Configuring RAS with BRI ISDN.

Hello all,
I have maybe very basic question
but I have studied a lot of guides
about configuring RAS with ISDN interface
but Im not still sure how to build some
reasonable solution.
Could someone help me with this:
1.)what configuration commands I need to connect from Branch to HQ on both routers. Pls no excess configuration commands ..only these I really need.
2.)what commands I need to do backup of my internet connection , for instance serial interface?
BR
jl

Hi,
see the following links :
http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html
http://www.cisco.com/warp/public/793/access_dial/ddr_9347.html
http://www.cisco.com/warp/public/125/fr_isdn_backup.html
http://www.alliancedatacom.com/manufacturers/cisco-systems/dial_backup/backup_dialer.asp
Mehrdad

Similar Messages

BOE XI R2 - Configuring RAS with Service user, RAS Fails to start...

Colleagues:
Where would kbase article c2018785 be found?
I am configuring my BOE XI R2 to use End-to-End SSO via IIS using this document from Business Objects:
Link: [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403cdf46-c63e-2b10-2997-978cb8ba59f0]
In this document, you create a service user under which certain applications run, including the Report Application Server.
There is a specific note on page 6 in the doc which states:
The RAS server may fail to start under this new service account. If you experience this issue, follow the steps outlined in the following kbase:
Link: [http://support.businessobjects.com/library/kbase/articles/c2018785.asp]
Unfortunately, the link is out of date, and I have not found the article using the existing search tools.
I did use the -trace argument to the command line to start up the RAS service, and the output is follows:
Timestamp     ProcessID     ThreadID     Message
[Thu May 07 13:21:39 2009]     4448     4228     (.ashwin32service.cpp:165): trace message: RAS starting
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2039): CDTSApp::InitInstance(): In CDTSParameters::RUN
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2055): CDTSApp::InitInstance(): Starting server. Process Id=4448
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2062): CDTSApp::InitInstance(): setServerParameters() done
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2130): CDTSApp::InitInstance(): initLicenseLimit() returns 1
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3895): CDTSApp::loadServerOptions(): about to SaveToRegistryAsDefault
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3897): CDTSApp::loadServerOptions(): done SaveToRegistryAsDefault hr=-2147024891
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3916): CDTSApp::loadServerOptions(): error Access is denied.
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2134): CDTSApp::InitInstance(): loadServerOptions() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2194): CDTSApp::InitInstance(): getDataEngineName() returns C:TrouxBusiness Objectscommon3.5 incrpe32.dll
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2197): CDTSApp::InitInstance(): openEngine() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2292): CDTSApp::InitInstance(): preloadMSXML() done
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr begins...
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr trying to get Singleton SessionManager.
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize start
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize, start the cluster refresh thread
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2445): CDTSApp::InitInstance(): caught UNKNOWN EXCEPTION!!!
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2461): CDTSApp::InitInstance() returns 0
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:1039): CAgentMapMT::ShutDown - outstanding agents:
[Thu May 07 13:21:40 2009]     4448     4228     (.ashwin32service.cpp:329): trace message: RAS Exiting: return code = 0
In the Windows event viewer, this error is echoed:
Failed to load Report Application Server settings from the system registry.
Detailed Message: Access is denied.
It seems my service account needs a certain permission to be able to load and read the registry for this application, and I'm sure this permission is discussed in the missing kbase article.
Could you please let me know what permission is required for this user on the OS? This is Win2003 x64 SP2.
Thanks, and have a good day

Hi,
if this a permissions problem then just start +regedit*, go to
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
select it, press the right mouse button and choose Permissions. Press the advanced button and assign your service account with full control at this point of the registry. Do not forget to select the +Replace Permissions Entries on all child objects ... + option.
You can also take a look at Notes 1199630 and 1201489 (this one is for CR 10 but it may be worth it to follow the instructions there) ( [https://service.sap.com/notes])
Regards,
Stratos

Configuring RAS and TACACS+. through ACS.

Hi all,
I have very basic question about
configuring RAS with digital modems
and AAA through TACACS+. I use
command peer default ip address pool OLA under interface Group-Async0 and interface Dialer10
for example. And inside router I configure this pool with some range of
IP addresses...for example
ip local pool OLA 192.168.10.2 192.168.10.127.
And I set AAA through TACACS+.
What should I do next on ACS ? Should I configure this pool of IP addresses on ACS or it is sufficient to do it only on router? Or do this on router is not important ?
Thanks
jl

John
I have configured RAS for dial-in services where we authenticated the dial-in users via TACACS and ACS. I did not have to do anything on ACS about the dial pool. The only thing that I had to do on ACS was to configure it to authenticate users whose authentication request came from that router. (In other words nothing special on ACS just because they were dial-in.) Just be sure that your aaa on the router provides for authenticating ppp.
HTH
Rick

Router with BRI interface

i need your support to know model Router with BRI interface

The Cisco 876 (cheapest option) provides ADSL over ISDN
http://www.cisco.com/en/US/products/hw/routers/ps380/products_data_sheet0900aecd8028a976.html
For integrated ISDN BRI, I suggest looking at the 1800 Series
http://www.cisco.com/en/US/products/ps6184/index.html

Does TC work with an ISDN router?

I have a friend with an ISDN internet router with ethernet ports, and a windoz pc.
Now he would like to add a macbook with TC, for TM and wireless internet connection.
Question is simple: does TC works if connected to an ISDN router, or does he absolutely
need an ADSL router?

In fact, I couldn't believe when my country Apple Store told me by phone
"no, the TC cannot be connected to an ISDN modem"....
So I have a new question: the first time, when we need to configure the TC,
we have to connect the macbook with an ethernet cable, right?
We don't want to use the pc to do this task.

Configure Frame-Relay over ISDN

Hi can we configure frame-relay over ISDN can anyone provide me with the details

Hi
Check this link
http://www.cisco.com/warp/public/125/19.pdf
Hope this helps you,
Thanks
Raj

Want to get only 1 BRI ISDN Port,but..

Hi Gurus,
I have a problem here. Currently my router having an empty network module slot. But my company doesn't have budget to get a Network Modules with 4 BRIs Port or diff mixtures of interfaces.
So, is that any network modules that support only 1 BRI ISDN Interface?
thks,
rgds,
ken

Hi ken,
Check this link for 1 BRI ISDN interface details
http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a00800ab515.shtml
Hope u got what your looking for
Thanks
Raj

10g - how to configure sso with iis-

hi, experts, I have followed Oracle® Business Intelligence Enterprise Edition Deployment Guide to configure SSO with IIS.
but I always meet this message.
Not Logged In
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred
what steps are missing?
how to check?

hi, experts,
I checked C:\OracleBIData\web\log\sawlog0.log on the obi server (windows server 2003 standard).
at Thu Feb 17 14:48:46 2011 , I logined OBI on another machine (not via the browser on the obi server).
however, the log shows the login user is the administrator of the obiserver (obiserver\administrator ).
any setup on IIS are wrong? thank you very much!
=========================================================================================
Running job 'MinutelyMonitor' took 7422 milliseconds, 12.3% of job's frequency (60 seconds).
Type: Error
Severity: 40
Time: Thu Feb 17 14:48:46 2011
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-1796
Location:
     saw.odbc.connection.open
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for obiserver\administrator in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Thu Feb 17 14:48:46 2011
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-1796
Location:
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
---------------------------------------

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

Non-configurable materials with EK02 costing

Hi all,
We have a range of non configurable manufactured materials which, when used in standard sales orders, generate a production order and BOM. Presently the cost is automatically generated from the material master and is populated as a VPRS cost.
As these materials have a BOM we want the cost to pick up from the BOM instead, ie as an EK02 cost. If we enter such a material and do a manual recost the EK02 populates in the sales order item conditions but we cannot get it to populate automatically as it does with configurable materials with BOMs.
In the define item categories section in SPRO we have removed the determine cost tick. This has the desired effect of removing the VPRS cost but the EK02 cost still doesn't pull through. In the Bill of Material / Configuration section of the item category we tried setting the structure scope to A (Explode single-level bill of material) and B (Explode multi-level bill of material) but this didn't work. If we set it to D (Configuration, poss. with BOM explosion), then we get the "item can be configured but there is no configuration" error when used in a sales order which is expected as these products have no configuration.
We also tried deleting the standard cost held in the material master to see if, as that value was now blank, it would pick up the EK02 instead but, alas, this also ddn't work.
Any help / suggestions would be most appreciated.
Kind regards, Rob

HI,
We are maintaining the Service masters for the services we render, there is no valuation of Inventory as only service is being rendered.
But we have maintained BOM and Routings for the services we render.
Even there is no valuation class in the serivice masters as this is non valuated.
Can you guide me more on this pls.
Thanks,
Ravi

Create a configurable material with reference to another config material

Hi,
I want to create a configurable material with reference to another configurable material from different system.
Please tell me what data i need to check to see if that material has been created (copied manually) successfully.
Thanks.

Hi,
In case of configurable material most important thing is configuration so please check weather the configuration is copied perfectly with all characteristics or not. Similarly check the valuation class and price control is proper or not.
Regards,
Umesh

Configuring php5 with enable XML on OAS 10.1.3.x

My requirement is to enable XML on OAS 10.1.3.5.
I am not sure how to configure it, so I stated using separate PHP5.2 to configure with XML enable on the server. After installation, when I am starting the opmn services I am getting below error. I think the error with platform. Which means current OS version is 64bit and php5.2 stage is 32bit version I guess.
OAS_HOME=/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS
URL : http://nacisdell277.us.oracle.com:10330/phpinfo.php
I used below command to configure :
./configure prefix=$ORACLE_HOME/php with-config-file-path=$ORACLE_HOME/Apache/Apache/conf --with-apxs=$ORACLE_HOME/Apache/Apache/bin/apxs
with-oci8=instantclient,/u20/app/MSRV1P/apmsrv1p/oracle/product/instantclient_10_2 with-config-file-path=/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/php5--enable-sigchild enable-xml enable-simplexml enable-libxml enable-dom enable-simplexml enable-xml enable-xmlreader enable-xmlwriter enable-simplexml –with-xsl -with-zlib with-xml --with-libxml-dir
Error :
/u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/bin/apachectl startssl: execing httpd
Syntax error on line 247 of /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/conf/httpd.conf:
Cannot load /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/libexec/libphp5.so into server: /u20/app/MSRV1P/apmsrv1p/oracle/product/OAS/Apache/Apache/libexec/libphp5.so: wrong ELF class: ELFCLASS64
I checked in the Metalink for “configuring php5 with enable XML on OAS 10.1.3.x” but I couldn’t find anything.
Please advise me on this.
Thanks

Hello;
You can try installing glibc-devel to fix this.
However on my version :
Application Server Control Release 10.1.2.3.0 - PHP 5 does not seem to work. The conflict on mine is that PHP 4 came wrapped in the Oracle install and they don't play well together.
Make sure your httpd.conf does not have this in it :
LoadModule php4_module libexec/libphp4.soI'm NOT advising you to remove it if its there, I'm merely pointing to a possible conflict.
Best Regards
mseberg
Later
Glad you don't have the same version as me. Hard to find anything on this, found these ( Not exact matches )
http://php.net/manual/en/oci8.installation.php ( Search for ELF )
http://enlinea.creaelicita.cl/guia/oci8.setup.html
http://docs.oracle.com/cd/E17390_01/doc.650/e17370.pdf
Found this in the pdf : ( Similar )
If the following error is received:
*ERROR* - obssocookie: could not dlopen()
/opt/netpoint/AccessServerSDK//oblix/lib/libobaccess.so:
/opt/netpoint/AccessServerSDK//oblix/lib/libobaccess.so: wrong ELF class:
ELFCLASS32
This indicates that the 32-bit version of the Access Gate SDK was installed instead of
the required 64-bit version. Edited by: mseberg on Feb 4, 2012 5:53 AM
Still later
Another thought is the PHP forum :
PHP
Also you need the 32bit Instant Client to be able run PHP. See http://blogs.oracle.com/opal/entry/using_php_oci8_with_32-bit_php
Same OS message :
ORA-03106: fatal two-task communication protocol error
Edited by: mseberg on Feb 4, 2012 7:03 PM
Rogue Notes from my Fusion Middleware on Red Hat 5 64 bit
I downloaded php-5.3.5.tar.gz from http://www.php.net/downloads.php.
Download the OCI headers http://www.oracle.com/technetwork/middleware/ias/ociheaders-134541.tar
environment
export ORACLE_HOME=/u01/app/oracle/product/fmw/oracle_pfrd
export ORACLE_INSTANCE=/u01/app/oracle/product/fmw/fr_inst
export CONFIG_FILE_PATH=$ORACLE_INSTANCE/config/OHS/ohs1
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/ohs/lib:$LD_LIBRARY_PATH
Configure with Oracle Database (OCI8) support:
./configure with-apxs2=$ORACLE_HOME/ohs/bin/apxs prefix=$ORACLE_HOME with-config-file-path=$CONFIG_FILE_PATH with-oci8=$ORACLE_HOME --disable-rpath
httpd.conf
# And for PHP 5.x use:
AddType application/x-httpd-php .php .phtml
Edited by: mseberg on Feb 4, 2012 7:19 PM
Edited by: mseberg on Feb 5, 2012 11:48 AM

Server app : random errors in configuration applied with configuration profile

When I verify the informations contained in the user configuration profile with both the profile manager and textmate everything is ok. When i installs the configuration profile on a computer there are errors in the configuration of Mail app the email address is configured as follows: [email protected] instead of: [email protected] and username is: [email protected] instead of : user1 . Both server and client computers are on running mac os x 10.8.
thanks for the help !

When I verify the informations contained in the user configuration profile with both the profile manager and textmate everything is ok. When i installs the configuration profile on a computer there are errors in the configuration of Mail app the email address is configured as follows: [email protected] instead of: [email protected] and username is: [email protected] instead of : user1 . Both server and client computers are on running mac os x 10.8.
thanks for the help !

Configuration problem with external Western Digital My Book 2 TB drive

How do I fix a configuration problem with my external Western Digital My Book 2 TB drive which used to both read and write. Something has happened so that the drive is now read only? There is 600 GB of data on the drive that I cannot lose, thus am very concerned about messing around with formatting the drive which is raid 1 and filled with data.

may not like to hear, but I'd skip on MyBook cases, nice looking as they are.
Get a 2nd drive case to recover to.
http://www.macsales.com/firewire
may need to play with the demo Data Rescue 3 from Prosoft
Backup/recover before repair is usually in order
never have one backup set. THREE sets of your data, minimum.
3rd party disk maintenance and repair should be a must and given rather than rely solely on Apple Disk Utility.
Data and system maintenance and recovery plan - should be like practice for sports, arts, military with practice and making sure you will know how and the tools you need - ahead of time
Resetting USB/FW ports, try another if one won't work. When 10.6 came out there was a lot of grinding teeth with external drives not working or mounting.

How can i configure STMS with out physical systems

Dear Experts ,
please solve my doubts
here i installed one system in AIX and named it as DEV system in that system i need to perform post-installaion Activities
and i started some activities also
presently my doubt is in STMS configuration
here i have only one system (DOMINE CONTROLLER) and we need to other systems while configuration but we dont have other systems like quality and production how can i configure that systems in my landscape
this is my first implementation Experience please suggest me with some valuable suggestions
my doubts:
while creating systems we need to take for virtual systems or Extended systems
which transport routes can i prefer for Dev to Qly systemand also Qly to Prd
please reply me
Regards

Hi,
If you have decided the SID's of the QUA and PRD systems then you can configure TMS with the virtual systems. Here are the steps to do so.
Login to the domain controller
Execute tcode STMS
Goto the menu overvie --> systems (Shift+F6)
SAP SYStems --> Create --> Virtual system
Enter the SID and description and then save ur entries.
Now the new virtual system will be created. Do the above for the others systems in the landscape.
Again execute STMS and then click SHIFT+F7. You will goto the transport route window. Now you can configure TMS for the systems in the list as usual.
Hope this helps.
Regards,
Varadharajan M

Configuring RAS with BRI ISDN.

Similar Messages

Maybe you are looking for