Configuring Sun Glassfish server for JCAPS6

Following the directions in Louis Polycarpou's blog at http://blogs.sun.com/polyblog/entry/creating_a_new_caps_6 I was able to successfully configure a fresh install of the Sun Glassfish server for hosting JCAPS6 JBI applications. However, yesterday I sat with a member of our server support team to perform the same process on a test install that they have. The difference between the two is that the installation that I worked with earlier was a standalone server instance. Yesterday we were attempting to configure a cluster environment. We ran into errors with the eventmanager.war deploy. We are confused about what gets deployed to the DAS and what to the cluster (the support team would prefer that nothing be deployed to the DAS).
I suspect that our error is related to the install.properties file, especially the following 2 entries:
# The name of the server
caps.target=server
# Optional: name of a cluster target
caps.cluster.target=
For the standalone server this was obvious; leave as is. But for the clustered version, what should be the value of caps.target? Leaving it as 'server' means deploying to the DAS (and resulted in an error). Should it be set to the cluster name, same as caps.cluster.target?
Can anyone shed any light on this?
Thanks,
Dave

I saw you post when was trying to figure out why it doesn't work.
I'm using this distribution:
602225157 java_es-5u1-ga-linux-x86.zip
[root@ Linux_x86]# cat release_info
Product=Java Enterprise System 5U1
Date=Mon Aug 20 18:06:10 PDT 2007
Build=08b
PatchLevel=000It was bundled with other commsuite packages like directory server. They mentioned that only 32 bit version is supported for Linux, so I assumed 32 version of web-server was ok. Seems like this was a wrong assumption.
Did you install your web server from different distribution file? Can you check which one you used?
Roman
Edited by: Rokka on Aug 3, 2009 12:49 PM

Similar Messages

Configure sun glassfish server to enterprisedb

I need to create connection pool for a enprisedb data base. But in the glassfish application server doesn't provide enterprisedb as database vendor.
Can any one help me ?
If possible give me a tutorial or explanation on how to do that.
Thank you.......................

Hello
what kind of data base are you using,
you must have the driver of the data base installed and configured in your system

Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOA

Can anyone help figure out why the Catalyst 6509 is not able to assign an IPv6 address? Thank you.
Cisco Catalyst 6500 version 12.2(33)SXI13 configured as DHCP server for a VLAN responds to Windows 7 client with status code NOADDRS-AVAIL(2). My configuration on the 6500 for the DHCPv6 server is:
ipv6 dhcp database disk0://DHCPV6-DB
ipv6 dhcp pool VLAN206IPV6
prefix-delegation pool VLAN206IPV6-POOL
dns-server 2620:B700:0:1001::53
domain-name global.bio.com
ipv6 local pool VLAN206IPV6-POOL 2620:B700:0:12C7::/65 65
interface Vlan206
description *** IPv6 Subnet ***
ip address 10.2.104.2 255.255.255.0
ipv6 address 2620:B700:0:12C7::2/64
ipv6 nd prefix 2620:B700:0:12C7::/64 14400 14400 no-autoconfig
ipv6 nd managed-config-flag
ipv6 dhcp server VLAN206IPV6
standby version 2
standby 0 ip 10.2.104.1
standby 0 preempt
standby 6 ipv6 2620:B700:0:12C7::1/64
standby 6 preempt
I'm getting a result from my debug as follows:
Apr 10 16:28:02.873 PDT: %LINK-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.873 PDT: %LINK-SP-3-UPDOWN: Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:02.877 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/2, changed state to up
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Received SOLICIT from FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: dst FF02::1:2
Apr 10 16:28:03.861 PDT: type SOLICIT(1), xid 8277025
Apr 10 16:28:03.861 PDT: option ELAPSED-TIME(8), len 2
Apr 10 16:28:03.861 PDT: elapsed-time 101
Apr 10 16:28:03.861 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.861 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.861 PDT: option IA-NA(3), len 12
Apr 10 16:28:03.861 PDT: IAID 0x0FF01FAF, T1 0, T2 0
Apr 10 16:28:03.861 PDT: option UNKNOWN(39), len 32
Apr 10 16:28:03.861 PDT: option VENDOR-CLASS(16), len 14
Apr 10 16:28:03.861 PDT: option ORO(6), len 8
Apr 10 16:28:03.861 PDT: DOMAIN-LIST,DNS-SERVERS,VENDOR-OPTS,UNKNOWN
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Option IA-NA(3) is not supported yet
Apr 10 16:28:03.861 PDT: IPv6 DHCP: Sending ADVERTISE to FE80::5D5E:7EBD:CDBF:2519 on Vlan206
Apr 10 16:28:03.861 PDT: IPv6 DHCP: detailed packet contents
Apr 10 16:28:03.861 PDT: src FE80::21D:E6FF:FEE4:4400
Apr 10 16:28:03.861 PDT: dst FE80::5D5E:7EBD:CDBF:2519 (Vlan206)
Apr 10 16:28:03.861 PDT: type ADVERTISE(2), xid 8277025
Apr 10 16:28:03.861 PDT: option SERVERID(2), len 10
Apr 10 16:28:03.865 PDT: 00030001001DE6E44400
Apr 10 16:28:03.865 PDT: option CLIENTID(1), len 14
Apr 10 16:28:03.865 PDT: 00010001195FD895F01FAF10689E
Apr 10 16:28:03.865 PDT: option STATUS-CODE(13), len 15
Apr 10 16:28:03.865 PDT: status code NOADDRS-AVAIL(2)
Apr 10 16:28:03.865 PDT: status message: NOADDRS-AVAIL

Hello,
maybe hitting the following bug.
Pv6 Address Assignment Support for IPv6 DHCP Server
CSCse81385
Hope this helps

Error CIM_ERR_FAILED - Configure the integration server for sld

Hi,
I´m running the Configuration Wizard SLD in "PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage". In step 33/142 Configure the integration server for sld, I got following error:
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
Someone help me?
Regards,

The version is 7.0. I skip this step and finished with sucess. No run the step:
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Cancelled
PI_01_This template checks if the necessary services are started Cancelled
PI_05_This wizard will configure the integration server for sld Incompletely executed
These steps are with the same error.
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement

How to configure sun application server 8.2 for Oracle RAC 10g

Hello,
We have numerous boxes running the sun platform application server 8.2 and 2 boxes running enterprise version 8.2 all connecting to a 4 node Oracle RAC 10 G release 2 database. We have the system up and working. The application servers are connecting just fine to the database and the apps don't have any problems querying, inserting, etc. However, when we try to do failover testing of situations when a node or nodes of the Oracle RAC database goes down the application server does not gain new valid connections. Our configuration is this, OracleDataSource for the data source, table validation turned on with a valid table, ONS configuration set in properties, connectionCache enabled, and fastconnectionfailover enabled as well in the properties. We have that long oracle rac url with load balancing turned on set fot the database URL. We have the checkbox checked to fail all connections on any failure. ONS is configured properly within the database because we have a java application that runs outside of the application server that uses all the same settings described above (only set manually in our code for the OracleDataSource). This application works seemlessly when DB nodes are shutdown. We can shutdown all but one node and it's still humming along without skipping a beat. Start up one of the others, kill the last node, it still hums along nicely without skipping a beat. We'd really like to get the applications running in the application server to work the same way. Any help would be greatly appreciated. We've tried all the combinations that we can think of with configuration settings in the application server and it never works. Am tempted to rip out the database connection pool from inside the application server and configure it manually in the code but we are using entity beans and this is the much easier approach, if it will work. It's down to the point of does sun application server actually work with oracle RAC for connection failovers.

Hi,
We are also facing similar execption. Here is the error, we are getting, when a node is failed on RAC.
[#|2007-11-11T12:43:53.685+0000|WARNING|sun-appserver-ee8.1_02|javax.enterprise.system.core.transaction|_ThreadID=38;|JTS5041: The resource manager is doing work outside a global transaction
oracle.jdbc.xa.OracleXAException
at oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1270)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:318)
at com.sun.gjc.spi.XAResourceImpl.start(XAResourceImpl.java:184)
at com.sun.jts.jta.TransactionState.startAssociation(TransactionState.java:258)
at com.sun.jts.jta.TransactionImpl.enlistResource(TransactionImpl.java:181)
at com.sun.enterprise.distributedtx.J2EETransaction.enlistResource(J2EETransaction.java:397)
at com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.enlistResource(J2EETransactionManagerImpl.java:312)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.enlistResource(J2EETransactionManagerOpt.java:114)
at com.sun.enterprise.resource.ResourceManagerImpl.registerResource(ResourceManagerImpl.java:113)
at com.sun.enterprise.resource.ResourceManagerImpl.enlistResource(ResourceManagerImpl.java:71)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:176)
at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:268)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:193)
at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:70)
at com.syntegra.nasp.etp.dax.DBManager.getConnection(DBManager.java:192)
at com.syntegra.nasp.etp.dax.DBManager.createDBCommand(DBManager.java:241)
at com.syntegra.nasp.etp.dax.DBManager.createDBCommand(DBManager.java:251)
at com.syntegra.nasp.etp.dax.sp.SPS_PRESCRIPTION_GUID_PROC.getCommand(SPS_PRESCRIPTION_GUID_PROC.java:31)
at com.syntegra.nasp.etp.dax.sp.SPS_PRESCRIPTION_GUID_PROC.execute(SPS_PRESCRIPTION_GUID_PROC.java:23)
at com.syntegra.nasp.etp.dax.PrescriptionBaseDataMapper.loadPresciptionByGUID(PrescriptionBaseDataMapper.java:203)
at com.syntegra.nasp.etp.model.PrescriptionBase.findByPrescriptionGUID(PrescriptionBase.java:176)
at com.syntegra.nasp.etp.messages.PatientPrescriptionReleaseRequest.execute(PatientPrescriptionReleaseRequest.java:120)
at com.syntegra.nasp.etp.service.ETPSLBean.processMessage(ETPSLBean.java:159)
at sun.reflect.GeneratedMethodAccessor97.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:147)
at com.sun.ejb.containers.EJBLocalObjectInvocationHandler.invoke(EJBLocalObjectInvocationHandler.java:128)
at $Proxy6.processMessage(Unknown Source)
at com.syntegra.nasp.etp.listener.RequestListener.onRequest(RequestListener.java:204)
at com.syntegra.spine.csf.consumer.mdb.CSFListenerRegisteringConsumer.onRequest(CSFListenerRegisteringConsumer.java:54)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.invokeListener(CSFConsumerBase.java:267)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.processMessage(CSFConsumerBase.java:180)
at com.syntegra.spine.csf.consumer.mdb.CSFConsumerBase.onMessage(CSFConsumerBase.java:102)
at sun.reflect.GeneratedMethodAccessor96.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.enterprise.security.SecurityUtil$2.run(SecurityUtil.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.enterprise.security.application.EJBSecurityManager.doAsPrivileged(EJBSecurityManager.java:955)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:158)
at com.sun.ejb.containers.MessageBeanContainer.deliverMessage(MessageBeanContainer.java:956)
at com.sun.ejb.containers.MessageBeanListenerImpl.deliverMessage(MessageBeanListenerImpl.java:42)
at com.sun.enterprise.connectors.inflow.MessageEndpointInvocationHandler.invoke(MessageEndpointInvocationHandler.java:130)
at $Proxy9.onMessage(Unknown Source)
at com.sun.genericra.inbound.DeliveryHelper.deliverMessage(DeliveryHelper.java:183)
at com.sun.genericra.inbound.DeliveryHelper.deliver(DeliveryHelper.
Regards
Selvan.

Configuring a Directory Server for Digital IDs and Certificates

My company is moving toward using electronic signatures for internal documents. All of the users are on XP machines and have Acrobat Professional 8.0 installed. So far, I've been manually adding trusted IDs for each person who will be receiving signed documents that need to be validated. I'd like to make this a little easier by storing everyone's certificates on a server (Windows 2003) so that people can just go out there and add them all as one .fdf file. What I'm wondering is, what is the difference between doing it this way versus going through Acrobat and configuring a directory server? Will it work either way?
Thanks!
Anita

Hi,
Sorry for the late reply, regarding the error message: The DHCP services could not Contact Active Directory,
please check the below KB article to see if it could help here:
You are unable to authorize DHCP Server in Active Directory
http://support.microsoft.com/kb/303317/en-us
Reference for error ID 1059, and
error ID 10020.
For The specified server are already present in the directory services,
please take a look into the below Blog:
Active Directory DHCP authorisation issues
The method mentioned in the blog above is trying to move the old information that stored in AD, and then take an action of re-authorisation of the DHCP server.
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to configure a proxy server for Windows Azure Tools in Visual Studio 2013

Hi Visual Studio/Azure Tools team
I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. Unfortunately, I am not able to use
the Windows Azure tools since the required HTTPS connection to windows azure is not going through the default configured proxy. Instead, Visual Studio tries directly to connect to port 443 which is blocked by our corporate firewall (and yes: there is no way
around using our proxy server). Other visual studio features like NuGet, updates, etc. work fine and use the configured proxy server.
So my question: How can I configure visual studio respective its Azure tools to use a proxy server instead of a direct connection? I already tried configuring the proxy server within the file devenv.exe.config but this doesn't show any effect for Windows Azure
tools.
Regards
tschaena

As we have very similar problems I consider the found solution a work arround an existing problem which will not work if corporate FW policy does not allow such changes.
In my mind, any tools in charge of dealing with some sort of FW protocols should deliver the following information, should make it absolute clear how to setup that the request packages are setup rigth at the first time.
a) proxy server
b) proxy port
c) proxy user
d) proxy users-password
e) proxy.auth.Preference="BASIC"
And for moste tools (including Visual Studio and AZUR Tools) it is absolut unclear
a) how to setup that on a per tools basis
b) OR who inherits this information from whom i.e. use the same as IE does, what if we use FireFox or any other browsers?
I understand that developers requested to cure such problem areas will often have difficulty to gain all required elemenst used to realy test the solution.
But I can tell you: I loos more time figthing down the FW setups for my clients. WHat I do at home in a sniff, takes ages to be realised by all the various clients on the market where each has to deliver the same sort of information but actually does not,
or has it just somewhere, but not in the vicinity of the demanding user.
Good examples i.e. NetBeans IDE where the Option Menu shows very clearly what information is required to pass through a FW/Proxy; but even there, the hint to start with a BASIC authentication schema is not part of this OPTION menu and must be added a JAVA
environment value. But at least, it works.
Sepp

Error while configuring the application server for ESB on Jdeveloper

While i try to configure a application server connection on Jdeveloper for a remote installation of ESB (advanced mode with all the three components together and not in a cluster mode) i get the following error :
Error getting OC4J Process for: opmn-home+oc4j-10.10.36.21-6003-default:
Error connecting to OPMN (is it running?): Connection refused: connect
All the OC4J processes are running on the server as i get the following output for the ./opmnctl status command :
[oraclesoa@esboid2 bin]$ ./opmnctl status
Processes in Instance: home.localhost.localdomain
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:oc4j_soa | 10000 | Alive
OC4JGroup:default_group | OC4J:home | 9999 | Alive
ASG | ASG | N/A | Down
HTTP_Server | HTTP_Server | 9998 | Alive
The installation is on a Linux box.
I give the following details in the connection properties box in Jdeveloper :
host : 10.10.36.21
opmn port : 6003
oc4j instance : home
Also the opmn port is correct :
[oraclesoa@esboid2 bin]$ ./opmnctl status -port
esboid2:6003
Any ideas on this?
Message was edited by:
Nilay

i tried with taht.....same error.......is this an issue with port 6003 on the server........it is a linux server and I cannot telnet to it......i can use SSH though.......how to know whether the opmn port(6003) is open or not?.....

Proper Configuration of DNS server for our new branch office

Hi All,
Our new office will setup a new branch office with a routed network link to our HO. In HO, we have 2 domain controllers configured as AD and DNS just for fail over scenarios.
How will we configure the DNS server of our 3rd domain controller which we will placed in the new branch office. What would be the proper settings of DNS server integrated to AD to work well especially to have a successful replication and communication to
the 2 DC's located in HO?

Hi,
If you have multiple DC's in that site i would recommend using any of the partner DC's IP addresses as preferred one and secondary DNS IP to pointing to itself. Dont use loopback addresses configure it with actual IP addresses.
If you have only one server in branch office point itself as the primary DNS and HO DC as secondary and tertiary.
Make sure that all clients in your branch site are pointing to the branch DC as primary DNS server.
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Which clients are using my Sun One server for authentication?

We use Sun One ver. 5.2 .
Our LDAP clients use it for authentication.
How can I list which clients recently used the Sun One server to authenticate?
The reason I need that is because I want to upgrade the Sun One server and I want to notify the clients that I'm about to do it.
Thanks.

https://www.redhat.com/archives/fedora-directory-users/2005-September/msg00010.html
Useful script to extract LDAP based user posixGroup memberships information
===
Assuming you are using posixGroup objectclass and memberUid attribute to
store your membership information, you may find my shell script useful
and handy.
It works on Solaris LDAP Client with "ldapaddent" and "ldaplist"
commands, and works against FDS, SUN DS or OpenLDAP.
===
Gary

Configurations Flash Access Server for Protected Streaming

Do anybody have informations, how configurate files flashaccess-global.xml and flashaccess-tenant.xml?
I now that Flash Access Server for Protected Streaming ignored content policy, and policy have to set in that configurations files.
Where can I read about that? Very small informations are about that
Thanks

Hello,
Please check chapter "Deploying the Flash Access Server for Protected Streaming" in http://help.adobe.com/en_US/flashaccess/2.0/protecting_content.pdf.
Best regards,
Wang Chao

Configuring OS X Server for Jetphoto - need steps.

Folks I am trying to get jetphoto up and running on our MacMini OS X server, but don't quite understand how to configure OS X Server 10.8.5 to get the jetphoto package to work.
It's easy on a client version of OS X, but I can't figure this one out.
I could use some advice/ steps. I placed the web package in the web server/ documents directory and tried configuring a website for it in Server.app, but no luck.

I am using Mavericks Server now.
Here are the following issues:
The domain name (properly formed) is giving me a red status light.
I chose a different directory for file storage other than the one you suggested. Server.app allows this it seems since theres a "Store Site Files In" drop down menu.
IP address is set to any on port 80, because if I use the ip address of the computer (which defaults to the OS Server page-which we use) we would lose the default page.
I don't know how to actually invoke the jpserver from Safari. I don't know what I should tip in the URL to get any response so that I can trouble shoot and/or see if it's working.
I am starting to wonder how Serve.app is validating the domain name which would then determine whether or not it gets a red or green light. Does the domain name need to be created outside of our office first - meaning with our webhost for instance? Right now I am just trying to get jet photo up and running for internal local network use so that the address would be something like office server.local/photos
I'd like to do this without installing MAMP on our server; assuming OS X server has what's necessary to do what I am trying to do.
Eventually I would like to have this working from the internet and I realize I would need to have a public domain resolve to our server for this site.

Configuring Mountain Lion Server for iOS MDM

Hi all,
I am an admitted newbie to the Mac world. That said, I am in the process of setting up an OsX 10.8 server to handle the MDM for our iPad deployment. This is in a school district that runs all Windows in Active Directory.
I attempted to do the setup with no luck. So, I tried to reset the server back to the defaults and found that the settings I had made previously were still there.
What I need to know is how should I go about getting back to essentially scratch with this setup? Once I have that, what is the correct setup process to get me to where I can enroll the iPads to do the wireless MDM? We do not need to have access to the server from any other devices. No other services are needed like email, file shares etc. We have several sites on many different subnets but all on the same network.
A few specifics I do need to know is which network configuration would be preferred for our type of network? I'm thinking Private since everything will be handled internally. Also, regarding the certificates, is an SSL certificate required? And last, I read that there are some TCP ports that need to be opened. Is this required if we are running strictly internal with this?
Sorry for rambling on and my inexperience. I appreciate any help anyone can give.
Thanks!

You can use .private but if there is EVER the possibility that this would be used outside your LAN, then I would use a FQDN.
You do not need a commercial certificate. A self-signed will work fine.
The default self-signed has a 1 year expire. If you don't want to deal with updating the cert in a year, I would create a new 5 year cert.
This option is harder to find now with mountain lion.
From the Certificates section in Server, first click the gear and choose 'show all certficates', then hit the + button and choose 'Create a trusted certificate'. You will see a button to override defaults. This allows you to have a different expire date.
You can reset the profile manager data (stored in postgres) with:
sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB.sh

Configure Sun Directory Server 6.3 with SSL in OIM 9.1.0.2

Hi,
I am using OIM 9.1.0.2. i want to Provision User to Directory Server 6.3 with SSL confiuration
Can anyone tell me the steps for configuring the Certificate import, etc..
followed SJSDS_904120 doc but there is no info for DSEE 6.3 in it.
Regards,
Praveen
Edited by: Praveen on Feb 16, 2012 9:08 PM

Well not sure about the exact clicks you need to do but the basic steps are that you export certificates from DS and then import it into the jdk which has OIM running. Look at the doc for SJDS6.3 about setting and exporting certs.
-Bikash

Package Configuration via SQL Server For a Reporting Queue

The scenario is a reporting queue for a web application. Currently when a user queues a report it stores the parameters in a table by queue ID. When that report is set to run the database creates a dtexec command with all the parameters. We use this
method for transferring the values the user selected to the SSIS packages.
I have used SQL Server package configurations before but they are usually a single table with a distinct ConfigurationFilter column. Is it possible to take the standard table layout for the SQL Server package configuration and add another column, say
QueueID. We send the QueueID to each package at run time and use this value to filter the table to the configuration specific to that report?

Here is a better break down of the current process:
1. A user goes to the web application and selects a report/parameters.
2. This will add data to [QUEUE] and [QUEUE_PARAMETERS] tables associated by the QUEUE_ID
3. The server has a windows service which looks for reports in the [QUEUE] table in pending status and gets the next one available and calls a stored procedure with that QUEUE_ID.
4. The stored procedure puts together a dtexec command through xp_cmdshell which contains all the user parameters from the [QUEUE_PARAMETERS] table.
The purposed process is to replace the self made [QUEUE_PARAMETERS] table with the package configuration table. This means we would only have to send the QUEUE_ID via the dtexec command and not all the other parameters. The problem is that if
I add QUEUE_ID to the package configuration table I am not sure how I would reference a specific QUEUE_ID from the SSIS package configuration dynamically. There does not appear to be an expression that can be applied to the package configuration in SSIS
which means the relationship must make the ConfigurationFilter field unique, even though it is not a primary key.

Configuring Sun Glassfish server for JCAPS6

Similar Messages

Maybe you are looking for