Configuring SPF on mail service

Hi,
I want to configure SPF in my Mail Server but I have a row in my mind so strong ... I've been reading a little bit but I dont get a conclussion.
I've created the TXT registry on my DNS zone using the following wizard:
http://old.openspf.org/wizard.html
Well, The problem is in Amavis + Spamassassin and Postfix ... I dont know Where I must configure the SPF filter.
Any idea? I've search in osx.topicdesk.com/ but I dont see anything about that.
Thanks for your help
Álvaro

Hi again,
I add the following line to the /var/named/db.mydomain.es.
;THE FOLLOWING INCLUDE WAS ADDED BY SERVER ADMIN. PLEASE DO NOT REMOVE.
$INCLUDE /var/named/zones/db.mydomain.es.zone.apple
mydomain.es. IN TXT "v=spf1 a mx a:IP_MAILSERVER1 a:IP_MAILSERVER2 ~all"
but ... when I execute:
nslookup -type=TXT mydomain.es
I can see the following response:
* Can't find mydomain.es: No answer
Is it no well created the TXT register in the zone?
However if I execute an domain that I know that has implemented SPF, I can see the following:
nslookup -type=TXT alt.com
Non-authoritative answer:
alt.com text = "v=spf1 ip4:208.88.176.0/21 ip4:216.34.38.64/26 -all"
Thanks ...

Similar Messages

Second mail service configuration or others transport protocols to send form content

Hi
we actually use the mail service for several forms. We have now a new requirement, where we need to use a different target for one specific reporting form.
Questions are:
Is it possible to configure a second mail service (other mailhost)?
Is it possible to integrate others transport protocols to send the content (SOAP/REST Webservice calls, JMS Queue Producer, externe HTTP/POST calls)?
Do you have another suggestion?
Thank you
Best regards
Stéphane

Hi Stéphane,
* AFAIK not possible with OOB to configure 2 mail servers & need to implement at project level. You might need to create a custom email service. Example http://helpx.adobe.com/adobe-cq/using/creating-custom-cq-email-services.html
* One of the option to make external calls is to utilize WorkflowExternalProcess http://dev.day.com/docs/en/cq/current/javadoc/com/day/cq/workflow/exec/WorkflowExternalPro cess.html
Thanks,
Sham

Mail services 10.4.10 refuses to work.

Hello,
I'm a newbie to OS X, so please help - I need to get
a local eMail system going here in the office, and it
just doesn't want to work.
I've been to every site imagineable searching for answers
on how to configure OS X Mail Services, but it still
doesn't work.
DNS:
- I have DNS running on this server,
- I've checked "This machine is a mail server for the zone" for the server,
- I've added aliases "pop3", "smtp", and "mail" for the server.
User accounts:
- Open Directory seems to be running, although "start service" is greyed-out,
- this is an "Open Directory Master",
- I've checked "Enable Secure Sockets Layer" on the Protocols tab,
- I've checked all the encryption options in the Policy->Security tab.
Workgroup Manager:
I followed some tutorial to create the directory "/LDAPv3/127.0.0.1",
and added the user "dspratling" to it, which DOES show up in the
Mail Services automagically.
I'm only looking to create Mail Users ("dspratling" for starters),
but trying everything, I created a Home directory for this user,
since I was getting error messages in the LDAP log saying: "... object
class 'posixAccount' requires attribute 'homeDirectory'.
- I have checked the "Mail: Enabled" under the Mail tab,
- I checked "POP only" under Mail Access,
- I put "mail.mme.lan" for the Mail Server.
- Under the Advanced tab, I have User Password Type selected as "Open Directory".
Error Messages appearing in the logs:
Other error messages in LDAP log include:
"slapd[59]: SASL [conn=3740] Failure: GSSAPI Error: Miscellaneous failure (No principal in keytab matches desired name)"
kdc Log has:
"xserv.mme.lan krb5kdc[296](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) 10.0.0.9: ISSUE authtime 1195081950, etypes {rep=16 tkt=16 ses=16}, [email protected] for krbtgt/[email protected]"
kadmin Log has:
"xserv.mme.lan kadmin.local[22270](info): No dictionary file specified, continuing without one."
however, good news in the "Password Service Server Log":
"RSAVALIDATE: success"
and
"AUTH2: {0x000000..., diradmin} CRAM-MD5 authentication succeeded."
Now, in the Mail logs...
Mail Access log has:
"xserv master[23575]: empty option value on line 19 of configuration file"
and
"xserv master[23575]: exiting"
POP log has:
"xserv pop3[23444]: AOD: getting mail attribute for user: dspratling
"xserv pop3[23444]: AOD: mail enabled"
"xserv pop3[23444]: AOD: mbrcheck_servicemembership with accessallservices"
"xserv pop3[23444]: AOD: checkServiceACL: Mail SACL not enabled"
From the Client-side (MacMini 10.4.10), it reports "The server "mail.mme.lan" refused to allow a connection on port 995."
All other network-based services work fine with the server, even in our
heterogenous PC network - only the Mail Service is not working.
Please - ANY SUGGESTIONS WOULD BE APPRECIATED
Thanks,
Dylan

Brett -
Thanks for the suggestions. This is not an internet-facing
server, however. Strictly intra-office eMail is all I'm after
for now. The DNS works well, resolving "mail.mme.lan" to the
correct IP (via the CL "host" command), and the CL "named-checkzone"
command returned OK as well. I haven't changed the DNS for weeks,
so I'm quite sure every cache has been refreshed.
I'm going with "Plan B", until this can be resolved ...
And I know it's pure evil, but: "Parallels -> Win2K -> mailEnable"
I got it configured and working in minutes. (Parallels was already
running on this server, serving printers, and mailEnable was free
Would still rather not depend on MS.
Thanks,
Dylan

ERROR: Cannot start mail services, configuration directory does not exist

I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
Is this something to worry about?

Hi Joel,
You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
Jeff

How to configure Mail Services in B1

Hi All,
I want to cinfigure the mail services in SAP B1 currently I am using SAP 2007 SP00 PL 12 My client wants that the daily reports and the Sales order should be mailed by B1 to cuntomer mail id. PLease tell the process to how to configure mail services in B1.
Thanks & Regards
pankaj Sharma.

Hi Pankaj Sharma,
The suggestion above would be a good solution to you. However, if you do not want to use this add-on, you may just configure SBO-Mailer to perform the task. You may check all available setting for the mailer and read through Administrator Guide for how to set it up.
Thanks,
Gordon

How to configure mail service in DRM 11.1.2.3.500

How to configure mail service in DRM 11.1.2.3.500.
There is a feature in Workflow Models to Notify users by sending mail.
Can anyone help me find from where to configure mail service.

Hi,
If you open up the Configuration Console on the DRM Server you should be able to navigate to the second tab called "Host Machines".
From there, select SMTP Server - and enter the details for your SMTP server. You've now configured DRM to send emails... now you just need to add it into your workflows...

Mail Service - configuration.

Hi everyone,
this is my first post
on this forum so greetings to all.
<br
/>Question:
How to run Mail
Services on Primavera?
My
Primavera 6.1 is working on Windows 2003 SB Server. On
this machine I've install smtp service and configure an
account form primavera to use as e-mail from witch
notifications will be send. In Primavera administration
I've set the Mail Service with proper settings. I've turn
on notifications.
Thats all <br
/>
Thanks for all reply and sorry for my
poor English knowledge.

Hello,
I recommend that you
contact Support, which can be reached at
http://primavera.com/customer/support.asp.<br
/>
A Support Representative can walk you
through the e-mail configuration for P6.<br
/>
Have a great day,
Justin

Error during configuring mail Service

Dear BASIS Gurus n Experts,
Can we configure the mail services on SAP without having a exchange/mail Server.
For this I have tries following but it is not working:
In Systems Default profile I have added: icm/server_port_1 PROT=SMTP,PORT=25,TIMEOUT=180, than
1. Used transaction SCOT
2. From top menu: View -> System Status
3. Double Click on SMTP
4. In Pop window entered description
5. Ticked on "Node in use" box
6. Entered the SMTP server name
7. Entered port 25
8. Clicked on the button next to Internet called "Set"
9. On next window Enter the * in "address area" box.
10. Click Continue --> Continue buttons to exit the main window
11. From top menu: Settings -> Default Domain enter the domain name as "companyname.com"
12. Now defined the job to process the mail, from top menu: View -> Jobs
13. From top menu: Job -> Create
14. Enter a name as SMTP
15. Click on "INT" in the list then "Schedule job" button
16. Entered start date and time, then click on "Schedule Periodically" button
17. Entered 10 minutes.
Now I create a message in workplace, and send it to a mail id but get an error message:
Definately cannot transfer message to node SMTP due to connection error
Please Guide me where I am wrong.
Thanks in advance. Early response will be highly appreciated.
DSC

Dear Venktesh,
In SMICM --> Go to service, I found two entries:
No. Protocol               Service Name Port                     Host Name                    Time Out           active        Ext. Bind
1.     HTTP                   8000                                            Development                60                    X                X
2.     SMTP                  2500                                            Development                180                  X
When I try to send a mail I found following error:...
Definately cannot transfer message to node SMTP due to connection error
Message no. XS816
Diagnosis
Due to a technical fault, the system could not set up a connection to the RFC destination Check port and mail server for SMTP nodes. Therefore, the message could not be transferred to node SMTP.
System Response
The system was unable to transfer the message.
Additional information of the node used (in the system language of the node):
Procedure
Check the connection from R/3 to node SMTP. Perhaps the node is not assigned to the correct RFC destination. If so, correct this in Customizing.
Otherwise use RFC destination management to check the RFC connection to destination Check port and mail server for SMTP nodes.
If R/3 is in productive operation, it is advisable to reroute provisionally to another node.
You should therefore notify your system administrator.
Please suggest.
With thanks,
DSC

SAP J2EE engine for configuring Java mail Service.

Hi
I am experiencing following exception when trying to use JAVA mail API.
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 554 <email@ddress>: Recipient address rejected:
Relay access denied
email address above is valid..
I have to use SAP J2EE engine for configuring Java mail Service.
But is does not hav any such access permissions to check....!!

Relay access denied
To send mails from SAP system through the mail server which you have configured, SAP server should be permitted to relay through the mailserver. Then only you will be able to send mail to external email address. Otherwise, you will get the above message.
You must contact the mail server administrator and ask him to add the ip of SAP server into the allowed relay list.
If you are using MS exchange server as your mail server and if you have administrative access to the Exchange box, you can do it yourself by following the below steps:
1.Verify that your Exchange computer is not an open mail relay. To do this, follow these steps:
a.      Click Start, point to Programs, point to Microsoft Exchange, and then click System Manager.
b.      In Exchange System Manager, expand the following object:
Servers\Your_Exchange_Server_Name\Protocols\SMTP
c.      Right-click the virtual SMTP server where you want to prevent mail relay, and then click Properties.
d.      Click the Access tab, and then click Relay.
e.      By default, open relay is blocked. The default settings are as follows:
u2022     The Only the list below check box is selected.
u2022     The Allow all computers which successfully authenticate to relay, regardless of the list above check box is selected.
f.      If you must permit a single computer, a group of computers, or a domain to relay through the server, click Add. In the Computer dialog box, click the appropriate selection for the computers you want to relay through the server. Then, type the required information.
Note Enabling access by IP address or by domain name is helpful for users who do not authenticate with the Exchange computer.
g.      In the Relay Restrictions dialog box, click OK.
h.      Click Apply, and then click OK in the Default SMTP Virtual Server Properties dialog box.
hope this helps you out...
Cheers,
Jazz

Problem in configuring mail services

Hello all,
I am configuring my system for automated mail sending.
WebDynpro provides functionality to incorporate such services.
I have followed WebDynpro guidelines for creating a mail service, but while entering WSDL description as
http://webservices.matlus.com/scripts/emailwebservice.dll/wsdl/IemailService
it gives error saying , please enter proper WSDL.
I also tried to download the same WSDL on local machine and pass it as a parameter. But while compiling some classpath error appears.
Please guide me on that.

Hi,
As you can see the wdsl file in the browser when you type the URL, I don't think it is a problem with the URL.
To check if it is the problem with the NetWeaver Studio you can check it with a web service in the local machine or the server. I think there are some examples webservices like car rental services that come with the installation.
From what I learnt from one of my senior is that it might be a problem due to the proxy connection that you use to connect to the internet. Please verify if the proxy allows you to use the web service.
Regards
Noufal

How to configure lion mail service with lion server settings

I've sucessfully setup outgoing mail but I keep getting "The server returned the error: The server "incoming.domain" cannot be contaced on port 110". What configurations for Lion Server and Mail incoming mail server do I need to receive mail?

Please also see:
How To Configure Workflow Notification Mailer To Send Email Notification For Only One Workflow Item type/Process? (Doc ID 786647.1)
Configuring A Notification Mailer Based On A Specific Item Type. (Doc ID 415723.1)
After Upgrade R12.1.3 All Alerts Are Completing With Signal 11 (Doc ID 1438919.1)
Oracle Alert Response Processing Is Not Working After R12.1.3 Upgrade (Doc ID 1505620.1)
Thanks,
Hussein

How to configure workflow mail service..

Hi Experts,
How to configure the workflow mail server.
I will tell you my requirement,
i have to configure email notification for oracle application R12.1.2 , all the emails related to administration should go to one email id, this email id is of gmail. I am not able configure it.
Oracle application : 12.1.2
Oracle Database : 11.1.0.7
Please help me.
Regards,
Mohd Mohtasham Jeelani

Please also see:
How To Configure Workflow Notification Mailer To Send Email Notification For Only One Workflow Item type/Process? (Doc ID 786647.1)
Configuring A Notification Mailer Based On A Specific Item Type. (Doc ID 415723.1)
After Upgrade R12.1.3 All Alerts Are Completing With Signal 11 (Doc ID 1438919.1)
Oracle Alert Response Processing Is Not Working After R12.1.3 Upgrade (Doc ID 1505620.1)
Thanks,
Hussein

Why cant i disable mail service ?

Mail service got enabled when I enabled some other services (don't know which one) i checked a couple and it got enabled, i tried to disable it then but it wouldn't let me, back then i didn't pay much attention to it so of course it's not configured. Right now the server is going crazy with disk IO, ran iotop and found out there are 2 processes to blame, 1 is mds (i'll murder spotlight soon) and the other is qmgr which from the man page i found it's mail related, my mail is hosted on gmail so i have no intention of using this service. If i click stop nothing happends, same if i uncheck it under services.
this is the ouput on the syslog when i try to stop
servermgrd[69]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) syncClientServicesConfigRecord]: Error writing ClientServices config record: Error Domain=com.apple.OpenDirectory Code=4001 UserInfo=0x10652ad30 "Unable to set value or values for dsAttrTypeStandard:XMLPlist in the record ClientServices."
servermgr_info: markrunning_servicesconfigured(): marked running services configured: com.apple.ServerAdmin.DNS, com.apple.ServerAdmin.SWUpdate, com.apple.ServerAdmin.Web, com.apple.ServerAdmin.NFS, com.apple.ServerAdmin.DirectoryServices
also, my syslog is full of
postfix/qmgr[3830]: warning: connect #1 to subsystem private/rewrite: Connection refused
I'm guessing it's required by some other service, i currently have...
DNS
Mail -> DIE
NFS
Open Directory
Software Update
Web
Xgrid - Stopped ( just testing )
Is there any way to kill it, or is my only way around it to figure out what's wrong with it (no one is using it for mail so i don't get why is it so busy).

Unchecked 'Enable SMTP', 'Enable IMAP' and 'Enable POP', then checked 'Deliver to /var/mail
That seemed to 'disable the mail service'
As for disk usage, i'm running a cron job every minute so que queue had close to 6k mails it couldn't deliver. deleted them all " sudo postsuper -d ALL " and redirected output on the cron job to /dev/null

Problem while configuring email system in service desk message

Hi all,
I have configured my soution manager service desk for sending emails to the key user when the message status changes from New to In process.Now i want that a mail should go to the message processor when the message is assigned to him.For that i will have to define a new action but the issue is which smart form do i need to assign to that action.
Regards
Praveen

Hi Praveen
I am also doing Service Desk config. Can u please tell me how u configured External system. I was able to send messages internally. but from Other systems in landscape i am not able to. I f u have any document from end to end please send me.
Points will be awarded for the solution.
Rajesh

Mail server log says: master[50]: ERROR: Cannot start mail services...

Recently, after a year or more of relatively smooth service, my OS X Server 10.4.11 Mail services has been locking up daily.
I was finally able to get some information from the log files (I am a noob to this) and saw the following right after my most recent reboot of the server:
Oct 5 09:51:11 mm1 master[50]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/Data/mail/var/imap
I checked the server and that directory is indeed there on the partition named "DATA", so I am baffled as why the server does not thing the configuration directory exists?
drwxr-xr-x 15 cyrusima mail 510 Oct 5 09:51 imap
drwxr-xr-x 15 root admin 510 Oct 3 20:01 imap.BAK
drwxr-xr-x 15 cyrusima mail 510 Oct 3 20:05 imapold10032009-200707
drwxr-xr-x 4 jkoerber admin 136 Dec 3 2007 spool
mm1:/Volumes/Data/mail/var jkoerber$
Can anyone help me? My customers are yelling for blood because they cannot send/receive emails.
-- Jon
Message was edited by: Jon Koerber

Thanks Alex for the feedback. You are helpful as always!
It's good to know that the message I am getting from the mail server about the configuration files is only a temporary thing. Although I find it strange that the mail service doesn't know where its config files are since it is specified in the mail server setup.
I looked at the log files you mentioned and do not see anything that looks like a specific problem with the mail services themselves.
Recently, however, I have been having recurring problems where my mail server and my Web/Database server have both become unresponsive at nearly the same time even though they are on different class A networks to where I cannot access them via ARD, Server Admin and even SSH. That is usually when my mail server goes offline. I was afraid it was because of that configuration error I was seeing, but think now that the problem could be something else entirely (maybe some kind of network problem or denial of service hacking attack, no idea).
Thanks again.
-- Jon

Configuring SPF on mail service

Similar Messages

Maybe you are looking for