Configuring sticky cookie in CSS-11500 for BEA Weblogic servers

Hi,
I'm configuring a couple of CSS11503 to load balance traffic for Weblogic web servers. I'm trying to apply persintence based on cookies. By default, Weblogic server generates cookies with the following format:
JSESSIONID=sessionid!primary_server_id
where "JSESSIONID" is the prefix, "sessionid" is the string generated for the session ( 52 bytes long - fixed - ), "!" is a delimiter character and "primary_server_id" identifies the server generating the cookie ( 10 bytes long - fixed -).
Has anybody faced a configuration scenario involving these elements ( CSS and weblogic )? If so, how should I configure my CSS11500 to stick clients based on cookies? How can I know the primary_server_id? I'm particularly interested in the string commands I need to configure.
Thanks in advance,
Enrique

Enrique,
To match on the primary_server_id, your string commands would need to look something like this:
string prefix "JSESSIONID="
string skip-length 53
string process-length 10
The primary_server_id would need to be configured with the 'string' command for each service.
You can find complete configuration information here:
http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_example09186a0080093de2.shtml
~Zach

Similar Messages

Trouble defining BAM Enterprise Message Source for BEA WebLogic Server

Hi all,
I've just started to play a little with Oracle BAM Architect.
I've WLS 10.0 and Oracle BAM Architect 10g release 3.
On Oracle BAM Architect I've defined an Enterprise Message Source for BEA WebLogic Server as follows:
Name: ALSBSource
Owner: ...
Type: BEA WebLogic Server
Initial context factory: weblogic.jndi.WLInitialContextFactory
JNDI Service Provider URL: t3://mypc:7001
TopicConnectionFactory name: com.myConnectionFactory
Topic name: com.myBAMTopic
JMS message type: TextMessage
Durable subscriber name: BAMSubscriber
Client ID: BAMSubscriber
Name | Flow name | Type | Max size | Formatting
content | BAM | String | 1024 | (none)
On WLS 10.0 I've defined the required JMS stuff.
On Oracle Design Studio I've defined a plan that includes:
- an Oracle BAM Enterprise Message Receiver from which I've selected the above 'ALSBSource' Enterprise Message Source
- a simple Grid
I've connected the BAM Enterprise Message Receiver to the Grid and clicked on 'Update' button.
When I try to publish a message on 'com.myBAMTopic' I don't see anything on the grid defined in the Oracle Design Studio.
The first question is about the definition of an Enterprise Message Source for BEA WebLogic Server in the Oracle BAM Architect.
I did not change the Oracle BAM Architect classpath or Oracle Design Studio classpath adding the weblogic.jar, because no error has been raised during the configuration of the message source and the plan. Should I update Oracle classpath with the weblogic.jar ?
Did I forget any other step ?
I thank you in advance for any feedback.
Regards
ferp

ferp - I got this to work with
JNDI Service Provider URL: http://localhost
When I add the port
JNDI Service Provider URL: http://localhost:23891
I cannot get my EMS to start.
Hopefully this should fix your issue.
Sudeep.

Developing plug-ins for BEA Weblogic Studio

Can anyone provide pointers on documentation on developing plug-ins for BEA Weblogic Studio (e.g like this one https://beajunitplugin.projects.dev2dev.bea.com/ )
Regards,
-N

film leaders clips can be downloaded online if you dig around a bit ... Peter Wiggins has a nice Motion Template clock he offers for free (which is a bargain by anyones reckoning)
easy enough to create your own film leader style countdown with a few back to back text generators separated by clock wipe transitions
color bars can already found in your fcp video generators bin
color bars and a film leader style countdown can also be auto generated during output (print to video and edit to tape)
distort faces and license plate like they do on tv? ... ok i give up, what do you mean? if you mean you want to disguise them (Mosaic, Blur etc) then you can have a bash with my Region Blur plugin
Message was edited by: Andy Mees

I need to download the server runtime for BEA WEBLOGIC server

Hi ^^,
I am trying to create a web project in Eclipse WTP europa. I do not have the bea weblogic server installed on my desktop. My organization has issues running it locally. I need to first create a project and then create a war and then deploy it on server.
I am going through the tutorial at the following website:
http://www.eclipse.org/webtools/community/tutorials/BuildJ2EEWebApp/BuildJ2EEWebApp.html
It says "To do this tutorial you will need a server runtime that is supported by WTP"
Also "During web application development, we will need a server runtime environment to test, debug and run our project".
Hence I need the link where I can download the server runtime for bea weblogic server.
T&R,
Prashant

Crossposted over all places:
[http://forums.sun.com/thread.jspa?threadID=5347690]
[http://forums.sun.com/thread.jspa?threadID=5348001]
[http://forums.sun.com/thread.jspa?threadID=5348002]
Don't crosspost. It's very rude.

AMA Search Rule Files For BEA Weblogic

Hi friends,
I am looking for AMA search rule files for BEA weblogic.I downloaded this from http://www.oracle.com/technology/tech/migration/ama/exchange/download_bea.html.But I am not able to add it to the AMA Tool in Oracle Jdeveloper.I browse for XML file and click on ok,it hangs.
Can somebody tell me,what could be the issue.
Thanks,
Aparna

./stopWebLogic.sh[33]: -Xms256m: not found.
this can be produced by something like this:
javaoptions="-Xms256m" // or other option too
$javacmd $javaoptions
Now if javacmd has not been set, then $javacmd will be evaluated to the empty string, and the program to look for is the first part in $javaoptions, -Xms256m in our case.

XMLSPY Special Edition for BEA WebLogic 8.1 and WLS 8.1 sp2

Hi,
I'm a newbie for WebLogic Server. I started with WLS 8.1 sp2 since I got the book "J2EE Applications and BEA WebLogic Server 2nd Edition" which was written for WLS 8.1.
While XMLSPY Special Edition for BEA WebLogic (version 5.4 something, built in 2003) is indeed packaged with WLS 8.1 sp2 and can be installed, but it'll pop up a window (ALTOVA License Manager) everytime when I try to use it. This window pops up because the license key is not installed during the installation and therefore can't be used unless a valid key is provided.
I wonder whether I really need to get XMLSPY Special Edition for BEA WebLogic 8.1 working in order to use WLS 8.1 just for the purpose of learning. If so, can someone share with me the the key-code for XMLSPY Special Edition for BEA WebLogic 8.1 please?
BTW, I tried to find something useful to this question/problem at ALTOVA website, no luck at all.
Thank you very much.
JF

Hi Ravi,
Thanks very much for your very helpful reply.
I got into the problem with xmlspy while I was trying to figure out why the WLS admin console missing the left pane/sidebar. There was only one non-expandable dot sign at the lefttop in the admin console. When I right-click on that little dot icon, the pulldown menu shows one option is to use XMLSPY to check (something along that line). Also, I see the XMLSPY button at the left bottom of my W2003 windows (just next to IE button). So, either way when I invoked XMLSPY I would get that pop up window which tells me there choices: type in a key-code, request for a trial key, or buy a license key. But eventually, I figured out the way to fix my problem - installing a newer version of j2sdk code. However, I wasn't sure whether the xmlspy issue would a hidden problem further down the road for me to learn WLS 8.1.
You're absoluately right commenting on the the right version of WLS to use at the beginning of learning WLS.
I have been VMWare Workstation for several months. I've created a CentOS 5.4 VM with WLS 11g installed. I played with with WLS 11g for a while and even followed through an Oracle online tutorial for that version. But I'm just used to learn something with a hard copy of book and I happen to have this old book on WLS 8.1 which seems to be highly rated before. I may continue to go through this book quickly if I can. However, if I experience too many hard problems down the road, I won't waste too much more time on this path. My long term goal is of course to learn more and better about WLS 11g and other Oracle related framework and tools. There is too much to learn. But the good thing is that Oracle provides everything free to learn. Also, I'm very encouraged by the quality of the Oracle tech group where I can turn for very useful help.
Thanks again and best regards,
JF

Identity Agent for BEA Weblogic 8.1 / Errors

Hi,
We are trying to install the Identity Server agent for BEA Weblogic 8.1 (on Linux).
After filling in the �Startup Script Location� and �Weblogic Server MBeans Directory� values in the �Weblogic Server Information Panel� screen during installation, we receive the following error:
Unable to execute
at com.sun.identity.agents.tools.weblogic70.WebLogic70ConfigValidator.executeCommand(Unknown Source)
at com.sun.identity.agents.tools.weblogic70.WebLogic70ConfigValidator.getWeblogicVersion(Unknown Source)
at com.sun.identity.agents.install.panels.weblogic70.WebLogic70ConfigPanel.save(Unknown Source)
at com.sun.identity.agents.install.panels.weblogic70.WebLogic70ConfigPanel.isDisplayComplete(Unknown Source)
at com.sun.wizards.core.IteratorLayout.next(IteratorLayout.java:733)
at com.sun.wizards.core.WizardTreeManager.nextButtonPressed(WizardTreeManager.java:1198)
at com.sun.wizards.core.WizardTreeManager.dispatchNavigationEvent(WizardTreeManager.java:440)
at com.sun.wizards.core.WizardTreeManager.run(WizardTreeManager.java:402)
at java.lang.Thread.run(Thread.java:536)
We are trying to install it on Weblogic 8.1 � so any idea why the installer attempts operations on Weblogic 7.0?

the question is actually simple
but the error message is nausea
please
set JAVA_HOME=<jdk-dir-used-by-weblogic>
set PATH=$JAVA_HOME/bin:$PATH
if your shell is bsh
you need
JAVA_HOME=<jdk-dir-used-by-weblogic>
export JAVA_HOME
PATH=$JAVA_HOME/bin:$PATH
export PATH
the solution is from sun response

Identity Server Policy agent for BEA Weblogic Server 8.0

Hi all,
I donot find policy agents for BEA weblogic 8.X.
Is the 6.1SP2 version forward compatible?
Thanks

You didn't specified the OS. Please find the PA support with different platforms & softwares..
http://docs.sun.com/source/816-6884-10/chapter1.html#wp21986

NT startup parmaters for multiple weblogic servers started as a service

I have the need to start multiple weblogic servers, using NT services.
I have created a second folder with a properties file listening on another
port.
I am using the following startup parameter
-J-Dweblogic.system.name=Test
My question, this works when I type the startup parameter, is their anyway
to have this automatically entered
on server startup.
Is their a registry setting to make this permanent
Thanks

The answer is...
- Use a product to turn applications into an NT Service (e.g.
ServiceMill)
- Directly run the Weblogic Server Java class via that application
--> As many WLs on one machine as you like.
Send mail if you need specific details.
Best regards
Daniel Hoppe
-----Original Message-----
From: [email protected] (Ed) [mailto:[email protected]]
Posted At: Wednesday, August 30, 2000 2:34 AM
Posted To: install
Conversation: NT startup parmaters for multiple weblogic servers started
as a service
Subject: Re: NT startup parmaters for multiple weblogic servers started
as a service
I wish that was the case.
The problem is, while you enter the startup parameter once, it only
is good for that startup of the weblogic server,
The next time the server reboots and the services start, unless you
re-enter the startup parameter -J-Dweblogic.system.name=Foldername
The weblogic server starts using the wrong properties file.
Is their anyway using NT services to have the correct instance of WL
to start everytime.
I have checked this newsgroup and this question has been posted
before, but so far no one seems to have the answer.
I know in a production eniviorment someone must be running more that
one instance of a WL server as a service, Hopefully their is an
answer on how this is done.
Thank you
Kumar Allamraju <[email protected]> wrote:
Not that i know of.
but you are specifying this startup parameter only one time too!!!
Kumar
None of your bussines wrote:
I have the need to start multiple weblogic servers, using NT
services.
I have created a second folder with a properties file listening onanother
port.
I am using the following startup parameter
-J-Dweblogic.system.name=Test
My question, this works when I type the startup parameter, is theiranyway
to have this automatically entered
on server startup.
Is their a registry setting to make this permanent
Thanks

Error in shutdown script for bea weblogic

We have this error in the shutdown script of our bea weblogic:
./stopWebLogic.sh[33]: -Xms256m: not found.
using the Oracle OCI database driver
Shutdown initiated
The shutdown sequence has been initiated.the script is as follows:
echo "using the Oracle OCI database driver"
export ORACLE_HOME=/opt/oracle/product/8.1.7
export NLS_LANG=AMERICAN_AMERICA.UTF8
export ORACLE_CLIENT_VERSION=817
export ORACLE_API_VERSION=8
PATH=$PATH:$ORACLE_HOME/bin
SHARED_LIBRARY_PATH=$WEBLOGIC_HOME/lib/hpux11:$WEBLOGIC_HOME/lib/hpux11/oci$ORACLE_CLIENT_VERSION\_$ORACLE_API_VERSION:$ORACLE
_HOME/lib
PATH=$JDK_HOME/bin:$PATH
export PATH
# Set application specific variables
DOMAIN_NAME=eGovStarters
SERVER_NAME=MyServer
WLS_PW=weblogic
# change to domain directory
cd $WEBLOGIC_HOME/config/$DOMAIN_NAME
# Allow other users in group to see created files - i.e. logfiles
umask 027
# Set system classpath initially to contain WebLogic product JARs
CLASSPATH=$WEBLOGIC_HOME:$WEBLOGIC_HOME/lib/weblogic.jar
#!/bin/sh
# Weblogic start script for egovernment
# Based on Colin Brick's initial version
# Modified 02/04/03 - Colin Brick
#       - included settings for Oblix from using SSO Assembly Test as example
# Set General environment variables (Should normally not be changed)
#Java settings
JDK_HOME=/opt/bea/jdk131/
export JDK_HOME
JAVACMD=java
JAVA_OPTIONS=""-server -Xms1024m -Xmx1024m -Xmn320m -XX:SurvivorRatio=8 -Xverbosegc:file=/opt/bea/wlserver6.1/config/eGovStart
ers/logs/gc.log -Dweblogic.system.gc.enabled=false ""
export JAVA_OPTIONS
WEBLOGIC_PORT=51080
#Bea settings
BEA_HOME=/opt/bea
export BEA_HOME
WEBLOGIC_HOME=/opt/bea/wlserver6.1
export WEBLOGIC_HOME
BEA_SECURITY_POLICY=/opt/bea/wlserver6.1/lib/weblogic.policy
export BEA_SECURITY_POLICY
#Oracle settings
echo "using the Oracle OCI database driver"
export ORACLE_HOME=/opt/oracle/product/8.1.7
export NLS_LANG=AMERICAN_AMERICA.UTF8
export ORACLE_CLIENT_VERSION=817
export ORACLE_API_VERSION=8
PATH=$PATH:$ORACLE_HOME/bin
SHARED_LIBRARY_PATH=$WEBLOGIC_HOME/lib/hpux11:$WEBLOGIC_HOME/lib/hpux11/oci$ORACLE_CLIENT_VERSION\_$ORACLE_API_VERSION:$ORACLE
_HOME/lib
PATH=$JDK_HOME/bin:$PATH
export PATH
# Set application specific variables
DOMAIN_NAME=eGovStarters
SERVER_NAME=MyServer
WLS_PW=weblogic
# change to domain directory
cd $WEBLOGIC_HOME/config/$DOMAIN_NAME
# Allow other users in group to see created files - i.e. logfiles
umask 027
# Set system classpath initially to contain WebLogic product JARs
CLASSPATH=$WEBLOGIC_HOME:$WEBLOGIC_HOME/lib/weblogic.jar
domain_NAME=eGovStarters
SERVER_NAME=MyServer
WLS_PW=weblogic
# change to domain directory
cd $WEBLOGIC_HOME/config/$DOMAIN_NAME
# Allow other users in group to see created files - i.e. logfiles
umask 027
# Set system classpath initially to contain WebLogic product JARs
CLASSPATH=$WEBLOGIC_HOME:$WEBLOGIC_HOME/lib/weblogic.jar
#Set the shared library path
if [ -n "$SHLIB_PATH" ]; then
        SHLIB_PATH=$SHLIB_PATH:$SHARED_LIBRARY_PATH
else
        SHLIB_PATH=$SHARED_LIBRARY_PATH
fi
export SHLIB_PATH
# Start weblogic
# change to weblogic home
cd $WEBLOGIC_HOME
PATH=$WL_HOME/bin:$JAVA_HOME/jre/bin:$JAVA_HOME/bin:$PATH
$JAVACMD -classpath $CLASSPATH -Dbea.home=$BEA_HOME -Dweblogic.Domain=$DOMAIN_NAME -Dweblogic.Name=MyServer weblogic.Admin -ur
l t3://localhost:$WEBLOGIC_PORT -username system -password $WLS_PW SHUTDOWNIt has obviously something to do with the line
JAVA_OPTIONS=""-server -Xms1024m -Xmx1024m -Xmn320m -XX:SurvivorRatio=8 -Xverbosegc:file=/opt/bea/wlserver6.1/config/eGovStart
ers/logs/gc.log -Dweblogic.system.gc.enabled=false ""I googled for this Xms1024m, Xmx1024m and it turns out to be for memory management for the java virtual machine.
I don't know why it sais it can't find "-Xms256m" since it's not in the script.
Anyone with some experience in this field who can help me out?

./stopWebLogic.sh[33]: -Xms256m: not found.
this can be produced by something like this:
javaoptions="-Xms256m" // or other option too
$javacmd $javaoptions
Now if javacmd has not been set, then $javacmd will be evaluated to the empty string, and the program to look for is the first part in $javaoptions, -Xms256m in our case.

Books/Documentation for BEA Weblogic 8.1

Hello Everyone,
II am a complete novice to BEA WebLogic and was looking for a good book the bea documentation is too huge. I would be grateful if someone could let me know what would be a good book to learn. I have browsed through amazon reviews and I have two books in mind
WebLogic: The Definitive Guide
Mastering BEA WebLogic Server: Best Practices for Building and Deploying J2EE Applications.
They have bad reviews to but I guess these seemed to be the best in the worst.
Any help and advice is greatly appreciated.
Thank You.

the question is actually simple
but the error message is nausea
please
set JAVA_HOME=<jdk-dir-used-by-weblogic>
set PATH=$JAVA_HOME/bin:$PATH
if your shell is bsh
you need
JAVA_HOME=<jdk-dir-used-by-weblogic>
export JAVA_HOME
PATH=$JAVA_HOME/bin:$PATH
export PATH
the solution is from sun response

How to access Support for BEA Weblogic?

Hi,
I want to log a case to oracle with regards to BEA weblogic. How do I do it? I tried logging in to My Oracle support as well as Oracle Metalink with my user id and password and it seems like I'm not a valid user. I have a CSI which I vaguely remembered entering during the user registration but after the registration, I have no idea where to associate the CSI with the support. Please help.
Thanks,
Jhin Hin

Did you see this?
http://oukc.oracle.com/static05/opn/freetriallogin/?c=618922873&t=offering

JMSML - XML Based Mark-Up Language for BEA WebLogic JMS and JMX

          JMSML is a Mark-Up language designed and developed to make Java Messaging Service
          (JMS) and Java Management Extensions (JMX) programming easy by hiding all the
          JMS and JMX Java API complexity behind a few, simple, easy to use XML tags.
          Both the White Paper and the binary download are available in dev2dev.beasys.com
          at the link below:
          http://dev2dev.beasys.com/resourcelibrary/whitepapers.jsp?highlight=whitepapers
          Regards
          [email protected]


Hi,
I finally managed to post a message to ActiveMQ 5.4.2 from WLS 10.3. I created a foreign JMS Server in WLS. I am not sure if you still have this issue, but I was facing this problem and managed to resolve it so posting the reply!
I placed the activemq-all-5.4.2.jar file in WLS server classpath.
The settings I used for the Foreign Server are:
General tab
JNDI Initial Context Factory: org.apache.activemq.jndi.ActiveMQInitialContextFactory
JNDI Connection URL: tcp://localhost:61616
Destinations Tab
Name: TestQueue
Local JNDI Name: TestQueue
Remote JNDI Name: dynamicQueues/TestQueue (I tried with a normal queue, but it didn't work. So used dynamicQueues here. Will try with other queue also)
Connection Factories Tab
Name: AMQConnectionFactory (
Local JNDI Name: AMQConnectionFactory
Remote JNDI Name: ConnectionFactory (This is default name given by Active MQ, you can change by adding names in jndi.properties file and placing it in config folder of ActiveMQ installation. Please check here: http://activemq.apache.org/jndi-support.html)
Using this configuration I was able to post message to ActiveMQ queue from Oracle Service Bus. One more issue to be taken care is that if the message type is not "Text" then the message body was coming as blank in ActiveMQ. So set the message type as "Text" explicitly.

Any sample Questions LIST for BEA WebLogic Integration certification Exam..

Hi ALL,
I am a certified BEA's WebLogic Integration Certification aspirant.
Anyone who has taken this certification before or know what kind questions may be asked in there.. please share.
Right now I am looking into BEA e-Docs for WebLogic Integration Certification and also looking into Study Guide links given by BEA.
Please if any of you are gone through this Exam and have IDEA about the questions being asked please let me know the questions.
Thanks in ADVANCED.
Regards,
Bhavesh Thaker.

have you got the questions? I am also planning to take.
Can you please send me some
Reddy
http://www.nahusha.com
Reddy

Clustering support for BEA Weblogic Enterprise for Solaris/SUN HA

          Hi,
          Does BEA WLE 5.0.1/5.1 support SUN's SunCluster 2.X HA Framework for the Sun
          Enterprise set of Hardware?
          If not - do you plan to provide support for it in any future releases?
          Thanks and regards
          Mark O'Brien


Look for WLS 10.3 under Oracle rather than BEA group.
Konstantin

Configuring sticky cookie in CSS-11500 for BEA Weblogic servers

Similar Messages

Maybe you are looking for