Configuring the screen layout of C5-00

I would like to remove almost all items from the main screen lay out:
- add contacts
- calendar entries
- set up email
also the horizontal list menu on the bottom of the screen with items. camera, messages, clock, maps, chat and ovi  is unnecessary for me.
I have not found how to change  the screen layout or remove the items I want.  Hope there is a solution to this problem too. A New phone?
Solved!
Go to Solution.

Thank you both: I finally got the better screen...
selected the basic homesreen theme
settings-- settings... standby --standby...

Similar Messages

  • Can we change the look and feel of the screen layout

    Dear All,
    I am new to ABAP WebDynpro, and would like to know the following with respect to ABAP WebDynpro :
    1. To what extent can we change the look and feel of the screen layout ?
    2. Is it possible to change the background color of the layout?
    3. Is it possible to change the color of, Buttons etc ?
    Any information / document/ link to explain this would be very helpful ..
    Thanks in advance,
    Aditi

    Hi,
    Psl check out these links.
    check out these webdynpro standard components in SE80 tcode -
    WDR_TEST_UI_ELEMENTS
    check out this link on webdynpro for ABAP-
    http://help.sap.com/saphelp_nw70/helpdata/EN/03/0048413e466e24e10000000a155106/frameset.htm-WD for ABAP
    http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm -UI elements
    http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm-Button Properties
    http://help.sap.com/saphelp_nw70/helpdata/EN/46/9319f88f8115ebe10000000a114a6b/frameset.htm- For different Layouts
    Regards
    Lekha

  • How to creat a select-options in the screen layout of se80.

    Because in se80 ,the screen is drawed in the screen layout,but it just have text-field for parameter.
    Thanks!

    In your main program, you can declare your desired select-option. Do your select-option declaration before calling your dialog screen.
    Create a subscreen in your screen's flow logic (PBO & PAI) that contains your selection screen with its corresponding screen number of your declared subscreen.
    sample code of select-option declaration below.
    SELECTION-SCREEN BEGIN OF SCREEN 5003 AS SUBSCREEN.
    SELECTION-SCREEN BEGIN OF BLOCK PARAM.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT (18) TEXT-ABK FOR FIELD S_ABKRS.
    SELECT-OPTIONS: S_ABKRS FOR PA0001-ABKRS.
    SELECTION-SCREEN POSITION 47.
    PARAMETER: P_ATEXT LIKE T549T-ATEXT VISIBLE LENGTH 30.
    SELECTION-SCREEN POSITION 70.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK PARAM.
    SELECTION-SCREEN END OF SCREEN 5003.
    call screen 5000.
    Sample Flow logic Code below of screen 5000:
    *--- PBO
    PROCESS BEFORE OUTPUT.
      CALL SUBSCREEN SUB_5003 INCLUDING SY-REPID '5003'. " subscreen 5003
      MODULE STATUS_5000.
      LOOP AT GT_MBBH INTO GS_MBBH WITH CONTROL TC_MBILL
                    CURSOR TC_MBILL-TOP_LINE.
      ENDLOOP.
    *--- PAI
    PROCESS AFTER INPUT.
      LOOP AT GT_MBBH.
        FIELD GS_MBBH-SELEC MODULE TC_TABLE_MARK ON REQUEST.
      ENDLOOP.
      MODULE USER_COMMAND_5000.
      CALL SUBSCREEN SUB_5003.  " subscreen 5003
    Hope this will help..

  • Default the screen layout in T.code FBL1N

    Can anyone help me with defaulting the screen layout for FBL1N.  When I give the t.code FBL1N i should see the default layout populated.
    Pls let me know the settings to be done.
    Vinay

    hi Vinay,
    each user can set for her/himself in FB00.
    ec

  • Problem with the browse sequence back and browse sequence next widget placed in the screen layout

    Hi,
    Some basics: We are using Robohelp 10 to  generate multiscreen  html5 output. We used the pharmaceutical  screen layout downloaded from:  http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
    We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
    Also
    This shows up in the  layout.css file:
    a.wBSBackButton {
                    margin: 0 8pt 0 0;
                    padding: 0;
                    background-color: transparent;
    img.wBSBackButton {
                    border: none;
    a.wBSNextButton {
                    margin: 0 8pt 0 0;
                    padding: 0;
                    background-color: transparent;
    img.wBSNextButton {
                    border: none;
    Also btw, I forgot to mention that we are linking our FrameMaker files.
    Appreciate the help.
    Thanks!

    hi pradeep
    It does not happen but if you Wait for a while that may be solved

  • Make pop-up appear as the topic only (i.e, w/o the screen layout)

    Hello All,
    I'd like to use pop-ups in my current project but I'd like for the pop-ups to appear as the topic only without the corresponding screen layout (side bar, contents, index, glossary, etc.).  I'm generating in Multiscreen_HTML5. When I preview my pages in a browser (CTRL+W) the pop-ups look just fine but when I Save/Generate, the screen layout is, as you would expect,  applied to the entire project (including the pop-ups). I am currently setting the pop-ups to auto size.
    If there were some way to exclude a topic from the screen layout then I could create separate topics for the pop-ups.
    thank you,
    -d

    Figured it out.
    I needed to deselect Convert auto-sizing and custom-sized popups to hyperlinks (Multiscreen_HTML5 Settings, Screen Profiles, Desktop, Optimization). Now the pop-ups appear as I had envisioned (auto sized without the screen layout).

  • In MM03, can you configure the display layout of the "document data" tab?

    In MM03 on the document data tab, we would like to shorten the length of the "document" column so that the Status field can be viewed on initial screen without scrolling to the right.  Is it possible to reconfigure this view?

    Hi Heidi,
    to change the layout of the linked documents in transaction MM03 please go to the additional data tab and then please use the small configurations button (small table icon on the right side) and follow the below instructions:
    1.  Configure the table control as you want it.
    2. Click the settings button at the top of the table control.
    3. Enter a name and chhose "Create".
    4. If you want this variant to appear whenever the table control appears, set the "Use as default setting" option.
    5. Choose "Copy" to close the dialog box.
    If you want to change how existing variants are used, or want to reactivate the basic setting, choose the corresponding settings from the list boxes and choose 'Copy' to close the dialog box.
    Best regards,
    Christoph
    P.S.: Please reward points for useful information.

  • How do you Configure the "Screen Body" of the GUI to Display a Web Page?

    From the first screen in the GUI, I'd like to pull in a live web page to fill the right side of the screen (where the big SAP data graphic sits, next to the left hand navigation).  How is this done?  I've seen the University of Nebraska's GUI and they successfully pull in the front page of their SAP Support Site.  We'd like to do the same.
    Again, we simply want to have that frame of the GUI in teh Screen Body section to display a web page pointed at an absolute URL. Advice?
    Thank you!
    Lee Dudley
    Multnomah County, Oregon

    Hi lee,
    this link should be helpful
    [http://www.synactive.com/tutor_e/lessonv01.html]

  • When making a new playlist, the screen layout has changed, the playlist header is now on the left instead of the right, this does not allow me to drag the songs onto the playlist, how do I reset?

    When Making a new play list, the play list was on the right of the screen and this allowed you to drag your music onto the playlist, my setup has changed to the left of the screen which does not allow you to drag your music across, how do I reset?

    In the top corner of iTunes is a small icon with a down arrow, click on that and choose 'show menu bar'. 
    Then on the view menu which now appears choose 'show sidebar'

  • MR21 - Is there configuration for the screen layout?

    We want to make the Reference and Document Header Text fields in MR21 mandatory.  Is there anywhere in configuration that this can be accomplished?  We've looked everywhere...

    Hi Debbie
    Transaction OMW9
    Document Type - Double click on desire transaction code to check the document type
    eg for MR21it should be PR
    Transaction OBF4
    select document type: double click and check teh box for "required during document entry"
    REFERENCE NUMBER
    DOCUMENT HEADER
    With this config your requirement should be met
    Regards
    Vikrant

  • Screen layout for Special G/L indicator

    Hi everyone!
    I would like to know if you create a new special g/l indicator, you can change the screen layout that the system gives you. I need to create some which can have a screen layout similar to the one used in 01 key account.
    Thanks in advanced,
    Olga

    Hi Santosh,
    I´m going to give you some examples about what I want to do. First, I would like to used the special G/L indicator H security deposit which is configurated like as others special G/L transaction types. When I post with this Special G/L indicator the system shows me some fields in the accounting screen layout such as "Due on", "Invoice reference", "Assignment", etc. I would like to change this screen layout because I need fields like "Payment terms", "Payment block indicator", etc. What I did was to change field group status of the reconcilation account that this special G/L indicator has, and key accounting configuration that this special G/L indicator uses. It doesn't work because I make these fields optional and the system didn´t show me those.
    Other I need to do It's make new special G/L indicators because I need to post with a different reconciliation account and I need to configurated the screen layout with fields such us Payment terms, Payment blick indicator, etc. I mean I need to create my own screen layout.
    I don´t know if this gives you more details about what I want to do.
    Thanks so much.
    Best regards, Olga

  • Screen Layout Field in the Asset Master Record

    What is the use of the screen in the asset master record, ANLA-FELEI?
    We have some assets where there are different values between this screen layout and the screen layout defined at the asset class (i.e. through configuration).
    It seems the one defined within the asset class takes precedence.

    HI
    Scree Layout controls the diplay of fields, it may not be necessary for a user to use all the fileds provided by SAP. Hence the options like Required, Optional and Suppress are used to control the screen diplay and the TABs to be displayed based on the need.
    Asses within the same class will have same fields since the screen layout are assigned to an Asset class.
    Scree layout for the Tab Depreciation Area can also be controlled with the screen layout defied for the Depreciation Area.  With this one can have different screen layouts per dep. area.
    Hope i'm clear to  you.
    Thanks,
    Vijay

  • How to make use of the 'Groups' in Screen Layout?

    Hi All,
    I have a screen with 10 input fields (F1, F2, .. F10).
    I set the 'Groups' attribute in the screen layout to 'DIS'.
    How could I make use of this 'Groups' attribute so that when I loop the screen, I will only disable fields with the 'Groups' attribute set to 'DIS'? Thanks
    I tried the following codes, but it's not working:
      LOOP AT SCREEN.
        IF SCREEN-GROUPS IS NOT 'DIS'.
          SCREEN-INPUT = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    It says ==> The data object 'SCREEN' does not have a component called 'GROUPS'.

    In the Attributes of a screen field, there is an attribute called "Groups". This has 4 options for input (4 text boxes)
    SCREEN has 4 fields GROUP1, GROUP2, GROUP3 and GROUP4.
    The first text box under Groups attribute corresponds to SCREEN-GROUP1,
    2nd text box for SCREEN-GROUP2
    3rd text box for SCREEN-GROUP3
    4th text box for SCREEN-GROUP4
    Hope this helps.
    Thanks,
    Balaji

  • Screen layout for the asset class

    Hi,
    I know the name of the screen layout used for a particular asset class, now in that screen layout I want to see which fields are mandatory and which are not. Where can I see that?
    Please help .
    Many Thanks

    Hi,
    If you want to see the fields in screen layout go to spro - Asset accounting - Master data - screen layout - Define Screen Layout for Asset Master Data - click on Define Screen Layout for Asset Master Data
    there you will find the fields which are mandatory / optional
    Kedar

  • Group Asset Screen Layout  disabled fields

    Hi All,
    We have created asset masters with Book and Tax depreciation, For tax depreciation we are assigning Group asset. Issue is while doing take over value with t- Code AS92,  system should  propose the field of APC Value and Accumulated Depreciation Value but  both the fields are  proposing only for Book Depreciation
    In case of  tax depreciation APC value is editable and Accumulated Dep value is disabled,  requirement is we need to enter both the values for tax dep along with group asset assignment.
    This is happening only when we are assigning group asset while creation of asset master. if you donu2019t assign group asset to the asset master then system is allowing us to enter both values in both the depreciation area.
    I have checked necessary configuration regarding screen layout and not found any solution.
    Kindly help in this regard.
    Regards,
    Sahil K

    Hi:
           Please check for missing authorization if any in Transaction code ANSICHT. Have you checked group layout in AOLA..
           Regards

Maybe you are looking for