Configuring time capsule credit card reader

VISA asked us to configure our router (Time Capsule ) this way: If you have a firewall, open those outbound TCP ports: "list of ports".
How can we achieve this?
Thank you for your help.
Indy

There is plenty of threads showing this but there is a help document from one of the guru's here.
See https://discussions.apple.com/community/wireless/airport?view=documents
The documents on port mapping.
One for v6 utility and one for v5 utility.
All you need to do is put in the TCP port..
ie description creditcardreader.
Put in the external TCP you need.. generally port 80 but whatever you are told.. (that is public)
THen at the bottom the private port.. the exact same number.. (that is private).

Similar Messages

How to configure Time Capsule for Automatic Backup AND HARD DRIVE USE

I tried to configure Time Capsule for back up and as a hard drive. I record music and need to copy the music myself onto an external hard drive for speed, so I want the TC to double as an external hard drive, and do the back up. I want to be able to open the TC as a hard drive, to open my songs from it. Can it do both?

I finally figured it out. I am able to access my TC from the "shared folder." When I click on it, I get the "connection failed message." I failed to notice the login button in the upper right -- user error due to my Windows based education. The button is very subtle. Once I login, I can create folders and add content.
I didn't see a partition option. Where is that? Just curious.
Thanks!

Can't configure time capsule to extend my network

hi i tried many times to configure time capsule to extend my network everytime it doesn't work
airport utility cant find time capsule and i have to reset it everytime
my wireless network details are i
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
IPv4 Addresses: 10.0.50.
IPv4:
Addresses: 10.0.50.
Configuration Method: Manual
Interface Name: en1
NetworkSignature: IPv4.Router=10.0.50.1;IPv4.RouterHardwareAddress=00:90:4c:91:00:01
Router: 10.0.50.1
Subnet Masks: 255.255.255.0
IPv6:
Configuration Method: Automatic
DNS:
Search Domains:
Server Addresses: 196.1.69.98, 196.1.69.100

Are you running 7.3.1, when I did what you were trying everytime I turned on the wireless encryption it could no longer find the time capsule when I rebooted the time capsule. It worked fine once I left it long enough that it found the fact that the Time Capsule had an upgrade to 7.3.1
Once I got the upgrade in the Time Capsule, the system worked fine.

Izettle credit card reader smart connect app failure

Hi,
I own a Xperia Z1Compact Android version 4.4.4 with the integrated SmartConnect software and a pin&signature iZettle credit card reader.
I see why it is not compatible with such device... the SmartConnect app will interfere the operation of the iZettle during the chiping process by requesting to assign an app to be launched by the "app button" which happens not to be there, but being the signal of the izettle working...
I undestand that iZettle may have no time to develop such workarounds for any smartphone on the market, but it would be really helpful if you could provide some sort of guidance so independent developers can make it work for you. I am not a developer, just a user with some understanding.
Since disabling SmartConnect app will result in the izettle reader not being recognized -as I found out already- I can think of two possible solutions:
- An extension for Xperia devices that allows to assign the "app button" of a headset to point and launch the chiping process on the izettle, so it work with SmartConnect by assigning that extension app.
- An app that enables to use the port normally while disabling the SmartConnect feature.
We all Xperia users will be very glad to know that izettle is now compatible with our devices.
PLEASE SONY, FIX SMART CONNECT APP TO ACCEPT IZETTLE READERS!!!!
Best Regards!!!

You should contact Izelttle directly
https://www.izettle.com/se/press/releases/55506389299/izettle-goes-android
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Is There A Credit Card Reader For OS10?

Hi,
I just got a Q10 and I can't seem to find a credit card reader for the device.
I've run searches on google and almost all of the readers that I've found listed either no longer support BB or they don't support OS10.
Any help would be appreciated or I have to move to an iPhone.
Thanks!
Good Is The Enemy Of Great
A Custom Electric

Hi,
Thank you for your response.
I'm looking for a merchant service company that provides a credit card swiper for my recently purchased Q10.
My present merchant service company no longer supports BB and google search only turned up one company that supports BB and that company has very bad reviews.
Thank you again for your time.
Good Is The Enemy Of Great
A Custom Electric

How to configure time capsule backup with windows7 ?

I cannot configure time capsule to do the backup of my PC. I am using windows7 with SP1
xepa

Does the windows computer have access to the TC hard disk?
If so use a backup software that can backup to network drive.. MSbackup in the home versions cannot. You need to use third party.

HT1178 How setup and configure time capsule with ADSL modem for WiFi internet

For my first time time capsule 2TB set up,would like to know about configuration time capsule with ADSL modem for use WiFi internet!

You will want to turn off the WiFi on your modem (if there is WiFi on your modem). Connect the TC and the modem together with an Ethernet cable. Then, turn on your TC and set it up to be in bridged mode, connection type 'Ethernet'.

Looking for an app for a credit card reader

Looking for an app to use a credit card reader such as the square register for the Z10. Or any ohter credit card reader.
I've been a faithful Blackberry user for over 6 years, I hope that I don't regret buying this new phone last June. Verizon tried to talk me out of buying a Blackberry. So far I have been dis-appointed in this phone.

Hey guys get ducks in order, I'm a small business owner, I need smooth native apps or built in's that help make money for me, your voice recognition is terrible at best for my Z10, especially when my job relies heavily on making hands free calls to clients, my old 9900 worked well when you had to say numerous commands to adapt to your voice or am I not seeing that this phone does this as well, if so why do I have find it!? As well, I like others are faithful early adapters to BlackBerry, but now, getting impatient as a other devices and OS's are becoming more appealing.
The new Square Card reader is a very good example that you should be working with them aggressively, this simplifying product is excellent for small businesses who provide mobile services, it will explode into adaptation for this sector, do not suggest an android app for use, otherwise I'll make it simpler and just get the android device instead, this solution benefits blackberry how? And if I am the rare one with this sentiment I apologize, but if I representative of a population that matters take it seriously...what do you do with this information? Remember when you start to get a bitter taste, you tend to never again, does blackberry care, show me, do not tell me!
PS/ if you get where the future is going most business are going to move to 2 devices for employees and owner operators that have partial integration, and the only thing that keeps you BlackBerry afloat is the "sense" of security is use, the second device will be for social and leisure...think about it.

Lumia 822 credit card reader

Is there a credit card reader that will work with my lumia 822

Take a look at Point of Sale and Retail Payments - Cube

Time capsule sparse bundle reading "temporarily unavailable" and Time Machine files are not in order; what can I do to check on my backup systems?

I have my time machine set-up with my time capsule/airport. I cannot open my backups in the time capsule as it reads "spars bundle temporarily unavailable." Also, my time machine backup files are missing some files and not in oder by name as designed. It seems something is is not working. I have don a disk repair on the time capsule. I have closed and reopened my computer. Still unable to open time capsule. Does anyone know where else I need to check for errors?

There are two key but related bugs in Yosemite..
The big one IMHO at least is the network one.. and the secondary one is TM which is itself unreliable.
To fix the Network ones we have a long list of things to do.. but you do apparently have access to the TC so for now that is not the major one.
However some of your statements mean I am a bit lost on what you have done.
I cannot open my backups in the time capsule as it reads "spars bundle temporarily unavailable."
If you cannot open your backups how can you find that the backup files are missing. The files are missing from the sparsebundle which you cannot open??
my time machine backup files are missing some files
You cannot repair the disk of the Time Capsule.. only the Sparsebundle can be checked.. that means that you have accessed it and mounted it for disk utility to check it.
I have don a disk repair on the time capsule.
So I am confused about the comments.
What I would recommend is the standard set of fixes to Yosemite.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
That is all to cover the network side of things.
Time Machine issue is a harder one because there is no simple work around I can give you.
My recommendations are to stop using a TC and test TM to an external hard disk plugged into the computer.. Do a whole new backup and see if that is fully working and accessible.
Or change over to third party program for backup.. I do recommend Carbon Copy Cloner as I use it personally but SuperDuper has a good reputation and there are others. It is far easier and quicker to test a bootable clone made with CCC as you simply boot from the backup.

Credit card reader jack for iphone 4s

Need a jack for the iphone 4s for credit card reader from inuit with taking the otter box off please help.

You might try the otterbox forum. You are looking for a very short Male to Female miniplug extender.
Shortest one I found: http://www.mcmelectronics.com/product/DISTRIBUTED-BY-MCM-27-320-/27-320
Message was edited by: deggie

Is the A2109 compatible with square credit card reader?

I need to purchase an android tablet to accept square.
Is the A2109 compatible with square credit card reader?
Thanks

Wow, didn't know such a thing existed...
FloRider

How do I configure Time Capsule to recognize my Denon receiver?

Hi all,
New to the forums but have spent the past few days perusing them to no avail - your help is appreciated from a networking newbie!
I have a Denon AVR 2312ci which I'd previously had hard-wired to an old Belkin router. The only hiccup I'd had at the time was the requirement that I disable UPnP. I have an Apple TV that I use to stream music via airplay to the receiver, which works quite well. However, it requires me to turn on the receiver, whereas directing airplay to the receiver itself would "wake on LAN", a feature I like.
Since then, I've upgraded to a 2TB Time Capsule. However, following the router change I am no longer able to find the Denon on my home network, nor do any of the networking capabilities of the receiver work any longer. I tried disabling DHCP on the Denon and assigning a static IP address, but this didn't work. I tested multiple Cat5e cables using various LAN ports on the router - no luck there, either. I tried to reset the network card on the Denon - same result.
I'm beginning to wonder whether the problem lies with the way the Time Capsule is configured - any thoughts or suggestions out there?

LP,
IT WORKS!
To summarize for anyone who might have this problem, here's what fixed it:
1) Time Capsule --Cat5e--> LAN port of router/switch (in my case, an old Netgear 10/100 with DHCP and NAT disabled) --Cat5e--> Denon receiver
2) Through Airport Utility, made an IP reservation for an IP outside of the DHCP range (in my case 10.0.1.2 through 10.0.1.200, so I chose 10.0.1.202). You will need your AV receiver's MAC address to do this.
3) Disabled DHCP on the Denon
4) Manually entered the IP address (e.g. 10.0.1.202), subnet mask 255.255.255.0, default gateway 10.0.1.1 (e.g. the TC's local IP), primary DNS 8.8.8.8, secondary DNS left blank, proxy off
This worked after I left the unit on standby for a period of a few hours (did not immediately work). I did not need to do any port forwarding, DMZ, etc.
I am now able to access the unit from my web browser in my local network and am able to airplay directly to the unit using my other airplay enabled apps/iTunes.
Much thanks to LaPastenague for his very helpful advice!!
KS

Is it possible to configure Time Capsule to work with Time Machine (MBP) and Genie Timeline (PC)

I have an Apple Time Capsule (2TB) and I need to configure it to work with my MBP and Time Machine and also back up my a PC with Genie Timeline Pro 2013 (or any other suggested PC back up software).
Setting it up to work with Time Machine is simple enough but the PC access is proving to be difficult.
http://www.genie9.com/support/KB/KnowledgeArticle.aspx?KBID=198
I followed the above steps but still can't connect to the network drive. I have reformatted the TC and will be walking through the steps again. My concern is that the two different operating systems (Win8 and Mavericks) can't share the same destination drive.
I have created two user accounts with drive sharing activated. One in my name for my MBP and the other in the name of my partner for her Dell laptop.
Should the Time Capsule be partitioned? Can it even be partitioned? When I use Drive Utility it can't see the TC. The only way to connect to it seems to be via Airport Utility.
On a seperate note the TC Router Mode is set to OFF (Bridge Mode). I have connected it to the ADSL modem/router (WiFi Off) via the WAN port. All seems to be well. Am I loosing any useful functionality by doing this?
The internet settings are set Connect Using DHCP. I have no issues but I am not really sure what it means and if I should be using other settings. The ADSL modem/router seems to have all the PPP0E settings.
The WiFi on the TC has been set up with a 5Ghz and 2.4Ghz network as well as a Guest Network. I then plan to introduce 2 Airport Express (MB321LL/A). One will be an access point for AirPlay and the other a wireless extender with AirPlay.
There is also a Canon WiFi printer that accesses the 2.4Ghz network. It has an Ethanet port so I am wondering if I should disable the wifi connection and cable it and if so to the TC or the DSL modem/router.

Lion, 7.6.1 firmware and iCloud offers remote access.
http://www.apple.com/au/support/icloud/back-to-my-mac/
To do it without the iCloud service your issue is static public IP address.. if you have one this is simple to the point of trivial. If not it is very hard, as Apple did not put in a standard dynamic DNS service.. (ensuring you were roped into their cloud accounts). Static IP from your ISP is the best solution.. if it is possible go for it.
Then the actual protocol for access is AFP, so the only device you can do this on is a Mac.
Do you have the TC as the main router?
If you want any other kind of access, or to avoid icloud use vpn.. which teamviewer is a kind of.. but buy a real vpn router, and bridge the TC.. you can then vpn into your network with full security and get windows access via smb..

How do I configure Time Capsule to work with 8 port unmanaged switch?

This is what I want to end up with.
cable modem
Time Capsule
wireless network 8 port unmanaged switch TRENDnet TEGS80G
entertainment center(TV, xbox 360, dvd, apple tv, ect...)
I have been using the above setup with an E3000 router in place of the time capsule without any problems, and was expecting to just be able to switch out the E3000 for the time capsule and keep right on rolling. At the moment, without the switch plugged in, using the time capsule as a stand alone wireless router, everything works as intended. However, I don't want to have every device in the house pulling off of wireless. Whenever I plug my switch in I lose internet connectivity. I assume this is because both the switch and the Time Capsule are trying to direct traffic and creating a conflict. I have attempted to disable the NAT in the Airport Utility and this is what happens.
Where do I go from here, or am I heading in completely the wrong direction?

Unfortunately, you are on the wrong track, heading in the wrong direction at the moment.
We need to learn whether you have a simple modem or a modem/router.
This will determine whether the Time Capsule is to be configured in router mode to provide DHCP and NAT services for the network......or if your "modem" is already doing this.....the Time Capsule needs to be configured in Bridge Mode.
So, I suggest that you disconnect the switch from the Time Capsule for now, and power everything off except the modem, Time Capsule and the computer you are using to configure the Time Capsule, and get things working correctly first. Then, devices can be added one at a time to verify proper operation.
If this seems to make sense to you, and you want to move forward, please post back with the make and model number of your cable modem.

Configuring time capsule credit card reader

Similar Messages

Maybe you are looking for