Configuring TCP Locators on Windows 64bit

We are converting LC clustering from UDP to TCP locators, on windows 64 bit, we would like to create a service or find an automated way to call the batch files. This will be vital, when many clusters are patched and restarted, as it is redundant to maunally login and start the locators for each server.
We tried configuring a JavaService but, it wouldn't stop the locator successfully. Due to some incompatibility, we get a null pointer class exception. Therefore, I'd like to know if anyone has a similar setup and how you have achieved it.
Aditya

For viewer benefit
http://blogs.adobe.com/livecycle/2012/06/windows-service-for-tcp-locator.html

Similar Messages

Error when configuring Siebel Server in Windows server 2003

Hi
I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     Error in transferring input values ,num of arrays incorrect 0, expected : 1
GenericLog     GenericError     1     000000024f580f64:0     2012-03-08 01:13:22     TransferInputsToValues returned error:3611539 to SetControlValues
GenericLog     GenericError     1     000000024f58096c:0     2012-03-08 01:13:33     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     NSS - ErrCode 4597527 SysErr 0
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃
GenericLog     GenericError     1     000000034f58096c:0     2012-03-08 01:13:35     ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸     ֓呸     ֓㷕粃Ꞡ粈㶻粃

Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
Hope it helps,
Wilson

Install Oracle Clusterware/RAC Windows x32bit or Windows 64bit ?

Hi,
What is your suggestion to install Oracle Clusterware RAC on Windows.
Why choose Windows 32 bit ?
Why choose Windows 64 bit?
What are the advantages and disadvantages?

Hi,
I definitely recommend 64bit Windows, the principal reason is memory addressing limitation.
In my standpoint do not exist benefits to use Windows 32bit with Oracle Clusterware/RAC.
32-bit processors have address registers that are 32-bits wide (can address up to 4GB physical RAM).
You can to use a workaround by enabling the addressing of more than 4GBytes using parameters in Windows (AWE/PAE). But if I want to use more than 4Gbytes, I'll go to Windows 64bit.
The 4GB addressable space per process is divided into system and user space. By default, the system space is 2GB and the private user space is 2GB. Each user process shares the same 2GB System address space.
The services of the Clusterware, ASM and Listener will consume at least 1Gbyte of memory initially.
If you create an instance to to use 1Gbytes and you have 50 connections you will have problems with connections to the database raising the following error.
TNS-00510: Internal limit restriction exceeded
32-bit Windows Error: 8: Exec format error
TNS-00507: Connection closed
32-bit Windows Error: 109: Unknown errorReason: Problems of memory usage. i.e. Out of Memory.
Another point:
With Windows 32-bit using Clusterware/RAC 11.1 you can set Automatic Memory Management(AMM) feature (MEMORY_TARGET) but you cannot use if you create 2 Instances on same Host.
Check this note..
*ORA-27102, OSD-00031 Unable To Extend Memory_max_target And Memory_target Past 2GB [ID 842881.1]*
Oracle Solution: Please install the 64-bit OS on 64-bit server, hence there is no memory limitations
I belive that is reason wich Oracle not support Oracle Grid Infrastructure 11.2 on Windows 32-bit. You cannot use ASM 11.2 on Windows 32-bit.
Definitely do not exist reason for me to to use Windows 32bit to support Oracle Clusterware.
There are lot services involved wich require memory and a big limitation of memory on 32-bit.
At present all latest CPUs support 64bit. Then install Oracle Clusterware/RAC x64, even when you are use less than 4GBytes memory, you only have benefits.
Benefits of Use 64-bit are:
64-bit versions of Windows have implemented up to 16 terabytes of virtual address space
64-bit programs use the 16 terabyte tuning model (8TB user / 8TB kernel)
No performance penalties for large memory
Unlimited user connectivity
64-bit Windows versions allow addressing of large physical memory sizes without using PAE
*Windows Memory Configuration: 32-bit and 64-bit [ID 873752.1]*
This document gives a better understanding of my perspective.
http://levipereira.wordpress.com/2011/02/12/comparison-of-32-bit-and-64-bit-oracle-database-performance-on-the-dell-poweredge-6850-server-with-microsoft-windows-server-2003/
Regards,
Levi Pereira

Problem installing itunes on windows 64bit

problem installing itunes on windows 64bit, help me!!!

Yes, when I try to install the iTunes software on my notebook, running Windows 7 64-bit, I get a window that says: "There were errors before iTunes could be configured. Error during installation. Computer was not changed. "thanks

ODBC Driver at Windows 64bit 2003

Dear All,
I tried to install the Oracle ODBC driver for the windows 64bit 2003 but the driver did not added to the ODBC drivers list in the "Data Sources (ODBC)" at the Administrative tools in the control panel.
This is a big problem for me because I need to add Oracle database at the SQL server as a Linked Server and the SQL server need the OLE DB Provider which comes with the ODBC driver
Please provide me with ODBC driver or direct me to the right direction
Thanks in advance
Rashed

OpenLink Software provide Oracle ODBC Drivers for 64bit Windows which are available for download from:
http://bit.ly/8Ut5qN
Details on installation and configuration is available from:
http://bit.ly/4vHs7E
Best Regards
Product Support
OpenLink Software
http://www.openlinksw.com

Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

There are so many different error and problems peopl are having.
This is a link to mine
https://discussions.apple.com/thread/3467825
I think it has to be something on Apples end.
Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
hope this settles you a bit

Issue in 11.1.2 Essbase configuration on Linux 5.5 64Bit - Config hangs

Hi Experts,
I am trying to do a fresh install and configure of EPM 11.1.2 in a distributed environment:
1. Oracle database version 11.20as repository on Linux server 1(linux 5.5, 64 bit) installed and working fine.
2. I installed and configured HSS on a Windows 2008 server SP1 64 bit - configured following: common settings, database,OCM,deploy to Application Server - Success. and I am able to open the HSS front end and check users,groups etc.
Now, I installed Essbase server,EAS server,ES server,EIS server on Linux server 2(5.5,64 bit).
The Problem is: When I am configuring Linux server 2(All the above mentioned Essbase components) -
Configurator asks for "Previously configured SS database"- I provide the details
next -> it asks for ES,EAS database schema -> I provide the details
next -> asks for weblogic domain information -> 2 options there -> I choose- > Deploy to an existing domain -> All the required info was already there(Windows server above)
BUT, when I click "next" -> the screen just Hangs and does not go anywhere. I waited for 1 hr and nothing happened.
So, I cancelled it and started the config again, but again the same issue.
the message on the linux server console are:
"HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
ConfigurationManager not available"
and No logs are generated under /oracle/Middleware/user_projects/epmsystem1/diagnostics/logs/config
any help on this will be greatly appreciated!!
this is a bit urgent ..please reply.
thanks,
Ankit

Can we even have the following landscape?
1. HSS,OHS,Weblogic server,workspace - On a Windows 2008 server
2. Essbase server,EIS server,EAS server,EIS server - on a Linux server
3. Oracle database on another linux server.
my questions is, can we have the installation and configuration done considering the OS (wid and Linux), as described in points 1&2 above.
I guess I read somewhere, that all the web applications can be deployed to either all windows or to all Linux OS servers? - Is it correct?

How to Configure Mighty Mouse in Windows 7?

How to Configure Mighty Mouse in Windows 7?
For example the 3rd and 4th Buttons on the Mighty Mouse.
How to configure those actions in Windows 7?

There is no need for additional drivers.
Why?
If you have a Wireless Mighty Mouse you have to turn your computer visible for other devices in the Bluetooth preferences - then simply search for Bluetooth devices, connect - done!
To configure the Mighty Mouse's buttons, you might want to have a look at a tool called X-Mouse Button Control (http://www.highrez.co.uk/downloads/XMouseButtonControl.htm).

I updated to itunes 11, uninstalled it according to directions, and re-installed itunes 10.7.021 for windows 64bit. Now Iget the message itunes library.itl cannot be read because it was created by an earlier version of itunes

I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Install oracle 10g (32bits) on windows (64bits)

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

Oracle 11G Express Windows 64bit Version

I've seen the thread that states that a Windows 64bit 11G Express version is planned. Can someone at Oracle please provide an update as to when it will be available? Thanks

Hi ,
There is a known issue with Dbcontrol when try accessing the URL via Internet Explorer
Can you check by accessing the Dbcontrol URL via a different browser like Firefox or Chrome
Ref
Log in to Enterprise Manager Console using Internet Explorer 7 and higher fails with "Internet Explorer cannot display this page" or with Security Certificate Error (Doc ID 1498203.1)
If still an issue then check the status of Dbcontrol to ensure its working fine
SET ORACLE_HOME=<value>
SET ORACLE_SID=ORCL
SET ORACLE_UNQNAME=ORCL
cd %ORACLE_HOME%/bin
emctl stop dbconsole
emctl start dbconsole
emctl status dbconsole
Regards,
Rahul

Failed to Configured Domain Services for Windows

Hi!
I am installing OES 2 SP3 with DSfW Pattern as a "New Domain Controller in an Existing Domain Services for Windows Domain" with Replication Configuration and Schema Partition.
During the "Perform eDirectory Configuration" at last task "Configure Domain Services for Windows " at 93% we encountered an error: "Failed to configure Domain Services for Windows".
Here's details of error ;
command : perl /opt/novell/xad/sbin/ndsdcinit.pl retry full-replica -d 'vec.apd.com.ph' -l 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'
-g 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph' -f 'apd.com.ph' -p 'apd.com.ph' -o 192.168.81.92 -t
Could not create gss directory /etc/opt/novell/xad/gss at /opt/novell/xad/sbin/ndsdcinit.pl line 463, line 652
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
SASL/GSS-SPNEGO authentication started
SASL SSF: 56
SASL installing layers
Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 503
at /opt/novell/xad/lib64/perl/Logger.pm line 119
Logger::_err('Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') called at /opt/novell/xad/lib64/perl/Logger.pm line 202
Logger::Log(0, 'Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 532
adc_install::decide_domain_zones() called at /opt/novell/xad/lib64/perl/install/adc_install.pm line 150
adc_install::stage_domain('adc_install=HASH (0X8b9370)') called at /opt/novell/xad/sbin/ndsdcinit.pl line 1383
main::main(62, 'apd.com.ph', 'vvec.apd.com.ph', 'TRUE','ou=OESSystemObjects,dc=vec,dc=apd,dc=com,d c=ph','ADM_PASSWD_DOMAIN','ou=OESSystemObjects,dc= vec,dc=apd,dc=com,dc=ph','replops::DESTROY',
'APD.COM.PH',...) called at /opt/novell/xad/sbin/ndsdcinit.pl line 1301
main::main() called at /opt/novell/xad/sbin/ndsdcinit.pl line 1425
ENV PATH = /opt/novell/xad/sbin:/opt/novell/xad/bin:/opt/novell/xad/share/dcinit:/opt/novell/eDirectory/bin:
LIB=lib64
LD LIBRARY PATH =
/opt/novell/xad/lib64:/opt/novell/xad/lib64/nds-
modules:/opt/novell/eDirectory/lib64:/opt/novell/eDirectory/lib64/nds-modules
SASL PATH = /opt/novell/xad/lib64/sasl2
DCINIT CONFIG: /etc/opt/novell/xad/xad.ini
DOMAIN NAME: vec.apd.com.ph
PARENT NAME: apd.com.ph
FOREST NAME: apd.com.ph
NETBIOS NAME: VEC
Any ideas on this error ?
Regards. Thanks.
denzmo

Thanks for the reply.
I have some followup questions
2. Can you explain the DNS setting in your setup ?
Tree ---> Power--> apd.com.ph -- dlpc.apd.com.ph
-- vec.apd.com.ph -- Andromeda.vec.apd.com.ph (DNS)
-- Pictor.vec.apd.com.ph ( additional domain server ) -> "Failed to configure in DSFW"
1. apd.com.ph, dlpc.apd.com.ph, vec.apd.com.ph are DSfW domains or just DNS domains ?
2. Andromeda.vec.apd.com.ph (DNS) - is this the DC of a DSfW domain ?
3. You are adding the Additional domain controller to the vec.apd.com.ph domain right ?
The
# LDAPCONF=/etc/opt/novell/xad/openldap/ldap.conf /usr/bin/ldapsearch -Y EXTERNAL -s sub -b dc=ph "(objectclass=dniplocator)" dn
Heres the result ;
a.) running the command in the DNS server (child domain) ANDROMEDA;
SASL /EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0, cn=peercred,cn=external,cn=auth
SASL SSF: 0
# extended LDIF
# LDAPv3
# base <dc=ph(objectclass=dniplocator) [email protected]> with scope subtree
# filter: (objectclass=*)
# requesting:ALL
# search result
search : 2
result : 32 No such object
text : NDS error : no such entry (-601)
# numResponses :1
This is strange. This ldapsearch is failing to find the locator object in the tree under dc=ph.
- Can you try this same command from your FRD DC too and find the result ?
- Is your server non-name mapped or your adding a DSfW server into an existing eDirectory tree (name mapped) ?
- If it is later can you try the same search with '-b' parameter replaced with container to which FRD is mapped to into the eDirectory Tree.
- Can you tell in your setup where are the locator object present for your first DSfW server which is acting as DNS server ?
- While installing this ADC server, you have given the remote dns server as 192.168.81.92. In the YaST DNS screen did you do retrieve (by clicking 'retrieve' button on the screen ) or you entered those inputs manually ?
- Another follow up question. The locator context provided to the ndsdcinit command in your first post, is 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'. Can you confirm your locator
context is correct ?
[/QUOTE]
b.) running the command in the ADC PICTOR;
SASL /EXTERNAL authentication started
ldap_sasl_interactive_bind_s: invalid credentials (49)
[/QUOTE]
This is expected as the server is not completely configured.
Please get it touch with our NTS for passing on more information about this setup.

Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot

Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot

Hello Taleh,
Wer're just other users here trying to help other users, you'll have to contact Apple, maybe calmly ask to speak to a Customer representative, & see if they can help you.
Good luck & wishes.

Error in configuring OC4J as a Windows Service

I created a batch file and placed it in my drive C. It has the following code:
SET PATH=C:\Program Files\Java\jdk1.6.0_01\bin
cd C:\OracleBI\oc4j_bi\j2ee\home
java -jar oc4j.jarWhen i double click on the batch file OC4J starts correctly. However, when i configure it as a windows service using the same batch file i get the error:
Error 1053: The service did not respond to start or control request in a timely fashion
I created a windows service are as follows:
sc.exe create "Oracle BI OC4J" binPath= "c:\Start_OC4J.bat"
Thats it. I did only this much. I feel i am missing out on some steps. I can see the service but not able to start it. The error is:
Error 1053: The service did not respond to start or control request in a timely fashion

Windows bit also matters and you need to use specific javaservice
Try something like below
Windows 64 BIT
Download "JavaService-2.0.7.64" from http://forge.ow2.org/project/download.php
javaservice -install "Oracle BI OC4J Service" "C:\Program Files\Java\jre6\bin\server\jvm.dll" -XX:MaxPermSize=128m -Xmx512m "-Djava.class.path=D:\OracleBI\oc4j_bi\j2ee\home\oc4j.jar" -start oracle.oc4j.loader.boot.BootStrap
Windows 32 BIT
Download "JavaService-2.0.10" from http://forge.ow2.org/project/download.php
javaservice -install "Oracle BI OC4J" "D:\Java\jre7\bin\client\jvm.dll" -XX:MaxPermSize=128m -Xmx512m "-Djava.class.path=D:\OracleBI\oc4j_bi\j2ee\home\oc4j.jar" -start oracle.oc4j.loader.boot.BootStrap -out "D:\OracleBI\oc4j_bi\j2ee\home\log\oc4j.log.txt" -err "D:\OracleBI\oc4j_bi\j2ee\home\log\oc4j.err.txt" -description "Oracle BI OC4J"
Edited by: Srini VEERAVALLI on May 20, 2013 9:13 AM

My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

It won't pass 10.3.
What does this mean?
I figured it out. Thanks!!!
What did you figure out? How about posting how you resolved it?

Configuring TCP Locators on Windows 64bit

Similar Messages

Maybe you are looking for