Configuring syslog and generating logs for a particular period.

Hi...
I have configured syslog server and the loggin enabled on ASA device... I want to generate the complete logs for a particular period of time. How can I generate this report.. Please help me

Hello,
I have an idea how it might work, but it is not certainly the best solution so if you will not find any other, this might work for you.
Enable sending logs to syslog server:
logging source-interface loopback
logging
configure EEM script to run "show log" periodicaly:
event manager applet test
event timer watchdog name test_name time 60 ! in seconds -> every minute
action 1.0 cli command "show log"
Best Regards
Please rate all helpful posts and close solved questions

Similar Messages

I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system i

I bought a pdf book last year and had no problem reading it for a few months then all of a sudden I could no longer open it and to this day. Any other pdf download off internet I can still open and read, except for that particular book. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help..

Thank you for your reply. Operating system is Windows 7 Home Premium, Adobe Reader XI 11.0.07. When trying to open file I get msg "You did'nt login or your session has expired. Please log in to read this document for the first time". (Like I said I have read it before). So I log in but that prompts me to give the name of the file I want to export or convert to Word or something else, which is not what I want to do of course. I have not purchased any service from Adobe or Acrobat as I only need to read. Thanks for your help.

How to generate SIDs for a particular range of data for a DSO ?

Hi All,
Please let me know if there is any way to generate SIDs for a particular range of data for a DSO which does not have any SID values. I need this as when i am trying to load data from DSO to InfoCube it's taking a lot of time. When i tried to find the reason behind it, i came to know that most of the time is going in SID creation for the data which is getting loaded. Please share some solution for the same. Thanks...

Hi,
Try this.
Create an internal table and populated it with the values present in the F4 help of the field. Then in AT SELECTION-SCREEN event check the value of the field with the values in the internal table and display the appropriate message.
Sharin.

How to find expense and revenue of a company code for a particular period

Hi Gurus,
I am new to FI. I need to find out the revenue, expense and gross profit of a company code for a particular period.
for eg: I need to find the revenue, expense and GP of a comapany code 'ZYZM' for the month of july. Is there
any standard report for this or any way to see P&L statement for this period?
Thanks and regards,
Ashish Kumar

Hi Ashish
You can use report S_PL0_86000030 - G/L Account Balances (New) for the period wise report.
You can select as Mani mention P&L account statement type as X in dynamic selection and give the period for which you require the balance.
The report will give you the three balances
Opening
Till previous period
for the period
Hope this report will help you.
Regards
Pankaj P

WIP QTY. AND VALUE IN SINGLE REPORT FOR A PARTICULAR PERIOD

Is there any report for a particular period that we can get the WIP qty. and value in single report. If there what the fileds we have to select.
Ex. We want what is the consumption qty. and value and what is the GR qty. and value for the period ending June 08.

Hi,
You can use the T-Code KKAS to get the WIP Qty against a given plant/material combination.
some of the other supporting t-codes are:
KKAO                 WIP Calc.: Collective Processing
KKAQ                 Display WIP - Collective Processing
KKAT                 WIP Display for Product Cost Coll.
KKAV                 WIP Calculation for Cost Object Hier
KKAW                 WIP Display Cost Object Hierarchy
KKAX                 WIP Calculation for Order
KKAY                 WIP Display for Order
Regards,
JLN

How to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word

how to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word
ranki

Hi,
You can use Performance Monitor and add the required counters.
Check the below Technet article on Performance Monitor.
http://technet.microsoft.com/en-us/library/cc749249.aspx
Below are the steps to monitor the process in Performance Monitor.
- Go to the Performance Monitor.
- Right-click on the graph and select "Add Counters".
- In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
- In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
Regards,
Jack
www.jijitechnologies.com

How to obtain profit centers and cost centers for a particular GL account

Hi Gurus
Can you please suggest me a table or a function module to obtain profit centers and cost centers for a particular GL account.
Thanks in advance for help!
Regards
Ankit

Hi There, I have a simillar problem as above, however I would like a list of all G/L Accounts with profit centres and cost centres as well. Is this possible? Reason being that I have many unassigned cost centres and need to link them to profit centres.
Is there also a mass processing list to see which G/L accounts dont have primary elements assigned?
Regards,
Edited by: Luke Saloojee on Jul 29, 2008 8:12 AM

Report of Balance GRs for a particular period.

Dear Gurus,,
How can I generate a report of balance/pending GRs for a particular period for invoice parking.i.e Materials recd.,GR prepared but Invoice is not recd.or parked againest such GRs.
Thanks

Hi
Try with ME2N or ME2M or ME2L with selection parameter RECHNUNG - open invoice.
Thanks/karthik

T Code for Project Stock for a particular period

I want to check my project stock for a particular period, is there any Standard T Code, if not how to find the solution. Please revert me the solution.
Thank you.

Hi
Please check the following Report
S_P00_07000140 - Inventory and Raw Material for Special Stock Report
To access the report, from the SAP Easy Access menu, choose Accounting >> Financial Accounting >> General Ledger >> Reporting >> Tax Reports >> Thailand >> Inventory and Raw Material for Special Stock Report
OR
please try to create a Query by using the following tables..
MSPR
MARA
MAKT
Tnx.
Abdul

Report for analyse the sales realisation for a particular period

Hi guys,
Is there any report for analyse the sales realisation for a particular period.
thanks
murali

Able to find the solutin the report S_AHR_61016532 it self.

Report for employees net and gross pay for a pay period

Hi Gurus
How should I approach to write a report which gives employees net pay, gross pay and cost center for a pay period?
Do i have to use cluster tables?
As I am new to this module any help will be appreciated.
Thanks in Advance

Unless you store your payroll results in Infotypes then yes you would have to retrieve this information from the PCL2 Cluster. The Cost Center information would come from the WPBP table and the Gross and Net Pay from the RT table.

How do we calculate Accumulated Depreciation for a Particular Period

Dear Members,
How do we calculate the Accumulated Depreciation for a particular asset. It would be great if some body can explain me ,what tables should we use.
I read that Accumulated Depreciation is nothing but deprn_reserve column in fa_deprn_summary table. I have to make a report which should show the accumulated depreciation for an asset by period name. (eg : For MAY-07 the report should give the accumulated depreciation for that asset).
Please give your suggestions.
Thanks
sandeep

Hi,
You can use DEPRN_RESERVE from fa_deprn_summary to get accumulated deprn. Make sure you select the latest row from fa_deprn_summary for a particular period.
Use FA_DEPRN_PERIODS to join with period_counter if you wnat to use Period Name as criteria.
Cheers
Sunil Chawla

How to increase or Decrease Budget for a Particular Period

Hello All,
Can some tell me how to increase/decrease fund for a particular period.

You can pass the manual entry & ensure to choose the balance type to budget
To increase the balance for a specific period- Input the balance to debit side
To decrease the balance for a specific period- Input the balance to credit side
No need to balance the debit & credit totals for budget journals.

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

Prevent logging for a particular interface ?

Hi Guys,
In our xi landscape we have one interface with the credit card data and it is synchronus and we have other interfaces also which are synchronus. Is it possible to prevent the logging for particular interface ?
any help would be really appreciated
Thanks,
Srini

Hi,
As per SP13 Release Document it is possible to restrict access of certain users, for this go thru this link
http://help.sap.com/saphelp_nw04/helpdata/en/ff/42ad423442c611e10000000a1550b0/content.htm
Reward points if helpful******
Thanks,
Madhu

Configuring syslog and generating logs for a particular period.

Similar Messages

Maybe you are looking for