Configuring Time capsule to existing network

Existing network consists of Cisco DPC3825 modem (shaw network with a static IP (this is a home based office)) and a Cisco Linksys EA3500 router. I need to keep the existing router as i have several custom routing tables for VOIP and SIP related connectivity to my Zultys Phone System. I need to find a configuration that will allow me to use the time capsule for backups for my Mac OS (latest release with a new Macbook Pro) and have my 3TB external drive accessable for the WIndows Partiton and other PC's on network.
I tried just plugging the Capsule into the network, but it would never clear the flashing amber 'problem' indicator.
Suggestions please.

This is pretty simple.. setup the TC in bridge mode before you plug it into the network..
Decide how you will run wireless.. you can turn it off and just use the existing wireless or you can setup the TC to have a separate network.. but as the router is bridged it will function merely as a different AP to the same network.
Bridge is under network in the v6 utility.. change from nat+dhcp to off, bridge mode.

Similar Messages

How do I add time capsule to existing network?

How do I add time capsule to existing network?

Ok.. I am still confused as an Express only has one ethernet for LAN not 4. So you perhaps have an extreme..
If you have an airport extreme.. plug the TC into the extreme with ethernet.. and set it up as bridge in router.
You can also create a wireless network that works alongside the extreme.. this is the best way.
It is also possible to setup the TC to extend the wireless of the extreme.. but this will make backups much slower.. at least half the speed if not worse.

Add a 4th génération time capsule to existing network

I have a regular router at home (in the basement) i would like to add a time capsule to my network at the 1st floor of my house to have more wifi power at the 2nd floor or outside an be able to configure time machine for my macbook air... Can I have both router on my network?

The Time Capsule can be installed virtually anywhere you want at your house if you connect an Ethernet cable from one of the LAN <-> ports on your basement router to the WAN "O" port of the Time Capsule.
Then configure the Time Capsule to create a wireless network using the same wireless network name, same security settings and same password as the basement router.
Finally, as the last step, make sure that the Time Capsule has been configured to operate in Bridge Mode to allow it to function correctly on the network.

Using Time Capsule with existing network?

I am planning on purchasing a Time Capsule, but would like to know if it's right for me before I buy it. Can someone please answer these questions I have about it;
What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
Can iOS access the files or back up to the Time Capsule?
If I connected a printer to the Time Capsule, can iOS devices use it to print?
I know there's a lot of questions, but I'd appreciate any help with any of the questions.
Thanks.

What security do I have available on the Time Capsule to stop other people on the network accessing my backup, any attached devices and the settings of the Time Capsule?
There is a device password that will be required of any user who wants to access the Time Capsule disk. If the Time Capsule is also configured to provide a wireless network, users will need to enter the wireless network password to be able to connect to the network.
If I plugged my Time Capsule into a network switch (switch is connected to the main router), will I then be able to attach ethernet devices to the Time Capsule without any speed loss for those devices?
In this case, the Time Capsue would be configured to operate in Bridge Mode. It functions as another Ethernet switch in that type of setup. Speed should not be affected.
I already have wifi but I would like to set up the Time Capsule with a different name and password (and leave the current wifi alone). If someone connected to the Time Capsule, can they access the devices which are connected to the original wifi, and the ones connected to the main router by ethernet?
Yes, since the Time Capsule will be in Bridge Mode, devices that connect through the wireless on the Time Capsule will be on the same network as your main router...users connecting through the wireless on the Time Capsule and will be able to "see" other network devices.
Can I easily create a partition on my Time Capsule, so I can have 100GB of space available for copying/sharing files directly and then the rest for Time Machine backups?
No. In order to partition the Time Capsule drive, it would need to be removed from the Time Capsule case, placed in a separate caddy or enclosure and then connected directly to your Mac to allow Disk Utility access to the disk for the partition procedure. Then, you would have to reinstall the Time Capsule drive back in the Time Capsule case.
In addition to a lot of work, this will void the warranty on the product.
Can iOS access the files or back up to the Time Capsule?
iOS devices back up to iTunes on your computer. Then, when a Mac backs up to the Time Capsule using Time Machine, all of the data is backed up. In other words, iOS devices cannot back up directly to the Time Capsule drive using Time Machine.
Using an App like Filebrowser, it is possible to have the iOS device browse the contents of the Time Capsule drive, but the iOS device will not be able to open files that have been backed up using Time Machine.
The iOS device will likely open most other normal files stored on the Time Capsule drive if the proper App is installed on the iOS device.
If I connected a printer to the Time Capsule, can iOS devices use it to print?
Yes if the printer is AirPrint compatible. Check this Apple support document to see if your printer is on the list of compatible devices.
http://support.apple.com/kb/HT4356
Otherwise, you can add an App like Print Central to the iOS device to possibly allow printing from the iOS devices.

Pb to associate time capsule to existing network

Hello just bought a Time Capsule and tried to configure it by connecting it to existing network (freebox revolution v6).
Final aim is to use it as a wifi drive not connected to the freebox by ethernet.
I tried it several times : each time it failed. I even tried to change WEP codes to WPA, password length etc ... Failed.
If i configure it by creating a new network ok it works, but i want to use it not linked by ethernet to the box.
Don't know what to do, and start to regret this expense.
Please help

The Time Capsule is not designed to connect wirelessly, unless you are connecting it to another Apple router.
Even then, this is not recommended since backups will take twice as long as normal this way, due to a "double hop" that the signal must make during the backup process.
Backups will be much faster and more reliable if you connect the Time Capsule using an Ethernet connection.

How to set up time capsule with existing network that uses airport express/extreme

I have an existing wirelss network using airport express. I want to upgrade to time capsule and use the A/P express upstairs. I dont want to delete the existing network.

I suggest to use your airport express to extend your wireless network that is created by your new time capsule

New Time Capsule on Existing Network

I just got a 1TB Time Capsule that I've connected to an existing Network on an Airport Extreme. My existing Time Machine backups are on a LaCie Firewire external drive. Is there a way to get my existing backups from the Firewire drive to the new Time Capsule, then continue to do incremental backups? Or do I have to start over with Time Capsule, and save old backups on the LaCie? When I try to drag the backup file to the Time Capsule in Finder, I get an error message.

not compatible and read this article.
http://www.appleinsider.com/articles/08/03/06/answersto_time_capsule_readerquestions.html

Bridging Time capsule thru existing network

İ have tried to bridge myTC thru Huawai gway thru ceeating a new network option at airport utility to able to make use of Ethernet ports but cannot access internet. It seems like my TC and Mac recieves wireless and LAN IP adresses but internet connection at Airpot Utility is all yellow. What am i doing wrong or missing?

Insure that you have an Ethernet cable connection from one of the LAN <-> ports on the Huawai gateway to the WAN "O" port on the Time Capsule.
Check to make sure that the Time Capsule has been configured to operate in Bridge Mode.

Add time capsule to existing network to make subnetwork (two routers?)

We have a modem/router (motorola) provided by isp to connect to internet. Most devices connect to this wirelessly. We just purchased an Airport + Time Capsule to create a subnetwork (add to existing network via ethernet cable), so that only a few devices can wirelessly connect to Airport + Time capsule to store time machine back up and to wirelessly print to one printer connected by usb to Time Capsule. When I select "I want to add to existing network" the motorola only shows up as a wireless, can't see the wired option. I tested that the ethernet cable works and connected to one port on motorola and WAN on Time Capsule. How do I tell Airport + Time Capsule to connect to motorola modem/router via the ethernet cable? I think I want it to connect via cable because I don't want the Airport to replace the existing router, rather I want to end up with two routers (one for entire network, and second one just for subnetwork).
Thank you.

Ok, your question confused me with the airport and TC as if it is two things not one.
when I connect the ethernet cable to TC, why doesn't modem/router show up in connect to list? Or if wrong list, where should I look, to select, to get it to "see" what it is connected to by ethernet?
Are you using v6 in Lion utility? I am using SL with 5.5 utility. There is no such place that I can find. (You will do better downloading and using v5.6 for Lion anyway).
On the manual setup.. summary page it will show the IP you get on the WAN port. From default settings this will all work properly.. there is nothing you need to do.
Plug ethernet from modem router to TC wan port. When you do the TC will get an IP.
If you open the internet tab, you can see Connect using.. ethernet. Just leave that. and everything else on auto.
For connection sharing, you still need to share a public IP.. although TC will complain you are not using public but private IP.. there is nothing you can do about that. Just set the TC to ignore the error double NAT.
When I began installation, I plugged everything in, then plugged in power. I opened Airport Utility, and followed on-screen instructions, but when selecting "connect to existing network with ethernet cable" my modem/router doesn't appear in the list.
Do not use connect to existing network.. that will bridge the TC which you don't want.
You have to use the existing network as if it is public network. And stuff behind your TC is private.
If I set the TC to bridge mode, won't it "take over" all router activity, and the first group of computers won't be able to connect directly to motorola? (I don't want this first group of computers to be able to connect to the TC).
Also, I don't want the TC to connect to the motorola wirelessly.)
If you set the TC to bridge it will not route at all... it will become a client of the existing network. And all IP addresses will be taken from the Motorola.. you will have one flat network, which is what usually people want.
If you are still struggling.. do this.
1. Tell me the IP address the existing Motorola is passing to the clients. Your one big issues here is making sure they are in fact on two different subnets.
2. As long as condition of 1 is fulfulled this will work at default setting. Reset the TC by holding down the reset for 10sec.
Plug Lan motorola to WAN TC.
Plug a computer into the TC to do setup.
Set up as if you have public IP on wan. Tell TC to ignore double NAT.
Set wireless and TC names as you want.
Now test internet.. on a client computer on the TC. it should work fine. At least for everything that doesn't need interactive connection.
3. You can improve things by using DMZ in the Motorola to the TC. That alleviates at least some of the issues that arise with double NAT.

Time capsule on existing network

I have a go flex home on my network. Recently switched to mac (June 2011) and have been using my goflex to store my time machine backup. I went on vacation to come back to time machine not recognizing my goflex and my backups magically were deleted. Anyway, will Time capsule work with on an existing network. I'd hate to get rid of my router when there is nothing wrong with it. Thanks.

not compatible and read this article.
http://www.appleinsider.com/articles/08/03/06/answersto_time_capsule_readerquestions.html

Replace Time Capsule in existing network

Based on previous posts, I see it is recommended to "start from scratch." That's ok.
I will be replacing an old Time Capsule with a new (current gen).
Existing network includes two Airport Extremes.
Should they be reset? If so... soft, hard or factory?
Thx.

It really helps to start over. So my response is always factory reset.
But it does depend on how the Extremes are being used.. As roaming network with ethernet back to whatever is the main router,, it is less of an issue.. if they are extending wireless it is a very big issue.

Introducing time capsule to existing network

I have my cable modem connected to a Cisco router (my main network) and connected to that a buffalo dd-wrt router that I use for my vpn. Can I just substitute the time capsule for the Cisco router and et up my home network that way? Wht do I need to be concerned about? Thanks for anyone's help!

You might find the TC does not handle vpn very well. It doesn't handle upnp at all you know.. so it depends what the rest of the network consists of.
You can always slip the TC into the network as a bridged device. plugged into the Cisco as well.

Add 1TB Time Capsule to existing network

Dear all,
I've recently installed a 3TB timecapsule, replacing a 1TB TC (3rd gen).
But as the 1TB TC has a 1 TB hard-disk, I'd like to add the 1TB TC to my network so I can use the the 1TB storage.
Is this possible, and if yes how should I do this?
Thanks for your feedback

Connect an Ethernet cable from one of the LAN <--> ports on your 3 TB Time Capsule to one of the LAN <--> ports on the old Time Capsule.
Now, when you open a Finder window, you will see two Time Capsules under the SHARED heading on the left side of the window.

Configure Time Capsule on 2 networks

Hello there. I've tried searching for my answer but I must admit this scenario isn't very common to begin with. I have a client that has 2 networks in their environment. Each network has a separate internet connection and are both used interchangably on wireless by end users. The idea is that if one connection goes down from one ISP, the other should remain up. However it isn't truly used this way because in effect users connect to whatever network gives them internet at the time. They are simply used to switching interchangably. And to add, the Time Capsule isn't setup very efficiently. It only works on one network right now and is only wireless. They would like to use it wirelessly and wired on both networks.
In doing some research I notice that the Time Capsule seems to have a 3 LAN ports and 1 WAN port. My question is if I connect an Ethernet cable from ISP#1's switch to Time Capsule's LAN Port 1 and connect another Ethernet cable from ISP#2's switch to Time Capsule's LAN Port 2, would the Time Capsule broadcast to both networks? Would users be able to connect to either network without a problem? I'm hoping this essentially makes the Time Capsule a dumb switch. But I don't know if this would create networking issues between both networks.
Additionally the users would like to be able to use Time Capsule wirelessly as well.
Rough layout of network:
http://imgur.com/iIsiHF7
Is there a better way to go about what I'm trying to do? Any advice would be appreciated.

You cannot do it that way.. sorry.. but the TC is a very limited box from the network point of view.. You need a router with dual wan.. or you need a NAS with dual IP setups. The TC is neither.. it cannot do more than one WAN at a time.. and it cannot work on two different IP address ranges at the same time.
I am not sure if you are prepared to put money into the setup.. dual wan routers are not cheap.. but that is the right way to do it.
You can use the TC simultaneously with internet on the other ISP.. but only on a computer where you have ethernet and wireless working.
The way you would do this is still messy though because the user would need to switch gateway if the main ISP falls over.
Look up dual wan routers.
eg at the cheaper end.
http://www.tp-link.com/en/products/details/?model=TL-R480T%2B

Adding another router to my Time Capsule's existing network.

Here's the situation: I live in a tri-level house with my TC on the 1st floor. My room, on the top floor, has bad reception (in certain spots, full bar, in others, half to no bars at all). Until I can afford to get an Airport Express to extend the wireless N reception, I thought I'd use my old Netgear router that has wirelss G with MIMO. The problem that I'm having now is that I don't know how to (or if I can) set up the Netgear router to extend the range of my TC's network (even though I know I'm sacrificing the speed of the connection by doing this). So, for you networking geniuses out there, is there any way I can do this? Also, while I'm asking questions here, why is my connection so hit or miss in my room?

first, isn't my TC essentially already running in "dual-mode" as it's backwards compatible with 802.11b/g?
Not quite. "Dual-mode," in this case, means running separate 802.11n only and 802.11b/g networks. 802.11b/g clients would NOT be able to access the 802.11n only network.
And second, with the "roaming" network, do I have to have my Netgear already hooked up to my Time Capsule via ethernet or are you suggesting that I go through set up with the ethernet connection and then I can place the Netgear in my room with the network expanded (with the b/g connection)?
In a "roaming" network each of the routers would need to be connected to an Ethernet backbone. So if your house is already wired for Ethernet this would be ideal. So in my suggestion, both the TC and the Netgear would have to be connected by Ethernet, either directly to each other or both connected to an Ethernet circuit on the same subnet.
To get a better idea of what I'm referring to, take a look at page 40 & 41 of the Designing AirPort Network document.

Configuring Time capsule to existing network

Similar Messages

Maybe you are looking for