Configuring Separate Wikis for Different Domains

Hello:
I've been trying to configure Lion Server to host several different domains on the same IP. Configuring the virtual hosts settings using the Server App seem to handle this just fine. What I'm confounded by, however, is how to have each site/domain have its own separate Wiki content. No matter which domain I browse to, I can still see all of the wiki content on the server. For my purposes, it's imperative that the Wikis from each of my sites not be visible to the others. Has anyone figured out how to do this? Perhaps there's an easy way to get this done, but it's anything but obvious to me.
Insights are most appreciated. Thanks.

kigrant:
To be able to publish each site to its own folder you'll have to split your current domain file into 3 files. I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
OT

Similar Messages

Configure TLS inbound for specific domain

Hi All,
would like to configure TLS inbound for specific domain . am using exchange 2010 and instead of edge we are using Trend Micro IMSS Gateway. now please explain me how to configure TLS for inbound but for specific domain
have gone through their documents but when i checked there is a tab for Trusted CA certificated. i have imported out ORG publicly trusted certificate and have selected mutual TLS. but no luck it now allowing the TLS inbound.
Please help me on this
Thanks, Venkatesh. "Hardwork Never Fails"

Hi imvenkat,
I recommend you ask this in
Trend Micro forum also, since you are using Trend Micro gateway instead of exchange edge server.
Best Regards,
Niko Cheng
TechNet Community Support

Weblogic Sessions for different domains

Hi
I am developing a website that will be will be used in different countries. The code is going to be the same and this code will be deployed on one cluster of weblogic servers.
For Eg. there will be a site abc.com.br and abc.com.mx. Both these are websites for different countries but will be served by the same application server.
So, the same application server will service the request coming from both the websites. So the question that I have is whether Weblogic will treat these requests as seperate sessions or the same session.
ie, will the weblogic server issue two JSESSIONID cookies for both these domains or will this be treated as a single session?
Thanks in advance
Tejas

Hi,
You can use "Cookie-Path" tag inside your "weblogic.xml" file to prevent any such thing: http://download.oracle.com/docs/cd/E15051_01/wls/docs103/webapp/weblogic_xml.html
cookie-path
Default Value: null
Defines the session tracking cookie path.
If not set, this attribute defaults to / (slash), where the browser sends cookies to all URLs served by WebLogic Server. You may set the path to a narrower mapping, to limit the request URLs to which the browser sends cookies.
Still if you want to make sure that the Session Cookie Name should be different for Both the Applications (means other Than JSESSIONID) then you can use <cookie-name> tag inside the "weblogic.xml" file..... One best way of changing the cookiename is using "plan.xml" without changing anything physically in the application.
Example: http://weblogic-wonders.com/weblogic/2009/12/16/updating-cookiename-using-plan-xml/

Configuring IDM menus for different roles for same user?

Looking forward to Sun IDM 8.x and Sun Role Manager 4.1 installation. Couple of points before the decision are -
1. If a user A has two roles R1 and R2 (for Sun IDM) then how does Sun IDM decide how the IDM console should appear (menus etc.) to the user based on whether he's logging in with Role R1 or R2? The login screen doesn't contain any input entry for choosing the role with which to log-in. With that in mind, is it even possible to have multiple roles for same login id? Or does the user have to maintain two seperate login identities?
2. Same question for Role Manager
3. Does Sun Role Manager 4.1 provide Roles merging feature?
Thanks,
AG

IDM combines the two roles. So if a user has the two roles and role R1 grants access to menu items 1,2,3 and role R2 grants access to menu items 3,4,5, the user will have access to menu items 1,2,3,4,5. If you want to separate these two roles, you will need two different login users - but what exactly are you trying to achieve there?
Can't help you with Role Manager, sorry.

Seeting cookies for different domain with port number

Hi,
I've been desperately trying to solve this for a few days now so thought i'd give up and ask.
Basically, when a user logs into the website, the idea is for them to be automatically logged into the bulleting board. This is being done by setting a cookie(I won't go into detail as it's not relevent).
The cookie is being created in one domain (.stage.csu.ac.uk) and needs to be used by another, .prospects.ac.uk. However, the board is on servername.prospects.ac.uk:81, which means that the cookie isn't being picked up.
I've been tearing my hair out for days about this. I can't change the fact it's using port 81, and there's no other way of doing this log in.
If ANYONE can help, I would not be able to say thanks enough.
Sam.

Perhaps you can call a jsp on the other server to set the cookie for you, for example by loading it in a hidden iframe?
This has some maintainance issues because you need to provide a full url to the jsp on the other server, so if anything changes (port number for example) then this solution will break.

Setting up separate backgrounds for different Spaces

Hello,
I am photography student and thus do a lot of picture editing, in which the color management is really important.
One of the things that can really help me is to make sure I'm working with only a color neutral background (i.e. 18% grey).
Is there any way where I can set the spaces I have set up specifically for the use of Photoshop/Adobe bridge to have their own special background of 18% grey, while the rest of my Spaces can remain pretty and colorful?
Thanks!

A possibility is HyperSpaces - CNet Downloads or MacUpdate.

Transactional Replication configure into different domains

Hi team,
We have two domain, we need actual data immediate from domain one to domain two.
In this scenario we are paling to configure the transactional replication from domain one to domain two.
How to configure the transactional replication for different domains.

Replication across non-trusted domains or workgroups can be done using SQL Authentication end to end or you can use Windows Authentication by configuring
pass-through authentication.
Pass-through authentication can be configured by creating a local Windows account on both the Publisher and Subscriber that has
the same username and password. Use this account for the replication agent process account and have the connections to the publisher, distributor, and/or subscriber impersonate this account. Ensure the account
has the permissions required in
Replication Agent Security Model.
This approach is covered in the section Use Windows Authentication to Set Up Replication Between Two Computers Running SQL Server in Non-Trusted Domains in
HOW TO: Replicate Between Computers Running SQL Server in Non-Trusted Domains or Across the Internet.
Brandon Williams (blog |
linkedin)

Create separate NDR for each exchange domains hosted in one exchange server single forest

Hi techies,
Our environment is windows 2012 domain with exchange 2013.
Configured with multiple domains like xyz.com, abc.com etc.,
Problem description:
When a user mailbox [email protected] is full, the exchange server delivers the NDR from [email protected]
Requirement:
Is it possible to create separate NDR for each domain?
Management do not want to show the domin name xyz.com for the users belong to abc.com when delivers an NDR messages.
Appreciate your earliest response.
Thanks
Alagar

Hi Alagar,
Please check what is your -ExternalPostmasterAddress says:
Get-TransportConfig | fl *Post*
You can set it to blank if required.
Set-TransportConfig -ExternalPostmasterAddress $null
And if senders are still receiving NDR's after you set *Prohibit send and receive at (GB): unlimited , please give it some time, it might be due to AD replication is yet to complete.
Regards,
Satyajit
Please“Vote As Helpful”
if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

How to setup separate WIKIs in Portal 7.1 (u1+)

This is moved over from a previous thread as it is a rather important question.
What I'm asking specifically about is when setting up more than one wiki (through psconsole, admin tools) how are those wikis configured to have same/different content?
For example: when creating two containers with a wiki channel for each I have two wiki tabs but the content is the same for both. How would I go about setting them to each have their individual content?
I'm fine with having to use manual tools to configure each separate wiki. We don't want user communities but just different wikis for different roles that are setup by an admin to be in a tab somewhere for these roles.

Ok, regarding your question on
+how do I create a new community, put a wiki in there and have the wiki show up in a tab somewhere just as it happens know when I just put the wiki in a container?*
If you are using 7.1u1 then communities tab should be available on your desktop along with other tabs?
To create a new community
1. Click on the Communities Tab >> Create a new community link
2. Create a new community of type "wiki" by specifying a community name and corresponding permissions
[Note: A public community contents can be accessed by anyone by searching it using communities search portlet . To restrict access of the contents of your community, you should create a private community or custom community)
3. Now the first page which you seen on accessing a wiki community is Main wiki page of that community . Any page that you create within this community will be unique to that community. For example you can create a community called "MyWikiPublicComm" and within that community you can create some wiki pages named "Test", "Blah" etc
|-MyWikiPublicComm
|----Main             /* (identified as "MyWikiPublic:Main") */
|----Blah             /* (identified as "MyWikiPublic:Blah") */
|----Test             /* (identified as "MyWikiPublic:Test") */
To make the wiki community accessible by desktop wiki portlet
As i earlier mentioned, set the wikiPage portlet preference to your communities particular wiki page . Assume i want to set the "Test" page of "MyWikiPublicComm" community, then
you can go to psconsole >> Manage channels & containers >> Navigate to the tab where wiki portlet channel is added >> Click on the wiki portlet channel (DefaultWikiContainer channel) >> set the "wikiPage" portlet preferance to "MyWikiPublic:Test" .
Now clicking on the wiki tab on desktop should bring in the contents of the "Test" wiki page available inside "MyWikiPublicComm" community.

Multiple hostnames for multiple domains

I am currently running 3.0SP4 in Open mode without a gateway. I have one server instance with two domains (call them domain1 and domain2). Instead of having users have to go to append the domain name to the server URL, I would like to create two separate hostnames for each domain (call them domain1.test.com and domain2.test.com, both are in the same subdomain). I added both hostnames to the system and to the DNS and can reach the server fine. I followed the procedures in the iPS Admin Guide (Chapter 8 Configuring the Gateway, Using Virtual IP and DNS Names), adding the following:
domain1->Authentication->Domain URLs
/domain1
domain1.test.com
domain1.test.com/domain1
domain2->Authentication->Domain URLs
/domain2
domain2.test.com
domain2.test.com/domain2
I also editted the platform.conf file to include:
ips.virtualhost=domain1.test.com domain2.test.com 111.111.111.111
Domain1 is set to be the default domain.
I don't want to permit access to domain1 from domain2.test.com, or vice-versa.
When I go to domain1.test.com, it brings up the login screen fine and I can log in. When I try to go to domain2.test.com, I get a No Such Domain error.
I think this might be because it might be trying to redirect domain2.test.com to the default domain (domain2.test.com/domain1) and so I get this error, since it is not in the Domain URLs for domain2.
Or is it a separate problem? How can I fix this?

I found my problem... had to do with the default domain Domain URLs.

Access control for different user groups in APEX 4.0

Hi guys,
in Apex 4.0, is there any way to use the access control page to configure access control for different user groups?
The access control page currently only has an access control list by users with 3 privileges namely, Administrator, Edit & View where Administrator has the highest access level & View the lowest. Therefore 1 user cannot have more than 1 different privilege, however if the user belongs to 2 or more different groups then we can control what access he can have in a more fine grained manner. We also want to have more than the 3 privileges given.
Can we assign different groups to different users and let them have different privileges to be configured by page, region, process or item level?
Now Apex will create 2 tables, Apex_Access_Control & Apex_Access_Setup to store the application access control mode & access control list. It will also create 3 authorization schemes "access control - administrator", "access control - edit" & "access control - view" based on the 2 tables.
Does this mean we have to change the table structures & edit the authorization schemes to suit our usage? We are reluctant to do this because if we upgrade to a newer version of Apex then we would have to merge our pl/sql coding with Apex's updated code.
How can we auto-configure more than the 3 authorization schemes in the access control page? Is there any way to achieve a finer grain of access control based on the current access control administration page given by Apex without writing it ourselves?
We are afraid that we may have missed something on Apex access control & do not want to reinvent the wheel.

Hi Errol,
to build your own application authorization scheme around the security model supplied by Apex for administration of the Apex environment would be a bad idea.
This was never intended for authorization scheme management in custom built Apex applications, it was solely intended to control access in the Apex environment overall. The API for it is not published, and making changes to it, such as adding more roles, would run the risk of breaking the overall Apex security model. It would not be supported by Oracle and Oracle would not guarantee the upwards compatibility of any changes you make in future versions of Apex.
In short, you should follow Tyson's advice and build your own structure. As he indicated, there are plenty of examples around and provided your requirements are not too complicated, it will be relatively simple.
Regards
Andre

HT201250 Separate Backups for Multiple Drives?

I have 4 drives in my MacPro’s 4 HD bays: A, B, C & D.
A & B are 2TB drives, and C & D are 750GB drives.
I want B to backup A, and D to backup C.
Can I set this up, and if so how?
Right now it seems I can only set up multiple redundancies, rather than setting up separate backups for different drives.
Any help is appreciated!

You can set it up, but not with Time Machine if that's what you had in mind. You would either have to write a script of some kind, or (more easily) use a third-party application such as "Carbon Copy Cloner."

How to configure PerformancePoint to access SSAS hosted in different domain.

I have Sharepoint 2013 installed in a demo environment with a domain say ABC. I have username and password of an account say DEC\sqlread, having only read permission in SSAS (2008 R2) production environment, which is hosted on different domain. How do I
configure Performance point to use that read account (DEC\sqlread) of SSAS whenever any user of ABC domain uses performance point reports.
I don't have much permission in SSAS production environment to configure things, but I have admin access to demo environment.

Hi Dev,
According to your description, you want to configure PerformancePoint to connect SSAS using a read account.
You can configure the Unattended Service Account for the PerformancePoint Services:
Here is a good blog you can refer to:
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
Reference:
http://technet.microsoft.com/en-us/library/jj819321(v=office.15).aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Need to collect the Windows logon and logoff events across the Domain in a DC eviornment, for different machines and user accounts.

Hello All,
I am trying to build a Tool to collect the info about all the user's who login and logoff on daily basis in a domain network. I am using a windows 2008 server as a DC and have xp, win 7, win 8 , win 12 server as clients in the network.
There are few questions in my mind which I am not able to answer.
1> When a user tries to login to the DC network, he/ she gets authenticated using the kerberos protocol. does these authentication gets logged on the AD server by default? I have see a way to enable it from registry but even that's not giving me the expected
output in the eventvwr.
2> Do I have to use Audit policies to monitor all the user's log off and log on activities?
3> Is there a way to collect these information from any place on the AD server other than the Eventvwr?
Please help me in finding the solutions to these query's of mine.
Thanks.

1. Open the Group Policy Management console on any domain controller in the target domain: navigate to Start → Administrative Tools → Group Policy Management.
2. In the left pane, navigate to Forest: <domain_name>→ Domains → <domain_name>→ Domain Controllers. Right-click the effective domain controllers policy (by default, it is the Default Domain Controllers Policy), and select Edit from the pop-up
menu. </domain_name></domain_name>
<domain_name><domain_name>3. In the Group Policy Management Editor dialog, expand the Computer Configuration node on the left and navigate to Policies → Windows Settings → Security Settings → Local Policies → Audit Policy. </domain_name></domain_name>
<domain_name><domain_name>4. Set the Audit account management and the Audit directory service access policy to "Success". Set the Audit logon events policy to "Success" and "Failure". </domain_name></domain_name>
5. Navigate to Start → Run and type '"cmd". Input the gpupdate /force command and press Enter. The group policy will be updated.
Number of events could be excessive so you need to adjust size of Security log ( 1gb for example )
Usage of EventCombMT Tool (part of
MS ALtools )
 This tool gathers specific events from several different servers to one central location.
 Run the EventCombMT.exe > Right Click on Select to search field > Choose Get DCs in Domain > Mark your Domain Controllers for search
 Click the Searches menu > replace Event ID field values with
4624 LOGON / 4634 LOGOFF
 Click Search and wait for the process to complete the operation.
 After the search is done the output directory contains the log files for the domain controllers where events with the specified Event ID’s were found.
Alternatively you can try Netwrix Auditor for Active Directory solution with 20 days of free trial to generate such reports.
--- Jeff (Netwrix)

How to configure Portal (3.0.9) with different hostnames or different domains ?

I have to configure an application based on Oracle Portal 3.0.9 with different domain names, for example: myappl.domain.com for certain internet users and myappl.domain.br for Brasilian internet users.
Can I configure the Portal in the right way ? It should reply to http://myappl.domain.com requests by generating all its url with this first part of name and it should reply to http://myappl.domain.br requests for other users, keeping all its generated urls with the correct first part of name.

The easiest way to provide search on just pages (not content areas) would be to crawl portal pages just like static pages. We have search partners on http://portalcatalog.oracle.com/ that can help you w/ this.

Configuring Separate Wikis for Different Domains

Similar Messages

Maybe you are looking for