
    I cannot reproduce the error when I run the procedure by hand in a regular query window with the exact same code.  The error only occurs when the code is run in the stored proc.
    Rich P

  • Issue with VPN configuration in Windows 2008 r2 and 2012 Servers.

    Hello ,
    I hope you can help me to fix this issue, it's been 5 days since I a, trying to configure VPN in your 2008 and 2012 Servers. On both platform  (2008 and 2012) I am getting same error while configuring VPN (after role installation). 
    "Unable to load C:\Windows\System32\iprtrmgr.dll". So, I have removed IPv 6 entry from the registry and now able to start server (not sure what configuration it took automatically).  I tried to disable "Routing
    and Remote Access" service and got the same error while enabling "Routing and Remote Access" is running but VPN is still not functioning properly). 
    I am getting following error,
    ================================================
    Errors under the Event viewer (Remote access)
    1) --->>    CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user 10.0.0.1\chetan connected from 10.0.0.1 but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password
    combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server.
    2) ----->>   CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user connected to port VPN3-127 has been disconnected because the authentication process did not complete within the required amount of time.
    Errors under the Event viewer (Remote access)
    3) ---->>  Network Policy Server denied access to a user.
    Contact the Network Policy Server administrator for more information.
    ================================================
    I am using (MS-CHAP v2) + EAP (Authentication Method).  Please let me know if you need any additional information. 
    Thank you,

    I Guess this thread is not related to SQL Server .User is facing issue because of network or may be due to OS.I guess I will move this into windows forum.
    Moderators please move to Network forum
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Is it possible to use windows 2008 R2 for installing the groupware 5 32bit?

    I am not quite sure why there is no 64bit version and also why there is no version for crm 70
    Any help is appreciated.

    This is now supported from CRM 7.0, SP8. Please refer to note  1549802.
    Best regards,
    Brian.

  • Tips For Installation of Migration Client on Windows 2008.

    Hi All,
    I am completely new to installation of Migration Utiliity.
    If anybody have performed Installation of Migration Client on Windows 2008 machine For IPM 10g To IPM 11g data migration,
    Please help me by suggesting tips...
    Thanks in advance
    Vikas
    Edited by: 862821 on Feb 18, 2013 10:55 PM

    Hi all,
    I have installed migration client on IPM 10g machine.
    From IPM 10g I want to export perticular application.
    For which I have to configure that application in IPM migration tool for export.
    I need steps to configure application in Migration client(10.1.3.6).
    Please somebody help me ..
    Thanks in advance
    Vikas

  • Download windows 2008 friefox version. for offline installation. keeps defaulting to me mac

    I'm trying to find the latest version of Firefox for Windows 2008 R2 for offline installation. My laptop is a Mac and the download keeps defaulting to OSX and I cannot find any link to get to the windows version.
    Thanks
    Bob

    Hi comire
    Firefox 15.0.1 (the latest) System Requirements are here: http://www.mozilla.org/en-US/firefox/15.0.1/system-requirements/ (it does not specifically list Windows Server 2008, says Windows Server 2003, but that does not mean it won't work).
    download from : http://www.mozilla.org/en-US/firefox/all.html
    if the above does not work try : ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/15.0.1/win32/
    thank you

  • Error connecting to the SAP SRV on Windows 2008 Server platform

    Hi All
    We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
    When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
    We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
    After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
    *Connection failed:
    SQLState:'08001'
    SQl Server error:10060
    [Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
    Connectioin failed:
    SQLState:'HYT00'
    SQL Server Error:0
    [Microsoft][SQL Native Client]Login timeout expired
    Connection failed:
    SQLState:'08001'
    SQL Server Error: 10060
    [Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
    Please help as most user who need access can't login and they are the main users.
    rgds,
    Bongani Dlamini

    Hi Eric,
    yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
    we tried to create the key but it says access is denied.
    Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
    We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
    I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
    Thanks & Regards,
    Prabhu Reddy.

  • High Page Reads/Sec on Windows 2008 R2 64-bit running on VMware but very low Real Memory & Page file Usage.

    Hello All,
    Below is the server configuration,
    OS: Windows 2008 R2 Enterprise 64 Bit
    Version: 6.1.7601 Service Pack 1 Build 7601
    CPU: 4 (@ 2.93 GHz, 1 core)
    Memory: 12 GB
    Page file: 12 GB
    1. The actual utilization, be it a 15 minute sample, hourly, weekly etc, the utilization of real memory has never crossed 20% and the page file usage is at 0.1%. For some reason, the Pages/Sec>Limit% counter reports 100% continuously regardless of the
    sampling intervals. Upon further observation, the Page Reads/Sec value is somewhere between 150~450 and Page Input/Sec is somewhere between 800~8000. Does this indicate a performance bottleneck? (I've in the interim asked the Users, App. Owners to see if they
    notice any performance degradation and awaiting response). If this indicates a performance issue, please could someone help list down how to track this down further to which process/memory mapped file is causing it? and what I should go about performing to
    fix this problem please?
    p.s., initially the Security logs were full on this server and since page file is tied to Application, Security and System logs, this was freed up to see if this is causing the high page reads but this doesn't.
    2. If the above does not necessarily indicate a performance problem, please can someone reference few KB articles that confirms this? Also, in this case, will there be any adverse effects if attempting to fine tune a server which is already running fine?
    assuming App. Owners confirm there isn't any performance degradation.
    Thanks in advance.

    Hi,
    Based on the description, we can try to download Server Performance Advisor (SPA) to help further analyze the performance of the server. SPA can generate comprehensive diagnostic reports and charts and provides recommendations to help you quickly analyze
    issues and develop corrective actions.
    Regarding this tool, the following articles can be referred to for more information.
    Microsoft Server Performance Advisor
    https://msdn.microsoft.com/en-us/library/windows/hardware/dn481522.aspx
    Server Performance Advisor (SPA) 3.0
    http://blogs.technet.com/b/windowsserver/archive/2013/03/11/server-performance-advisor-spa-3-0.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Maybe you are looking for