Configuring Report Server after DNS change

Hello everyone,
I am encountering the following problem:
We have a Sharepoint 2013 server with Reporting Service integrated mode. Everything went fine. Now I have changed the DNS in the alternate access mapping. After that, when users want to create a new report (over the new URL) by opening Report Builder in Sharepoint
it won´t open. The error message is talking about an authentification problem 401 and System.Deployment.Application.DeploymentDownloadException (unknown subtyp).
Can anyone help me solving this issue?
Kind regards,
Robin

Check if below helps
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/e0f6e373-ca72-407c-8965-3699db0acebb/application-installation-did-not-succeed-remote-server-returned-on-forbidden-error403?forum=sqlreportingservices
Anonymous authentication is not enabled in that. i enabled that(IIS-ur web application-authentication)
http://www.sqlservercentral.com/Forums/Topic780464-150-1.aspx
problem in config file of the report server / service
http://stackoverflow.com/questions/9157034/error-when-starting-report-builder-what-is-the-reason
SSL certificate issue
http://social.technet.microsoft.com/Forums/en-US/607bfe78-756f-4cf3-867e-026dbc4a878a/report-builder-from-within-sharepoint-2010-fails?forum=sharepointadminprevious

Similar Messages

How to configure report server in 9iDS

I am usin P4 and trying to configure report server for 9iDS. But, surprisingly there is no conf file in the \orant\reports\server path after complete installation of 9iDS.
How should I configure the report server?
Take care,
Tarek

tarek,
we released a new whitepaper last week about configuring the reports services with iDS for testing your reports. you can find this whitepaper in the reports section here on OTN.
however. you can either create the reports config file manually or it is created automatically for you if you start up a server and there is no corresponding config file already defined.
regards,
philipp

Configuration Manager 2012 R2 - SRS Reporting Services not configuring Report Server

Hi all,
I am running stand-alone primary site and remote (shared) SQL 2012 SP1 on Windows 2012 R2 Standard. Remote SQL server is currently hosting multiple instances and Configuratoin Manager is running on a custom instance. SCOM databases also co-exist on the same
SQL environment (different instance with SSRS installed & running perfectly).
After setting up the Reporting Services role on Configuration Manager environment, srsrpsetup.log & srsrpMSI.log states installation is successful. However, when monitoring srsrp.log file, we encounter the below message -
SMS_EXECUTIVE started SMS_SRS_REPORTING_POINT as thread ID 5232 (0x1470).
SMS_SRS_REPORTING_POINT 02/12/2014
07:44:00 7828 (0x1E94)
This is a SRS Reporting Point Role as SRSRP registry key exists.
SMS_SRS_REPORTING_POINT 02/12/2014 07:44:15
5232 (0x1470)
Waiting for changes for 0 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check state SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Check server health. SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Registry change SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
02/12/2014 07:44:15 5232 (0x1470)
Timed Out... SMS_SRS_REPORTING_POINT
02/12/2014 07:45:15 5232 (0x1470)
Steps taken so far -
1. Switched reporting services to run from local system account to domain account.
2. Created new Report Server database on our instance and reconfigured Reporting Services to this DB.
3. Un-installed and re-installed Reporting Services role in Configuration Manager
4. Un-installed and re-installed SSRS on Configuration Manager (dedicated) SQL instance after removing Reporting Services role in CM12.
I have referred couple of links on forum and none seem to help resolve this issue.
Let me know if there is anything specific I missed out from my end. Appreciate any assistance.
Regards,
mittu

It seems that Reporting Services for SCOM and SCCM cannot co-exist on the same server (it sounds like a bad idea anyway)
http://www.systemcentercentral.com/system-center-2012using-a-common-sql-backend-database-sysctr-scom-scsm/
https://social.technet.microsoft.com/Forums/en-US/7e6b5ae9-04c8-4c5d-a77f-9f5208d4e65f/is-it-possible-to-deploy-2-scom-2012-r2-reporting-in-a-sql-server-which-already-has-scom-reporting?forum=operationsmanagerreporting
https://social.technet.microsoft.com/Forums/systemcenter/en-US/0332b156-bc36-4699-8775-a561915f35ab/scom-2012-reporting-components-with-a-shared-sql-cluster?forum=operationsmanagerdeployment
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Error while configuring report server

Hi,
I configuring a 10gr1 report server ( midtier).
In the configuration file , when I give the repository username and password..
<!--jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
<property name="repositoryConn" value="repo_db_username/repo_db_password@repo_db_tnsname" confidential="yes" encrypted="no"/>
And try to restart the report server , it does not come up. Are there any additional configuration change to make for this to work.
I am able to connect to the username through sqlplus.
Thanks

In the OC4J~OC4J_BI_Forms~default_island~1 log
09/03/04 13:26:23 Start process
09/03/04 13:26:25 FormsServlet init():
configFileName: /u01/app/oracle/OraHome/midcrd01/forms/server/formsweb.cfg
testMode: false
09/03/04 13:26:25 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
09/03/04 13:26:40 ListenerServlet init()
09/03/04 13:26:45 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:27:09 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:27:32 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:27:35 Stop process
09/03/04 13:27:36 Shutting down...
09/03/04 13:27:39 Start process
09/03/04 13:27:41 FormsServlet init():
configFileName: /u01/app/oracle/OraHome/midcrd01/forms/server/formsweb.cfg
testMode: false
09/03/04 13:27:41 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
09/03/04 13:28:01 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:28:25 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:28:40 ListenerServlet init()
09/03/04 13:28:48 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:28:51 Stop process
09/03/04 13:28:52 Shutting down...
09/03/04 13:28:53 Start process
09/03/04 13:28:55 FormsServlet init():
configFileName: /u01/app/oracle/OraHome/midcrd01/forms/server/formsweb.cfg
testMode: false
09/03/04 13:28:55 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
09/03/04 13:29:16 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:29:40 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:29:40 ListenerServlet init()
And in the opmn log I have :
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting

Problem in configuring Reports Server. Error-186

Dear All,
I have Developer6.0 on Windows NT with service pack 3 applied.
Problem is that the Report Server is not getting configured as an NT service .
after typing
rwsmts60 -install repserver
a Service is created in the Win NT Services
when I try to start
( I have a default printer )
the following error comes :
"The Oracle Reports Server (repserver )
service returned service specific error
186"
Secondly I tried not to use NT service
by
rwsmts60 -listen repserver
It gives the error
"REP-0186: Daemon failed to listen to port"
My Tnsnames.ora entry is
repserver.world = ( ADDRESS = ( PROTOCOL = TCP ) ( Host = 10.5.0.77 )
( Port = 1949 ) )
I tried different port no.s but still the error persists.
The report server and the OAS is on the same Machine and database is on a separate machine
I am following the White Paper at http://technet.oracle.com/products/reports/pdf/A55143.pdf
Thanks,
Rajat
null

did you ever get this resolved? I have the same problem. [email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ajayb1():
Dear All,
I have Developer6.0 on Windows NT with service pack 3 applied.
Problem is that the Report Server is not getting configured as an NT service .
after typing
rwsmts60 -install repserver
a Service is created in the Win NT Services
when I try to start
( I have a default printer )
the following error comes :
"The Oracle Reports Server (repserver )
service returned service specific error
186"
Secondly I tried not to use NT service
by
rwsmts60 -listen repserver
It gives the error
"REP-0186: Daemon failed to listen to port"
My Tnsnames.ora entry is
repserver.world = ( ADDRESS = ( PROTOCOL = TCP ) ( Host = 10.5.0.77 )
( Port = 1949 ) )
I tried different port no.s but still the error persists.
The report server and the OAS is on the same Machine and database is on a separate machine
I am following the White Paper at http://technet.oracle.com/products/reports/pdf/A55143.pdf
Thanks,
Rajat
<HR></BLOCKQUOTE>
null

Create and configure reports server in Oracle 9iAS 1.0.2.2.2 on solaris 10

Hi All,
I have installed Oracle 9iAS 1.0.2.2.2 on Solaris 10. I want to create and configure a new reports server.
Please help as I can't see anything on metalink.
Thanks/Regards
Dirish

In fact when installing 9iAS 1.0.2.2.2, the default report server name looks like this REP60_TEST.INTNET.MU.
My original tnsnames.ora was like this
REP60_TEST.INTNET.MU =
(ADDRESS = (PROTOCOL = tcp)(HOST = test.intnet.mu)(PORT = 1950))
I added an alias to the tnsnames.ora file
now my tnsnames.ora is like this
REP60TEST,REP60_TEST.INTNET.MU =
(ADDRESS = (PROTOCOL = tcp)(HOST = test.intnet.mu)(PORT = 1950))
This is working fine
Thanks

Configuring Reports Server 10g 10.1.2.0.2

hi all,
I have installed App server 10g 10.1.2.0.2 and i have started the Reports server also. now i want to create one sample report and i want to run that report from a form or menu. Is there any configuration? how to do that? and if any sample code is there then send me please.
Thank you,
Regards,
Kalyan

HI All,
And the patch set 4505133 10g Release 1 (10.1.0.5) Patch Set for Linux x86-64 is not supported for RED HAT ES 5.
Can I still continue to install the this patch for dabase 10.1.0.5? The patch # 5983622 says we must install the 10.1.0.5 patch. Please help me urgent!.
Thanks

How to configure report server in 11g ???

hello experts,
i installed the 11g recently. and start converting the 10g form and report successfully.
i start the web logic service. and my application is running.
in 10g i was running the report from form. but same form is using to call the report
below error is comming.
error: frm 41213: unable to connect report server repsrv1
before call the report i start the web logic service: wls_reports
note: in 10 g i was using the server name as : repsrv1
please help me to find the solution.
thanks
yash

hello,
i tried to access the showjobs but its not accessed.
we installed the 11f g one day before. may be we do not configure the report server.
please help me how to confiogure it?
i am accessing the forms with url:
http://192.168.1.1.2:9001/forms/frmservlet/....
but when trying to access reports server
http://192.168.1.1.2:9001/reports/rwservlet/showjobs
its showing error:
404: not found
thanks
yash

How configure Report Server

Hello everybody,
I have just installed Developer 10.
Yesterday, I made a report JSP from JDeveloper with the Report Builder, but when I execute the page with the local OC4J Server, the page crashes:
javax.servlet.jsp.JspException: REP-51002: Fail to link to Reports Server central.cie
'central.cie' is the server where i have installed the database and the Oracle9iAS. In fact, I access to the Oracle Enterprise Manager with central:7777
The DB Connection is all right, but I don't know which is
the Report Server.
I don't know how configure the Report Server, if I must deploy in the Oracle Enterprise Manager or if it has one by default.
Please help me as soon as possible because I'm in a hurry. Next week I have a presentation of my project and It's only left the reports.
Thank you very much.

1) >>>> but when I execute the page with the local OC4J Server <<
Did you test the report from within builder ? In builder there is a "run to web layout" (a traffic light icon in toolbar). Clicking on it will run the JSP report to web
2) Docs -
see below
In your case see "Publishing reports to web" document.
3) Setup "trace" options for JSP and see in the log files what error you get. Please post them here
In the above document see section 3.3.5
4) Please see in the document the steps to run to JSP
Section 13.1.2
Just to see if you have missed anything
http://web_server.domain_name:port/alias/myreport.jsp?parameters
5) In your BI Reports and FORMS Midtier (Not Infrastructure install) by default there should be a report server running by the name
rep_hostname
For trouble shooting purposes , run a standalone server in the midtier
rwserver server=<any name>
and give
http://web_server.domain_name:port/alias/myreport.jsp?server=server_name&other params
Thanks
Ratheesh
[    All Docs     ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf

How to configure report server in 10.1.2

Hi all,
I have 10gDEV,AS10G and AS infrastructure on my system.I want to issue the following command to install report server but it is not working "rwserver -install reptest" ..... Any body know how I install this server in 10.1.2.0.2 Rel of 10g...Any idea?????
Regards

You don't specify your OS, anyway see http://download.oracle.com/docs/cd/B14099_19/bi.1012/b14048/pbr_strt.htm#sthref104
where you can see
Beginning with Oracle Reports 10g Release 2 (10.1.2), running Reports Server as a Windows service is no longer supported (rwserver -install server_name).

Frozen process on report server after killing user process

Hi,
I've following problem. When user kill request(user process on PC) on creating report during process
(PDF file, report server 10g), the process on OAS stay frozen and nobody is able to create own report. When we use for creating report(PDF) Adobe destiller it was OK, but in this time we use options in ORACLE Report for creating PDF
Ivan

Primary Server Listener File
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.200)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = jsl)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = jsl)
Standby Listener File
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.201)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = jsl)
Thanks & Regards
Vijayaraghavan K

Can't configure Reporting Services after installation

Environment: SQL Server 2008 R2 Reporting Services Enterprise on Windows Server 2008 R2 Enterprise
Reporting services was installed for me by admins with "install but don't configure" option. My domain account is a member of local administrators group, but when I open Reporting Services configuration manager, I can't go to any of the tabs
other than the Service Account one. The Web Service URL and Database tabs are grayed out and inaccessible.
Any ideas?
thx!
-Peter

Hello,
In addition to above: make sure that Exchange 2013 is installed correctly. Check Exchange installation logs and run the Get-ExchangeServer command using Exchange Management Shell on the new server. You should see both Exchange 2010 and Exchange 2013 servers.
Hope it helps,
Adam
CodeTwo: Software solutions for Exchange and Office 365
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.

UCCX 8 update license after DNS changes

Hi! I changed UCCX domain name and now I have to resite license for changes. How can I resite license file? Why I should resite license every time when I do some changes with DNS/IP-address in UCCX?

How can I resite license file?
Open a case with Cisco TAC to have the license rehosted.
Why I should resite license every time when I do some changes with DNS/IP-address in UCCX?
Cisco is moving the products to a host configuration-based licensing key since virtual machines do not have hardware MAC addresses so to speak.
http://docwiki.cisco.com/wiki/License_MAC_Generation

I use Iplanet web server and my question is, once I make changes to my java file, is it necessary to restart the server after every change to the file(java)??

Hi,
In your iWS, Go to particular instance config directory
edit contexts.properties file
(eg:-/usr/netscape/server4/https-test/config/contexts.properties).
Do the below changes.
(uncomment
context.global.reloadInterval=5
"And"
context.global.isModifiedCheckAggressive=true).
Example:-
~~~~~~~~~~~
# Context properties:
# context.global.sessionmgr=com.netscape.server.http.session.SimpleSessionManager
# context.global.sessionmgr.initArgs=
# context.global.initArgs=initial=0
# context.global.realPathFromRequest=false
# context.global.respondCookieVersion=0
# context.global.sessionExpireOnClose=false
# context.global.includeTransparency=true
# context.global.tempDir=/tmp
context.global.reloadInterval=5
# context.global.javaBufferSize=0
# context.global.bufferSize=4096
# context.global.docRoot=/foo/bar
# context.global.inputStreamLengthCheck=true
# context.global.outputStreamFlushTimer=0
# context.global.uri=/
# context.global.host=
# context.global.ip=
# context.global.authdb=default
# context.global.classpath=
# context.global.singleClassLoader=false
# context.global.contentTypeIgnoreFromSSI=true
# context.global.parameterEncoding=utf8
# context.global.sessionCookie=NSES40Session
context.global.isModifiedCheckAggressive=true
I hope this will work for you.
Thanks,
Daks.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Install/configure admin server after installing weblogic

I have installed weblogic generic 10.3 in my windows 7 professional machine and configured OIM. But I did not configure the Admin server. I tried starting the OIM & SOA server by using
C:\......\bin>startManagedWebLogic.cmd soa_server1 http://localhost:7001
but I got this error
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
<> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
SEVERE: Authentication of user weblogic failed because of invalid password
<> <Critical> <Security> <BEA-090403> <Authentication for user weblogic denied>
<> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
weblogic.security.SecurityInitializationException: Authentication for user weblogic denied
So how do I install/configure the admin server. I am sure I am missing something simple. Any help would be appreciated. Thanks.

You are checking at the wrong place.you need to check the same under DOMAIN_HOME which would be by default at $MIDDLEWARE_HOME/user_projects/domains/<<Your DOmain Name>>
e.g. if WL_HOME=/oracle/Middleware/wlserver_10.3
then
MIDDLEWARE_HOME=/oracle/Middleware
and DOMAIN_HOME=/oracle/Middleware/user_projects/domains/SOA_DOMAIN <---THere should be Domain Name folder existing>>
Under the domain folder you would be having startWebLogic.sh which is used to start the Admin Server.
And moreover under DOMAIN_HOME you would have config folder in which you would have config.xml where from you can check which all the server you have in your domain which you have created.

Configuring Report Server after DNS change

Similar Messages

Maybe you are looking for