Configuring storage link for wrt350n

How do you configure the storage link on a wrt350n?  I have been trying to no success.  Currently I have a flash 1gb drive attached. Once I figure out how to config it I will attach a 500gb hard drive.  If anyone knows of a link to this process or would like to tell me how please do.  Thanks

Once you connect your Storage Drive to your router, you need to login to the Router setup page and click on "Storage" tab,The Disk screen describes the disk currently attached to the Router. Once you are able to see your Storage disk, Size, Then you need to click on Create Share,Under create share you need to give a Shared Name and Select the Partition and click on Create Share. Next step you need to click on "Share" tab and click on "Modify" and you can set the Permissiong for your Users.Once you are done with all this settings.
Go to your computer on which you need to Add that Storage device... Click on Start - Run - and type \\192.168.1.1 and hit enter, and it will prompt you for the Username & Password, Type "admin" as Username and "admin" as Password and once you click Ok, it will display you your storage Partition, Right click on it and select "MAP Network Drive" and check Box "Reconnect at Logon" and click on Finish.
Open your My Computer icon and in that you will be able to see your Storage Drive. Try this i think it might solve the problem.

Similar Messages

  • How to access "storage link" on WRT350N router

    I recently purchased a WRT350N wireless router with storage link. One of the main reasons I picked this router was because the salesman told me I could hook up any external hard drive to the router and have the drive accessible on my home network.
    I have plugged the external drive into the USB on the back of the router, but I can’t find anyway to access the drive. I have looked through the user’s guide and it didn’t help. I was hoping maybe someone out there could explain this to me.
    Thanks in advance!

    hi... if you are using win XP system try following steps... click on start >> run >>  \\IP address of the router for e.g. 192.168.1.1 (default IP) it would ask for username and password put "admin" router's default password...one window pops up for flash drive...right click on it and map a network drive...let me know if you have any issues..

  • Need download link for WRT350N firmware

    I have been looking for the latest official firmware for the WRT350N, but when I go to Linksys's official page located here:
    http://support.linksys.com/en-us/support/routers/WRT350N
    There is no official download link for any model there.
    Is there anyone that has the latest firmware or could provide me a download link?
    Any reason why they are no longer listed on the site?

    Try requesting the firmware in link below. I suppose you can even try to request the firmware from Cisco. It was never clear to me whether or not WRT350N was a linksys product or a Cisco business product.. Can't hurt to try both places. I used to have the latest firmware for the WRT350N on my hard driver, but is so old, I no longer have it.
    http://support.linksys.com/en-us/gplcodecenter

  • What is the best way to configure storage device for rac?

    Hi
    On my disk array i have 7mirors and two conroler, what is the best way to configure environment?
    My application is OLTP, it runs 6-20 o clocj, so i can do backup when nobady work
    Database 10g r2, Windows 2003 enterpise
    for examlep
    First controler
    disks 1-5 DATA
    second cotnroler
    disks 6-7 FLASH
    or meyby share one disk on DATA and FLASH?
    Thanks in advice

    The best is you use ASM (maybe you do it already) and put one failure group on the first disk array and the second failure group on the second array. Then you can ASM let do the work.
    Werner

  • WRT600N Storage Link Does Not Work

    This is a great idea, but simply does not appear to work.
    Situation: WinXP Pro box, Win Vista Premium box, assorted XP home laptops, etc. Want to store common files on the router's storage link for access from anywhere on the wired or wireless network.
    Problem: Folders created on the linked USB hard drive were originally fully accessible by any computer on the network, but became somehow unreadable and unwriteable -- EVEN TO THE WRT WEB INTERFACE
    Can't read files in these folders, can't write either, of course. Can't even use the WRT600's web interface to "delete" the folder. (returns a page not found error in IE7). "Edit" doesn't work either -- page loads for edits, but attempting to save changes gives a page not found or "cannot display the web page" error. This doesn't work in Firefox, either.
    As I try to create a folder now via the web interface with firefox, I see that doesn't work either. It takes the name, refreshes the screen as if something's being created, but on return, nothing is there. Same now with IE7. Sigh, this just gets worse as I double-check and try to get this post properly prepared.
    Just reset this thing, and it let me (via web interface) create and delete one folder, but then stopped working 30 seconds later.
    I tested a USB stick and got similar terrible results.
    I'm running the latest firmware *.35
    This thing simply doesn't work. It's not even a good beta. I'll have to advise anyone considering a purchase of this router to forget it. What a frustrating waste of time and money.

    Yes, I'm reluctant to also, like so many others, report that the WRT600N fails to perform without error in the handling of an attached usb harddrive.
    It does not maintain a stable user priviledge base, even loosing administrator access privledges to the drive.
    I have reformatted the drive using the WRT600N web interface. This made sure the harddrive was formated using the native drivers in the device (FAT32). I suspect that this device uses an internal linux variant and it's my understanding that NTFS formats (of which I think there are at least 4 versions) are not well supported under linux. This did not improve the reliability of the drive. I wonder if the priveledge table is not stored on the drive, but in some internal memory, and it's not stable.
    Any suggestions?
    Message Edited by sippnonacorona on 03-16-2008 01:12 PM
    (Edited post for guideline compliance. Thanks!)
    Message Edited by JOHNDOE_06 on 03-16-2008 01:17 PM

  • WRT350N - Transfer speed via Storage link

    I have always been curious what the transfer speed others get while using
    a USB 2.0 hard drives on their WRT350N.
    Obviously there is going to be a drop in transfer speed using storage link but 2-3 Megabyte seems slower then I would expect.   I don't thnk I have ever seen much about 3MB. 
    I see the same performance wirelessly (connected at 270mb) and hardwired into the gig ethernet port.
    Just wanted to get some other peoples results.
    Message Edited by GAH1068 on 01-17-2008 02:04 PM

    It was on both systems. However, I did get it working. Not the way I liked, but it works. What I expected to see was the device hung off the network. That is like another computer. This *is* happening, but where I was confused was the access to it. On other shared resources I can open it at will with no special access rights needed. I'm talking about printers and files on other computers on the network. It turned out to access the Storage Link I had to actually provide a USER ID and PASSWORD before I could use it. Why I couldn't get access before was I had HTTP:\\192.168.1.1 already open in my browser so any other attempts via the web browser used the existing connection. Not until I saw a forum message that said use START=>RUN and enter the IP address or UNC name was I able to connect to it. Since I now know this, a simple bat file with some NET USE's should fix the problem of getting access. Compounding my problem is how I've chosen to manage the network and shares. I use Network Magic, and it can NOT see the Storage Link at all. Anyway, I now know how to access the Storage Link. I was using a Flash drive for testing. I'll next put a USB External drive on and try that out. My ultimate try will be a USB hub and 4 external drives and hopefully I'll have access to all 4 drives to all computers. Irv S.
    Thanks,
    Irv S.

  • WRT350n storage link itunes problem

    There is not enough room on "\\Linksyswrt350n\all_partitions" to copy all of the requested files. iTunes will copy as many files as possible. I know for a fact that I have plenty of room on the drive. It seems itunes is having trouble getting access to the drive... not sure how to fix this

    I just bought the wrt350n.  have not hooked it up yet.  I plan on putting a mybook 750gb drive on the storage link and putting my itunes library on it.  how difficult is this?

  • What Everyone Should KNow and Linksys Should Advertize About WRT350N Storage Link Limitations

    I have spent hours with Linksys online chat trying to get my wrt350N storage link to work as advertised. Basically, I want to hook up a 400gb mybook hard drive and use the networked drive to backup my netwroked computers over the wireless network. While I can write individual files to the networked hard drive, and can copy and paste large folders using windows explorer, I can not use backup programs. The netowrked drive reports incorrect information as to its capicity to "my computer" and always shows up as "read only" while some programs don't seem to mind this, every backup program I have used has problems with this clitch.
    After several sessions with linksys and having retuend the router to linksys for a new one, this is what technical support said this morning:
    "You: ok so if I have you right, the router's storage link is not guaranteed to work at all with >300gb storage devices, does not work at all with 3rd party backup programs, and does not provide a backup program of its own, is that the bottom line?
    Tech Support: Exactly. That's its product limitation."
    Just so everyone is clear, Linksys does not gauruntee that storage link works at all with drives greater than 300gb, it is not compatable with 3rd part backup progrmas and does not provide a backup program of its own.
    This is independant of ntfs vs fat32 and yes I do have the new firmware 1.03.2 and have it correctly installed (linksys checked all of my settings online).
    If I am missing something and there are others out there who are gettnig storage link to work with backup software, I would love to know what I am doing wrong, because 7 different linksys tecnical support people have been unable to tell me.
    Since Linksys is unwilling to place these product limitations on their packaging, I thought that potential users deserve to know the limitations of this product.
    (Mod note: Post has been edited for guidelines compliance.)Message Edited by primus on 03-04-2007 08:43 PM

    sounds like you are in the same boat I was. I bought the WRT350N to use with my macbook pro and attached a 500gig usb drive to it for remote storage. I got nothing but permission problems copying files. The save usb drive worked fine in a dlink storage box. I took mine back and ordered the
    Airport Extreme-N
    - James

  • I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?

    I have a new Mac Pro.  I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro.  How do I set up the old computer?  Both computers have OS X10.9.3.  Currently they are connected by a Firewire 800 cable.

    You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
    Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
    Matt

  • WRT350N Storage Link usage?

    Just bought the router and set it up. Works fine for what I had replaced before (G speed). Now I tried to enable the Storage Link. Put a 2GB Flash drive in the unit. It is on, and on the webpage I can see it. However, I can't see it via the LAN? I have Network Magic to 'manage' my network, and it can't see it? However, a NEW VIEW from my computer reports this... ____________ c:\>net view Server Name Remark ---------------------------------------- \\IRVS Gen5 \\LARAINE-HP \\LINKSYSWRT350N LinksysWRT350N The command completed successfully. ------------ The last UNC is the flash drive. Trying to view it reports this : c:\>net view \\LINKSYSWRT350N System error 5 has occurred. Access is denied. I've tried ALL sorts of permissions and group creations. Still noting will allow me to look at it. Network Magic doesn't even see the device as a SHARE? Suggestions?
    Thanks,
    Irv S.

    Yes, figured that out. The reason it didn't work before was that I had the Router settings open in the Web Browser and any other attempts to reach 192.168.1.1 didn't ask for a UID and P/W, just opened the main router page. Working now though. Thanks, Irv S.
    Thanks,
    Irv S.

  • LSO 600 Configuration - Central Storage Location for XSLT Files

    Hi,
    We are implementing LSO 600 with enhancement pack 2 and I am haiving trouble figuring out what do do with the configuration steps
    Enter Address of Central Storage Location for XSLT Files
    and
    Enter Address of Central Storage Location for Templates.
    The config notes indicate that these can be a directory or network path with the format
    servername\filename\.
    As I understand it this is is the address of the file on the Portal Server where  XSLT files and templates be stored. The problem that I am hearing from the basis team is (I am qouting an email from them) "who accesses the share? Is it the server, the client PC or both? We’re running in a linux environment so I don’t have any shares the PC can access."
    Does anybody have any input?
    Thanks,
    Andy

    Hi Andy!
    I am happy that the issue is already clear!
    Beeing busy makes life more interesting )
    May I ask for your private mail, because I had some questions regarding your LSO implementation.
    Mine is:
    [email protected]
    Thx in advance and have a nice day!
    best regards,
    Zsolt
    P.S.: since I am a Moderator for SDN it is my job to keep the rules on the Forum therefore I would like to ask you to close this thread because the question - as you stated - is answered.
    Thank you!

  • L3 Link for Storage Replication

    Hi,
    Has anyone experienced on provisioning L3 MPLS link for Storage Replication.  I have two DC at different location and EMC Storage.
    we will have 2 MPLS L3 Link between two DCs to replicate the data.  We have 4 RPA at each side and 2 MPLS Link.  but dont have idea how to connect all these things.  I have Nexus 7k in new DC and 6509 in old DC.
    If anyone has any idea how to provisioned this link, it would great help to me.

    Hi Micky,
    Such table doesn´t exist in standard SAP! You should try to accomplish this in a view!

  • Just upgrade to 33.1.1, terrible! new tab position not configurable, no response for clicking a link, how can I have the old version? Thanks!

    Just upgrade to 33.1.1, terrible! new tab position not configurable, no response for clicking a link, not going to the website by click "enter", "space" keyboard can not be the page down anymore, always die....
    how can I have the old version?
    Thanks!

    Just to clarify, let's say you have tab 1 Google results and tab 2 something else. When you Ctrl+click a link in tab 1, it opens between tab 1 and tab 2 instead of at the end? Here's how you switch that:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
    (3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false.
    You can switch back to an earlier tab and test. Success?

  • How to configure 2 PS3 for NAT 2 connected to WRT350N

    Okay so 1 of the PS3 is wireless and another is wired and both are connected to my WRT350N. Is there anyway to configure WRT350N so that the 2 PS3 that I have will have NAT 2? Right now 1 of them is NAT2 and the other is NAT3. I tried to configure them both for NAT2 but it just doesn't work. Am I missing something? PLease help!

    NAT 3 = Restricted voice communication and other features
    NAT 2 = Correct ports fowarded for your PS3 or it's DMZ'd
    NAT 1 = No router, it goes straight through the modem (normally)
    So like I was saying, I want the 2 PS3 that I have to be on NAT 2 and with the WRT350N, I can't seem to configure them to NAT 2 at the same time.

  • Please somebody out there must know , bought storage on icloud thinking was same cloud on xbox , receipt says i can cancel in 15 days money back but not how to do it , no link for that , just going around in circles , they ask for serial no,dont have?

    Hello all those smarter than me ! help , please , purchased icloud storage thinking could use on xbox cloud storage , receipt says can cancel and refund in 15 days
    but no link for that option , have been going around in support circles that just dont help , they ask for serial numbers , i dont own an apple device , sorry to shock, will change from android next time ok,its only $21 so its more the satisfaction of getting through the maze , anybody ???

    You can cancel an iCloud storage upgrade but only within 15 days of buying:
    Apple seem to have made this as difficult as possible. You may be able to do this using http://expresslane.apple.com - Click on 'More products and services', then 'iCloud', 'Account and setup' then 'This topic is not listed'. Explain the situation in the box provided and wait for a response - include a phone number. However you may find you cannot proceed without entering a hardware serial number which is still eligible for AppleCare.
    In that event you will need to phone them directly, using the Apple Online Store number given at the bottom of this page. The first person you speak to may tell you to do it from the iCloud website but this is not possible. Politely insist on escalating the issue to a more senior person and eventually you should be able to get through to someone who can deal with this (you may have to wait for them to call you back) - you will be asked security questions and for part of your credit card number to identify yourself.
    If it is more than 15 days since you purchased the storage you cannot cancel it for a refund; you can downgrade your plan as from your next renewal date. Please see
    http://help.apple.com/icloud/#mm12eecb08e7

Maybe you are looking for