Configuring oracle9i linux client

Im having problems configuring my oracle 9i linux client.
I have successfully installed Oracle 9.2.0.1 Administrator client. I entered the net manager and added a Service name to my oracle server, I test the connection and it works. Then I try to open oemmap console and login on my server, again it works fine. But when I try to connect directly using sqlplus it simply says:
ORA-12545: Connect failed because target host or object does not exist.
Note: You dont need a LISTENER on a client right?

AutomotiveGuy wrote:
... downloaded and installed Oracle instant client 10.2.0.3.
Now what? I really don't get it wht oracle doesn't provide decent wizards that complete the job?Instant Client is a stripped down version of the full Database Client. Please read the docs.
I tried to configure manually an ODBC connection and got an ORA-12254 about the TNS listener not resolving etc.If that was ORA-12154, message is likely saying that either you entered a non-existing connect identifier or your tnsnames.ora is missing/not working.
An alternative would be to use the Easy Connect method, e.g. sqlplus 'user_name/password'@hostname/dbservicename to do without tnsnames.ora configuration. So, in the ODBC config dialogue that's hostname/dbservicename.
I wrote in the TNS service name bise1db.NGNENG-SERVER2 and I got the 12254. Where is bise1db.ngneng-server2 defined and what does it resolve to? Try entering "ngneng-server2/bise1db" or "192.168.0.27/bise1db" instead.

Similar Messages

Print services and linux clients

Hi,
I'm installing a Windows Server 2012R2 as a printer server. It must give support to all kind of clients (windows, os x and linux).
Then, I must use event id 307 and 805 to count printed pages.
My question is related with event 307 and linux clients. I'm asking linux users to configure their CUPS to connect using samba printer, for example, \\server\printer001 but when I check event id, I get no file name (Remote Downlevel Document), and most important,
I get 0 printed pages in param8. I did some testing using IPP, but I were not able to configure a printer in linux (couldn't manage to make linux clients to validate with their domain user account when using IPP). I tried configuring printer on server to render
jobs in server with no luck. Tried PS drivers just in case it was easier to CUPS to send info to server, but no luck either.
So, basically, is there any way to configure server (or linux client) so I get page count in event 307 in printservice? If I must configure IPP printing, how may clients configure their printers to validate using domain accounts?
Thanks!

Hi,
Sorry for delaying in reply.
Linux clients see page count. I've paused printing and checked some documents. Property page from a linux client document shows as this:
Documents sent from windows clients show same but they've document name and page count.
SPL archive copied from spooler printer on Windows server shows that info is present too:
%!PS-Adobe-3.0
%%Creator: cairo 1.9.5 (http://cairographics.org)
%%CreationDate: Thu Jun 19 14:15:48 2014
%%DocumentData: Clean7Bit
%%LanguageLevel: 2
%%DocumentMedia: Letter 612 792 0 () ()
%%Orientation: Portrait
%%For: (testuser)
%%Title: (Phaser 5500 Descarga del archivo)
%RBINumCopies: 1
%%Pages: (atend)
%%BoundingBox: (atend)
%%EndComments
%%BeginProlog
%%BeginFeature: *JobPatchFile 1
% Default Definitions
userdict /xerox$pagedevice <<
/MediaClass null
/MediaPosition null
/PageSize [612 792]
/TraySwitch true
/ManualFeed false
/ImagingBBox null
/ProcessColorModel /DeviceGray
/DeviceRenderingInfo currentpagedevice 1 index get 1 dict copy
/PostRenderingEnhance false
/Install {
xerox$old_install xerox$flip {
currentpagedevice /PageSize get aload pop translate 180 rotate
} if
>> put
<--- snip snip REMOVED FOR SIMPLICITY snip snip ------>
showpage
%%Trailer
%%Pages: 1
%%BoundingBox: 0 0 612 792
%%EOF
Linux client used official PPD file downloaded from xerox webpage for linux
cups. Windows server uses Xerox Global Print Driver PS 5347.600.0.0 type 3 with
Render print jobs on client computers as suggested by Alan before.
Any other idea?

Linux Clients Unable to Connect to VPN

Hello all,
There are a few linux clients that need to be able to access our OS X VPN server but I have been unsuccessful at setting up a connection. I have enabled PPTP and windows clients can connect just fine, but using the linux network manager, I cannot connect, I just get a 'Connection Failed' message. I have tried both locally and via internet.
Has anyone had success connecting a linux machine to the os x vpn? Any configuration ideas? I can post the vpn logs if that would help.
Thanks
Greg

Greg,
I've never gotten this working either, and I'm surprised how little information I found after hours of googling and reading. Have you made any headway?
-Aaron

Linux client planned?

hello, is a linux client planned? i'm using ubuntu and currently use https://bitmask.net/ which gives me an easy to use, non-leaking, always-on and open source vpn client.unfortunately they don't support ipv6 just yet. this leaves me w/o vpn at places with DS-lite/ipv4 over NAT. just the raw openvpn configuration files would be nice too.and please consider open sourcing your clients, that would be a good move.

I add my vote for Linux. Anyone who is half serious about privacy is certain to be using (or contemplate using) Linux over Windows. I'd argue that your market share percentage of Linux users is far more than the share you're getting from Windows users. As OP said, there's an open source client aready, bitmask. You don't have to reinvent the wheel. Focus development on that client instead of creating your own. After all, you're generating revenue from the servers bandwith, not the client. And no one is going to take that client for themselves anytime soon. Please re-evaluate the option. The post-Snowden mindset has penetrated many homes by now. It's a win-win situation. You already have everything to sell, just need the means to sell. Even users trust is established already.

EBS forms not opening in Linux client machine

Hi all,
In our network some client machines are linux (redhat 4) and when we access the EBS (11.5.10) thru browser (Mozilla firefox) , it works until clicking icon for forms.
There is no java applet opening. What should we do invoke oracle apps forms.
regards
ravi

There is no jinit for Linux. You need to configure the Linux instance to open the 1.5.0 sun java plugin that you have installed on your Linux client machine.
The resolution is in the link provided by hsawwan:
Go to $APPL_TOP/admin, and in sid_host.xml ($CONTEXT_FILE),
replace
<sun_plugin_ver oa_var="s_sun_plugin_ver">1.4.2_04</sun_plugin_ver>
with
<sun_plugin_ver oa_var="s_sun_plugin_ver">1.5.0_13</sun_plugin_ver>
Then run autoconfig.
Or cd to $OA_HTML/bin and edit appsweb_sid_host.cfg:
Search for the lines:
; 4a) Sun JDK Plugin Parameters
; These parameters define the Sun's java plug-in to be used
sun_plugin_mimetype=application/x-java-applet;jpi-version=1.4.2_04
sun_plugin_classid=clsid:CAFEEFAC-0014-0002-0004-ABCDEFFEDCBA
sun_plugin_url=http://host.domain:port/OA_HTML/oajinit.exe
sun_plugin_version=1.4.2_04
sun_plugin_legacy_lifecycle=false
change the 1.4.2_04 entries to 1.5.0_13
sun_plugin_mimetype=application/x-java-applet;jpi-version=1.5.0_13
sun_plugin_classid=clsid:CAFEEFAC-0015-0000-0013-ABCDEFFEDCBA
sun_plugin_url=http://host.domain:port/OA_HTML/oajinit.exe
sun_plugin_version=1.5.0_13
And bounce apache and forms server.
This way, WIndows users still open with Jinitiator. This change has no effect for Windows users.

Java could not get the TGT from cache in Linux client.

Dear friends,
I have set up the kerberos server and OpenLDAP in RHEL5.5. I also have a RHEL6 as a client.
I have ran my java program using jaas to query the openldap server from the linux client.
1) I can query the openldap server If I copy the client's keytab to the client machine and use the following configruation options
principal=wpingli
useKeyTab=true
keyTab="/home/wpingli/ker/java/wpingli_new.keytab";
2) I also can query the openldap server If I am prompted to input the user/password.
This makes me believe that my enviroment is ok.
But I could not be sucessful if I run the java program after the kinit command.
klist wpingli
[wpingli@pli java]$ klist
Ticket cache: FILE:/tmp/krb5cc_500
Default principal: [email protected]
Valid starting Expires Service principal
10/20/11 16:18:06 10/21/11 16:18:02 krbtgt/[email protected]
jaas configuration
GssExampleSUN{
com.sun.security.auth.module.Krb5LoginModule required
client=true
debug=true
doNotPrompt=true
useTicketCache=true
ticketCache="/tmp/krb5cc_500";
Exception:
Debug is true storeKey false useTicketCache true useKeyTab false doNotPrompt true ticketCache is /tmp/krb5cc_500 isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
Principal is null
null credentials from Ticket Cache
*[Krb5LoginModule] authentication failed*
Unable to obtain Princpal Name for authentication
Authentication attempt failedjavax.security.auth.login.LoginException: Unable to obtain Princpal Name for authentication
Does anyone have idea on this problem?
Thanks,
Ricky

Dear friends,
I have set up the kerberos server and OpenLDAP in RHEL5.5. I also have a RHEL6 as a client.
I have ran my java program using jaas to query the openldap server from the linux client.
1) I can query the openldap server If I copy the client's keytab to the client machine and use the following configruation options
principal=wpingli
useKeyTab=true
keyTab="/home/wpingli/ker/java/wpingli_new.keytab";
2) I also can query the openldap server If I am prompted to input the user/password.
This makes me believe that my enviroment is ok.
But I could not be sucessful if I run the java program after the kinit command.
klist wpingli
[wpingli@pli java]$ klist
Ticket cache: FILE:/tmp/krb5cc_500
Default principal: [email protected]
Valid starting Expires Service principal
10/20/11 16:18:06 10/21/11 16:18:02 krbtgt/[email protected]
jaas configuration
GssExampleSUN{
com.sun.security.auth.module.Krb5LoginModule required
client=true
debug=true
doNotPrompt=true
useTicketCache=true
ticketCache="/tmp/krb5cc_500";
Exception:
Debug is true storeKey false useTicketCache true useKeyTab false doNotPrompt true ticketCache is /tmp/krb5cc_500 isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
Principal is null
null credentials from Ticket Cache
*[Krb5LoginModule] authentication failed*
Unable to obtain Princpal Name for authentication
Authentication attempt failedjavax.security.auth.login.LoginException: Unable to obtain Princpal Name for authentication
Does anyone have idea on this problem?
Thanks,
Ricky

PXE booting diskless Linux clients?

I currently have a Linux server that uses a combination of DHCP, TFTP, and PXE to boot a series of Linux clients. I would like to replace the Linux machine with a Leopard Server machine, but I don't see how to configure the Leopard DHCP daemon to send the same information.
For reference, here is a section of the Linux dhcpd.conf file:
host goldchannel {
hardware ethernet 00:50:8d:98:f4:8a;
fixed-address 192.168.0.51;
server-name "ISN";
option host-name "goldchannel";
option root-path "/diskless/goldchannel";
if substring (option vendor-class-identifier, 0, 9) = "Etherboot" {
filename "/vmlinuz_arch";
} else if substring (option vendor-class-identifier, 0,9) ="PXEClient" {
filename "/pxelinux.0";
There is also a TFTP server running, but I have seen instructions on how to configure a Leopard server the same way.
Any ideas or pointers would be greatly appreciated.

It looks like you want and need to define extra DHCP option fields.
This is not covered at all in the official Mac OS X Server PDF documentation, but if you open a Terminal window and type *man bootpd* then it will give you some information on this subject. It basically involves manually editing the /etc/bootpd.plist configuration file.
If you look at my previous post here http://discussions.apple.com/click.jspa?searchID=5850185&messageID=6021307 then you will see I am trying to work out how to use this feature as well.
Please let me know by posting a reply here if you get any further than me as I could not get it to work. I have seen a couple of vague comments from other posters suggesting they may have got it working but unfortunately they do not provide details.
Obviously if you do get it working then please post enough of your /etc/bootpd.plist file to be an example.

Linux client can't cancel print jobs in print monitor

CUPS print server on Mac OS X server 10.4
CentOS 4.4 linux client
- Mac OS X server and CentOS linux client on different authentication sources
The CentOS 4.4 linux client is configured for CUPS printing and pointed to the Mac OS X server CUPS print service.
The linux client can successfully print to available printers servered by the Mac OS X server.
The linux client has a print monitor. Normal user on linux client cannot cancel print jobs thru this print monitor. Selection of print job and pressing the 'cancel' button do not effect a cancel. Admin user on Mac OS X print server can cancel the job from the print server.
Is authorization required for a client to cancel a CUPS print job on the client?
Is same authentication setup required for both client and server?
Thanks,
-Neil

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document(s) have been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Run application developed with Oracle dev tools in Linux client

Hi,
In my organization we're using Oracle forms and reports as development tools and 10g database.
We have developed an app that runs on Windows XP, and I would like to know what are the possibilities for it to run in a Linux client, such as Fedora, Ubuntu, etc.
Is it possible? What would I need to do that?
Thanks

For Forms and Reports to run in Linux it (Linux) will need a Java plug-in.
The last time I did this I used this:
The file jre-6u12-linux-i586-rpm.bin was download from:
http://www.java.com/en/download
There should be instructions there on how to install and configure.
I will include my short enable notes below: (Keep in mind these are about two years old)
Enable and Configure
1. Go to the plugins sub-directory under the Firefox installation directory
This directory was:
/usr/lib/firefox-3.0.1/plugins (On Red Hat AS 4)
2. Enter the following command to create a symbolic link to the Java Plug-in for the Mozilla browser.
ln -s /usr/java/jre1.6.0_12/plugin/i386/ns7/libjavaplugin_oji.so
Note: Use ns7-gcc29 if Firefox was compiled with gcc2.9. (It was not)

Home directories for Linux clients?

Hello,
I want to setup OS X Server to serve as an authentication server for Mac-, Windows- and Linux-clients. I have the services DHCP, DNS, OpenDirectory (as Open Directory Master) and Windows (as PDC) running.
So far there is no problem to login on the three different platforms via LDAP. In WGM I set the home directory for Mac-clients and activated the virtual homes feature for windows. On both clients I get the network home functional but on the linux client the home does not appear.
How do I configure the server to realize that? I thought that the linux clients would use the samba share that the windows clients use.
iMac G5 (iSight) 20" Mac OS X (10.4.6)

When you log in to the linux machine, do you get an error that states that the home directory for the user cannot be found? That error message should give you the path that is set in the LDAP directory as the home directory for that user. This directory needs to be added to the Linux filesystem, and then the Users folder on the OS X Server needs to be NFS mounted (rw) on the Linux machine.
For ease of transition, I softlink /home to this directory on the Linux machines.

Apple Remote Desktop - sending SSH commands to linux clients

Has anyone been able to configure ARD to send SSH commands to linux clients?
The VNC part works, but not sure how to configure the UNIX commands.
We are trying to be able to send rpm, df, etc commands to multiple centos clients at one time...
thanks.

not sure how to configure the UNIX commands.
You can't. That's not a feature of ARD.

Kerberos linux client

Hello, I'm trying to configure a Linux server to use the kerberos on a Leopard Server. I have configured everything on the Linux side but I just need to add the server to the kerberos database (I already have some leopard clients). Does anybody know how to do this?
Thanks a lot.

OK, I've got it working now:
* copy /var/db/krb5kdc/kdc.conf from mac server to /etc
* copy /Library/Preferences/edu.mit.Kerberos to /etc/krb5.conf
* Try to login using kinit (kinit username should authorize you)
For integration with pam, install pam_krb5, configure the services in pam.d. Didn't try ssh integration, this is more work I think, but for smtp auth and imap auth over sasl -> pam -> kerberos with plaintext password over SSL it works fine.

New files and folders on a Linux client mounting a Windows 2012 Server for NFS share do not inherit Owner and Group when SetGID bit set

Problem statement
When I mount a Windows NFS service file share using UUUA and set the Owner and Group, and set the SetGID bit on the parent folder in a hierarchy. New Files and folders inside and underneath the parent folder do not inherit the Owner and Group permissions
of the parent.
I am given to understand from this Microsoft KnowledgeBase article (http://support.microsoft.com/kb/951716/en-gb) the problem is due to the Windows implmentation of NFS Services not supporting the Solaris SystemV or BSD grpid "Semantics"
However the article says the same functionality can acheived by using ACE Inheritance in conjunction with changing the Registry setting for "KeepInheritance" to enable Inheritance propagation of the Permissions by the Windows NFS Services.
1. The Precise location of the "KeepInheritance" DWORD key appears to have "moved" in Windows Server 2012 from a Services path to a Software path, is this documented somewhere? And after enabling it, (or creating it in the previous
location) the feature seems non-functional. Is there a method to file a Bug with Microsoft for this Feature?
2. All of the references on demonstrating how to set an ACE to achieve the same result "currently" either lead to broken links on Microsoft technical websites, or are not explicit they are vague or circumreferential. There are no plain Examples.
Can an Example be provided?
3. Is UUUA compatible with the method of setting ACE to acheive this result, or must the Linux client mount be "Mapped" using an Authentication source. And could that be with the new Flat File passwd and group files in c:\windows\system32\drivers\etc
and is there an Example available.
Scenario:
Windows Server 2012 Standard
File Server (Role)
+- Server for NFS (Role) << -- installed
General --
Folder path: F:\Shares\raid-6-array
Remote path: fs4:/raid-6-array
Protocol: NFS
Authentication --
No server authentication
+- No server authentication (AUTH_SYS)
++- Enable unmapped user access
+++- Allow unmapped user access by UID/GID
Share Permissions --
Name: linux_nfs_client.host.edu
Permissions: Read/Write
Root Access: Allowed
Encoding: ANSI
NTFS Permissions --
Type: Allow
Principal: BUILTIN\Administrators
Access: Full Control
Applies to: This folder only
Type: Allow
Principal: NT AUTHORITY\SYSTEM
Access: Full Control
Applies to: This folder only
-- John Willis, Facebook: John-Willis, Skype: john.willis7416

I'm making some "major" progress on this problem.
1. Apparently the "semantics" issue to honor SGID or grpid in NFS on the server side or the client side has been debated for some time. It also existed as of 2009 between Solaris nfs server and Linux nfs clients. The Linux community defaulted to declaring
it a "Server" side issue to avoid "Race" conditions between simultaneous access users and the local file system daemons. The client would have to "check" for the SGID and reformulate its CREATE request to specify the Secondary group it would have to "notice"
by which time it could have changed on the server. SUN declined to fix it.. even though there were reports it did not behave the same between nfs3 vs nfs4 daemons.. which might be because nfs4 servers have local ACL or ACE entries to process.. and a new local/nfs
"inheritance" scheme to worry about honoring.. that could place it in conflict with remote access.. and push the responsibility "outwards" to the nfs client.. introducing a race condition, necessitating "locking" semantics.
This article covers that discovery and no resolution - http://thr3ads.net/zfs-discuss/2009/10/569334-CR6894234-improved-sgid-directory-compatibility-with-non-Solaris-NFS-clients
2. A much Older Microsoft Knowledge Based article had explicit examples of using Windows ACEs and Inheritance to "mitigate" the issue.. basically the nfs client "cannot" update an ACE to make it "Inheritable" [-but-] a Windows side Admin or Windows User
[-can-] update or promote an existing ACE to "Inheritable"
Here are the pertinent statements -
"In Windows Services for UNIX 2.3, you can use the KeepInheritance registry value to set inheritable ACEs and to make sure that these ACEs apply to newly created files and folders on NFS shares."
"Note About the Permissions That Are Set by NFS Clients
The KeepInheritance option only applies ACEs that have inheritance enabled. Any permissions that are set by an NFS client will
only apply to that file or folder, so the resulting ACEs created by an NFS client will
not have inheritance set."
"So
If you want a folder's permissions to be inherited to new subfolders and files, you must set its permissions from the Windows NFS server because the permissions that are set by NFS clients only apply to the folder itself."
http://support.microsoft.com/default.aspx?scid=kb;en-us;321049
3. I have set up a Windows 2008r2 NFS server and mounted it with a Redhat Enteprise Linux 5 release 10 x86_64 server [Oct 31, 2013] and so far this does appear to be the case.
4. In order to mount and then switch user to a non-root user to create subdirectories and files, I had to mount the NFS share (after enabling Anonymous AUTH_SYS mapping) this is not a good thing, but it was because I have been using UUUA - Unmapped Unix
User Access Mapping, which makes no attempt to "map" a Unix UID/GID set by the NFS client to a Windows User account.
To verify the Inheritance of additional ACEs on new subdirectories and files created by a non-root Unix user, on the Windows NFS server I used the right click properties, security tab context menu, then Advanced to list all the ACEs and looked at the far
Column reflecting if it applied to [This folder only, or This folder and Subdirectories, or This folder and subdirectories and files]
5. All new Subdirectories and files createdby the non-root user had a [Non-Inheritance] ACE created for them.
6. I turned a [Non-Inheritance] ACE into an [Inheritance] ACE by selecting it then clicking [Edit] and using the Drop down to select [This folder, subdirs and files] then I went back to the NFS client and created more subdirs and files. Then back to the
Windows NFS server and checked the new subdirs and folders and they did Inherit the Windows NFS server ACE! - However the UID/GID of the subdirs and folders remained unchanged, they did not reflect the new "Effective" ownership or group membership.
7. I "believe" because I was using UUUA and working "behind" the UID/GID presentation layer for the NFS client, it did not update that presentation layer. It might do that "if" I were using a Mapping mechanism and mapped UID/GID to Windows User SIDs and
Group SIDs. Windows 2008r2 no longer has a "simple" Mapping server, it does not accept flat text files and requires a Schema extension to Active Directory just to MAP a windows account to a UID/GID.. a lot of overhead. Windows Server 2012 accepts flat text
files like /etc/passwd and /etc/group to perform this function and is next on my list of things to see if that will update the UID/GID based on the Windows ACE entries. Since the Local ACE take precedence "over" Inherited ACEs there could be a problem. The
Inheritance appears to be intended [only] to retain Administrative rights over user created subdirs and files by adding an additional ACE at the time of creation.
8. I did verify from the NFS client side in Linux that "Even though" the UID/GID seem to reflect the local non-root user should not have the ability to traverse or create new files, the "phantom" NFS Server ACEs are in place and do permit the function..
reconciling the "view" with "reality" appears problematic, unless the User Mapping will update "effective" rights and ownership in the "view"
-- John Willis, Facebook: John-Willis, Skype: john.willis7416

Message-Pls wait while Windows configures SAP B1 Client

Hi,
While logging in to SAP B1,system is displaying a msg 'Please wait while Windows configures SAP B1 Client.' Same msg is displayed while connecting to DTW as well. Then it takes a few minutes to connect . What could be the reason? Will the uninstallation and reinstallation of SAP B1 client solve the problem? Since the license file has been imported , is it recommended to uninstall the SAP B1Client. This msg appears while logging in from client machines as well as Server machine.
We are working on SAP B1 8.8 PL 10 ,Localization India.
Please guide me.
Sudhir Jadhav

Hi,
the message in the DTW can be removed by reinstalling the DTW. You can also do the same for B1 client. If this message appears only in the server's B1 client application, you can do there. If it is also happened in the user PC, you must also reinstall it.
JimM

Pdf printing with linux client

hi,
i'm working with a SuSE 9.3 Client and I want to use PDF-Printing with the Acrobat Reader. With Windows Xp it works fine, but if i choose the PDF-Printer with the Linux-Client nothing happens. The PDF-Job exist in the cue. What do i have to do that it works?
P.S. I`am from germany ;-)

Thanks! But on which machine do i have to put the lp command?
Application-Server?
Tarantella Server?
Client?
I have put it on my Client! But nothinng happens.
My PATH --> /home/me/bin:/usr/local/sgdee:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/jvm/jre/bin:/usr/lib/qt3/bin
my script -->
me@my-notebook:~> cat /usr/local/sgdee/lp
#!/bin/bash
LPINFILE=/tmp/.nclp.$$
PATH="/bin:/usr/bin:/usr/local/bin:/usr/bin/X11:/usr/X11R6/bin"
export PATH
[ -f $1 ] && mv $1 $LPINFILE
[ -f $2 ] && mv $2 $LPINFILE
echo "Print: $* -> $LPINFILE" >> /tmp/nclog.`logname`
echo "/usr/bin/xpdf -display $DISPLAY $LPINFILE; rm -f $LPINFILE" | at now
exit 0
me@my-notebook:~>

Configuring oracle9i linux client

Similar Messages

Maybe you are looking for