Configuring Sun Java System webserver 6.1 SP2 to JBOSS 4.0

how to redirect a request from Sun Java System webserver 6.1 SP2 to JBOSS 4.0. What are the config chages to magnus.conf and obj.conf.
do we need any plugins for this

I'm unable to configure the Java webserver with JBOSS.
I'm getting following info while running the server.
Sun ONE Web Server 6.1SP3 B08/17/2004 18:33
info: CORE3016: daemon is running as super-user
info: PASS1000: Sun ONE Web Server 6.1SP3 Reverse Proxy Plugin B09/09/2004 11:59
config: PASS1007: init-passthrough directive ignored
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.2_04] from [Sun Microsystems Inc.]
info: WEB0100: Loading web module in virtual server [vs-admin] at [admin-app]
info: HTTP3072: [LS ls1] http://yamuna:8888 ready to accept requests
startup: server started successfully
My congifuration settings are:
Magnus.conf: placed the libpassthrough.so in specified location.
Init fn="load-modules" shlib="/opt/SUNWwbsvr/plugins/passthrough/libpassthrough.so" funcs="init-passthrough,auth-passthrough,check-passthrough,service-passthrough" NativeThread="no"
Init fn="init-passthrough"
Obj.conf:
NameTrans fn="assign-name" from="/ApplnName(|/*)" name="ApplnName"
<Object name="ApplnName">
ObjectType fn="check-passthrough" type="magnus-internal/passthrough"
Service type="magnus-internal/passthrough" fn="service-passthrough" servers="http://myIP:8080/ApplnName/"
</Object>
When I start server, the server is running fine but it is ignoring the init-Passthrough directive.
I think i have to do some setting in magnus.conf. please help me out

Similar Messages

Php plugin 1.0 for sun java system webserver

Hi,
I installed php plugin 1.0 for sun java system webserver 7. But it supports default 2 DB mysql and postgresql. Can i configure oracle 10g DB support?
Appreciate if you could throw some light on this.
Thanks,
Krish

Using PHP with NSAPI plugin will definitely get you the best performance. However, if you are using PHP with NSAPI plugin enabled then you might have to be careful when you are installing any of the PHP extensions from PECL to make sure that they are thread safe.
Note: There can be a potential issue only when using any of PECL (http://pecl.php.net) extension and not with any PEAR (http://pear.php.net) extensions.
For example, if you PHP built for NSAPI and then using on top of WordPress or Drupal or on top of frameworks like ZF etc should not be a problem
To compile PHP 5.3 with NSAPI, you would do some thing like
./configure --with-nsapi=<web-server7-install-directory>
To compile PHP 5.3 with FastCGI, you would do some thing like
./configure enable-cgi enable-force-cgi-redirect

How to configure Sun Java System Application Server Enterprise Edition 8.1

hi all,
How to configure Sun Java System Application Server Enterprise Edition 8.1 to my IDE..( jstudio)
I have installed jes for my windows system.. so that i have removed platform version of Application Server..
I try to add the Enterprise application Server (Sun Java System Application Server Enterprise Edition 8.1) to JStudio IDE..
but i couldn't;

Configuring your IDE to integrate with Sun App Server is something you probably will have to ask in some sort of JStudio forum. Other than for Netbeans, Eclipse, or possibly IntelliJ IDEA, you might not have much luck answering an IDE question here. I could be wrong though. Maybe somebody will have an answer for you and set me straight.

How can I use Servlets on Sun Java System WebServer 6.1

Hi
This is Khurram,
I have just downloaded, and installed "Sun One Java System Web Server 6.1" on WindowsXP. This is installed and working properly on my system. But I want to use Servlet technology on this server, even I did download it just for working on servlets. Before it, I was using typical JavaWebServer2.0 for this purpose.
Any ways.
Can any one tell me, how can I do this on "Java System Web Server 6.1".
Thanks
any help will be appriciated
regards
Khurram

Thanks for your such action.
Actually I have installed it since 2 days, and have read throughly the documentation of WebServer, But Only the Link for this purpose is provided "Programmer's Guide to Web Applications", Now I have just searched for it and found only "Programmer's Guide" .PDF format. I have just read it out now, But here also provided a small refference to see "Programmer's Guide to Web Applications". Now I have just the problem that where to find it.
Please, tell me if you have some solution to my problem
or atleast tell me where to find the refference "Programmer's Guide to Web Applications". I tried but only found "Programmer's Guide" for Sun Web Server 6.1.
Thanks any way to give some time.
Khurram

CF 8 Multiserver & Sun Java System Webserver 7

I am looking for information on how to connect SJSWS 7
virtual web servers to individual ColdFusion 8 instances running in
a multiserver environment.

The package should be available on this website in the"Oracle Fusion Middleware" product list :
https://edelivery.oracle.com/
If you cannot found it, please open a service request on MOS and set this one as non-technical request.

Configure MS SQL Server 2000 DataSource in Sun Java Systema App Server

How can I configure Sun Java Systema App Server 8 to use a DataSource of MSSQL Server 2000?

This has been covered in this forum multiple times. It is also documented in the SJSAS developers guide jdbc chapter. If you still have questions, please post, but the info has previously been discussed here and recently

ColdFusion compatibility with Sun Java System Application Server

Background: A vendor that is doing a project for our
department told us that ColdFusion MX 6.1 is not compatible with
Sun Java System Application Server Enterprise Edition 8.1 and
beyond. Since we are migrating our server environment to this
release of Sun Java System Application Server Enterprise Edition,
we face a difficult situation in that our ColdFusion applications
will no longer run. Thus, we would like Adobe to answer a couple
questions which will help us determine what course of action we
ought to take.
Q: Will applications we developed using ColdFusion MX 6.1 run
on Sun Java System Application Server Enterprise Edition 8.1? Below
is a detailed description of the Sun Java System Application Server
Enterprise Edition we intend to migrate to.
Q: Is Adobe aware of any compatibility issues with this
configuration?
Q: What is Adobe's support commitment regarding future
releases of ColdFusion MX and Sun Java System Application Server
Enterprise Edition? Does Adobe intend to continue support this
environment?
Configuration: Sun Java System Application Server Enterprise
Edition 8.1_02 (build b24-p11)
Below is the specification levels for the 8.1 server
(J2EE1.4), note it can use J2SE 1.4.2_06 or 5.0 as the JAVA
runtime.
J2EE 1.4 compatible
Components: J2SE 1.4.2_06 or J2SE 5.0
Application and Application Client
Enterprise JavaBeans (EJB) 2.1
Java Servlet 2.4
JavaServer Pages(JSP) 2.0
J2EE Connector Architecture 1.5
JMX 1.2
JMS 1.1
Java Naming and Directory Interface (JNDI) 1.2
and Java Transaction API (JTA) 1.0
Web Services:Java Web Services Developer Pack 1.5
Java APIs for XML Registries (JAXR) 1.0
Java API for XML-based Remote Procedure Calls (JAX-RPC) 1.1
SOAP With Attachments API for Java (SAAJ) 1.2
WS-I Basic Profile 1.0
Other:J2EE Deployment 1.1
J2EE Management 1.0
Java API for XML Processing (JAXP) 1.2
JavaMail 1.3
Java Authentication and Authorization Service (JAAS) 1.0
Java Authorization Contract for Containers (JACC) 1.0

First of all, is there a reason why you are using jRockit?
Since the issue appeared after upgrading the windows, the issue would potentially be in the interaction between JVM and OS.
Also, there were some issues related to memory leak that were fixed in AS 8.2.
May be you should try with a Sun JVM and AS 8.2.

Sun Java System Calendar Server 2005q1 configuration issue

Hello,
I have installed Sun Java System Calendar Server (and dependencies systems) using the Java Enterprise System 2005Q1 on a Windows Server 2003 platform for an integration evaluation purpose. While configuring Sun Calendar Server it throw those message that comes in the console window:
Cargando propiedades predeterminadas...
com.sun.cal.install.instvars.InstallVariables::InstallVariables: SERIOUS ERROR:
BUILD PLATFORM NOT RECOGNIZED!
com.sun.cal.install.instvars.InstallVariables::setPlatformDefaults: SERIOUS ERRO
R: BUILD PLATFORM NOT RECOGNIZED!
com.sun.cal.install.util.IcsConf::readIcsConfFile: Cannot read null\ics.conf.tem
plate: Exception java.lang.Exception: File "C:\Sun\CALEND~1\bin\config\null\ics.
conf.template" does not exist
LoadWizardStateDefaults->Error: Could not read server configuration template fil
e "null\ics.conf.template": Cannot read "null\ics.conf.template: File "C:\Sun\CA
LEND~1\bin\config\null\ics.conf.template" does not exist
novalidate option set to: false
Ha terminado la carga de propiedades predeterminadas.
Espere.: Obteniendo el DN base del servidor LDAP
RuntimeSetupPanel->Error: Invalid boolean value: null. Setting default value to
true.
RuntimeSetupPanel->Error: Invalid boolean value: null. Setting default value to
true.
El directorio especificado estß vacÝo, especifique un directorio vßlido
<Pulse INTRO para continuar>
{code}
The installation complete but Calendar Server could not be started with start-cal command throwing a configuration error. I've searched on google and on this forum to find a solution but seems that no one has encountered a similar problem. Hope can find some help.

Mattek wrote:
I have installed Sun Java System Calendar Server (and dependencies systems) using the Java Enterprise System 2005Q1 on a Windows Server 2003 platform for an integration evaluation purpose.At this point I have to ask, why would you install such an old version of Java Enterprise Systems and most importantly why would you install on a platform that has been dropped for several years -- JES 2005Q4 was the last version to provide calendar/messaging/im server on Windows?
com.sun.cal.install.instvars.InstallVariables::InstallVariables: SERIOUS ERROR:
BUILD PLATFORM NOT RECOGNIZED!
com.sun.cal.install.instvars.InstallVariables::setPlatformDefaults: SERIOUS ERRO
R: BUILD PLATFORM NOT RECOGNIZED!Windows Server 2003 is not a supported platform for JES 2005Q1:
http://docs.sun.com/source/819-1573/index.html
It is however supported with JES 2005Q4:
http://docs.sun.com/source/819-4261/index.html
Regards,
Shane.

Configuration of Sun Java System Application Server PE 8.2

Hello,
I want to start learning Enterprise JavaBean with Sun Java System Application Server PE 8.2. Pls, can any person let me know how to set the CLASSPATH.
Again, I would be happy if I'm introduced to the site where I can learn how to use it.
Thanks

SJSAS PE 8.1
http://sunsolve.sun.com/search/printfriendly.do?assetkey=1-21-119173-18-1

Sun Java System Portal Server 6.0 FAQs

Sun Java System Portal Server 6.0 FAQs.
Author: Sanjeev Agarwal
Q. How to connect to external URLs from Sun ONE Portal Server? I want to use URL Scrapper for some of external sites/URLs.
Ans:
You can connect to external URLs if you have a Proxy Server running.
If you are using Web Server addition of Sun ONE the Portal Server then
go to /opt/SUNWam/servers/https-hostname.domainname/config/ dir
In the jvm12.conf file, enter the followings:
http.proxyHost=proxyservername.domainname
http.proxyPort=80 (or the appropriate proxy server port number)
https.proxyHost=proxyservername.domainname
https.proxyPort=80 (or the appropriate proxy server port number)
If you are using Sun ONE AppServer addition of Sun ONE Portal Server then
go to /var/opt/SUNWappserver/domains/domain1/<server-instance>/config dir
In the server.xml file, enter the followings:
<jvm-options>-Dhttp.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttp.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
<jvm-options>-Dhttps.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttps.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
After this modification restart the server.
Q. Explain all the processes (solaris 8 and S1 Portal Server 6.0) which runs when I start the Sun ONE Portal Server.
Ans.
These are the processes that a running Portal Server installation (Sun ONE WebServer addition, without SRAP) generally has by default.
1. Directory server processes:
- ns-slapd (LDAP server instance)
- uxwdog (admin server process) (parent process)
--- ns-httpd
----- ns-httpd
2. Auth Helper processes:
- doUnix
3. Web-Server/Identity-Server/Portal-Server processes:
As the Portal Server and Identity Server runs as web application on the Web Server, so they share the same JVM and processes.
- uxwdog (web server admin server process) (parent process)
--- ns-httpd
----- ns-httpd
(for each web server instance)
- uxwdog (parent process)
- ns-httpd
- ns-httpd
or (in case of MaxProc=n )
- uxwdog (parent process)
--- ns-httpd
----- ns-httpd
----- ns-httpd
----- n
Q. I have created a custom Provider but getting this error when I access the desktop, what do I do?
> error in the desktop.debug file:
> ERROR: DesktopServlet.handleException()
> java.util.MissingResourceException: Can't find bundle for base name CustomTabContainerProvider,
Ans:
It needs a resource bundle for the custom provider. You need to create a file CustomTabContainerProvider.properties (as mentioned in the error message) and put it into the /etc/opt/desktop/classes directory. If you are not using any properties defined in this resource file then it can be a empty file. Have a look on the properties files that bundled containerProviders uses in dir <portal-install-dir>/SUNWps/web-apps/https-<host.domain>/portal/WEB-INF/classes.
As you are extending JSPTabContainerProvider class, you can just copy the file JSPTabContainerProvider.properties from the above directory after renaming it to the <defined-provider-name>.properties (in your case CustomTabContainerProvider.properties) and move it into /etc/opt/desktop/classes directory.
Q. what is actually multiple instances of Portal Server means?
Ans:
Multiple instance of Portal Server means, you will have more http listeners for the same desktop contents and the same identity profiles stored in a single Directory Server which all the instances share.
In simple words you can have your Portal Server listening on different http ports, but uses same configuration, desktop and identities.
It can help you to share the load for Portal Server http requests. The alternate methods are to create more web server virtual server processes (maxProc=n, but in this case the listening port will be 1 only) or use some hardware load balancer.
You can achieve more from multiple instances if you have a multi level organization, you can change the look and feel of all the instances, images, services, components and can assign each instance to different organization or sub-organization.
Q. How do I check the availability of the Sun ONE Portal Server/Identity Server services.
Ans:
You can check the availability of Sun ONE Identity Server services from following urls.
http://<host.domainname>:<port>/amserver/sessionservice
http://<host.domainname>:<port>/amserver/loggingservice
To know the availability of components of Sun ONE Portal Server like Desktop/providers/Rewriter/Netmail you have to login into desktop. These are not services, but just the programming identities which will work if your Web Server and Identity Server is running.
Just go to URL http://<server>:<port>/portal/dt , if it shows up that means your portal server is fine, and these entities will work for sure.
Q. I am able to add the yahoo channels to existing users. But I am getting the weather for London not for local New Jersey. My language pref is to en|en_US and also the server is the default U.S server and not europe. How do I add the cities I want to see on weather channel?
Ans:
A Portal user himself (after login) can select what cities he want to see in weather channel.
Steps:
- click the edit button of weather channel
- click on the area you belong to from Available Sections
- select the cities from Available Cities select box and add them to Your Choices.
- click finished from select city page and then again click finished from select area page.
It will come back to the Portal Desktop and you will see all the cities you have selected in the weather channel.
Q. How to use getContent() method to use in custom jsp providers (developed by ourselves) so that it can be used to retrieve a jsp page. I have already placed the JSP file in the directory structure /etc/opt/SUNWps/desktop/default/channel_dir. But still the jsp is not being displayed.
Ans:
You don't have to do anything in the custom JSPProvider's getContent method except the call { return super.getContent(request,response); } . If all you want is just to show your jsp, then create a channel from the default JSPProvider, and edit the property contentPage of that channel from samplecontent.jsp to your jsp name, save the changes and login again. You should see your JSP.
Q. I want to remove all the buttons (help/edit etc.) from all the channels/one particular channel in my desktop?
Ans:
You can hide any buttons you want from any channel.
These steps show how to hide all the buttons.
1. Create a channel say "myNetlet" from netlet provider.
2. Set the channel title to "myNetlet"
3. Go to the dir /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider and edit the file providerCommands.jsp, and modify the last line :
from :
<%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%>
to:
<% if ( !(title.equals("myNetlet"))){ %><%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%><% } %>
4. Clean the dir mentioned below which contains compiled JSPs. /var/opt/SUNWps/https-<host>.<domain>/portal/tmp/_jsps/_etc/_opt/_SUNWps/_desktop/_default_en/_JSPTableContainerProvider/_html and reload the page.
Relogin, and you would not see any buttons on "myNetlet" channel. You can customize this logic as per your needs.
Q. How to change the title of SampleJSP Channel. I tried to change the channel properties title value via iplanet directory Server Access Management GUI. But it is not getting reflected.
Ans:
Through Admin console you can change the channel property "title", and as soon as you refresh the page (Shift reload) of relogin in the portal it get's reflected.
The reason to this problem may be due to the channel property "title" is having "propagate" value as false and you are setting the channel title in the org level display profile not in the user level display profile.
So better you change the channel name in user's display profile also.
For this login into admin console and go to :
- View: "User Management" -> click on organization -> Show: Users
- click on the blue arrow of that user
- click on Edit in section Desktop (this will open a window)
- then change the channel properties same way you do for Organization display profile.
Q. Login Problem with SunOne Portal 6.0.
I was able to download and install sun one portal 6 on Solaris 8. The sample portal page came up after installation. However whenever I try to login to the Login channel with "amadmin" and the passphrase I used during installation, it takes me to another page - iPlanet/LDAP authentication page. Here I tried using the same login, but fails every time (the same login page appears). The url that shows is "http://<hostname>/amserver/login?module=dproadmin&goto=/amconsole/base/AMAdminFrame"
I tried registering myself as a new user as well. This too fails.
Ans:
Make sure you are giving fully qualifying the hostname in the url which invoked the desktop. This in fact is documented in the administration documentation. If the hostname is not fully-qualified, the login page goes into an endless mode. Again, the correct url is "http://<fully-qualified-hostname>/portal". Once you get to the desktop, the login and the new user registration works.
Q. How to send variables/parameters from 1 app to another app deployed on Sun ONE Portal Server? It may be the apps or different JSPs of JSP provider channel.
How to achieve inter channel communication in Sun ONE Portal Server?
Ans:
You can use servlet context object or session, or may be the request object itself to store the information from one channel and use that in another channel. The use of either of these 3 approaches may depend on your requirements. Using session, the information will be available to that user's channels only, using request, the information will be available for that user and that request only and by using ServletContext you can share the information across users and sessions. You can obtain DesktopServlet's ServletContext object inside JSP/JSPProvider.
Q. I am trying to modify the default desktop JSPs in TableContainerProvider and TabCotntainerProvider dirs, but it is not picking my modified JSPs ? what do I do?
Ans:
One easiest way to 100% ensure that it updates all your new jsp pages is to remove all the compiled jsps so that with next request the Sun ONE Portal Server compiles all the jsps and will make sure that your modification will be taken care of in next request.
Go to /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ and remove everything. and access the Portal server, it will be little slow as it has to compile all the JSPs again. Here you will find directories in the name of Containers and Channels, so if you are modifying any particular Container/Channel you can just delete that only. This approach can help a lot during development time.
Q. What is the location of compiled JSPs in Sun ONE portal Server and what servlet spec does it supports?
Ans: The Portal server 6.0 runs on Sun ONE Web Server 6.0 sp2, which supports only jdk 1.3 and servlet spec 2.2 only. The Sun ONE Portal Server keeps the compiled jsps of desktop and channels in : /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ dir as per the channels/container names.
Servlet 2.3 is supported if you run the Portal Server edition that runs on Sun ONE Application Server 7.0.
Q. How do I change jdk for Sun ONE Portal Server to another jdk? I want to change the JDK of only one of my Portal Server instances, is it possible? how?
Ans:
Yes you can achieve both.
A. To change the JDK for all the server instances:
Open <portal-install-dir>/SUNWam/servers/https-admserv/start-jvm file and modify the first line
NSES_JDK=/usr/java_1.3.1_04; export NSES_JDK
to
NSES_JDK=<your-jdk-location> ; export NSES_JDK
then open <portal-install-dir>/SUNWam/servers/https-<instance-name>/config/jvm12.conf file of all the server instances and add a line
jvm.option=-server after the first line
B. To change the JDK for a particular server instances:
Make a another copy of the start-jvm file rename it and modify the jdk location in it as mentioned above.
Open the start script from <portal-install-dir>/SUNWam/servers/https-<instance-name> dir and modify these lines :
if test -r {SERVER_ROOT}/https-admserv/start-*
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/start-*
modify this to
if test -r {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
Note: As Portal Server 6.0 uses Web server 6.0 sp2, jdk 1.4 is not supported.
Q. How do I create a custom login page or a link, which will just log me into the portal server.
Ans:
You can create a custom page in your jsp page, just add this portion of html into your web page :
<FORM action="http://<server>:<port>/amserver/login?module=<login-module>&page=1" method=post name=login_form2 target=_top>
Login page using <login-module><br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
The <login-module> can be LDAP or Unix or Membership which ever you have enabled. Or instead of this you can create a link. For example for LDAP auth module :
"<a href="http://<server>:<port>/amserver/login?module=LDAP&page=1&TOKEN0=user&TOKEN1=password" target=_top> Login into Portal </a>"
where user and password are the user credential for the portal server.
Q. Can I install a portal server pointing to another Identity server? I want to install few postal servers (on different machines) pointing to same identity server, is it possible?
Ans:
No, right now the Sun ONE Portal Server is tightly integrated with Sun ONE Identity Server so you can't just install only Sun ONE Portal Server and point it to another Sun ONE Identity Server. You can have a common Directory server if you want.
Q. I have an application which takes input in from anonymous user and then to complete the request the user than has to login. I am having problem in passing the taken input from anonymous page to logged in user. all the request parameters are lost when I log in. How do i get the request parameters after I log in
Ans:
You can create a custom login page and submit the form to "/amserver/login" with a hidden parameter "goto" through which you basically specify which url to go after you log in. So you can use this mechanism to create a query string with all your request parameters you want to pass after login. For example:
You can create a jsp which take few inputs from user and to complete the request you have to login so it posts the input form to a login jsp and stores the parameters taken from user in a hidden field (goto) :
<FORM action="/amserver/login?module=LDAP&page=1" method=post name=login_form2 target=_top>
Login page using LDAP<br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<INPUT TYPE=HIDDEN NAME="goto" VALUE="/portal/dt?param1=<%=request.getParameter("param1")%>&param2=<%=request.getParameter("param2")%>">
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
After you login through this page both the param1 and param 2 will be available in the request object after you login and you can retrieve them in your application or jsp.
Q. I have few System.out.println in my jsp which i am using in my JSP provider channel, but when I look at the portal server's /var/opt/SUNWam/debug/desktop.debug file, none are there. I looked at the web server's access and error logs too, but it is not there also. Can somebody tell me how do it get those ? Do we have any other mechanism to put debug logs ?
Ans
By default the binary which web server runs is uxwdog which eats up System.out.println output. If you want to see the System.out.println then you need to change the product binary from the start script of the portal server instance.
- Go to <portal-install-dir>/SUNWam/servers/https-<instance-name> and open the start script
- Change the PRODUCT_BIN=uxwdog to PRODUCT_BIN=ns-httpd , save the file
- Run the script ./start to start the portal server
Note : with ns-httpd ON the server will not leave that shell, and in the same window/shell you will be able to see all your System.out.println statements. To close the server you have to kill the server process with "kill -9 pids" command
Alternate way is to use api inside your application or jsp:
<%@page import="com.sun.portal.providers.jsp.JSPProvider, com.sun.portal.providers.*, com.sun.portal.providers.containers.*, com.sun.portal.providers.context.*" %>
<% JSPProvider p=(JSPProvider)pageContext.getAttribute("JSPProvider");
ProviderContext pc = p.getProviderContext(); %>
<%-- after that you can use these lines any where in your jsp --%>
<%
pc.debugError("your error msg");
pc.debugMessage("your msg");
pc.debugWarning("your warning msg");
%>
The particular mgs will be shwon in /var/opt/SUNWam/debug/desktop.debug file as per your "debugLevel" parameter setting in /etc/opt/SUNWps/desktop/desktopconfig.properties file. By default the debugLevel is set to error so only pc.debugError("error msg") will be shown.
Q. Multipart form (file upload) processing in providers? Is it supported
Ans:
The Sun ONE Portal Server's DesktopServlet does not have the ability to process a request with the content encoding type of multipart/form-data. DesktopServlet does not pass the input stream for the request on to the Provider.
To accomplish handling of multipart/form-data type requests, it is necessary to create a companion servlet or JSP that process the multipart/form-data. This servlet can then pass control back to the Portal channel. The data from the file can be shared between the servlet and the provider by using static Java members or by storing the data in a back-end database and then passing a reference to the data over to the provider.
Q. After installing the Portal Server I am trying to login as admin, but it is failing and coming back to login page every time. How do I login?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Try login using these credentials.
Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
Q. I installed Sun ONE Portal Server 6.0 some time back, and now I want to know all the installation parameters and user/passwords for whole portal installation. How do I do that?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
In case you have forgotten the port numbers and PASSPHRASE that you give during installation, you still can see all the information for each component of your Portal Server Installation. The Portal server and it's components like Directory Server, Web Server and IDSAME are installed as Solaris package so the system has all the information for these packages.
Portal Server : See file /var/sadm/pkg/SUNWps/pkginfo
Directory Server : See files /var/sadm/pkg/SUNWamds/pkginfo and /var/sadm/pkg/SUNWamdsc/pkginfo
Web Server : See file /var/sadm/pkg/SUNWamws/pkginfo
Identity Server : See file /var/sadm/pkg/SUNWamsam/pkginfo
Note: In any case you should never edit/modify these files.
Q. Controlling the display of the help (?) button.
Where are the links/image elements defined for the help/edit/minimize buttons? the leafWrapper.jsp pulls the hashtable out of the HttpRequest, and that hashtable is being used by providerCommands.jsp:
Hashtable commands = (Hashtable)request.getAttribute("provider_cmds");
Any idea where this is being set?
Ans:
- You can remove the help/edit button of any channel by adding the line into the Channel's properties by editing the Xml of display profile in the admin console.
<String name="helpURL" value="" advanced="false" merge="replace" lock="false" propagate="true"/>
<Boolean name="isEditable" value="false" advanced="false" merge="replace" lock="false" propagate="true"/>
The Attribute 'provider_cmds' is set into /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider/tablecolumn.jsp :
<dttable:getProviderCommand id="provider_cmds" scope="request" />, and after that only the leafwrapper.jsp is included, but the Hashtable is generated by a class com.sun.portal.providers.util.ProviderCommands.java and made available through taglib classes. So you can't change the generated contents/string in the Hashtable.
But you can change the default 'alt' text displayed and the images linked to the help/edit icons. As this modification is at Provider level, it will change the icons for all the channels in the desktop.
Please see the file:
/opt/SUNWps/web-apps/https-<host>.<domain>/portal/WEB-INF/classes/JSPTABLEContainerProvider.properties.
Here you will find the mapping. The image location are given from the context root of portal server which is by default : /opt/SUNWps/web-apps/https-<host>.<domain>/portal.
Q. I have a number of web applications needed to integrate to portal server. Any pointers or tips of what my option is?
Ans:
You can very well integrate all your web application with Portal server. Portal Server 6.0 has web container same as Sun ONE web server 6.0 Sp2, which runs on Jdk-1.3.
If your web applications are just Servlets/Jsps then you can very well port them on Portal server's webserver which supports war module deployment. (infect for Web server the Portal server and Identity server is like a war module.)
There can be two possibilities in this case, either you put the whole of your application on portal server and make the link available into the desktop via 'Application Provider Channels' or you can create a client to your web application into portal server.
If your web application is on Sun ONE Application server 7.0 and needs authentication, you can also have SSO. If you just want to show the link of your web application into desktop then you can either use URL Scrapper to show the first page of your web application or use Bookmark channel to provide just the url.
The easiest way to make a client of your web application is to use JSP Channel using JSPProvider and put your logic into the samplecontents.jsp file or you can create your own custom Provider extending JSPProvider. There can be a lot of different configurations, depending on the web application you want to integrate and your needs
Q. I removed few channels from the org level display profile but still they are coming to the desktop of users, I had accessed the desktop before. why?
Ans:
If you still see any channel after you remove it from the display profile at organization lever, that means you have to edit the user's display profile. So go to admin console and select User from Show: menu and click on the blue arrow near the user. In the right frame under the 'Desktop' category click on the Edit link (right side). This will open user's display profile in a window. Now edit it as per your requirements.

Unfortunately Web Server 6.0SP2 is no longer available for download.
If you must use Web Server 6.0, you should use the most current Service Pack. It is backward compatible and contains many performance and security fixes.

How to make weblogic proxy to work on Sun Java system web server 7?

Hi Every one,
I am working on upgrade our Sun one 6.1 webserver to Sun Java system web server 7. Our website uses weblogic server to process jsp, web server only send static pages. I did all configurations as on Sun one. But somehow, the webserver does not forward "get jsp page" request to weblogic. The log record is:
for host 10.78.124.118 trying to GET /home.jsp, send-file reports: HTTP4142: can't find /www/a/WebServer7/docs/bmd9i/home.jsp (File not found)
home.jsp is at weblogic server.
And redirect "NameTrans fn="redirect" from="/" url="/home.jsp"" seems does not work. when I type on IE http://32.69.253.131/ (32.69.253.131 is http listener IP), it always shows index.html page under the document root.
Could some on can help? I am the first time to configurate web server. Thanks in advance.
The configuration files are like:
1. magnus.conf
# Copyright 2006 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
Init fn="load-modules" funcs="wl_proxy,wl_init" shlib="/www/a/WebServer7/weblogic6.1sp6/libproxy.so"
Init fn="wl_init"
2. obj.conf
# Copyright 2010 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# You can edit this file, but comments and formatting changes
# might be lost when you use the administration GUI or CLI.
#<Object name="weblogic">
#Service fn="wl_proxy" WebLogicCluster="32.69.253.86:7210" ConnectTimeoutSecs="240" ConnectRetrySecs="60"
#</Object>
<Object name="default">
<Client method="TRACE">
AuthTrans fn="set-variable" remove-headers="transfer-encoding" set-headers="content-length: -1" error="501"
</Client>
#AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="strip-params"
NameTrans fn="redirect" from="/" url="/home.jsp"
NameTrans fn="redirect" from="/index.jsp" url="/home.jsp"
NameTrans fn="redirect" from="/index.html" url="/home.jsp"
NameTrans fn="document-root" root="$docroot"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/www/a/WebServer7/lib/icons" name="es-internal"
NameTrans fn="home-page" path="index.html"
<If $uri =~ "/*.jsp">
Service method="(GET|HEAD|POST|PUT)" fn="wl_proxy" WebLogicCluster="32.69.253.86:7210" ConnectTimeoutSecs="240" ConnectRetrySecs="60"
#Service method="(GET|HEAD|POST|PUT)" type="text/jsp" fn="wl_proxy" WebLogicCluster="32.69.253.86:7210" ConnectTimeoutSecs="240" ConnectRetrySecs="60"
</If>
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-compressed" check-age="off" vary="on"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain" charset="iso_8859-1"
ObjectType fn="set-default-type" charset="iso_8859-1"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="send-error"
Service method="(GET|HEAD)" type="*~magnus-internal/*" fn="send-file"
AddLog fn="flex-log" name="access"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="send-precompressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>
3.mime.types
I add one line: type=text/jsp exts=jsp

Quick obvious question - Are you positive you're editing the correct obj.conf? Check the config directory and see if there is a second one called something like <instance>.obj.conf (where <instance> is the name of your configured instance).
Alternatively you can grep for object-file in the server.xml to see which obj.conf the server is using:
# grep object-file server.xml
<object-file>bare-php.obj.conf</object-file>Assuming that you are editing the correct obj.conf file, are you making certain to restart Web Server after making your changes?

Sun Java System Access Manager 7.1 config. failed during installation

{color:#0000ff}Hi,
I have installed sun java communication suite 5 on a single host on sun solaris 10.
I have installed required packages and it works fine.
But as per organization need, I have to change domain name.
So i have uninstalled everything and tried to install again with new domain name.
I have made proper entries in hosts file and resolve.conf file.
But duing the first phase of installation only , i failed in configuring access manager 7.1
I have also cerate same scenario in my test environment, but everytime i face the same error.
and sun java access manager 7.1 fails in first stage of installation only.
So would like to know the proper installation procedure while i change the domain name on same hardware...
I have checked both installation logs & summary logs.
But no error, no failed , no severe.
Attached is the summary of installation logs.
Summary Logs :
Installation Summary Report
Install Summary
Sun Java(TM) Communications Suite : Installed
Sun Java(TM) System Web Server 7.0 : Installed, Configured
Java DB : Installed, Configure After Install
Sun Java(TM) System Message Queue 3.7 UR1 : Installed
Sun Java(TM) System Monitoring Console 1.0 : Installed, Configure After Install
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server Enterprise Edition 6.0 : Installed, Configured
Sun Java(TM) System Access Manager 7.1 : Installed, Configuration Failed
Sun Java(TM) System Messaging Server 6.3 : Installed, Configure After Install
Sun Java(TM) System Communications Express 6 : Installed, Configure After Install
Communication Services Delegated Administrator : Installed, Configure After Install
Configuration Data
Sun Java(TM) System Web Server 7.0 :
Web Server Instance installation Directory : /var/opt/SUNWwbsvr7
Web Server installation Directory : /opt
Web Server Administration Server Host : RADAGWMSG221.myreliancemail.com
Web Server Admin Server Mode : true
Web Server only CLI installation : false
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server Enterprise Edition 6.0 :
Directory Server Installation Directory : /opt/SUNWdsee
Sun Java(TM) System Access Manager 7.1 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 80
LDAP User ID : amldapuser
Administrator User ID : amAdmin
Web Container : WebServer
Access Manager Web Server Host Name : RADAGWMSG221.myreliancemail.com
Access Manager Web Server Instance Directory : /var/opt/SUNWwbsvr7/https-RADAGWMSG221.myreliancemail.com
Access Manager Web Server Port : 80
Access Manager Console Host (for Existing console) : RADAGWMSG221.myreliancemail.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : RADAGWMSG221.myreliancemail.com
Access Manager Console Port(for Existing console) : 80
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .myreliancemail.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : RADAGWMSG221
Access Manager Directory Server Host : RADAGWMSG221.myreliancemail.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : o=rmail
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
Sun Java(TM) System Messaging Server 6.3 :
Messaging Server Installation Directory : /opt/SUNWmsgsr
Sun Java(TM) System Communications Express 6 :
Communications Express Installation Directory : /opt/SUNWuwc
Communication Services Delegated Administrator :
Communication Services Delegated Administrator Installation Directory : /opt/SUNWcomm
{color}

Rushi-Reliance wrote:
Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
Regards
Shane.

Timeout or interrupted waiting Start server Sun Java System AppServer 8.1

Hi, i'm new in this.
I have Windows Xp SP2
when i try to start AppServer in NetBeans IDE 4.1, netbeans give me this error "Start server Sun Java System Application Server 8.1 timeout or interrupted"
I try to reinstall AppServer many times but nothing change.
this is the server.log:
[#|2006-01-30T17:49:50.406-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|
C:/Archivos de programa/Java/jdk1.5.0_06\bin\java
-client
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=C:/buildTools/netbeans-4.1/SunAppServer8.1/domains/domain1/logs/server.log
-Djava.endorsed.dirs=C:/buildTools/netbeans-4.1/SunAppServer8.1/lib/endorsed
-Djava.security.policy=C:/buildTools/netbeans-4.1/SunAppServer8.1/domains/domain1/config/server.policy
-Djava.security.auth.login.config=C:/buildTools/netbeans-4.1/SunAppServer8.1/domains/domain1/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=C:/buildTools/netbeans-4.1/SunAppServer8.1/domains/domain1/config/keystore.jks
-Djavax.net.ssl.trustStore=C:/buildTools/netbeans-4.1/SunAppServer8.1/domains/domain1/config/cacerts.jks
-Djava.ext.dirs=C:/Archivos de programa/Java/jdk1.5.0_06/jre/lib/ext;C:/buildTools/netbeans-4.1/SunAppServer8.1/domains/domain1/lib/ext
-Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
-Dcom.sun.aas.configName=server-config
-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
-Ddomain.name=domain1
-Djmx.invoke.getters=true
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-Dcom.sun.aas.promptForIdentity=true
-Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
-Dcom.sun.aas.instanceRoot=C:/buildTools/netbeans-4.1/SunAppServer8.1/domains/domain1
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
-Dcom.sun.aas.domainName=domain1
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dproduct.name=Sun-Java-System/Application-Server
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
-Dcom.sun.aas.configRoot=C:/buildTools/netbeans-4.1/SunAppServer8.1/config
-Djava.library.path=C:\Archivos de programa\Java\jdk1.5.0_06\jre\bin\client;C:\buildTools\netbeans-4.1\SunAppServer8.1\lib;C:\buildTools\netbeans-4.1\SunAppServer8.1\lib;C:\Archivos de programa\Java\jdk1.5.0_06\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\buildTools\netbeans-4.1\SunAppServer8.1\lib;C:\buildTools\netbeans-4.1\SunAppServer8.1\bin;C:\buildTools\netbeans-4.1\SunAppServer8.1\lib;C:\buildTools\netbeans-4.1\SunAppServer8.1\bin;C:\buildTools\netbeans-4.1\SunAppServer8.1\bin;C:\buildTools\netbeans-4.1\SunAppServer8.1\bin;C:\Archivos de programa\Archivos comunes\Borland Shared\BDE\;C:\Archivos de programa\Borland\BDS\3.0\Bin;C:\ARCHIV~1\Borland\CBUILD~1\Bin;C:\ARCHIV~1\Borland\CBUILD~1\Projects\Bpl;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\QuickTime\QTSystem\;c:\Archivos de programa\Microsoft SQL Server\90\Tools\binn\;C:\ARCHIV~1\ARCHIV~1\AUTODE~1;C:\buildTools\netbeans-4.1\SunAppServer8.1\bin
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-cp
C:/Archivos de programa/Java/jdk1.5.0_06/lib/tools.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib/appserv-rt.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\activation.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\admin-cli.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\appserv-admin.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\appserv-cmp.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\appserv-ext.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\appserv-jstl.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\appserv-upgrade.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\commons-launcher.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\commons-logging.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\dom.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\j2ee-svc.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\j2ee.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\jax-qname.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\jaxr-api.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\jaxr-impl.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\jaxrpc-api.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\jaxrpc-impl.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\jmxremote.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\jmxremote_optional.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\jsf-api.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\jsf-impl.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\mail.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\relaxngDatatype.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\rmissl.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\saaj-api.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\saaj-impl.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\xalan.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\xercesImpl.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib\xsdlib.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib/install/applications/jmsra/imqjmsra.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/imq/lib/jaxm-api.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/imq/lib/fscontext.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/lib/ant/lib/ant.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/pointbase/lib/pbclient.jar;C:/buildTools/netbeans-4.1/SunAppServer8.1/pointbase/lib/pbembedded.jar
com.sun.enterprise.server.PEMain
start
display
native|#]
[#|2006-01-30T20:12:42.515-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [C:\buildTools\netbeans-4.1\SunAppServer8.1\imq\bin].|#]
[#|2006-01-30T20:12:42.515-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.core|_ThreadID=10;|CORE5098: AS Socket Service Initialization has been completed.|#]
[#|2006-01-30T20:12:42.921-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2006-01-30T20:12:43.015-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-01-30T20:12:43.437-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.container.web|_ThreadID=10;|Created virtual server server|#]
[#|2006-01-30T20:12:43.437-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.container.web|_ThreadID=10;|Created virtual server __asadmin|#]
[#|2006-01-30T20:12:43.843-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.resource.corba.S1AS-ORB.rpc.transport|_ThreadID=10;|"IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/3700"|#]
[#|2006-01-30T20:12:44.031-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.resource.corba.S1AS-ORB.rpc.transport|_ThreadID=10;|"IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/3820"|#]
[#|2006-01-30T20:12:44.031-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.resource.corba.S1AS-ORB.rpc.transport|_ThreadID=10;|"IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/3920"|#]
[#|2006-01-30T20:12:44.609-0600|INFO|sun-appserver-pe8.1_02|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [3700]|#]
Thanks for any help.

I make some test and i try make a new domain with diferents port:
adminport: 6666
instanceport 7777
and now give me this error
-Port conflicts
-Incorrect server configuration (domain.xml to be corrected manually)
-Corrupted Deployed Applications preventing the server to starts
i think maibe is the configuration, someone now, how is correct configured?

Adding a JDBC driver in Sun Java System Web Server 7

I'm trying to configure JDBC database connection pooling for a Microsoft SQL Server 2005 Express Edition though the Sun Java System Web Server 7 administration console. I don't want to use the MSSQL JDBC driver that comes bundled with the SJSWS 7. So I've downloaded the lastest MSSQL JDBC driver from the Microsoft website and put in the "lib" subdirectory of the SJSWS installation directory. So when I go to add a new JDBC resource through the administration console, the newly added MSSQL database driver doesn't appear in the "Driver Vendor" drop-down box.
How do I add the downloaded JDBC driver to the server so that it appears in the "Driver Vendor" drop-down under "Create JDBC resource".

Check this documentation from MS on using the JDBC driver with DataSource
http://msdn2.microsoft.com/en-us/library/ms379052.aspx
SJS Web Server 7.0 should work with any driver that has support for javax.sql.DataSource. The great majority of drivers do.
So instead of using the driver name, use the DataSource class name:
com.microsoft.sqlserver.jdbc.SQLServerDataSource
The properties to add should be:
user=username
password=password
servername=sql_server_hostname
portnumber=sql_server_port
databasename=databasename
In general, all the setters required to get the datasource configured can be set as properties.

Sun Java System Web Server 7.0 available

I am delighted to announce that Sun Java System Web Server 7.0 is now available for download, purchase, deployment, and more.
This release builds on the highly scalable and stable heritage of Web Server. It features an entirely re-designed Administration interface designed around clusters, easy access to frequently performed tasks, simplification of frequently performed tasks., and a fully scriptable command line interface featuring functional parity with the browser-based interface.
In addition to the administration changes this release features:
o Full 64-bit support for Solaris SPARC and Solaris AMD64 platforms
o Regular expression pattern matching for URL re-writing and mass hosting
o If/Then/Else constructs within request processing
o Advanced sed based input and output filters
o Dynamic loading of Certificate Revocation Lists (CRLs) without requiring daemon restart
o Elliptic Curve Cryptography (ECC)
o Built in request mapping for protection against abnormal load patterns and Denial of Service protection
o WebDAV ACL support
o Out-of-box Java support for Servlets 2.4, JSP 2.0, JSF 1.1, JSTL 1.1, JWSDP 2.0 based web services
o Java session failover and recovery within a cluster of peers
o Integrated HTTP reverse proxy User-Agent
o Bundled FastCGI client for use with third party scripting environments such as Perl, PHP, Ruby on Rails, etc
o Enhancement of perfdump, stats-xml, and SNMP as well as more ability to monitor the Java container and the ACL system
o Much more
The software can be downloaded from:
http://www.sun.com/download/products.xml?id=45ad781d
The documentation is available at:
http://docs.sun.com/app/docs/coll/1308.3

If 7.0 was released, how come http://www.sun.com/webserver still only talks about 6.1?

Configuring Sun Java System webserver 6.1 SP2 to JBOSS 4.0

Similar Messages

Maybe you are looking for