Configuring the POS in ECC w/o having any third party tool and SAP IS Retai

Hi All,
I would like to know whether is there any way of configuring the POS in ECC without having any third party tool and SAP IS Retail.
Becuse client can't efford to invest for the sake of small functionality like just sales and service at his compay owned outlets.
Hope the query is clear to you all.
Best regards,
sushil kumar

Hi Guru's
I am closing this thread due to no reply nor solutions from the forum
Thanks for your time
Regards,
sushil

Similar Messages

I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

I can't get Safari to load period. It quits immediately. According to the troubleshooting, I'm to un-install any third party plug ins. Can anyone tell me what I should be looking for? I don't recall installing anything that wasn't an upgrade.

Unplug your iBook from the AC power, shut it down and take the main battery out for about fifteen minutes. Then you can put the battery back in, plug the power back in and restart. This should reset the USB and FireWire ports.
If that doesn't help, you could reset the Power Management Unit. Follow the instructions in Knowledge Base Article #14449 for resetting your PMU.
You probably should also startup from your Mac OS X install disk and run the Disk Utility to "repair disk" on your hard drive. This will determine if you've got some kind of file directory/software problems with the files on your hard drive.
I'm not much at decoding kernel panic logs, but this line jumps out:
Kernel loadable modules in backtrace (with dependencies):
com.apple.filesystems.udf(1.4.1)@0x28a79000
Did you have a DVD movie in the drive at the time? DVD movie disks are UDF format, but not much else is.
-Doug

What are the stpes to configure third party tools in BW

Hi all,
can you please send me any documents on "what are the stpes to configure third party tools in BW"

Hi,
1> Define the RFC connection ;ex:-Define the IP address using SM59
2> Define the third pary sourcesystem
3>Assign it to infosources
4>Map and define transformation rules
5> Create Infopackage and load the data.
I hope it would help you.
Regard's
Prasad

How to burn DVD and can i burn the same DVD later if its having any space..

How to burn DVD and can i burn the same DVD later if its having any space..?

This is called sessions, but it is not recommended and has been largely abandoned by software developers. This was a good thing in the late 1990’s, when opticals discs were quite expensive, and file size quite low.
applications which reportedly may do this are
- isoBurn: http://www.macupdate.com/app/mac/40109/isoburn
- others, I do not remember which ones, try SimpyBurns, Burn, Dragon Burn and LiquidCD, you will find all in macupdate.com, test which ones suit you.
Otherwise, I do not recommend you such time consuming and inefficient solutions, optical drives are being replaces by more capacitive, cheaper and more practical solutions, like external disks. But, if you insist, you will find what you are looking for.

HT2589 i was given an ipod by a friend due to them buying a newer ipod. I want to transfer the music that is currently on the ipod to my itunes without having to sync my ipod and delete the music. Any suggestions?

i was given an ipod by a friend due to them buying a newer ipod. I want to transfer the music that is currently on the ipod to my itunes without having to sync my ipod and delete the music. Any suggestions?

Without even knowing if Apple's DRM would permit this, if you are in the U.S. then that's copyright infringement.

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro.

My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
Skip

I am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
   My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
   2014-11-13 QuickLookSatellite crash x2
   2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
   Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
   Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
   Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
   Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
   Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
   Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
   Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
   Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
   Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
   Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
   Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
   Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
   Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
   Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
   Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
   Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
   Dec 1 20:08:30 jnl: disk3s2: journal replay done.
   Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
   Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
   Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
   Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
   Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
   Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
   com.cisco.kext.acsock (1.1.0)
   com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
   com.cisco.anyconnect.vpnagentd
   com.oracle.java.JavaUpdateHelper
   com.apple.installer.osmessagetracing
   com.microsoft.office.licensing.helper
   com.google.keystone.daemon
   com.wdc.WDSmartWareService
   com.oracle.java.Helper-Tool
   com.adobe.fpsaud
   com.wdc.SmartwareDriveService
Agents
   com.adobe.AdobeCreativeCloud
   com.zimbra.desktop
   com.citrix.ServiceRecords
   com.google.keystone.system.agent
   com.apple.photostream-agent
   com.genieo.completer.download
   com.genieo.completer.update
   com.cisco.anyconnect.gui
   com.citrix.ReceiverHelper
   com.citrix.AuthManager_Mac
   com.citrix.FMDAgent.14800.UUID
   com.oracle.java.Java-Updater
   com.fiplab.MailTabProHelper
   com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
   com.citrixonline.GoToMeeting.G2MUpdate
   com.apple.AirPortBaseStationAgent
   com.microsoft.SyncServicesAgent
Startup items
   /System/Library/StartupItems/ciscod/ciscod
   /System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
   /System/Library/Extensions/hp_fax_io.kext
   - com.hp.kext.hp-fax-io
   /System/Library/Extensions/hp_Inkjet1_io_enabler.kext
   - com.hp.print.hpio.Inkjet1.kext
   /System/Library/Extensions/hp_Inkjet4_io_enabler.kext
   - com.hp.print.hpio.Inkjet4.kext
   /System/Library/Extensions/hp_Inkjet8_io_enabler.kext
   - com.hp.print.hpio.inkjet8.kext
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
   /System/Library/Extensions/WD1394_64_109HPDriver.kext
   - com.wdc.driver.1394.64.10.9
   /System/Library/Extensions/WDUSB_64_109HPDriver.kext
   - com.wdc.driver.USB.64.10.9
   /Library/Extensions/hp_io_printerclassdriver_enabler.kext
   - com.hp.hpio.hp-io-printerclassdriver-enabler
   /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
   - com.AdobeAAMDetectLib.AdobeAAMDetect
   /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
   - com.citrix.citrixicaclientplugIn
   /Library/Internet Plug-Ins/Flash Player.plugin
   - N/A
   /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
   - com.google.googletalkbrowserplugin
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
   - com.oracle.java.JavaAppletPlugin
   /Library/Internet Plug-Ins/npg.plugin
   - npg.graphon.com
   /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
   - com.google.o1dbrowserplugin
   /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
   - com.microsoft.sharepoint.browserplugin
   /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
   - com.microsoft.sharepoint.webkitplugin
   /Library/Internet Plug-Ins/Silverlight.plugin
   - com.microsoft.SilverlightPlugin
   /Library/Internet Plug-Ins/SlingPlayer.plugin
   - com.slingmedia.slingplayer.plugin.nspapi
   /Library/PreferencePanes/Flash Player.prefPane
   - com.adobe.flashplayerpreferences
   /Library/PreferencePanes/FMDSysPrefPane.prefPane
   - Citrix.FMDSysPrefPane
   /Library/PreferencePanes/JavaControlPanel.prefPane
   - com.oracle.java.JavaControlPanel
   /Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
   - com.westerndigital.quickview.prefpanel
   /Library/PreferencePanes/Zimbra.prefPane
   - com.zimbra.prefpanel
   /Library/ScriptingAdditions/Adobe Unit Types.osax
   - N/A
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
   - com.skype.skypeabdialer
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
   - com.skype.skypeabsms
   Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
   - com.citrixonline.mac.WebDeploymentPlugin
   Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
   - com.Google.GoogleEarthPlugin.plugin
   Library/Internet Plug-Ins/WebEx.plugin
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
   - com.webex.WebEx
   Library/Internet Plug-Ins/WebEx64.plugin
   - com.cisco_webex.plugin.gpc64
dylibs
   /usr/lib/libaudioc.dylib
   /usr/lib/libclipc.dylib
   /usr/lib/libcs.dylib
   /usr/lib/libdc.dylib
   /usr/lib/libfilec.dylib
   /usr/lib/libMonoPosixHelper.dylib
   /usr/lib/libpbr.dylib
   /usr/lib/libprintc.dylib
   /usr/lib/libsc.dylib
   /usr/lib/libSFFileMonitor.32.dylib
   /usr/lib/libSFIPC.32.dylib
   /usr/lib/libSFIPC.I.dylib
   /usr/lib/libSFsqlite3.7.4.dylib
   /usr/lib/libSFSyncEngine.I.dylib
   /usr/lib/libupc.dylib
App extensions
   it.bloop.airmail.beta10.Airmail-Today-Beta
   it.bloop.airmail.beta10.Airmail-Composer-Beta
   com.wunderkinder.wunderlistdesktop.sharingextension
   com.wunderkinder.wunderlistdesktop.todayextension
   com.readitlater.PocketMac.AddToPocketShareExtension
   com.stylemac.instadesk.Photodesk-Feed
   it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
   /Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/opt/cisco/anyconnect/gui_keepalive</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.cisco.anyconnect.gui</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
    <string>open</string>
    <string>--wait-apps</string>
    <string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
    </array>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.AuthManager_Mac</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.AuthManager_Mac</string>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.citrix.ReceiverHelper</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <false/>
    </dict>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.Beacons</key>
    <true/>
    <key>com.citrix.ServiceRecords</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.ServiceRecords</string>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <true/>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
    </array>
   ...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>9</integer>
    <key>Minute</key>
    <integer>57</integer>
    <key>Weekday</key>
    <integer>3</integer>
    </dict>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
   http://www.apple.com/DTDs/PropertyList-1.0.dtd >
   <plist version="1.0">
   <dict>
        <key>Label</key>
        <string>com.cisco.anyconnect.vpnagentd</string>
        <key>ProgramArguments</key>
        <array>
             <string>/opt/cisco/anyconnect/bin/vpnagentd</string>
             <string>-execv_instance</string>
        </array>
        <key>KeepAlive</key>
        <true/>
        <key>RunAtLoad</key>
        <true/>
        <key>AbandonProcessGroup</key>
        <true/>
        <key>EnableTransactions</key>
        <false/>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.SmartwareDriveService</string>
    <key>Program</key>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.wdc.WDSmartWareService</string>
   
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.download</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>download</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>WatchPaths</key>
    <array>
    <string>/Users/USER/Downloads</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.genieo.completer.update</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
    <string>-trigger</string>
    <string>update</string>
    <string>-isDev</string>
    <string>0</string>
    <string>-installVersion</string>
    <string>15886</string>
    <string>-firstAppId</string>
    <string>19340001</string>
    </array>
    <key>StartInterval</key>
    <integer>86400</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <false/>
    <key>Label</key>
    <string>com.microsoft.SyncServicesAgent</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
    </array>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
           <key>Label</key>
           <string>com.zimbra.desktop</string>
           <key>ProgramArguments</key>
           <array>
                   <string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
                   <string>start</string>
                   <string>-w</string>
           </array>

Does Resetting Internet Explorer Maintenance settings from GPO will also remove the proxy set in IE by a third party tool when the GPO refreshes for the first time

Hi,
We have two GPO's with IE maintenance (Preference Mode Configured)
The settings it has are
1. Automatically detect configuration settings - Set to Enabled.
2. Automatic Browser configuration - Not configured.
We do not have proxy value set in IE through this GPO.
We have proxy set in IE through a third party tool (TPT) which updates the proxy at logon event 5 and 10.
Does Resetting Internet Explorer Maintenance settings from these GPO's also clear proxy set in IE by third party tool after the first GPO refresh.
I am sure the second time when the GP refreshes, the client won't find any IEM settings and hence there is no question of the proxy set in IE by TPT to erase. It is only the first time of the GPO refresh that I am concerned about.
Can someone please guide as I am planning to do the same in our production and concerned about the downtime caused due to the proxy being removed if at all for the first time.

It will disable the proxy server option in Internet Options (untick the box), but will still store your proxy details.
Thanks
Ryan

Configuration of third party billing and intercompany billing

Hi,
can u give me details of Third party billing and intercompany billing with full details.

Process is u will get an order from the customer.U will not having the stocks in this case u will send the po to vender and ask vendor give the delivery to the customer and finally u will send the bill to the customer.
In Third party Item category plays major role.Third party Item catogery in TAS.
    In the material u have to the Item cat group as BANS and create the material.If u r using NORM then make assinment in VOV4 as follows
Saty ItcGrp Usg HLevItca Dfltc mltca
OR   NORM -        -           TAN TAS
So that u can change the iteam category and do the sales order and save.In VA02 u will get the PR in schdule lines with this u can do PO then vl10b,MIGO,MIRO then finally u have to do order related billing.
INTER COMPANY:
This is STO beteen company to compnay ( EX: 1000 & 1100)
In this u haveto create 1100 as customer in 1000 sales area and 1000 has to create as vendor in 1100.
Then go to IMG-MM-PURCHASING-PURCHASE ORDER-SET UP STOCK TRANSPORT ORDER In this 5 steps r there do this.IN the 1st step in 1000 plant u have to give ur sales area and in 1100 plant u have to give the customer.In the 2nd and 3rd step check whether the rules r available r not,because standerd will be available.In 4th step Assign Delivery Type and Checking Rule the document type is NB and delivery type is NLCC.In the 5th stepAssign Document Type, One-Step Procedure, Underdelivery Tolerance Suplying plan Receiveing plant Document Type has to assign.
    In vendor in puchasing data go to EXTRAS select ADD PURCHASING DATA in this give the suplying plant.And give the customer in CONTROL.
In this billing type is IV.For this u have to create pricing procedure.This will be available in IDEAS as ZIV--- copy from this and give the different name and assing to ur sales area.
Then do the rmaing process ME21N,VL10B,BIILING,MIGO,MIRO.
Regards
RV

Error while creating the proxy object to connect to a third party tool.

Hi,
I tried creating a proxy object with the wsdl file. I even created a HTTP connection to the third party tool. but when I try to execute the whole proxy object, I am getting the below error. Can anyone help me on this?
"Proxy-Generierung: Fehler aufgetreten"
"Incorrect value: Entity "<<document>>"(92 /3788 ). end tag 'ul' does not match begin tag 'p'"
Thanks & Regards,
Veerabhadra Rao A.

do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM

What are the third party tools available for Encryption in Oracle database?

Dear All,
Can you please help me with the below question?
What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
1. Operating system
2. Database edition and version
3. What type of data needs to be secured
4. What level of security is required

Who will do benefit enrollment? third party or In sap itself? who is the third party vendor?

who will do benefit enrollment? third party or In sap itself? who is the third party vendor?

Hi Rakesh,
Who should handle benefit enrollement depends on client requirement.
In SAP Benefit Administration module we do have enrollment function.
Here is the document
http://help.sap.com/saphelp_46c/helpdata/en/7e/8a5f51545711d1891c0000e8322f96/content.htm
Client may chose to only store benefit related information and take help of other third party vendor and use interfaces to communicate it to SAP for payroll and master data maintenance.
Aon Hewitt is one of the well known vendors. Might be more not sure of all names.
Hope it answers your question.
Regards,
Jignya

I want to know if ios 7 gives tv out support to third party apps and does it support viewing office documents in a tv through the tv out cable without any other software

I have an iphone 4s and i use it to display pictures,videos in a tv or a projector using the tv out cable, i want to see if ios 7 still support this feature and does it give this support to third party applications too. I does io7 need any third party applications to view microsoft office documents in a tv using cable??

It seems they deleted my post from discussions. Thanks.

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

TS3938 When I went to the Quicken site I was routed to a third party tech company that asked me to download a software that allowed them to access my computer for a remote session to fix my computer. Is that a scam? I did not do it but how do I get my Q

When I went to the Quicken site I was routed to a third party tech company that asked me to download a software that allowed them to access my computer for a remote session to fix my computer. Is that a scam? I did not do it but how do I get my Quicken 2007 to work with Mountain Lion?

old diane wrote:
When I went to the Quicken site I was routed to a third party tech company that asked me to download a software that allowed them to access my computer for a remote session to fix my computer. Is that a scam? I did not do it but how do I get my Quicken 2007 to work with Mountain Lion?
Ahhh, I see that you did not allow them to connect (is this true)
Here is a link to the Lion/Mountain Lion compatible version of Quicken.
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp

Problems with the ActiveX bridge for Java beans when using third-party .jar

I encountered the following problem when using the ActiveX bridge for a java bean:
I am using JDK 1.4.2_09 and MS Visual Basic 6.0 (SP6). I wrote a java bean called ProcessViewer (my class ProcessViewer inherits from JComponent and implements the interfaces Serializable and AdjustmentListener) which I would like to use within a VB 6.0 application. I used the ActiveX bridge (packager.exe) to generate a DLL (ProcessViewer.dll) and registered it successfully. The java bean GUI-control works fine within my VB 6.0 application unless my java bean (ProcessViewer.jar) uses any third-party .jar files.
But when I tried to add a reference to some third-party class (com.sap.xxx.xxx....) I got some problems. I could solve the problem with packager.exe by setting the correct CLASSPATH. But at runtime my VB 6.0 application does not work. It crashes or it reports an error like this: "The control ... could not be loaded from axbridge.dll" (although I deployed my .jar file correctly to the directory C:\Programme\Java\j2re1.4.2_09\axbridge\bin and lib). Setting the CLASSPATH environment variable before calling my VB 6.0 application (exe) did not solve the problem.
How can I teach my VB 6.0 application (containing the Java bean ActiveX control) where to find the third-party .jar file? Copying the third-party .jar file to the JRE lib-folder or to the axbridge\lib folder did not solve the problem either.
I studied the documentation about the ActiveX bridge given at:
http://java.sun.com/j2se/1.4.2/docs/guide/beans/axbridge/developerguide/index.html
but I am missing informations on how the third-party .jar files can be found during runtime of the ActiveX container (e. g. a VB 6.0 application).

See how to solve your problem with JNI:
http://codeproject.com/cpp/OOJNIUse.asp
More examples (for SWING) in tools setup:
http://www.simtel.net/product.php[id]95126[SiteID]simtel.net
http://www.simtel.net/product.php[id]94368[SiteID]simtel.net
http://www.simtel.net/product.php[id]93174[SiteID]simtel.net

Configuring the POS in ECC w/o having any third party tool and SAP IS Retai

Similar Messages

Maybe you are looking for