Configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN

Hi guys, really hoping that someone can help me with configuring SMTP Namespace Sharing between two Exchange Forests on the same LAN.
Basically, I have created a new forest and installed a new exchange organisation in this forest.  Both forests are located on the same IP subnet and a two way trust has been created between the forests.  Federated sharing has also been configured. 
I can use ADMT to migrate the user and computer accounts to the new forest and also migrate test mailboxes over.  Ideally, I want to be able to do the mailbox migrations in stages so will need to be able to have mail flowing between the two forests. 
I have read over the following article (http://ibrahimnore.wordpress.com/2012/09/06/configuring-smtp-namespace-sharing-between-two-exchange-forests-part-2/)
which is good but it's demonstrating over the internet, can anybody advise how this can be achieved on the local LAN? 
Any help greatly appreciated :-)

Hi Gilliano,
Thanks for correct link. I must say this is a very good article indeed, I read the entire article and if you go to the 3rd part of this article, please note the text "DOMAINC.COM is configured as Internal Relay Accepted Domain on both the domains"
This is exactly what I asked you to check. Personally, I understand the method described in this article will work but its very complex to manage and administer, while the easiest option is to configure internal relay at the first place and no need to make
so many DNS changes and customizations to your environment.
The solution really depends on what your requirement is - Since you mentioned that you are migrating stuff over from source to destination - I feel this article is too complex for your situation and not really worth (for your requirement). The setup described
in the article is an excellent choice if you are planning to keep both forests alive for longer duration due to several reasons like compliance or company mergers and so on...
please let me know if my explanation is not clear enough.. we can even even have a one-on-one email conversation too!
All the best!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. Regards, Siva

Similar Messages

  • SMTP Namespace Sharing between two mail system

    I have used two mail server (Exchange 2013 and Linux sendmail) for mailing in the same domain like abc.com.
    I have converted authoritative domain in to internal relay for sending mail in Linux mail user, and create a send connector point to Linux mail system as a smart host. in that case my exchange user send mail to Linux user and internet via Linux smart host,
    then I create a receive connector in exchange server for receiving mail from Linux mail system as edge transport custom connector & permission set to anonymous, when Linux user send mail to my exchange user it queued in my exchange message queue and
    the error is:
    Last Error:A local loop was detected.
    What's the problem?

    Hi rana78,
    As Nathan mentioned, please create Contacts.
    Detailed information:
    So to avoid NDRs when using shared SMTP namespace you will need to either disable recipient filtering, configure the product to do LDAP queries against all directories that share the namespace, or create Contacts.
    More details to see:
    How to Share an Email Domain Between Two Mail Systems
    http://exchangeserverpro.com/how-to-share-an-email-domain-between-two-mail-systems/
    Disclaimer:
    Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
    that you completely understand the risk before retrieving any suggestions from the above link.
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Using the same photos and music between two user accounts in the same Mac

    Hi,
    I think this question might have already been asked in the forum.
    1. I have one MacBook Pro and two user accounts (One for me and one for my wife)
    2. We are having two seperate iPhones with seperate AppleIDs
    3. We want to maintain the apps / calendar / mail / reminders / contacts as seperate - Through iCloud (Seperate Apple ID approach) - All this is fine
    4. All we want to have it shared is the Music files and the Photo library without duplicating
    I have tried the shared folder approach for the music and having the iTunes point to that directory for the libary location in the preferences but unfortunately if she adds a folder to the library mine does not get updated unless I do a add folder to library and vice versa.
    Whats the best way to deal with the Photos / Music sharing between two user accounts on the same mac
    Thanks
    Shas

    To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
    To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
    If you want to give full read/write access to more than one user, see the support articles linked below.
    iTunes: How to share music between different accounts on a single computer
    iPhoto: Sharing libraries among multiple users
    There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

  • Communication between Two WebLogic instances on the same machine

    Hi,
    We're having a problem with communication between two copies of Weblogic on
    the same machine. They are configured with seperate ports (regular and SSL).
    Independantly, they run fine. I can access EJBs running on either of them.
    The problem is that a bean in one of them has code which attempts to access
    an EJB on the other one. The procude fails when trying to obtain the initial
    context. This same code works if compilied independantly of WebLogic on the
    same machine.
    Are there any known issues regards communication between two running
    instances of Weblogic on the same machine?
    Thanks in advance,
    Randy Yarger
    marchFIRST
    [email protected]

    Thanks for the prompt reply.
    There is one IP address (internal address 10.227.1.34) one the machine. WLS1
    is set up at ports 7001 and 5133. WLS2 is setup at ports 7004 and 7005.
    When WLS1 attempts to obtain a context to WLS2 with the URL
    t3://10.227.1.34:7004/ it pauses for a long period of time. Running truss
    on the both WLS processes shows communication occuring between the two
    followed by long periods of silence. Finally WLS2 spits out the error
    ConnectionException[7001,7001,5133,5133,7001,7001] (paraphrased, I can get
    the entire error if it would help).
    After another long pause, WLS1 quits trying with the error 'Server
    10.227.1.34:7004 not found' (again paraphrased).
    Among the things we've tried:
    * Changing the URL from the IP to 127.0.0.1
    * Enabling/disabling SSL on either or both WLSs.
    * Changing the server name in WLS2's copy of weblogic.properties from
    'myserver' to 'myserver2' (previously they were both 'myserver')
    * Upgrading WLS2 to 5.1.0sp5 (Tried upgrading WLS1, but was getting class
    not found errors and quit because that WLS is being used by other people)
    This is a Solaris server. WLS1 is running 5.1.0 and WLS2 is running 5.1.0sp5
    Any suggestions would be appreciated.
    Best,
    Randy Yarger
    marchFIRST
    [email protected]
    "Michael Girdley" <[email protected]> wrote in message
    news:[email protected]...
    >
    >
    There should not be. What is your network configuration? Are they on
    separate IP addresses?
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Randy Jay Yarger" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    We're having a problem with communication between two copies of Weblogicon
    the same machine. They are configured with seperate ports (regular andSSL).
    Independantly, they run fine. I can access EJBs running on either of
    them.
    The problem is that a bean in one of them has code which attempts toaccess
    an EJB on the other one. The procude fails when trying to obtain theinitial
    context. This same code works if compilied independantly of WebLogic onthe
    same machine.
    Are there any known issues regards communication between two running
    instances of Weblogic on the same machine?
    Thanks in advance,
    Randy Yarger
    marchFIRST
    [email protected]

  • How can I interact between two different frames in the same indesign template as well as from one template to another.

    I am looking for the best way (or any way) to interact between two different frames in the same indesign template as well as from one template to another. It's for a DPS app which needs to carry some button initiated data from one page to another and then present it in a table.

    There is no simple way to do it, as itunes wont let you use it on another computer without wiping the contents first.
    However if you really want to transfer songs to another computer then you could try this;
    * make sure that your ipod is accessible as a disk drive (ipod options)
    * when you plug your ipod into the computer you want to transfer to make sure you select "no" or "cancel" when it asks to wipe the contents. Leave the ipod connected and quit from itunes.
    * go to "my computer" and access the ipod directly. You probably have to select "view hidden files" from windows. You will see a lot of folders with odd names like ZX838aff with similar named files inside.
    * copy these files to a folder on your computers hardrive. Now remove the ipod and start itunes.
    * import the files from the folder you made in the last step.
    * Now your music is on itunes, but with unrecogisable names.
    This is the only way I have found to do it, but there may be another way, say with an application to do the hard work for you.
    Generic homebuild PC Windows XP
    Generic homebuild PC   Windows XP  

  • Can I have a Face Time conversation between two Apple devices using the same Apple ID?

    Can I have a Face Time conversation between two Apple devices using the same Apple ID?

    Yes, you can, but the two devices can't have the same e mail address associated with both.  Each, device needs its own unique e mail ADR.  In your case, the iPod can call your iPhone if you use the phone number, but the iPhone can not call your iPod because it must use the e mail address, and if the email address is the same on both, the iPhone will think it's calling itself, so the call will not go through.

  • Can you transfer files between two user accounts on the same macbook pro?

    Can you transfer files between two user accounts on the same MacBook Pro?
    Specifically, I used the Migration Assistant to move music and photos from my old PC to my new MacBook. 
    Somehow, I missed the fact that it was creating a new user account when it was doing this.  So none of music and photos are in the user account I originally set-up.  Instead, all these files are now in a different account.
    I'd like to consolidate all my files on the one user account and delete the other one.
    Is this possible and, if so, how do I do it?
    Thank you.

    you can crop files from one account to another using the Public Dropbox which every user account has.  Log into the user that has the files you want to move, then drag the folder you want to the new users' dropbox:
    I suggest a small scale test on a few files first before moving gigabytes of files.

  • Passing multiple parameters between two report portlets on the same page

    Hi,
    I want to pass multiple parameters between two report portlets on the same page.
    I have been succussful passing a single parameter between two portlets. The
    following are the steps :
    (1) Created first report based on the query
    SELECT htf.anchor('http://192.168.0.84:7778/servlet/page?&_pageid=97&_dad=portal30&_schema=portal30&_mode=3&dept_code='||DEPTNO,DEPTNO) Department, ename FROM EMP;
    (2) Created 2nd report
    select * from EMP where DEPTNO = :dept_code
    (3) Added pl/sql code before display page on the 2nd report
    portal30.wwv_name_value.replace_value(
    l_arg_names, l_arg_values,
    p_reference_path||'.dept_code',portal30.wwv_standard_util.string_to_table2(nvl(g
    et_value('dept_code'),10)));
    (4) Created a page and added these reports as portlets.
    Sofar it works fine for one parameter (deptno) . Now I want to add one more
    parameter say empno to my first report query and would like to pass both the
    parameters deptno and empno to the 2nd report. Please tell me how to pass multiple parameters ?
    Thanks
    Asim

    Hi,
    You will have to do the same thing
    The select will be like this
    SELECT htf.anchor('http://toolsweb.us.oracle.com:2000/servlet/page?_pageid=97&_dad=mb&_schema=mybugs&_mode=3&dept_code='||DEPTNO||'&empno='||empno,DEPTNO) Department,ename
    FROM EMP
    In the additional plsql code do the same for empno like this
    mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.dept_code',mybugs.wwv_standard_util.string_to_table2(nvl(get_value('dept_code'),10)));
    mybugs.wwv_name_value.replace_value(l_arg_names,l_arg_values, p_reference_path||'.empno',mybugs.wwv_standard_util.string_to_table2(get_value('empno')));
    Thanks,
    Sharmila

  • How do you get FaceTime to work between two Mac's with the same email address? Thanks, Mike

    How do you get FaceTime to work between two Mac's with the same email address?

    I would like to know the same thing.  How does facetime work between a MacBook Pro and an I Pad that run off the same email address/mac id

  • Share iTunes purchases between two user accounts on the same Mac?

    I have a Macbook Pro, for my bride and I, and a Macbook, for our kids. Both Macs are authorized on my iTunes account.
    So, how can I share an iTunes Store purchased song on my account with my wife's? I understand how to turn on sharing and she can see my songs in iTunes on her account, but she cannot synch them to her iPod.
    Now, I'm allowed to authorize an iTunes account on up to five Macs. I have two. But I have four accounts. Either way, I won't be exceeding five copies, but can't find a way to get a song I bought in my iTunes to my wife's iPod.
    We use the same iTunes account but don't want to have to buy things twice to get them on her iPod. Just seems weird that I could put it on five machines but not two user accounts on the same one.
    Message was edited by: Sky Guy

    On my Mac Pro I moved the entire library to "Macintosh HD/Shared/iTunes". Changed the Folder location in iTunes Preferences->Advanced->General to point to that location. Then in each user change the Music/iTunes folder to be an alias or link pointing to the Shared/iTunes folder. You will likely need to change the permissions on that folder to give everyone the ability to read and write. Do that via "Get Info" on the iTunes folder using Finder. I'd suggest backing everything up before you do this.

  • Can i use ichat between two separate macs on the same mobile me account?

    Can i use ichat over two separate macs on the same mobile me account?
    I have an imac at home and may be getting a macbook for work. Can i use my mobile me account to chat between the two macs or would i need a mobile me account per mac??

    Hi,
    No.
    You need two names that can login into AIM.
    In iChat you can use the Get an iChat Account which shows after you use the Plus Button in Accounts.
    This will give you a free @mac.com Name
    AIM Names are also free.
    9:31 PM Saturday; July 4, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Sharing iPhoto library between two user accounts on the same Mac

    My wife and I each have an iPad and we share the same iMac. We each have our own user account on the iMac. She syncs with her account, and I sync with mine. This works fine in general, but we store all our photos within iPhoto on my account. She is therefore unable to sync the photos to her iPad. The same is true with the music that we keep on the iTunes in my user account.
    Is there a way for her to sync so that the photos and music sync with her iPad also?

    I have used a program called iPhoto Library Manager (http://www.fatcatsoftware.com/iplm/) for years and it has worked like a charm. The program handles all of the permission/subfolder aspects transparently. Our iPhoto library is stored in my wife's default location, but I have seamless read-write access to it. When I open iPhoto, I see the same thing she does, and I have complete control.
    To answer your question about music, there are a couple of approaches. If you turn on Sharing in iTunes, and your wife's iTunes is set to look for shared libraries, she'll be able to have complete access to play anything in your iTunes library (as long as you have iTunes open). I believe she also has rights to copy files from your iTunes library into hers.
    That's great for playback on a Mac, but what you can't do is sync an iPod/iPad/iPhone with someone else's shared library, so here's how I do it:
    1) My iTunes library is our "primary" library, located in my Public folder (where other users have read-access).
    2) In my wife's iTunes, library, I hit keystroke Apple-O to add content to her library, and navigated over to my iTunes Library in my public folder to select it. Once I did this, her iTunes library looked like mine.
    3) The key thing is that under her iTunes Advanced Preferences, I ensure that "Copy content to iTunes library" is deselected. Otherwise, it would make a copy of my entire library on her side, and that would chew up a ton of disk space.
    Note that I don't think it's entirely necessary to have the iTunes library in the Public folder. It could stay in the default location as long as you changes your music folder to have read-access by other users. I moved mine before I knew any better.
    When I add new content to my library that my wife wants, we hit Apple-O from her side and add it to her library. This setup is kludgy, but a) both users can sync the music to iDevices and b) it doesn't require having two copies of everything. Note that unlike the iPhoto Library Manager solution, this is a static thing. You have to manually update the "satellite" library to keep it up to date with the main one.
    I'm not in front of my Mac, so some of my notations may not be completely accurate.
    Good Luck!

  • Sharing/synching iCal between two HD's on the same computer, same computer

    Background: I have cloned my startup disk for Tiger to the second internal HD so that I have a backup when I eventually upgrade to Leopard. I regularly switch between the two for startup to insure changes on one are on the other and they remain identical. But, in keeping my iCal calendar up to date, I find that I need to reenter any new events, etc. on both drives.. in other words, there doesn't seem to be a way to use the same source file when using iCal on either drive.
    Q1: is there any info on where the basic database for iCal is kept so I can simply use that for both?
    Q2 or is there a simple way to .mac to synch the two? The problem here seems to be in the name of my computer since the same name is used on either drive.

    Found a workaround but not sure if it will lead to problems:
    Because I want to keep identical setups for startups including data files on the two internal HD's as described in my original post:
    I have found that if I copy the Source folder in the iCal folder from one HD to the other, the data seems to be ok. the path:
    users -> (user name) -> Library -> Application Support -> iCal -> Sources
    In other words, the Sources folder seems to be the basic data set for iCal events, etc. I can modify, add events, delete, etc from iCal calendars on one Hard Drive and if I copy the Sources folder over to the other hard drive, then iCal on the other HD has the updated set of data.
    Anybody know if this creates a problem?

  • Share an itunes between two separate accounts on the same macbook pro

    My Partner and I share a macbook pro - we both have indidiual accounts.
    Our itunes music is all showing on the iTunes in his account.
    However, I log him out and then log into mine the iTunes is empty....
    Is there a way that we can share the iTunes and the music purchased between our two accounts on our macbook without having to buy all the music again??
    I am not very switched on with the syncing business and the only way I can see around it is to put all the music on a hard drive and then transfer it back onto my iTunes accounts - but I would consider that that method is a little outdated now?

    To give other users read-only access to your library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
    If you want to give full read/write access to more than one user, see the support article linked below.
    iTunes: How to share music between different accounts on a single computer

  • Transition between two different sizes of the same image

    Im currently working on a project where I have a 92x92 pixel image that needs to tween into a 711x300 pixel image.  The images are the same but cropped to these sizes via photoshop, imported into flash, then converted to graphic symbols.  I want to have the 92x92 image tween into the 711x300 image.
    I say tween, but the two tweens aren't working correctly, so I was wondering if anyone else had any ideas.   I can't seem to find a "crop" like function in flash that will let me adjust the large image for when its supposed to be small, then have it tween between the two sizes as i need them to.
    I cant seem to figure it out and I need some help.    Any suggestions?
    Thanks,
    Kyle.

    Right, thats what I have discovered through my troubleshooting.  The thing is, the aspect ratios are different for what I need and I cant seem to find how to readjust the aspect ratio to fit the design sceme that's been chosen.  I initially did just resize the larger one, but since the ratio stayed panoramic, my designs weren't quite working out. 
    I need to change the aspect ratio of the larger image withough disrupting how the image looks (squish/stretch).  When I would chose my symbol and hit cmd+B till I'd get the speckled selection around the symbol, then apply a shape tween between the two symbols.  The smaller symbol would expand to the size i needed as the tween progressed, but would tile the image within the enlarging cell.  Then the tween would end, and my larger picture would appear.  This isn't gonna work, either.
    Still, need some advise.
    kyle.

Maybe you are looking for