Configuring SLD in Portal
Hi ,
Can anyone help me on Configuring SLD in Enterprise Portal ?
Other than in Visual Administrator configuration we have to do anythinig in Portal side ?
Thanks
Venkat
Hi Venkat,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b2b146-5776-2910-4a8f-9b3190eab060
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/628a9f93-0701-0010-48bb-b0d872345c15
Cheers
Ajay
Assign points if useful.
Similar Messages
-
No technical system in sld configuration in Enterprise portals
Dear All,
while configuring sld in Enterprise portal , iam getting web as java and and iam not getting web as Abap technical system, where im doing wrong, i have passed parameters in Data Supplier Bridge, but not getting Abap technical system in sld, please help in this regard,
thanks & Regards,
Balakrishna.i am trying to setup sld for newly installed sap system in my lab
http://help.sap.com/saphelp_nw04/helpdata/en/23/b557422d095542e10000000a1550b0/content.htm
i think my system is scenario-2 .
as i have ep sneak preview system installed on my single stem with good configuration .
it was running good for enterprise portal.
and i have r/3 system in the network .
i like to setup sld. so as to make connection between ep and r/3
in the above link it says.
first step go and run where sap netweaver administration system
1. i did that on the ep system
2. choose service ->sld services->http service (i did that)
3.but when ??? it comes to host and port of the ( Enter the Host and the HTTP port of the system to which your system will report the data..)
i am not sure about the host and port where do i need to look for that
and even what host name and port number i am supposed to get at the R/3 system end .
it would of great help if some one can throw some light r help me to walk through that
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2167- [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
i hope even this link helps as i followed all these steps
but in that i am unable to see the R/3 system in web as abap( R/3 system is up and running good
thanking you prattipati -
How to Configure SLD for Backend Connecting to SAP R/3
Hi All,
I installed SAP Netweaver04's sp7 sneak preview, now i need to connect to the backend Syatem SAP R/3, for this can you provide the info--How ro configure the SLD.
ADV Thanks
PhanikumarHi,
There are lot of info available with this URL
https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio
http://help.sap.com/saphelp_erp2005/helpdata/en/11/0dfe55e0c8fc4e910706a47ca6859b/frameset.htm
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fd876513-0a01-0010-65ad-a63701bedd8d
http://help.sap.com/saphelp_nw04/helpdata/en/3b/3e1b40fcdd8f5ce10000000a155106/frameset.htm
Thanks
Gopal
Message was edited by:
Gopal krishnan -
Error while configuring SLD.
Hi All,
I have SAP Netweaver 7.0 installed in my system. I want to configure SLD in my system. I have followed the steps mentioned in the following link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
I could successfully execute all the steps till Step 8
Step 8 - "Click on the icon to test the Data Transfer from J2EE to SLD Server."
This is the error I get in this step:
"Operation Failed! Failed to collect SLD Data.
Failed to send HTTP Data:503:Service Unavailable. Please check if the target SLD System is available and the SLD Bridge is started there."
What does the error mean?
Please suggest me how to resolve this error.
Regards,
Padmalatha.Kcheck out
[http://help.sap.com/saphelp_nw70/helpdata/en/43/ce62c162cd0cd4e10000000a1553f7/content.htm]
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414] -
Error at phase "Configure SLD" NW 7.0 Central instance step
Hi All
I am installing NW 7.0 EHP1, on clustered Oracle10g, win2003. I have an error on AMSC step, configure SLD.
here some logs
java.exe.log
ConfigMainExt state401
TYPE=A<BR>STATE=401<BR>INFO_SHORT=Error connecting to http://AAAPRD:50200/ctc/ConfigServlet?param=com.sap.ctc.util.
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,
HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|).
The provided user data might be incorrect or user might be locked.<BR>CONFIGURATION=
ALL USERS ARE NOT LOCKED, only JAVA_GUEST is locked
sapinst.log
INFO 2009-06-13 16:13:15.983
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:13:16.014
Removing file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:14:02.843
Creating file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\x.
INFO 2009-06-13 16:14:02.843
Removing file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\x.
INFO 2009-06-13 16:14:05.718
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:14:05.718
Removing file C:\Program Files\sapinst_instdir\x.
INFO 2009-06-13 16:14:07.374
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.xml' to '
C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.12.xml'.
INFO 2009-06-13 16:14:08.906
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.xml' to '
C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.13.xml'.
WARNING 2009-06-13 16:14:20.218
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation.
Operating system error message: The filename, directory name, or volume label syntax is incorrect.
INFO 2009-06-13 16:14:22.984
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/inifile.xml' to
'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/inifile.5.xml'.
INFO 2009-06-13 16:14:23.249
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_Doublestack_CI|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|2|0
W2K_ServicePack_Check
ind
ind
ind
ind
2
0
INFO 2009-06-13 16:14:38.781
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/keydb.xml' to
'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/keydb.5.xml'.
INFO 2009-06-13 16:14:38.937
Copied file 'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.xml' to
'C:/Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI/statistic.14.xml'.
INFO 2009-06-13 16:14:39.78
Execute step configSLDMainLocalMapSecRolesToUsers of component
NW_Doublestack_CI
ind
ind
ind
ind
0
0
SAP_Software_Features_Configuration
ind
ind
ind
ind
17
0
NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0
INFO 2009-06-13 16:14:39.859
Creating file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\java.exe.log.
INFO 2009-06-13 16:14:39.890
Output of C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/
tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX
AAAPRD:50200 J2EE_ADMIN XXXXXX is written to the logfile java.exe.log.
INFO 2009-06-13 16:14:40.000
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster/server0/
apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX
AAAPRD:50200 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
ConfigMainExt state401
TYPE=A<BR>STATE=401<BR>INFO_SHORT=Error connecting to http://AAAPRD:50200/ctc/ConfigServlet?param=com.sap.ctc.util.
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,
HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|).
The provided user data might be incorrect or user might be locked.<BR>CONFIGURATION=
ERROR 2009-06-13 16:14:40.000
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
ERROR 2009-06-13 16:14:40.234
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|
SAP_Software_Features_Configuration|ind|ind|ind|ind|17|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|
NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR
( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.).
sapinst_dev.log
TRACE 2009-06-13 16:14:39.843
NWCallJava: Arguments passed: ROLE=DataSupplierLD,USER=SLDDSUSER,
COMPONENT=sap.com/com.sap.lcr*sld,HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=XXXX
INFO 2009-06-13 16:14:39.859 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW701\PI\ORA\HA\CI\java.exe.log.
INFO 2009-06-13 16:14:39.890
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/
tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX AAAPRD:50200
J2EE_ADMIN XXXXXX is written to the logfile java.exe.log.
INFO 2009-06-13 16:14:40.000
CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath D:/usr/sap/GAC/DVEBMGS02/j2ee/cluster
/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt
XXXXXX AAAPRD:50200 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
ConfigMainExt state401
TYPE=A<BR>STATE=401<BR>INFO_SHORT=Error connecting to http://AAAPRD:50200/ctc/ConfigServlet?param=com.sap.ctc.util.
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,
HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|).
The provided user data might be incorrect or user might be locked.<BR>CONFIGURATION=
TRACE 2009-06-13 16:14:40.000
NWException thrown: nw.configError:
Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
TRACE 2009-06-13 16:14:40.000
Function setMessageIdOfExceptionMessage: nw.configError
ERROR 2009-06-13 16:14:40.000
CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.
TRACE 2009-06-13 16:14:40.172 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2009-06-13 16:14:40.234 [sixxcstepexecute.cpp:950]
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |
NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|17|0|NW_Usage_Types_Configuration_AS
|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status
ERROR ( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile
java.log: 'JSE '.).
TRACE 2009-06-13 16:14:40.265 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP NetWeaver 7.0 including
Enhancement Package 1 > SAP Process Integration > Oracle > High-Availability System > Central Instance
( Last error reported by the step :Java EE Engine configuration error. DIAGNOSIS: See output of logfile java.log: 'JSE '.).
You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i>
to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p>
Log files are written to C:\Program Files/sapinst_instdir/NW701/PI/ORA/HA/CI. </p> </body></html>
TRACE 2009-06-13 16:14:40.265 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUIHi,
SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcrsld, HOST=AAAPRD,P4PORT=50204,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(118|17|152|163|51|195|178|104|235|). The provided user data might be incorrect or user might be locked.*
Above error is mainly coming because of 2 reasons:
1) user is locked SLDDSUSER. Please check this user of locked...if it is global user which is used by other system as well to connect to SLD then might be password in any other system will be worng which is causing this user globally locked...
2) Potential reason might be roles of this user is not properly mapped or this user does not contains appropriate roles..Please check SLDDSUSER profile..it must contains all roles...
Please check above if error still persists the paste log again...
Thanks
sunny -
Want to delete all the mails in the mail box configured for BPM Portal
Hi All,
Do you have idea to perform this activity.
I want to delete all the mails in the Dev mail box configured for BPM Portal.
Server and mailbox details as given below :
Mail a/c = Y00123
Mail server = sap.mail.com
Thanks, Sanjayhttp://java.sun.com/developer/onlineTraining/JavaMail/contents.html
http://www.jguru.com/faq/view.jsp?EID=17035
if you know the password of the account, i think you can also access the mail using mail client, like you use outlook to deal with your company mail daily. -
LDAP user groups not visible for configuring a Group Portal
Hi,
We have created a Custom Security Realm(myRealm) on WebLogic 7.0 SP2 in which
I've added the Novell LDAP Authentication provider as the authentication provider
and then set "myRealm" as the default realm for the domain. I am able to start
the WLS server instance and login to portalAppTools with the "administrator" account.
We would like to configure a Group Portal. In Portal Administration interfaces,
when I click on Group Administartion, I am unable to see any of my external LDAP
groups. I know that we cannot create/delete users or groups in the external LDAP
repository thru the Admin UI but the documentation says that I should be able
to view the users/groups in the Admin UI. Authentication against the external
LDAP repository works fine. Can anybody suggest the reason why we are unable to
view any of the Users or Groups in our external LDAP repository thru the User
Administration interfactes.
Appreciate any feedback.
Thanks
VikramHi Jim,
I've configured a default LDAP V2 Compatibility Realm by modifying the Config.xml
file. I was able to restart Weblogic and see the LDAP Groups and Users thru the
WLS console. In our project we've a unique requirement wherein all Application
Groups and User Accounts would be stored in an LDAP repository and all BEA SERVICE
level accounts and groups are stored in a Database (groups like AdminEligible,
Administrators etc.). We need to be able to look at the groups in both the Database
and LDAP repositories in order to administer and configure a Group Portal. On
the outset it looks like we will not be able to do what we want to with the current
portal framework. Please suggest if there are any alternatives in order to implement
this solution. I am sure there are lot of other Clients who cannot create groups
like Administrators, AdminEligible etc in their LDAP repositories and will be
forced to think of alternatives.
I would appreciate if you can reply back at your earliest convenience.
Thanks
Vikram
Jim Litton <replyto@newsgroup> wrote:
The Weblogic 7.0 Authentication Providers (new JAAS Framework) is not
supported with Portal 7.0. You will need to configure the Compatibility
Security CustomRealm for Novell to try to get Portal working.
see defaultLDAPRealmForNovellDirectoryServices at
http://e-docs.bea.com/wls/docs61/adminguide/cnfgsec.html#1083149
In addition, remember to test functionality through the Weblogic
Console. If you can see groups and users there okay it is very likely
that Portal will operate.
-- Jim
Vikram wrote:
Hi,
We have created a Custom Security Realm(myRealm) on WebLogic 7.0 SP2in which
I've added the Novell LDAP Authentication provider as the authenticationprovider
and then set "myRealm" as the default realm for the domain. I am ableto start
the WLS server instance and login to portalAppTools with the "administrator"account.
We would like to configure a Group Portal. In Portal Administrationinterfaces,
when I click on Group Administartion, I am unable to see any of myexternal LDAP
groups. I know that we cannot create/delete users or groups in theexternal LDAP
repository thru the Admin UI but the documentation says that I shouldbe able
to view the users/groups in the Admin UI. Authentication against theexternal
LDAP repository works fine. Can anybody suggest the reason why we areunable to
view any of the Users or Groups in our external LDAP repository thruthe User
Administration interfactes.
Appreciate any feedback.
Thanks
Vikram -
How to configure mail using portal collaboration
hi Guys..,
pls tel me
how to configure mail using portal collaboration and its uses..
thanks
regards
kamalHi,
Two Configure Email, first
You have to create a System for Groupware through System Administration ->System Configuration -> system LandScape
Then create a Groupwaretransport
implement SSO between your Mail server and your EP...
and finally
Create a Mail service...
More Info is available at below link..
http://help.sap.com/saphelp_nw04/helpdata/en/7c/6a469702474146a8ef2f97fe880b2f/frameset.htm
and have a look at the thread raised by be on Calender Configuration...
Collaboration calendar : No transport has been configured for the calendar
Regards,
Srinivas -
SSO Configuration in the Portal - Configtool screen greyed out
Hi,
I am trying to setup SSO to our AD server in our portal system.
However, when I go into the config tool to change the settings in the UME LDAP Tab - the screen is greyed out and I cannot change anything.
Anyone know how I can modify this screen?
DaveHi ,
You can opt for SAML.
Configuration from BASIS & Portal Side.
[Setup SAML 1.1-based Web SSO from NetWeaver CE to non-SAP systems ]
Configuration from Share Point side.
[http://technet.microsoft.com/en-us/library/ff607753.aspx]
Also you can check out the third party tool u201C btexx MOSS Integratoru201D .
[http://www.btexx.com/products/btexx-collaborationmanager/MOSS-WSS]
[http://www.btexx.com/products/btexx-collaborationmanager/video]
Regards
Sahil Kohli -
Need info to configure SSL for Portal Server in EP6SP2
Hello,
We need to configure SSL for Portal Server. We are using J2EE 6.20 Patch 25 and EP6SP2P4. The ITS is already using https and it creats lots of Session issues since Portal is not in https.
Is there any OSS Note or How to guide to configure Portal to use SSL.
Thanks.
- PKHi Marcel,
Thanx for your Post, I have a Question, we will use CISCO for load balancing and SSL termination but I have a big issue, the URL in the portal applciation is always the same ant the URL in the borwser, I guess al the other URL´s are in the Frames, how will we configure the SSL termination for the login page in example if the URL in the Browser appears always the same?
Thanx in Advanced!!! -
Internal and External Portals be hosted & Configured on Same Portal server?
Hi Experts,
Is it possible to host and configure the Internal portal and External Portal on the same portal server?
If yes, kindly provide the inputs.
We have a scenario wherein we have to use the same portal server for both kinds of users (Internal as well as External).
We want to provide separate URLs for both the portals and the datasource for the users management would be different for both the scenarios.
The user managemnet in case of Internal Portal has to be authenticated to an AD server whereas in case of External Portal the user management would be taken care by UME.
Please suggest and share some docs if possible.
Thanks & Regards,
AnuragHi,
Can we customise the Portal logon page for both the portals differently?
I've already customised the portal logon page by modifying the UME properties in the Config Tool but that was done keeping in mind the External Portal users. Now, we want to customise the page for Intranet users but with different options at the logon page.
How can we achieve this functionality as any property that we modify in either VA or Config Tool will affect both types of portal pages.
For an eg. we have a Self Registration link for the external users which we do not want for the Intranet users. How is this possible?
If we design a webdynpro java application for the logon page and for authentication purpose, can we call a home page iview on successful authentication?
And with this customised webdynpro java application, can we connect to the AD server for the user authentication?
Best Regards,
Anurag -
Configuring SLD for WebDynPro Connection
Hi,
I had SAP 4.7 & E.P 6.0 SP4
i am able to run Welcome WebDynPro Application,
but unable to configure SLD for running Flights WebDynPro Application.
I m not able to find WebAS Abap in Technical System.
Plz let me know about SLD Configaration.
I need ur Help in urgent.
Thanks & Regards.
Have a Lovely Day.Hi Sree,
check following links to configure SLD as well as JCO connections to your SAP R/3 system.
Re: Configuration of SLD
Re: Web Dynpro - Problem with (SLD) JCO Connection
Regards,
Bhavik -
Configuring BI-java portal to BW backend
Hello,
We have an existing application portal which used to display BI reports and related iviews. Now I have installed a new BI-Java portal instance. I want to configure this new portal instance to connect to my BW backend. How do I go about it?
Also, what are the changes I need to make in the existing application portal to make sure that the BI iviews point to the new BI Java instance?
Thanks,
AjayAjay,
This [wiki|http://wiki.sdn.sap.com/wiki/display/EP/HowtoConnecttoBWSystemthroughEnterprisePortal7.0UsinganIView.] should help you in creating a system and you can point your iviews to this system.
Good Luck!
Sandeep Tudumu -
Configuring SLD for ABAP trial version.
Hi,
I have installled ABAP trial version and 2004s Java trial version.I am facing error in configuring SLD for 2004s ABAP trial version . I am getting this below error.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=aarya-3 GROUP=SPACE R3NAME=NSP MSSERV=sapmsNSP PCS=1 ERROR Group SPACE not found TIME Mon Apr 21 15:33:19 2008 RELEASE 700 COMPONENT LG VERSION 5 RC -6 MODULE lgxx.c LINE 4288 DETAIL LgIGroupX COUNTER 4
Has anybody configured the SLD for local ABAP server? please let me know where I am doing the mistake..I have read many threads regarding JCO error but my problem is not resolved yetHello Sam,
Yes it is. Check the documentation at
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/cc/bae93a2876a81ae10000000a11402f/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/cc/bae93a2876a81ae10000000a11402f/frameset.htm</a>
for further details.
Regards,
Klaus -
Error in Configuring SLD.
Hi,
I had EP 6.0 SP4 & R/3 4.7
I want to Deploy SFlight Webdynpro Application,for that i have to configure SLD.
I used this Weblog to configure SLD.
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
While configuring SLD I got an Error in Step 9, I could not Find Update local SLD to true, RFC Gateway server to sape50 and click on button ' Start Bridge'
In Visual Administration when i click Trigger Button in Step 16.
It is displaying Error(Bridge not connected)
Plz Hlp me it's Urgent
Thanks & Regards.
With lot of Hopes.
Sree Ram.<i> I could not Find Update local SLD to true, RFC Gateway server to sape50 and click on button ' Start Bridge'</i>
This stuff is done in the SLD itself. Go to Htt://<localhost>:50000/sld. You will need your user name and password. Click administration. Click Data Supplier Bridge.
Regards,
Rich Heilman
Maybe you are looking for
-
Adobe air with premiere pro cloud
I downloaded premiere pro via cloud. When I click on help it says I need adobe air. I already had it on my machine. But I went to the referred adobe site anyway thinking that it would be a different file, etc. I could not make heads nor tails of
-
HT201303 I forgot answer my security questions plese help me
i forgot answer my security questions plese help me
-
hi, Can any body give some sample code or idea how can display tiff image or tiff file in a web browser. Thanks in advanced.
-
External harddrive with ituneshelp
i have half of my music on an external hard drive. i added the folder to itunes but itunes can only find music on my computer, is there any way it can remember to use the computer and the external hard drive
-
I was stolen an ipad, could I lock it forever via lost mode
My ipad was stollen few days ago, I had put it on lost mode and the ipad was registered with it serial number under my Apple ID. Is it possible to lock the ipad permanently, means the user would not able to reactiviate it or reset with factory reset?