Configuring steps in RSPOR_SETUP has stopped direct logon to Portal

Hello All,
I have a error which appears to have occured while I was performing steps in the STRUSTSSO2 tcode as part of the steps in the RSPOR_SETUP report. I could access the portal / netweaver administrator fine before and had verifed most of the steps in the Problem Analysis document attached to note 917950. We have a double stack system BI 7.0 system. I am able to access some of the web pages like the system information with the j2ee_admin userid.
The logon page appears okay but on entering the password it does nothing apart from wipe the password. If I use an incorrect password it does fail authentication.
Any assitance on this would be greatly appreciated
With regards,
Steven

Hi Paul,
This issue was caused because when I recreated keypair on the Java side in Visual administrator I had a typo. It is also case sensitive.
After this has been recreated then you can export the key and import into strustsso2
Hope this helps.
With regards
Steven

Similar Messages

My E pad has stopped directing me to my att/yahoo e mail. It gives me a notice that i must go to Settings, Safrai and turn off Private Browsing. I have tried for 2 days to find private browsing on my safrai site, and it is just not there.

Forsome reason, after two years, my E Pad is refusing to go to my att.Yahoo e mail...It says to go to Settings Safari Private Browsing and turn off Private Browsing. There is not place on the Safrari page that gives me Private Browsing. It explains it as being dark when turned on, but no place to turn it on or off. Also it seems to go to Yahoo Mail instead of Att..Yahoo when it gives me the above message....Any One know what todo?

As of iOS 7, private browsing is not longer handled in the Settings app, but in Safari directly. The only Settings function for Safari that may impact this would be Block cookies.
Private browsing is turned on and off in Safari using the button in teh lower left of the Safari screen (if you do not see this, tap the + icon in the upper right to pull up an empty tab).

I uninstalled Itunes because message "Itunes has stopped working" i attempted to reinstall now get error message "error occurred during installation before itunes could be configured" how to i fix for windows 8.1

I have a PC with windows 8.1. My itunes folder is stored on external drive. I haven't used itunes for a while. I got a message to update to itunes 11.3.1. I got error message that "registry settings used by itunes for importing and burning CD's/DVD's has stopped working" I uninstalled itunes and attempted to reinstall. Now i get message" error occurred during installation before itunes could be configured" How do I fix this.

See Troubleshooting issues with iTunes for Windows updates.
tt2

ITunes has stopped working. It get to step number 5 when syncing my Iphone then it stops working

I am having problems syncing my Iphon5S in ITunes. It gets to step 5 and ITunes will quit working. It says it has stopped working and will let me know when there is a solution I've tried uninstalling and reinstalling it. Then I uninstalled Quick Time and reinstalled it and ITunes. Didn't help.
Help

The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!!

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!!

My Itune match doesn't work. When it tries to update, it stalls on step 3. If I don't cancel it, I get a window saying "Itunes has stopped working" and the program shuts down. How can I fix this???

When my Itunes Match tries to update, it stalls every time on the third step "Uploading remaining songs and artwork". If I don't cancel it, very shortly I get a message saying "Itunes has stopped working" and then Itunes shuts down completely. Is there a fix for this? I have the most recent version of Itunes. HELP!

Hi The Funkster,
The resource below will provide some initial troubleshooting for the issue you are having uploading songs and artwork to iTunes Match.
How to troubleshoot iTunes Match - Apple Support
http://support.apple.com/en-us/TS4054
I hope this information helps ....
- Judy

Kinect Configuration Verifier has stopped working

Hello Guys,
I'm trying to set up my Kinect v2 and I keep getting a crash with the KinectV2 Configuration Verifier. When I run the exe it instantly stops on the main screen.
I'm not able to click anything on that screen.
Shortly afterwards I get the following crash KinectV2ConfigurationVerifier.exe has stopped working.
Full log from the crash:
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: KinectV2ConfigurationVerifier
Problem Signature 02: 2.0.1410.16000
Problem Signature 03: 5441126a
Problem Signature 04: System.Management
Problem Signature 05: 4.0.30319.33440
Problem Signature 06: 520042ce
Problem Signature 07: da
Problem Signature 08: 3f
Problem Signature 09: System.Management.Management
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 2108
Additional Information 1: 5861
Additional Information 2: 5861822e1919d7c014bbb064c64908b2
Additional Information 3: a10f
Additional Information 4: a10ff7d2bb2516fdc753f9c34fc3b069
Any help would be greatly appreciated!
===============
Computer Specs:
Operating System: Windows 8.1 Pro 64-bit (6.3, Build 9600) (9600.winblue_r5.141029-1500)
System Manufacturer: MEDION
System Model: X681X
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7 CPU Q 740 @ 1.73GHz (8 CPUs), ~1.7GHz
Memory: 4076MB RAM
Available OS Memory: 4076MB RAM

Thanks for your reply Carmine. There have been no other SDK installs or runtime updates recently. I have run a full uninstall of the SDK and the Verifier. Rebooted. Reinstalled the SDK. Rebooted. Reinstalled the verifier. Connected the Kinect then ran the
verifier resulting the the same crash. I debugged the crash and got the following output from VS2010:
============
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Program Files (x86)\Microsoft Kinect Configuration Verifier\KinectV2ConfigurationVerifier.exe'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework\v4.0_4.0.0.0__31bf3856ad364e35\PresentationFramework.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\WindowsBase\v4.0_4.0.0.0__31bf3856ad364e35\WindowsBase.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_32\PresentationCore\v4.0_4.0.0.0__31bf3856ad364e35\PresentationCore.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Program Files (x86)\Microsoft Kinect Configuration Verifier\en-US\KinectV2ConfigurationVerifier.resources.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework.Aero2\v4.0_4.0.0.0__31bf3856ad364e35\PresentationFramework.Aero2.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Program Files (x86)\Microsoft Kinect Configuration Verifier\Microsoft.WindowsAzure.Storage.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\UIAutomationTypes\v4.0_4.0.0.0__31bf3856ad364e35\UIAutomationTypes.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'Microsoft.GeneratedCode'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll'
'KinectV2ConfigurationVerifier.exe' (Managed (v4.0.30319)): Loaded 'C:\Program Files (x86)\Microsoft Kinect Configuration Verifier\EnumUSB.dll'
An unhandled exception of type 'System.Management.ManagementException' occurred in mscorlib.dll
Additional information: Invalid parameter
The program '[5616] KinectV2ConfigurationVerifier.exe: Managed (v4.0.30319)' has exited with code 0 (0x0).
===========
Also I have just check the driver for the Kinect and the "WDF KinectSensor Interface 0" driver has a yellow exclamation beside it. My Kinect does not seemed to be turned on. It's connected to a 3.0 usb slot but the usb slot doesn't have a super
speed symbol on it like the Kinect adapter does, could this cause problems?

Setupccrt.exe has stopped working on Oracle Configuration Manager

I have installed Oracle 11gR2 every thing was fine but at the end when it was cofiguring Oracle Configuration Manager. I got folloing error
setupccr.exe has stopped working.
I am unable to sort it out but my database is working fine and I started working on APEX 4 with oracle. but i am still concerned about this error.
If any one can tell me what i shuold do so that this prob can be solved.
Thanks
Regards
Mazahir Abbas

Thanks for you suggestion, and you right now i am going to put this question on DBA forum, so tht i can get the results.
also thanks for the link, i also found this link when i was searching to soft out this problem, but it was not helpful.
Regards
Mazahir Abbas

HT1414 In syncing my iphone to my itunes account, it proceeds fine until step 6/6 music. Then there is a message that I tunes software has stopped working. This has happened multiple times. I am on a windows 7 Dell laptop. Thank you.

I keep getting the same error message when syncing my iphone in itunes with my windows 7 Dell laptop: The software has stopped working and will be shut down. Can anyone help?

Hey preachit,
It sounds like we are running into issues with the iTunes software connecting to your device. If possible, lets try plugging your iPhone 5 in with a different cable. Also, try plugging it in to a different USB port on your computer:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
We may need to isolate the issue down to the iPhone or the current installation of iTunes. If the above steps have not resolved your issue, remove and reinstall iTunes:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
Thanks,
Matt M.

"itunes has stopped working" - when syncing 4s, itunes stops at step 6.

Since updating to 10.5.1.42 itunes stops at step 6 - determining tracks to sync - when syncing with my 4S. The iphone is running 5.0.1
I've uninstalled and reinstalled itunes, but it still does it! Windows 7 gives me the 'itunes has stopped working and is searching for a solution' line.
Needless to say; it doesn't find one...

Here is what worked for me for both 10.5 and 10.5.1 after hoursof frustration with Itunes stopping and shutting down in the middle of a syncor tranferring Apps downloaded on my Ipad2 or Iphone 4:
Start iTunes in iTunes Safe Mode:
1. hold down the Shift and Control key together and clickto start iTunes.
2. when you see the iTunes icon in the task bar, click onit.
3. you will get a box that says "iTunes is running insafe mode. Visual plug-ins you have installed have been termporarilydisabled." [I don't know what plug-ins I installed but youshould clearly see that these so-called visual plug-ins are likely the cause ofyour issues];
4. click Continue to open iTunes.
You could already have your device connected to your computer ordo it after opening iTunes in its safe mode.
Now press your sync button and everything should work fine.
I also disabled Genius in iTunes preferences but I'm not sure ifthis is one of the issues causing these types of problems.
I hope this works. This may be the workaround for all ofus Windows 7 64-bit folks.

While syncing my I phone it gets to step six "optimizing " and gets almost to the end and I get a message that itunes has stopped working and has to close. it get to like 1074 of 1138 items to optimize when iTunes quits. Any suggestions on how to fix this

While syncing my I phone it gets to step six "optimizing " and gets almost to the end and I get a message that itunes has stopped working and has to close. It get to like 1074 of 1138 items to optimize when iTunes quits. Any suggestions on how to fix this?

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

HT1386 My Iphone has stopped importing new photos to my computer when I connect and does not show a photos option under the device when in itunes. I don't have any access to the photos except directly through the phone.

It seems after my latest upgrade that my phone has stopped importing new photos and vids when I link up to my computer. It always would ask me if I wanted to tag new photos and then would import to computer. Now it does not and when I am in Itunes the options under my device does not include photos so i can't even import them manually. Any ideas on what is up?

iTunes doesn't import photos from your device, in only syncs photos from your computer to your device.
You may need to adjust your autoplay settings as outlined here: http://support.apple.com/kb/TS1500 (except to enable digital camera notification, not disable it) in order to restore automatic prompts to import photos.

HT1414 my top button has stopped working since the ios7 update can you help the shop said its not directly the button as its clicking properly

my top button has stopped working since the ios7 update and the shop said the actual button is working ok does anybody have an answer for this

i found out my prob!
here is what you do.
go to the "system preferences" on your dock.
click "software updates".
click "installed software"
if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
go to mail.
click "mail" at the top.
click "preferences...".
find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
hit the "+" (right next to the "-") and add your accout back!
its something with that update that effected mail, i hope this works out for you, if not reply back

ITunes has stopped working - iTunes 12.1

I just updated iTunes 12 to 12.1 on two Windows 7 x64 systems. On both systems, iTunes fails to run now although 12.0 ran perfectly.
Upon clicking on the iTunes program icon, I get a dialog:
          Runtime Error!
          Program: C:\Program Files\iTunes\iTunes.exe
          This application has requested the Runtime to terminate it in an unusual way.
          Please contact the application's support team for more information.
This is followed by a second Windows crash dialog on my first system:
          iTunes has stopped working
          Problem Signature:
                Problem Event Name:                APPCRASH
               Application Name:                       iTunes.exe
               Application Version:                    12.1.0.71
               Application Timestamp:              54c76235
               Fault Module Name:                    KERNELBASE.dll
               Fault Module Version:                 6.1.7601.18409
               Fault Module Timestamp:            5315a05a
               Exception Code:                          c000041d
               Exception Offset:                         000000000000940d
               OS Version:                                 6.1.7601.2.1.0.256.48
               Locale ID:                                   1033
               Additional Information 1:             b956
               Additional Information 2:             b956b0c787c12b5653b9ee496e31c42e
               Additional Information 3:             2fe2
               Additional Information 4:             2fe2087e98073ca074b5d037e75ccb2c
On my second system, there is a slightly different failure:
          iTunes has stopped working
          Problem Signature:
                Problem Event Name:                APPCRASH
               Application Name:                       iTunes.exe
               Application Version:                    12.1.0.71
               Application Timestamp:              54c76235
               Fault Module Name:                   btmmhook.dll
               Fault Module Version:                6.3.0.6300
               Fault Module Timestamp:          4c5239cd
               Exception Code:                         40000015
               Exception Offset:                        000000000001a3ee
               OS Version:                                6.1.7601.2.1.0.256.48
               Locale ID:                                   1033
               Additional Information 1:             87cb
               Additional Information 2:             87cb48742dd7844ff1df33721f990ecd
               Additional Information 3:             9d5c
               Additional Information 4:             9d5c064844e6d8e27291889a991b03f2
None of these failures ever occurred previously with my configurations (including 12.0) with iTunes. And no, the video compatibility version (64-bit installer with 32-bit payload) doesn't fix these problems either. And I cannot find any copy of the 12.0 version to revert to!!!
Clearly this update wasn't sufficiently tested before being released. Help!!!!
          - Dov

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

Configuration steps to integrate javaSSO & OBIEE

Hi,
Environment: OAS,javaSSO,OBIEE
I'm trying to implement javaSSO(from OAS) for BI Presentation(OBIEE)
I just want to know how to configure OBIEE and javaSSO.
I have gone through several forums and blogs to configure OAS javaSSO and OBIEE but was unsuccessful.
--> note: userAuthentication tables are in DB, we don't have OID.
can any one please provide us any blog link or site for the steps to implement.
Thanks
vik

--> Can you please specify what do you mean by specifying login url in instanceconfig.xml
<SSO enabled="true">
<ParamList>

<Param name="IMPERSONATE"
source="serverVariable"
nameInSource="REMOTE_USER"/>

<Param name="NQ_SESSION.LOCALE"
source="cookie"
nameInSource="SSO_LOCALE"/>
</ParamList>

<LogoffUrl>http://mycomany:7777/jsso/SSOLogout</LogoffUrl>
<LogonUrl>http://mycomany:7777/jsso/SSOLogin</LogonUrl>
</SSO>
--> I didnot create any init blocks for SSO.
-->but I created init blocks for Authentication (using DB tables)
can you please elaborate this point.
--> When I am trying url for analytics
http://mycomany:7777/analytics
it is taking me to the analytics login page.
I can successfully login into the Answers
But How can I know whether this is using SSO or not. how to monitor
May Be I am confused, can you please tell me How exactly this SSO Works.
our requirement is
we have 2-appliactions ((java App) App1 and (OBIEE analytics app) App2 ), both are deployed in same Oracle Apps.
now we have 2- seperate Login Pages, we want implement SSO, where in we have a login page --> after that you have a page where these 2- applns links will be there , and when i click on these links it should not ask for credentials it has to directly
our user credentials are in DB.
Can you please suggest how I can implement above scenario.

Configuring steps in RSPOR_SETUP has stopped direct logon to Portal

Similar Messages

Maybe you are looking for