Configuring PPP options for only one VPN connection

How do you configure PPP options for only one VPN connection that is using L2TP over IPSec? The built-in VPN client in 10.4.9 is failing authentication because it won't talk MSCHAP-V2 (this is the only authentication protocol I can use) with the server. I am able to establish a connection if I add the following to /etc/ppp/options:
refuse-eap
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
However, these options will affect all PPP connections. The preference file that contains the network configurations (/Library/Preferences/SystemConfiguration/preferences.plist) also contains PPP options for each specific network service. After some searching around, I found that there are several keys that seem promising (MSCHAP2, etc.). But these keys take a string value and I have no clue what they should be. These keys are defined in SCSchemaDefinitions.h file.
Any ideas?
  Mac OS X (10.4.9)  

Hi Brian,
I just tried to check all of ADDT´s "includes" files for any internal references (read: "require" or "require_once" statements) to the file "tNG_config.inc.php". So far I can only see this file referenced in the file "tNG.inc.php" (within the "$KT_tNG_uploadFileList1" array).
So what could this mean ? Maybe you´ll have to make copies of the the original "tNG.inc.php" as well and save them as, say, "tNG.inc_ital.php" file plus make sure that these copies internally point to a different "tNG_config_ital.inc.php" file -- because it´s always the first mentioned file which gets referenced from e.g. an ADDT login page (see the "Load the tNG classes" - part)
I want to use ADDT’s User Registration Wizard and I have looked at all the neat stuff in the Control Panel/Login Settings
The Control Panel will always update the main "tNG_config.inc.php" file, so any further modifications will have to become manually applied to the custom files you´re creating.
Cheers,
Günter

Similar Messages

  • Change view options for only one window

    Usually I prefer to view my windows as icons, but I like certain specific windows to show up in list mode. On 10.4, in the View Options, there was an option for "This window only" but that seems to be missing in 10.5. Am I just blind???

    I agree. i enjoyed that feature in 10.4. It drives me nuts that if I want to change the view options for one folder because of the way I want to view its specific contents, the rest of folders on my system changes at the same time. I would appreciate it if each folder had a "memory" of its own view option settings.
    However, I acknowledge that sometimes you would want to change a setting that affect all windows. But it shouldn't overwrite the remainder of the settings. If, for example, you wanted to change the text size of every icon in every window, but leave everything else as set in each individual folder, there should be an option for this!

  • Why is print in grey and PDF not a saving option for only one of my photoshop files?  All other files I open are fine.  Please help!

    I am trying to turn a photoshop document in to a pdf. Print is in grey and under Save As PDF is not an option.   Any other PS document I open allows me both options. What is wrong with this document?! 
    What I have tried and was unsuccessful:
    I changed it to illustrator and saved as PDF but the colors were very dark.
    I have renamed it and opened again.
    I duplicated the layers to another doc.
    Closed PS and opened it again.
    Please help. Thanks!

    Here is what I see...
    It is in RGB color / 32 bits/channel
    Any suggestions?

  • I would need to install Adobe Connect Add-in Test for only one webinar. When I pressed instal button -  it said to me - it cannot be written on hard disc. Could you help me, please. Bretislav

    I would need to install Adobe Connect Add-in Test for only one webinar. When I pressed instal button -  it said to me - it cannot be written on hard disc. Could you help me, please. Bretislav

    After posting my concern/question, especially in regards to the optical drive, I read this on this forum:
    Jul 11, 2011 5:21 AM      
    I would like to update my macbook pro from Tiger to Snow Leopard, but my optical drive is not working. Can I take my macbook pro into the apple store and have them install it via a portable drive?
    MacBook Pro, Optical drive is no longer working
    Another poster replied, "Yes, I believe they will."
    Is this true? Can someone verify this?  Any idea of cost?  I really don't need my optical drive.  Besides, end of year, I'm getting a new Mack Book Pro.

  • How to say application module(s) to consume only one DB connection

    Hi,
    In my application, i use UI Shell template. All of my task flows are said to have new transaction always and not to share the data control. i have bunch of application modules (not nested AM) with many view objects. All the view objects are custom java data source implemented and none of them requires DB connection as they interact with DB using tuxedo connection. Expected concurrent users will be around 800.
    i can understand that application module requires DB connection for activation/passivation, but how can i say all of my application modules to consume only one DB connection??
    Thanks in advance.
    Raghuraman

    Jobinesh,
    My application is based on UI tab shell template with each and every task flow set to begin with new transaction always.
    I was using database tables for LOV view objects data population alone. Now that also has been changed to custom view data source implementation because of client requirement (LOV data needs to be cached till user-browser session)
    With the new implementation,
    1. I have some AMs with instances of entity driven VOs. With this, I do transaction with legacy system through Tuxedo. Custom view data source implementation is done to populate data from service. Similarly Update to service will happen by reading transaction listener list on save.
    2. I also have couple of AMs with instances of non entity-driven VOs, which will be used as read-only table/LOV. For this also custom view data source implementation is done by reading the reference database table only one time during deployment.
    3. As of now, none of my AMs are specified as Shared AM.
    Questions:
    1. I want to utilize the AM passivation/activation feature to control memory usage. I came to know "*The passivation process saves information used by the AM into the passivation store - usually a database*". I have a database, from where i am reading data for LOV during deployment. Can i have the single connection of that database configured for all the AMs (Both tuxedo transaction VO's AM and LOV VO's AM) so that i can avail this feature. If so, how can i configure all the AMs to consume only one connection?
    2. Any other way to avail this AM passivation/activation without database.
    Thanks in advance.
    Raghu

  • Sending contents to windows authenticated service results in an error - "Content option is only supported when connecting anonymously."

    Error results when trying to send JSON content to a service which is internally hosted and requires windows authentication.
    Here is the sample code :
    let
    Content1 = "{""query"":....."},
    Source1 = Web.Contents("http://MyWindowsAuthenTicatedService:####/" ,[Content=Text.ToBinary(Content1)])
    in
    Source1
    Here is exact text from the error:
    [DataSource.Error] Web.Contents with the Content option is only supported when connecting anonymously.
    BTW, I tried configuring the Privacy and "Fast Combine" options and that does not work either
    Thanks for your help !

    Thanks Curt, for the prompt reply.
    In our case, the users are internal and so is the service which accepts the content.  Once the user is authenticated by the windows account, it reasonable to allow content.  
    Would it not be better anyway to have the restriction for anonymous access as opposed to this case where the account is already authenticated on an internal windows domain ?

  • Skype not notifying (oange flash) for only one con...

    I've been having the issue of skype not giving me an orange flashing taskbar notification for only one of my contacts.
    Strangely, this does not always happen. Sometimes this contact's messages will in fact make my taskbar flash. Other times it will not. I can add that both the contact and I have our status on "online", furthermore I have checked the following suggestion I found here on the forums but it did not work as it was already properly set to always notify me:
    Highlight the contacts name in the Contacts list so you can see the chat window for this contact. Click on the Conversation menu and select Notification settings. Select there the appropriate option for the notifications.
    Any ideas? This has really been going on for at least a few months, perhaps a year

    Well, that is hard to tell. Like I said the website may have updated their technology. Just because it works with the Desktop, doesn't mean there is not a reason that the laptop might not have a problem. You have 2 different systems and
    most likely different configurations.
    You may want to check Tools and in the add ons for both, look for Shockwave Flash Object...ActiveX Control..Flash10e.ocx should be installed and enabled.
    Also for each check C:\Windows\System32\Macromed\Flash  Right click the Flash folder and make sure for IE that the files are vs 10.0.45.2 by checking the properties.
    If you have the correct Flash files and the correct SWO then, some other cause would be looked at.
    It has been my experience to not "assume", but verify:-)
    Thanks,
    eidnolb

  • Two Macs - only one can connect to Airport at a time

    Starting today, after 10 days of successful operation, when I came home I couldn't connect to my home (new "square" Airport Extreme) network with my Core 2 MacBook Pro. My wife was happily connected on her PowerBook G4.
    Puzzled, I tried a few obvious things:
    Airport OFF, Airport ON ... no joy
    Logout and back in ... no joy
    Restart ... no joy
    Then I turned my attention to the Base Station:
    Restart ... nope
    Change to "None" security ... nope
    Change back to "WPA Personal" ... nope
    Humbled, I stopped and had dinner. My wife's G4 went to sleep, my Intel went to sleep. Now it gets interersting! My Intel woke up first and immediately joined the network -- I'm happy till I hear my wife say SHE can't get connected.
    To make a long story short, I have two laptops on my desk, and only one can connect at a time! This is BIZARRE. Turn off Airport on either one and its buddy gets a connection immediately, and vice versa. Sleep the connected one and the other connects.
    I am out of ideas.
    Errors on the G4:
    Feb 28 20:09:45 localhost configd[35]: WirelessConfigure: 88001003
    Errors on the MBPro:
    various 88001006 errors as reported by others in this forum.
    Both Machines at all the latest updates; the MBPro has the new Extreme software installed from the CD that came with the new hardware.
    I would welcome suggestions ...
    MacBook Pro Core 2   Mac OS X (10.4.8)  
    G4 Cube   Mac OS X (10.4)  

    Software Update is not offering me any Airport updates on the G4 (or the Intel).
    The recent Airport Update, "AirPort Extreme Update 2007-001", is of course only for Intel Macs.
    They could only be "trying to use the same IP address" if they were not configured to use DHCP, but they are configured to use DHCP, and whichever connects does get an address in the 10.0.1.[2-200] range so I think that's not the problem.

  • Tacacs authentication fails for one user account for only one switch

    Hi,
    I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
    The same user account works well for other devices.
    The AAA configs are same on every devices in the network.
    Heres the show tacacs output from the switch where only one user account fails;
                  Socket opens:        157
                 Socket closes:        156
                 Socket aborts:        303
                 Socket errors:          1
               Socket Timeouts:          2
       Failed Connect Attempts:          0
            Total Packets Sent:       1703
            Total Packets Recv:       1243
              Expected Replies:          0
    What could be the reason ?
    No errors on ACS server; same rights had been given to the user account.
    Thanks to advise.
    Prasey

    Hi there,
    Does the user get authenticated in the ACS logs?
    reports and activity----> failed attempts
    ro
    reports and activity----->  passed authentications
    That will help narrow it down.
    Brad

  • Can I show a data label for only one point in a series?

    Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
    There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
    If this can't be done, I guess that adding a text box over those points would work.
    Thanks

    Hi W-T,
    Welcome to Apple Discussions and the Numbers '09 forum.
    wahoo_tiger wrote:
    Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
    Sure. Here's and example labeling only the MIN and MAX points.
    Column B contains the data charted with the blue line.
    Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
    Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
    Regards,
    Barry

  • AA implement aaset value for only one depreciation area

    Hi,
    Is it possible change acquisition value of asset for only one depreciation area, the area 20 for example?
    By point of view of FI I can post the accounts of area 20 by  trx OASV,
    but in AA how can I do?
    If I use the trx AB01 the  acquisition value is modified in every area.
    Any assistance would be greatly appreciated.

    You upload the values in AM with the transaction AS91, this don't create postings in FI. It is possible to upload different values by depreciation area.
    With the transaction OASV you create manual the total postings in FI. An other option is to use the transaction  ABF1 (search on this forum with ABF1 how it is working)
    When an area post direct you have to use the transaction OASV (asset account is reconcilation accounts) for the other area you can use a standard FI posting.
    When you use AB01 you can create you own transaction type and limet them to one depreciation area or a group (tray to play with Tty 147, there you can fill in amounts by depreciation area.)

  • HT200259 Configuring adaptive firewall for VNC and RDP connections

    Hello, I'm using Yosemite with OSX Server.  Is there a way of configuring adaptive firewall for VNC and RDP connections?

    Apple has never documented what the adaptive firewall really does, as far as I know. It seems that the built-in network services send it some kind of notification whenever there is a connection attempt. The Screen Sharing service is one of those, so it should be protected. There is no built-in RDP service, so if you somehow added one, it would not be protected.

  • How can I correct that emails for only one of my address going direct to my trash file before even being read and this just started a while back not before?

    have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.

    thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.

  • Changing DB character set for only one schema

    We are interested in changing the characterset of only one user from Western European to AL32UTF8.
    Could you please verify if the following steps will be correct to do the same.
    1. Run CSScan on the one user
    2. Fix any issues
    3. Export that one user (with NLS_LANG set to <your old database character set>)
    4. Create a new database in the AL32UTF8 character set
    5. Import that one user into the new database (with NLS_LANG set to <your old database character set>)

    Actually your title is a little incorrect. You are not changing CS for only one schema in existing DB which is not possible. You are trying to migrate a schema to new CS DB. Which is totally doable and your approach is mostly correct.
    Database Character Set Scanner provide user scan mode
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch12scanner.htm#i1006013
    Mostly the issue could be data truncation, especially if you have column defined using char or varchar2 vs nchar and nvarchar2
    because char/varchar is defined in bytes, AL32UTF8 is multi-bytes char set, some character of your old data could saved more than 1 bytes in new DB and can't fit into the column size.

  • Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

    Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
    <Email Edited By Host>

    These are user-to-user forums - I've asked the hosts to remove your email address from your post.
    Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Maybe you are looking for