Configuring Sender SOAP Adapter

Hi, I am trying a simple scenario that worked well in XI 2.0 and I am trying to migrate the same scenario to XI 3.0 where I am having problems.
1. Created two data types: material_in that takes a material; material out that have three simple elements (description, type, and group).
2. Created two message types one for the inbound and other for the outbound
3. Created a message interface linking the outbound and inbound messages type outbound and synchronous.
4. Created all the mappings necessary that maps the material to a RFC-enabled Function module and the output of the function module is mapped to out message.
5. Then created the configuration part (Integration builder - configuration ) using configuration wizard.
6. The communication channel for the sender Business systems is SOAP where the default interface parameters have been provided
7. The communication channel for the receiving business systems is RFC.
The configuration wizard has created all the necessary steps including receiver determination, interface determination, sender and receiver agreement.
I activated all the components. Then using 'Define Web Service', created a WSDL file. I have imported this WSDL file into XMLSPY to test it out.
This is where I am hitting the wall.
When I tried using http://host:javaport/XISOAPAdapter/MessageServlet?channel=
URL, I am getting a http post error (500).
Then, I tried posting to http://host:port/sap/xi/engine?type=entry. This creates an XML message in the XI but comes back with an error 'RCVR_DETERMINATION.MESSAGE_INCOMPLETE'.
Any thoughts from your side is greatly appreciated.
Thanks, Ram Rayavarapu

Hi Ram,
sounds all ok, any more information on the 500?
The http://host:javaport/XISOAPAdapter/MessageServlet?channel=party:service:channel
is the right URL for XI 3.0 not the XI 2.0 one.
I guess you provides a valid user id and password to XMLSPY
when it asked for it and that user has enough rights to do XI work.
Did you try to enter the URL into a web browser? It should ask you for you user and password too and brings up a response of Message Servlet ok. If that does not show up then do you have a proxy on your network which might prevent you from hitting the XI server?
Cheers
Stefan

Similar Messages

Enabling HTTPS with Client Authentication for Sender SOAP Adapter on PI7.1

Hello All,
We are currently building up a HTTPS message exchange with an external client.
Our PI 7.1 recieved over HTTPS messages on an already configured Sender SOAP Adapter.
The HTTPS (SSL) connectivity works fine and was completely configured on the ABAP Stack at Trust Manager (TC=STRUSTSSO2)
Login to Message Servlet "com.sap.aii.adapter.soap.web.MessageServlet is required and works fine with user ID and password.
Now we have to configure the addtional Client Authentication.
At SOAP Adapter (Sender Communication Channel) under "HTTP Security Level"you are able to configure "HTTPS with Client Authentication".
But what are the next steps to get this scenario successfully in place?
Many thanks in advance!
Jochen

Hi Colleagues,
following Steps still have to be done:
- Mapping public key to technical user at Java Stack
As preparation you have to activate value "ume.logon.allow.cert" with true under "com.sap.security.core.ume.service" under Config Tool. At NWA under Identity Management at for repecively technical user the public key certificate
- Be sure CA root certivicate at Database under STRUSTSSO2
- Import intermediate Certificate under Certificate List at Trast Manager for the Respecive Server Note
- use Login Module "client_cert" which you have to configure under NWA\Configuration Management\Authentication for Components "sap.com/com.sap.aii.adapter.soap.app*XISOAPAdapter".
Many thanks to all for support!
Regards,
Jochen

Queue name in QOS EOIO -Sender SOAP Adapter

hi,
While configuring sender soap adapter , if we specify EOIO as QOS , then there is a mandatory parameter Queue name to be specified.
What is this Queue name ?
and where is it created
kindly reply
Regards,
loveena

Hi D' souza
Goto tcode -> SXMB_ADM -> register queues
for specifying QOS EOIO you need to assign a queue
from there you can specify the queue for Outbound side EOIO queue
Various queue name and there meaning is as follows
XBT*-Queues for Exactly Once.and time dependent
XBQ*-Queues Exactly Once In Order.
XBTI* are inbound queues for EO with time constarint
XBTO* are outbound queues for EO with time constarint
XBQI* are inbound queues for EOIO
XBQO* are outbound queues for EOIO
for beter understanding of how to configure sender soap channel you may folow this link
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
thanks
sandeep
if helpful reward points
Thanks
sandeep
if helpful rewrad points

SMIME in sender soap adapter

Hi,
I'd like to know the proper format of the POST request to a sender soap adapter with SMIME activated. I've found almost no documentation about it.
I'm trying to send a document ciphered to PI via soap adapter (HTTP POST). I've done the following steps
1. I activate SMIME in the sender soap adapter, and I specify "Decrypt" as the security procedure in the sender agreement. I also incorporate the private key in the keystore DEFAULT and reference to it in the sender agreement.
2. I use OpenSSL to cipher an xml document like this (I use the public certificate associated to the previous private key) :
--> openssl smime -encrypt -in fich.txt -out fich_encrypted.txt certTesting.pem
What I get is:
MIME-Version: 1.0
Content-Disposition: attachment; filename="smime.p7m"
Content-Type: application/x-pkcs7-mime; smime-type=enveloped-data; name="smime.p7m"
Content-Transfer-Encoding: base64
MIIC....[base64 content of the file encrypted]
3. I use CURL to send the HTTP POST request to PI. Previously I get the binary file from the base64 content.
> POST /XISOAPAdapter/MessageServlet?senderParty=&senderService=BC_1[...]
> Authorization: Basic c2U[...]
> Host: pi.[...].com:50000
> Accept: /
> Content-Type: application/pkcs7-mime; smime-type=enveloped-data; name=fich_encrypted.der
> User-Agent: Jakarta Commons-HttpClient/3.1
> Accept-Encoding: text/xml
> Content-Disposition: attachment; filename=fich_encrypted.der
> Content-Length: 620
> Expect: 100-continue
but I get this error from the SOAP Adapter:
--> java.io.IOException: invalid content type for SOAP: APPLICATION/PKCS7-MIME.
I also get the same error if I remove the header Content-Disposition.
4. If I send the xml file without ciphering (header Content-Type: text/xml;charset=UTF-8) I get the error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: call failed: java.lang.SecurityException: Exception in Method: VerifySMIME.run(). LocalizedMessage: SecurityException in method: verifySMIME( MessageContext, CPALookupObject ). Message: IllegalArgumentException in method: verifyEnvelopedData( ISsfProfile ). Wrong Content-Type: text/xml;charset=UTF-8. *Expected Content-Type: application/pkcs7-mime or application/x-pkcs7-mime*. Please verify your configuration and partner agreement
PROBLEM --> I really don't know what the SOAP sender channel is expecting when SMIME is activated. I've tried to send the binary file encripted as an attachment and also directly, but the soap adapter complains.
Thanks

HI,
for XI EP
Please see the below links so that you can have clear Idea..
/people/saravanakumar.kuppusamy2/blog/2005/02/07/interfacing-to-xi-from-webdynpro
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/integrating%20web%20dynpro%20and%20sap%20xi%20using%20jaxb%20part%20ii.article
Consuming XI Web Services using Web Dynpro Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Consuming XI Web Services using Web Dynpro Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
/people/sap.user72/blog/2005/09/15/creating-a-web-service-and-consuming-it-in-web-dynpro
/people/sap.user72/blog/2005/09/15/connecting-to-xi-server-from-web-dynpro
Regards
Chilla..

Reading parameters from Query string : Sender SOAP adapter.

Hello Experts,
I have a SOAP to SOAP scenario. Here we will have multiple receivers and dynamic receiver determination is needed.
The sender will send a Value in Query string of URL to sender SOAP adapter. This value in Query string parameter will decide the receiver at runtime.
I need to know, how can we read values from Query string of incoming call? I did tried to search blogs & forum threads but unfortunately not able to hit the right links.
Any inputs will be of great help.
Should i use "Use Query String" on sender soap channel? I tried it, but i was not able to find any query string parameters in SOAP header or payload.
Please guide me, its bit urgent.
Regards,
Abhi.

> But the argument provided from their side is: They are using standard XSD and this service is provided out of box with sender application.
If they can add a URL parameter, they can also add a field to the structure.
> They cant control the value mapping of parameters in payload to the extent required to implement this change.
Adding a new field to the structure would not affect any existing mapping.
> Since they have this custom requirement of multiple receivers & receiver to be determined at runtime, they need to go for Query string.
This can be done based on any field of the payload.
> I need to find a way to read the query string in any case.
This is not supported by SOAP adapter.
> Can I use one of the header parameters to be mapped to this value (By selecting "Use Query string" & "Keep Headers" flag in sender CC) & then extract this value from header using Dynamic configuration ?
This feature works only for XI header fields, like message ID or QoS.
Not for individual parameters.

SOAP message size limitation for sender soap adapter

Hi All,
We are facing critical production issue in case of sender SOAP Adapter,
If the sender soap message is having 114359 Bytes than the Third party is getting exception and SOAP request is not reaching XI.
If the message size is less then 100kbytes then no exception will come.
Is this a limitation that SOAP message size should not exceed 100kbyte?
Thnaks in advance
Best Regards,
Harleen Kaur Chadha

Hi ,
Thanks for your inputs,Could you please tell me which hardware configurations are you talking about?
Are you people talking about harware configurations for XI?
Best Regards,
Harleen Kaur Chadha

Sender SOAP Adapter with Https

Hi,
can any one give me information on how my Sender SOAP adapter to be configured with HTTPS port.
please give me the what are all different ways to make my Sender SOAP Adapter secure and give me the steps to achieve the functionality.
Thank You,
Madhav

check this section:
http://help.sap.com/saphelp_nw70/helpdata/EN/14/ef2940cbf2195de10000000a1550b0/frameset.htm
Also some help from SAP note:
https://service.sap.com/sap/support/notes/891877
Regards,
Abhishek.
Edited by: abhishek salvi on May 29, 2009 1:59 PM

Sender SOAP Adapter parameter problem

Hi,
My scenario is Web service to RFC. I configured XI (7.0) and tested the scenario with Altova Xml Spy, it works. However the ones that are going to call the service say that they need a sevice with a XmlNode parameter.
They are going to use VB.NET to call the service. What should I do?
Please tell me how to
1. Reconfigure XI to accept XmlNode parameter in sender SOAP adapter(I think this is not possible since XmlNode is a language specific element which should not be used for the sake of compatibility in Web Services)
or
2. How to explain this to them ?
Regards,
-Tarik

Please refer to this blog http://blogs.msdn.com/kaevans/archive/2006/04/06/570223.aspx
Cheers
Fernand

Duplicate check not working in sender soap adapter

Hi guys,
I have an urgent problem. I am using a Sender Soap Adapter (quality of service Best Effort) to receive certain web services requests and send back synchronous responses.
I have ticked the parameters "Use Encoded Headers" and "Use Query String" to implement duplicate check.
For this reason I am expecting XI to return errors of the following type when the sender systems posts duplicates:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MSGGUID_EXISTING</SAP:Code>
<SAP:P1>D00B71AC7AEBDEB3E011E5E43C49D97B</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID D00B71AC7AEBDEB3E011E5E43C49D97B for pipeline CENTRAL, version already exists in system</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
However, although the duplicates go into an error status, the system is responding with the following message:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can anybody tell me how to force XI to return a message type "MSGGUID_EXISTING" when it catches duplicates? Or if there is any configuration I can change?
Many thanks,
Aldo

OK, this problem is resolved.
XI seams to send the error SYSTEM_FAILURE_INTERNAL the first time it receives a duplicate message and sends the MSGGUID_EXISTING error on the following attempt to post the same message.
Cheers.
Aldo
Edited by: Aldo Lazzarini on Sep 23, 2011 6:50 AM
Edited by: Aldo Lazzarini on Sep 23, 2011 6:53 AM

SEcurity settings for sender SOAP adapter

Hey guys
i m implemeting some security features in sender SOAP adapter by taking help frm www.help.sap.com,i have checked the message security box in sender Communication channel but in sender agreement i dont see any options for Decryt or Validate,i only see Keystore,Issuer and subject.
i m on SP9 and XI 3.0
where can i find these options of Decrypt etc?
thanx
ahmad

Hi,
Please see below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0650f56-7587-2910-7c99-e1b6ffbe4d50
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/BTS06CoreDocs/html/a3229d73-170d-42b7-bab9-12ae5f2d0fa7.asp
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/BTS06CoreDocs/html/f869bd82-df93-45e1-b747-b538820253fb.asp
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/121b053d-0401-0010-539f-f9295efb7bad
Document security option in webservices
And also check,
Launch Visual administrator and navigate to Server->Services->Security Provider. In 'Policy Configurations' tab page, select the component 'sap.com/com.sap.aii.af.soapadapter*XISOAPAdapter'. Then click on the tab page 'Security Roles' and select 'xi_adapter_soap_message'. You will find the groups (equivalent to roles in PFCG) to which this security role (xi_adapter_soap_message) is assigned to. Make sure you assign the PFCG role listed here to the user.
regards
Chilla..

HTTPS sender soap adapter

Hi,
I want to use HTTPS port for one of our SOAP -->RFC sync interface .
currently we are using http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel this url and its working fine,
Here we want to use HTTPS ( HTTPS with client authentication as security level) ,but in our current PI system ( 7.31) is not enabled https/ports.
Please let me know how we can enable HTTPS port ,let me know the process.
once HTTPS port is enabled please let me know the process to use HTTPS with client authentication as security level)
Thanks
Surya

Hi Surya,
Base on your requirement ports like 433, 4022 etc as per availability to Trading partners.
Port mapping should be done in the firewall configuration as your web dispatcher port(This information can be obtained from your basis team / will be managed at the installation time / netweaver administration.)
80* series is for ABAP ports and 50* series i sfor JAVA port.
Also check the below link for more information.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/09/20/sender-soap-adapter-https-with-client-authentication
Thanks and Regards,
Naveen

IOException: invalid content type for SOAP: TEXT/ using Sender SOAP adapter

Hi all,
When I am using Sender SOAP adapter, i am getting (MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System) exception.
From my RWB I can see:
2009-05-25 16:18:39 Information The message was successfully retrieved from the call queue.
2009-05-25 16:18:39 Information The message status was set to DLNG.
2009-05-25 16:18:39 Error Failed to parse the XI system response.
2009-05-25 16:18:39 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System.
2009-05-25 16:18:39 Error The message status was set to FAIL.
2009-05-25 16:18:39 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML
Please help if possible! Thanks!
Mayank

Hi,
Check in SLD your integration engine business system have the following
pipeline url : http://server:httpport/sap/xi/engine?type=entry
check Http port also
After that go to TCODE - SXMB_ADM - integrationn engine configuration and check if your server is configured as HUB with the same url or not.
Thanks
Kasturika Phukan

Can we enhance the Sender SOAP Adapter with our own modules?

Hi All,
Can we enhance the Sender SOAP Adapter with our own modules on the Module Tab Page in the Module Processor?
I believe the answer is no. However, whatever may be the answer, I would like to know that is there any specific reason for that.
Please help me in this regard.
Thanks,
Yogi.

Hi,
I think, we are mentioning the URL of the adapter channel directly in the configuration. SO there is no place we can customize this flow..just a thought
Because in the file adapter etc, After Adapter Engine picks up the data and before it goes into integration engine module is processed..
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
Rgds,
Moorthy

Remove authentication in sender soap adapter pi 7.1

Hello
Did anyone manged to remove authentication in PI 7.1 sender soap adapter?
I have updated file web.xml in the file com.sap.aii.adapter.soap.war
and now I want to deploy it,but I dont have any sda in the folder
thx
Shai

hi Shai,
just something to try in case:
you don't need any java parameters of SOAP sender
you can try approach from Stefan:
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
and then:
1. in SICF copy the engine service to a new one
2. put the credentials for this new service inside SICF
then you will have sender SOAP adapter without a password right?
I didn't try it but I guess it would work without
crashing the whole original SOAP sender adapter by
making changes into web.xml
Regards,
Michal Krawczyk

Change Queue Name in Sender Soap Adapter (or make it dynamic)

Hello SDN!!!!
We have a scenario where we want to make a message EOIO and I have set the Queue Name in the Sender Soap Adapter and this works great. BUT it is needed to have a more specific queue name (based on order numbers not interface name) So with this being said, Is there any way to change the queue name or append to it from the Soap Sender Adapter. I see it is possible to write a Module Bean, but the Message object returned from the ModuleContext is a scaled down version of the normal message object. Any help would be greatly appreciated
Cheers
Devlin

Is this the only way to change the queue name for Soap Sender? I don't think it is possible for them to do this, as their urls are static when calling us

Configuring Sender SOAP Adapter

Similar Messages

Maybe you are looking for