Configuring recevier XI adapter

Hi
I am working on server abap proxy. When configuring receiver XI adapter its asking for authentication data. which user id and password do i need to specify. Is it XI system super user id and password or receiver SAP system userid and password. Could you please clarify me.
Regards
Sowmya.

Hi Soumya,
The Authentication details(uid and pwd) are receiver SAP system details.
Reward points if this helps
Regards
Pragathi.
Edited by: Pragathi on May 23, 2008 4:28 AM

Similar Messages

How to Configure Receiver Mail Adapter?

I need to designed a BPM if Message is failed to update database then send an e-mail to alias group in Microsoft outlook by using Receiver Mail adapter.
Can someone help me to design above BPM and how I need to configure receiver mail adapter.
Thanks in advance!
Mrudula

I am getting <Trace level="3" type="T">Unknown channel type: Mail</Trace> when it tries to call "MAIL" adapter.
Does anyone has any clue where should I look?
Thanks!
Mrudula
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: Mail</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

Getting error when configured sender mail adapter

Hi Everyone,
When i tried configuring sender mail adapter am getting these logs in Runtime workbench.
In ID,when i gave ip address in place of URL, am getting this log
"exception caught during processing mail message; java.io.IOException: unexpected password response; read -ERR Logon failure: unknown user name or bad password."
When i gave URL in place of URL, am getting this log
"exception caught during processing mail message; java.net.UnknownHostException:"
why is it giving this log, What correction i have to do to make it work.
Thanks in advance,
Sakthi

Hi,
<i>1.How to stop deleting mails.</i>
When the IMAP4 protocol is used, we get an option "Delete messages when read".You could specify if you need to delete it or not.
<i>2.How to do mapping for an attachment,what additional things i have to do for this.</i>
Could you please elaborate?
<i>3.Is there any option to change the flag of mail once it is read by XI.</i>
You cannot do this from XI. You would need to do it in your email client. In case you are using IMAP4,you could mark the message as read, once XI reads the unread message.
Regards,
Smitha.

How to configure sender mail adapter

Hi,
My scenario Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
and can anyone suggest any blog as how to configure sender mail adapter.
Kindly help
Anu Singhal

Hi Anu,
Just check this link
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
and this 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Rewardif helpful
Reagards
Sachin

In my Scenario i want to configure file sender Adapter.But in Parameters

In my Scenario i want to configure file sender Adapter.But in Parameters, for Adapter Engine Column It Shows blank,Integration Server will not appear for that column.Finally It Gives Error- Adapter Engine is not Defined.
What is the Reason for this...
Please Clarify ASAP...
Thanks..

Hi Chiru,
      It seems that you may have missed some steps while doing the configuration. After doing all the activities in SLD and IR and activating all the components created in IR it should work.
      Plz check that you have selected as Adapter Type as File and correct namepace in the next field. Transport Protocol as File System (NFS), Message Protocol as File and I hope after all these information you will get Integration Server in the Adapter Engine field.
    If the problem persists please revert back.
Warm Regards,
Subhasha Ranjan

How to Configure Microsoft loopback adapter in windows 2008

Hi all,
I am trying to install SAP IDES 6.0..... while i m trying to install it , it is asking forUnlimited Strength Jurisdiction Policy Files at runtime.
I do have local and US policy jar file, but i guess its asking for JCE extension file, i dont know about it. so i m not able to proceed
further. it gives osme error about local host. i think its about Microsoft loopback adapter. can anyone have idea abt it.How to
Configure Microsoft loopback adapter in windows 2008?
Can anyone help me ASAP coz i m stucked like anythng.
thanks
Cheers

Hi vinay
Thanks for reply...I m Installing SAP IDES...with DB2
I have upload JCE zip file...after clicking next button i m getting following Errors,
ERROR 2014-10-02 09:52:29
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2014-10-02 09:52:29
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
i guess its about Loopback adapter configuration. Still i m not sure... DO u have any idea about it.
How i can get rid of it.
Thanks

Configuration of JMS Adapter in Central Adapter Engine

Hi all,
I have configured Sender JMS Adapter in Central Adapter Engine with the following parameters:
Adapter type : JMS
Transport Protocol : WebSphere MQ (non-jms)
Message Protocol : JMS1.x
Adapter Engine : Integration Server
Queue Connection Factory java class :Com.ibm.mq.jms.MQQueueConnectionFactory
Queue java class : com.ibm.mq.jms.MQQueue
ipadd : localhost
port : 1414
Queue Manager name : TEST.QMGR
Channel Name : CH1
JMS Queue : LQ
CCSID : 437
Protocol : TCP/IP
JMS-compliant : WebSphere MQ(non-jms)
JMS Queue user : MUSR_MQADMIN
Mapping of message : Entire Message = JMS Payload
But the status is red with an error message Sender Details : NULL
Could you please tell me what went wrong?
Regards
Sathya

Hi,
Make sure that Websphere MQ server is running.
If u r comfortable with java, you can even write a Java code to acces the server and check if the JMS server is working fine. Some times there will be sample applications provided by Websphere MQ itself.
Once the java program works then it will be easy to debug the error over here.
Regards,
P.Venkat

Configuring the SOAP Adapter

Hi Folks,
I have a sceanrio where an AXIS client needs to talk to the XI SOAP Adapter.
How do I configure the SOAP adapter?
I tried to access the help docs for configuring the SOAP adapter. I understand that the adapter depends upon the plain J2SE Adapter Engine which should be available on port 8000.
But when I try to access
http://<hostname>:8000 I get an access denied error
Please help!
Thanks in advance,
Shailesh

Hi Shailesh,
Maybe your 8000 Port is in Use. So you can chance the port to 8200 or something else.
You Change port in "GUIBrowserEngine.properties" file.
And try to patch the Plain J2SE Adapter Engine with "SP 10 for XI Connectivity SE 3.0"
Regards,
Robin

How to configure Sender IDOC adapter

Hi could someone pls guide me on the steps that i need to take to configure IDOC sender adapter..
Are the steps for Sender and Receiver IDOC adapter same other than the fact that sender idoc adapter doesn't need a sender communication channel.
Regards,
Ashish

hi Goyal,
Just check out this link.
How to Configure IDOC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards
Sachin

How to configure reciever mail adapter

Hi All,
I have gone through your weblog for configuring reciever mail adapter BY PRASAD ULAGAPPAN.
I have few doubts .
Message protocol ==      XIALL.
If I am providing my mail address in MAIL ATTRIBUTES-TO parameter
then what do we have to exactly specify in connection parameters.
I want to send a mail from XI to my ID. Suppose my id is [email protected] .
So if I am providing this ID in " TO " parameter then what should I specify in connection parameters
i.e       url = ?
           user = ?
           password = ? (which password to specify , usually we dont require to give password to recieve mails )
Please help me with this.
Waiting for your reply.
Thanks in advance

Hi Yomesh,
The below help URL gives explanation for 'Connection Parameters for Mail Server':
http://help.sap.com/saphelp_nw04/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
You need to provide your mail server details. When you send a mail normally, say from outlook, you configure it to connect to some SMTP/IMAP server, using username/password.
Provide that server details in URL.
If you dont use user/password to connect to it, leave it blank.
Also fill the 'From' mail address.
For eg., if there is a internet connectivity to your XI server, and you want to use SMTP server of yahoo to send out mails, then you can give:
URL: smtp://smtp.mail.yahoo.com
userid: yomeshsharma
password: <your yahoo password>
In this case, both your From & TO details are same.
You can change 'TO' to send to a different mail address.
regards,
Pops V
Message was edited by: Pops V

How to configure an jms adapter to use ActiveMQ?

Does anyone have an example of how to configure an jms adapter of oracle esb
for third party JMS provider to use ActiveMQ?
I had done something as follow:
1、add activemq shared-library in $SOA_INSTANCE/config/service.xml
2、config a jms adapter fro third party use paramter:
     java.naming.factory.initial     org.apache.activemq.jndi.ActiveMQInitialContextFactory
     java.naming.provider.url     tcp://10.20.30.26:61615
but I got a error:ERRJMS_CONN_FAC_NOT_FOUND.
Caused by: javax.naming.NameNotFoundException: org.apache.activemq.ActiveMQConnectionFactory
     at org.apache.activemq.jndi.ReadOnlyContext.lookup(ReadOnlyContext.java:225)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at oracle.tip.adapter.jms.JMS.JMSFactory.jndiLookup(JMSFactory.java:237)
     at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:138)
     ... 51 more
what should I do? can someone give me a detail resolvent?

I also had done as follows:
1、add activemq shared-library to shared-library named "oracle.esb" in server.xml :
<shared-library name="oracle.esb" version="10.1.3">
          <import-shared-library name="apache.activemq"/>
</shared-library>
2、add in $SOA_INSTANCE\j2ee\soa\application-deployments\default\JmsAdapter\oc4j-ra.xml
     <imported-shared-libraries>
          <import-shared-library name="apache.activemq"/>
     </imported-shared-libraries>

How to configure the jms adapter

hi all,
i got some trouble trying to configure de JMS adapter, i 'd be glad if some colud give me a hand with this. i'am wordering if there is a complete document about this topic to help me out with de configuration.
thk u all very much.
Regards, Pablo

Hi,
The below URL will help you to understand what is JMS, how to configure and do a testing.
http://learn-oraclesoa.blogspot.co.uk/2013/04/oracle-jms-adapter-tutorial.html
Below will help you to configure the JNDI for JMS
http://manojm-nair.blogspot.co.uk/2013/02/configuring-connection-jndis-for-jms_13.html
Thanks,
Vijay

How to configure RFC receiver adapter

HI,
I have a Proxy-to-RFC scenario. But I have no knowledge in RFC receiver adapter. Could you please provide me the step-by-step guideline or sample about how to configure RFC receiver adapter.
Thanks in advance.
Best regards, Johnney.

Hi,
Refer these links which will help you understand the concept and configure the Scenario.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
The specified item was not found.
Refer this blog for synchronous scenario
RFC Scenario using BPM --Starter Kit
Sender RFC Adapter:
The specified item was not found.
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> file scenario: application stopped
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfctofile&cat=sdn_all
RFC to file
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Send RFC to SAP XI Asynchronous
The specified item was not found.
ABAP Proxies in XI(Client Proxy)
Regards,
Nithiyanandam

Configuration of JMS adapter Using WebSphereMQ

Hi All
I am trying Http to JMS scenario.
I configured my JMS adapter as receiver
Trasport protocol: Web sphereMQ JMS provider.
Queue Connection Factory : com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java class : com.ibm.mq.jms.MQQueue
IP address : 172.17.50.150Where I installed Web Sphere MQ
In SXMB_MONI my http client sends msg without any error
But In runtime work bench whn I observe Adapter monitoring I got error as
Receiver channel. Details: MQJMS2005: failed to create MQQueueManager for '172.17.50.150:QM_APPEL'
PLZ ell me d coz
Thanks

Hi,
for the configuration of a Websphere MQ JMS adapter, you will have to also give details like, Queue Manager Name, channel name, etc.
Just check this link for the same,
http://help.sap.com/saphelp_nw04/helpdata/en/c1/739c4186c2a409e10000000a155106/content.htm
Provide all the correect details and it will hopefully work.
Regards,
Bhavesh

Configuration for JMS Adapter Sensor action and JMS Queue sensor action..!!

Hi,
Id like my BPEL process to send an XML message to JMS on Websphere,I was able to do this through a JMS adapter.But I would more like to add sensors into my process which would really do the same thing - send an XML message to JMS Q.
Now I understand that there are two ways to do this,JMS Queue and JMS Adapter - thorugh bpel sensor action.
I am able to use JMS Queue and it works fine , but adds its own xml tags to the message,Is there any way I could send only my xml payload as a message to the queue??
Also could any1 tell me what is the configuration for JMS Adapter sensor action?
Any suggestions how do I go about it??

Hey Anirudh,
Thanx for the response :-)
All these hold good when I have an AQ adaptor right,But the thing is I want to send a message to a 'JMS' queue with out actually using an adapter configuration wizard and everythng..So I resolved to JMS queue Sensor action..Heres the xml snippet from the sensorAction.xml files which is generated..
<actions targetNamespace="http://xmlns.oracle.com/Test_JMS_Logging" xmlns="http://xmlns.oracle.com/bpel/sensor" xmlns:tns="http://xmlns.oracle.com/Test_JMS_Logging" xmlns:pc="http://xmlns.oracle.com/bpel/sensor">
<action name="JMS_LogEntry" publishName="" publishType="JMSQueue" enabled="true" filter="" publishTarget="jms/L_Queue">
<property name="JMSConnectionFactory">jms/L_QueueCF</property>
<sensorName>ActivitySensor_JMS</sensorName>
</action>
</actions>
This works grt and adds messages to the queue..But adds its own header info according to the sensor.xsd loacted at the Oracle_home\bpel\system\xmllib\ folder.
Right now the XML message added to the Queue is:-
<actionData xmlns="http://xmlns.oracle.com/bpel/sensor">
<header>
<sensor sensorName="ActivitySensor_JMS" classname="oracle.tip.pc.services.reports.dca.agents.BpelActivitySensorAgent" kind="activity" target="AddLEntr
y" xmlns:pc="http://xmlns.oracle.com/bpel/sensor" xmlns:ns2="http://www.ulrhome.com/2008/10/L_Entry" xmlns:tns="http://xmlns.oracle.com/Test_JMS">
<activityConfig evalTime="completion">
<variable outputDataType="string" outputNamespace="http://www.w3.org/2001/XMLSchema" target="$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName"/>
</activityConfig>
</sensor>
<instanceId>950016</instanceId>
<processName>Test_JMS</processName>
<processRevision>v2009_04_15__40833</processRevision>
<domain>default</domain>
<timestamp>2009-04-15T11:21:23.596-04:00</timestamp>
<midTierInstance>app01.ulrhome.com:9700</midTierInstance>
</header>
<payload>
<activityData>
<activityType>scope</activityType>
<evalPoint>completion</evalPoint>
<durationInSeconds>0.011</durationInSeconds>
<duration>PT0.011S</duration>
</activityData>
<variableData>
<dataType>12</dataType>
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
<queryName/>
<target>$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName</target>
<updaterName>AddL_Entry</updaterName>
<updaterType>scope</updaterType>
</variableData>
</payload>
</actionData>
My requirement is that I need to add a sensor to the BPEL process which posts 'Only my payload message to the JMS queue'..
What I would want the message in the Queue to be is : -
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
Also while creating a Sensor action I get another option as JMS Adaptor,I am not sure of what value to type in this wizard..Heres what I keyed in..M sure this is not right..Cos it dosnt work :-)
<action name="SensorAction_JMS" publishName="" publishType="JMSAdapter" enabled="true" filter="" publishTarget="jms/LoggingQueue">
<property name="JMSConnectionName">Log</property>
</action>
</actions>
Could any 1 tel me what values are the right values..And does JMS Adapter mean that I have to create a JMS Apator in the project and give that connection name as a Value..
I am not finding sufficiant Documentation for 'JMS Adapter' so M clueless and right now any help will be appriciated :-)
Regards,
Akshatha.

Configuring recevier XI adapter

Similar Messages

Maybe you are looking for