Configuring Process Integration Scenarios for Advanced Adapter Engine

Hello @all,
i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
Documentation:
http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
Thanks and kind regards
Andreas

Hi,
Use thse links:
Advanced Adapter Engine Configuration in PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
Sreeni.

Similar Messages

Alerts for a scenario in Advanced Adapter Engine

We have done an end to end scenario using advanced adapter engine in PI 7.1.
We have created an alert to give info abt an error which mite occur.
Do alerts work for messages which dont go to integration engine as the alert category is taken from abap stack?

Yes you can have alert mail/ message with AAE....just select where the error occured as Adapter Engine.

Configuring Process Integration Scenario

Hi,
I have created a Process Integration Scenario in ESR and trying to create ID objects.
I am referring this blog: /people/shailesh.mane/blog/2006/06/29/b2b-configuration-part-ii--creating-the-configuration-using-the-automated-configuration-tool
I am confused while running the wizard.
1) Can anyone please confirm what objects should I create in ID before running the wizard
I have a External Party --> SAP PI -> IDOC scenario (with multiple actions inbetween). I am using PI7.1.1
Thank you,
Pankaj.

Hi Pankaj ,
While you design your process integration scenario . while you do insert application component for sender and receiver
Have you checked the tab " Communication tab --" External party with B2B communication."
I am not sure but this is your problem I guess ,
Please have a look at the link
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/ce988318d3424be10000000a421937/frameset.htm
Since you are using IDocs , you cannot use integrated configurations( not sure whetehr its supported in your Service pack version ) hence no use of "sender uses virtual receiver "
http://www.riyaz.net/blog/local-processing-in-the-advanced-adapter-engine-using-pi-71/technology/sap/494/
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20c237f1-3caf-2b10-3a83-cce9ed5fbdf3?
QuickLink=index&overridelayout=true
You can use sender uses a virtual receiver while creation of sender agreement then you need not make separete receiver determination and interface determination , in case of B2B scenarios try that option as well
let me know if it works or not
Regards
Ninad
Edited by: Ninad Sane on Oct 20, 2010 8:36 AM
Edited by: Ninad Sane on Oct 20, 2010 10:54 AM

Alerts for Advanced adapter engine

Hi,
I have created a file to file scenario using integrated configuration, configured alerts for the same with "No restrictions" rule in RWB.
However when i test by dropping a file to the polling directory, there seems to be no alert triggered.
I have checked alert configuration and they are configured correcly.
I also noticed that the messages are going into scheduled state in message monitoring upon failing in mapping.
Can standard PI alerts be raised for Integrated configurations ?? if yes then what am i missing here?
Any thoughts ?
Thanks

Hi Amith,
Try creating the alerts under alert category in ESR.
Integrated Configurations run totally on the Java stack. I believe you have created the alert in ALRTCATDEF, which is in ABAP stack of PI. Create a alert category in ESR and use the same. I think it will work.
Regards,
Souvik

Webinar:SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7

+Please Note: This webinar is aimed at consultants, Patners and Customers in APJ Region and is scheduled at 2.00 - 3.00 p.m. Singapore Time (UTC +8)+
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, September 1. The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at experts, thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, September 1, 2009:
SAP NetWeaver Process Integration u2013 Advanced Adapter Engine in PI 7.1 EHP1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Charu Goel with the SAP Intelligence Platform & NetWeaver Regional Implementation Group. Charu provides the following abstract:
With PI 7.1 Enhancement pack 1, we continuously thrive to bring in advancements in AAE. In this APJ expert call, we talk about the much awaited capability of IDOC packaging along with the enhancements in JMS. You will learn about the interaction between the AAE and ABAP stack, new enhancements on the JDBC adapter and overall improvements in the technical adapters available with PI 7.1 EHP1.
For meeting and Dial-in detail please register [here|http://www.surveymonkey.com/s.aspx?sm=qkBfQCM5FM_2f_2b4O0ihVpFRw_3d_3d]
Thanks & Best Regards,
Sarma Sishta

Hi,
This was one of the good session...
Especially the features such as;
-- TCP/IP connection control with JMS adapters
-- Empty file Handling
-- Set the various Attributes for Mail attachments via dynamic configuration (intially only subject line was possible)
-- Message Prioritization
-- single IDOC Ack for IDOC Packaging
-- IDOC packaging
-- and many more........................
Even the future indicatioon of IDOC J2EE based adapter will provide new direction to the existion IDOC related scenarios..
One thing that was changed in IDOC packaging is to control it via Sender Communication channel...intially we were doing it either via ECC system or with t-code "idxpw"
Its almost in same way...but from J2EE based adapter perceptive IDOC packaging will be available with Java stack...and will no need to depend only ABAp stack for this feature.
Thanks
Swarup

Question about Integrated Configuration (Advanced Adapter Engine in PI 7.1)

Hello,
When you use Advanced Adapter Engine in PI 7.1 with Integrated Configuration scenario, it bypasses ABAP stack therefore you can't monitor processed message in SXMB_MONI. Instead this message shows up only in RWB Adapter Engine message monitoring. When you select the message from there, you can view the BEFORE mapping payload in Message Content tab. My question is how do you view the AFTER mapping payload when using Integrated Configuration.
Thanks,
Jay

> My question is how do you view the AFTER mapping payload when using Integrated Configuration.
You can't.
So first you have to configure a standard scenario and test the stuff. When everything is fine, remove the standard scenario and create an Integrated Configuration.

Message flow between advanced adapter engine and messaging system for ICO scenarios

Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472    Information    MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472    Information    Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.499    Information    Message successfully put into the queue
12/08/2014 09:26:06.499    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499    Information    The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500    Information    HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.501    Information    Message status set to DLNG
12/08/2014 09:26:06.513    Information    Message successfully put into the queue
12/08/2014 09:26:06.513    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515    Information    Message status set to DLNG
12/08/2014 09:26:06.533    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.548    Information    Message successfully put into the queue
12/08/2014 09:26:06.548    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550    Information    Message status set to DLNG
12/08/2014 09:26:06.551    Information    Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.571    Information    Message successfully put into the queue
12/08/2014 09:26:06.571    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573    Information    Trying to put the message into the send queue
12/08/2014 09:26:06.573    Information    Message status set to DLNG
12/08/2014 09:26:06.580    Information    Message successfully put into the queue
12/08/2014 09:26:06.580    Information    The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582    Information    Message status set to DLNG
12/08/2014 09:26:06.583    Information    Delivering to channel: IDOC_R
12/08/2014 09:26:06.583    Information    MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583    Information    XI message received for processing
12/08/2014 09:26:06.587    Information    Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588    Information    IDOC metadata repository is RXX
12/08/2014 09:26:06.589    Information    Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590    Information    XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595    Information    Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813    Information    IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817    Information    TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819    Information    Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821    Information    Message status set to DLVD
Thanks & regards
Dingjun

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

Using Advanced Adapter Engine in PI 7.1 to design a ABAP proxy scenario

Hi
We are currently on XI 3.0 and have a scenario in production that is as follows
R3 --> EOIO (QOS ) --> XI ---> SQL DB A, SQL DB B, SQL DB C ( split in XI , message from R3 in EOIO sequence routed to three different sql servers ). We use this scenario to push master data change messages from R3 . Whenever we do a full push of masterial/customer master from R3, it takes a lot of time for XI to process the messages, the messages hopping from Integration server and then to J2EE server.
We are moving to PI 7.1 and want to use the AAE ( advanced adapter engine ) to avoid the integration server in the above scenario and thus cut out an additional hop and send the message from R3 directly to the AAE on PI 7.1 server
i.e R3 --> EOIO (QOS ) --> PI J2EE server(AAE ) -->SQL DB A, SQL DB B, SQL DB C .
I read in new PI 7.1 features that AAE has all features available in Integration server ( routing ,mapping ) and also XI adapter type based SOAP connectivity ( R3 --> PI http connection ) is possible using AAE.
In that case, can the above scenario in XI 3.0 be redesigned /reimplemented in PI 7.1 taking advantage of AAE and thus increasing the throughput ? Please advise with your thoughts and relevant documents on AAE on PI 7.1 with an example of implementation of the above scenario.

I read in new PI 7.1 features that AAE has all features available in Integration server ( routing ,mapping ) and also XI
adapter type based SOAP connectivity ( R3 --> PI http connection ) is possible using AAE.
If not wrong this is available for SAP PI 7.1 with Ehp1.
If you try to create SOAP channel ijn SAP PI 7.11 then in the Message Protocol then in the drop-down you see SOAP and XI3.0
Regards,
Abhishek.

Configuration Steps for Decentralized Adapter Engine

Hi all,
What all configuration steps are required to make Adapter Engine as
Decentralized AE.
I have made required changes in SLD DataSupplier in Visual Administrator.
what more configurations have to be done? On SAP XI Server and Decentralized
Adapter Engine.
With regards
Prasad

Prasad,
After configuring SLD data supplier in Visual Admin, you need to the following
1) Configure the gateway service for the central integration server on adapter engine host.
2) Perform Initial adapter engine cache refresh
3) Trigger data transfer to SLD
4) Check the connection parameters in exchangeProfile
5) Create HTTP destination pmistore in java environment
you have to go through all these tests for decentralized adapter engine. If you have XI configuration guide, it has all these steps in detail for you to configure
--Archana

1636215 - Performance monitoring for the Advanced Adapter Engine

Hi ALL,
How can we monitor the performance by changing the parameter to true in the above note please please help me
Thanks,
Raj

Hi Dheeraj,
Since you've gone through the note, I'm assuming you know how to activate the performance monitoring for adapter engine.
However, there are reservations against doing it in any system Dev/Quality/Production. Reason being, it becomes performance/load intensive when the perf. monitoring is on.
Still, you can diagnose bottlenecks and execution trends in Dev/Quality using performance monitoring as suggested in the note but be aware that your box is coping well with it. Please note, once activated, you don't have to do anything else. System will automatically collect performance data and you will be able to browse through it using the performance monitoring link.
How to use it???
You see a performance monitoring link in Monitoring Home (navigate via Configuration and Monitoring home from PI/PO homepage).
It will help you analyze the flow of message on periodical basis (hourly/daily etc) and will give you more stats on number of messages in that time duration, average time taken, message sizes (min, max and avg), interface-by-interface detail of runtime consumption at every stage etc.
Please go through standard SAP help for more clarity:
Monitoring Performance - Advanced Adapter Engine - SAP Library
Apart from this, there is this great blog by Suseelan around monitoring:
http://scn.sap.com/docs/DOC-35805
Hope this helps.
Regards,
Abhishek

Difference between Process integration scenario and configuration scenario.

Hi,
Please tell me what is difference between Process integration scenarion and configuration scenarion in SAP PI.
Is Process integration scenario is BPM concept? also what is the advantages over configuration scenario.
Regards,
Manigandan

Hi Manigandan,
Speaking widely:
Process integration scenario: there is a ccBPM, like the workflow in ABAP, even when you one inside the PI it's generated a workflow in the ABAP stuck
Configuration scenario: it is object to link the integration directory and the esr/IR when you define the logic of your implementation. It isnt mandatory, but you can organize better you develoments if you make an scenario for a "real scenario" like a file to soap integration, you can define it like a configuration scenario.
Regards.

URL For J2SE Adapter Engine Configuration

Hi All,
I have to go for adapter configuration for that i need to go to Adapter Engine Configuration Screen. So can any one please tell me the URL for going to the particular screen.
Regards,
Rahul

Hi rahul,
I think URL for J2SE adapter engine is http://hostname:portname. Just check following link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm">J2SE ADAPTER ENGINE</a>
Regards,
Keith.

Load balancing Central Advance Adapter Engine

Hello All,
I am trying to get more information on load balancing Central Advance Adapter Engine for SAP PI 7.1. How do I configure and load balance Advance Central Adapter Engine to handle more volume? Should I added extra non-central adapter engines to achieve this? If yes, How do I do this i.e. configuration etc? If not, then what is the best practice on load balancing the Central Advance Adapter Engine?
Thank you for replying,
Mayur

Hi,
I just post your Q&A here.
Cheers,
Aaron
I have few follow up questions regarding your answers.
1. For options 1 and 2, could you elaborate or point me some documentation on sap.help or somewhere else which talks more about these options?
   =========================================
   Basically you have more power with more processes (Instances or Server node) to process your messages in the Adapter Engine. That's the way to improve the system throughput.
   For more information, please refer to SAP PI tuning guide (I could not find the guide for 7.1, but the principle is still the same)
   https://websmp102.sap-ag.de/~sapidb/011000358700000592892005E.PDF
=========================================
2. For option 3, add non central adapter engine and configure scenarios.
    1. So, do I have to run non-central adapters on separate servers?
   ====================
    Yes. It is recommended to run non-central adapter enging on separate server to minimize the reciprocal impact in terms of resource contention.
   ==============
    2. Do I need web dispatcher to do the load balancing between central and non-central adapter engine?
    ========
    No. this is also not possible since the below is true.
    =========
I somehow think that if I am selecting the non-central adapter engine when creating the communication channel then it won't be "load balancing" because I will be sending a particular interface to the non-central engine at design time instead of runtime.
Thank you for taking time and replying to my questions.

Whats the Advanced Adapter Engine ?

What is Advanced Adapter Engine and how its different from normal adapter engine

HI Prathna
You use the Advanced Adapter Engine to connect the Integration Engine to SAP systems (RFC adapter) and non-SAP systems. You use the various adapters in the Adapter Engine to convert XML- and HTTP-based messages to the specific protocol and format required by these systems, and the other way around.
Using Integrated Configuration you can define a local Message Processing on the Advanced Adapter Engine. The Advanced Adapter Engine provides mapping and routing for this locally. Message Processing is only executed on the Advanced Adapter Engine from one adapter to another without the involvement of the Integration Engine. You can gain a great improvement in performance.
You can implement all adapters on the Adapter Engine for a local Message Processing on the Advanced Adapter Engine, apart from the RNIF adapters and the CIDX adapters.
If you do not use Integrated Configuration, Message Processing will always be performed by the Integration Engine to execute the routing and mapping there.
The Advanced Adapter Engine is a separate software component that is automatically installed on the Integration Server. In this case, it is the central Advanced Adapter Engine. However, you can also install the Advanced Adapter Engine separately on another host. This is then a non-central Advanced Adapter Engine.
cheers
Abhishek

Message Archiving for the Adapter Engine

Hi,
we have configured archiving for Integration Engine (SXMB_MONI) messages on the Production XI System. is it necessary to configure Message Archiving for the Adapter Engine also ? in which scenarios archived adapter messages are useful ? are there any other advantages/disadvantages for this(in case of errored messages on the adapter engine) ? Please share any ideas.
Thanks
Pavan.

>>is it necessary to configure Message Archiving for the Adapter Engine also
Not necessary,but depends upon the scenario,lets say you are posting messages to external partner's FTP and there was some issue in connectivity due to which file was not delivered,in this case you need to send the message again.
same thing can happen in inbound messages too.
>>in which scenarios archived adapter messages are useful ?
i would do this specifically for JDBC sender coz once you pick up the files based upon SQL query,you change the flag so that those values are not picked next time,in this case you can't re-run the old query and get same results.
this also holds for proxies and file too.
Thanx
Aamir

Configuring Process Integration Scenarios for Advanced Adapter Engine

Similar Messages

Maybe you are looking for