Configuring Transport workflow

Hi all
I am planning to configure transport workflow in the Solutioin Manager 4.0 box. It already has TMS configured on that.If I configure Transport workflows will the already existing TMS will be deteled?
Plz reply soon
Jyoti

Hello,
each satellitesystem has his own domain controller.
The Solman is connected via domain link with these domain controller of each satellitesystem.
You can create this Links in two Steps:
1.     - Logon in Solman system where the domain controller is located
         - Tcode: STMS→Overview→Systems
         - Mark the satellitesystem where the domain controller is located
         - SAP System→Create→Domain Link execute
Now you only create the request for an domain link!
2.     - Logon in satellitesystem where the domain controller is located
         - Tcode: STMS→Overview→Systems
         - Mark the satellitesystem where the domain controller is located
         - There must be an option to answer the request from the Solman
You can check the domain link in Solman when you click in STMS on the button Legend.
The Typ Other Domain Controller has a special symbol.
You get detailed informations about domain link in the SAP Library SAP Solution Manager.
http://help.sap.com/saphelp_sm40/helpdata/en/ae/64c33af662c514e10000000a114084/frameset.htm
Please type in the search field "create domain link".
You will get some detailed documentations for domain link.
The transport workflow is realized in Solman with CRM and Solman actions.
Example:
If the status of service order SDHF (urgent correction) is changed from "In development" in status "To be tested".
there is an automatic transport into QAS system. Please be sure that you have realized the transport task, before.
You can create also a backround job for each system/mandant (except the productive system) for automatic import of all realized transport requests. We planed these backround jobs in all of our satellitesystems (except the productive system) every 10 minutes.
For you productive system you should start the backround job (Import Transport Request (Background) from the maintenance cycle manually. The report is called /TMWFLOW/SCMA_TRORDER_IMPORT.
This report imported all realized transport requests from the import queue of your system.
Hope it was helpful
Best regards
Thomas

Similar Messages

Transport Workflow Configuration

Dear All,
I want to configure Transport Workflow in my current system landscap and to eliminate the paper approval process.
So can you please give me the step by step configuration method for this.
Our Transport Policy is as follows.
Requestor --> Releasing Admin (Who relase the request) --> Approver --> Basis Admin (Who import the request)
So can you help me regarding this.
Thanks & Regards,
Alpesh Patel

Dear All,
I found the solution hence I am going to close this thread.
Regards,
Alpesh Patel

Approval procedure in Transport Workflow

Hi,
I configured transport workflow QA approval procedure. When i approve the proposal it is getting imported into QA automatically. I want to approve but let somebody else to move the transport manually.
How do i do this?
Also once its moved to QA and tested fine how is the approval to PRD handled using transport workflow?
Please advice.

HI Shannon,
Did you happen to get a solution ?
We also have a requirement where we only want the approvers to approve them. The transports should not be automatically imported in production.
When the proposals are approved, the transports are automatically imported.We do not want this to happen.
We want to do it manually at a particular time.
Regards
Bharathwaj

How can I add a User to the transport workflow

Hi all,
I want to add one user to the transport workflow in BW Dev system? How can I do it, PLEASE.
Thanks.

Hi,
Check this if you can reset the workflow if the configuration of old user get damaged instead of creating a new one.
http://help.sap.com/saphelp_erp2005/helpdata/en/06/1c3737f0e64142e10000009b38f839/frameset.htm
Please reward if it helps.

Transport Workflow / Send Mail

Hi Experts,
I want to send email automatically to the person is going to aprove the change request for release strategy in transport workflow.
I made configuration for service desk but now I want to do it for this.
Any clue?

At which point do you send the mail? After approval or as a notification for the task? If you want to send a notification to the approver for new workitems you can use program RSWUWFML2 or if you are on ECC Extended notifications. If you want to send an e-mail after approval you can get the agent from the workitem. After it is executed the user who executed the workitem is stored in WIACTUAL_AGENT in the task, you can bind this to a container element in the workflow.
Regards,
Martin

How to Configure Transport MAnagement system in CHARM

Hi
How to Configure Transport MAnagement system in CHARM? Here our requirement is when ever a change request approved in the background Transport request should be created automatically. We have configured all the Transport Routes in our lanscape.
Can any one tell me the detailed process? If you have any Configuration document please share it to me
Points will awarded for helpful answer
Thanks
Bhaskar

In a two system landscape is it necessary to make development the domain controller always?
No such compulsion as such exist(correct me if wrong),however why you want to make production your domain controller?
This is not recommended.
Regards,
Ashutosh

Configuring ERM workflow in CUP issue (GRC AC 5.3)

Hi once again fellow SAP Security Folk,
Using GRC AC CUP 5.3 SP 13 I am trying to configure ERM workflow for the following scenario :
Every role change made via ERM requires approval from relevant Business Process (BP) area. If the role change contains an SOD conflict of Medium or higher then approval is required from a 2nd central approver (basically regardless of the business process area).
I have not been able to configure ERM workflow within CUP to be able to do this u2013 I have only been able to configure it for dual approval, i.e. every change must have approval from both BP approver and Central approver before request can progress. I did this by assigning the Central approver to all Business Processes as an additional approver. This means that the conditions for the scenario above are met but the drawback is that all other requests also require approval from Central approver even though they donu2019t need to, generating additional workload.
Can anyone advise if this is possible and how to do it ?
Further info:-
I have setup in CUP an ERM Initiator, an ERM Custom Approver Determinator (CAD), an ERM Stage.
I have setup in ERM I have defined Business Process Approval Criteria for each Business Process approver.
I tried creating a 2nd ERM stage using a separate 2nd ERM CAD but this meant all changes required 2nd approval before request can continue.
I tried modifying the 1st Stage to Approval type All Approvers but this meant all changes required approval from all possible BP Approvers (instead of any one) before request can continue.
I tried creating a Detour/Fork but could only see within the Workflow Type selection criteria non ERM workflow types.
Thanks
Steve

You can either type in the configuration, like the what option you selected for approver (CAD or role or...etc), or other way is to capture the change log which shows what was the configuration for that stage....
(Configuration -< Change Log -> Search Change log)
Cheers !!
Zaheer

Configuring Transport route in Java system

Hi,
Pls let me know the steps to configuring transport routes in Java System.

Hi,
Please look at the following pdf which tells you about CTS+ in portal with only java and non abap objects.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
Rakesh

ORA-12560: TNS:protocol adapter error while configuring ORACLE Workflow

Hi,
I am trying to configure ORACLE Workflow. I have given sys password and other parameters in the given format in Workflow Configuration Assistant. My DB Server is in my local network and I connect to it using SID in SQL Plus. But I got the following error while WorlflowCA tries to execute relevant script.
ERROR:
ORA-12560: TNS:protocol adapter error
SP2-0640: Not connected
WorkflowCA: Non-Oracle10g database detected
If anybody is having any clues, please help me.
Thanks in advance
Ajish M.

Thanks a lot for your quick reply.
I've read all the posts mentioned (quite a few more) but I couldn't find any suggested solution to the "non-oracle10g"-problem other than using the global db name instead of the sid - which didn't help in our case:
However, in a last desperate attempt to solve the problem on my own before launching another cry-for-help-post I did try running the configuration assistant using the correct password for the SYS user 8-} and - strange but true - it did work :-)
Needless to say: I used the global db name of course, so I can't say what would have happened without it, but I trust your hint was a legitimate one.
Anyway - I gues that error Message concerning a "non-oracle10g database" was slightly misleading in this case.... grrrr.
Andreas

Request owner approval in Transport Workflow (DEV to QTY)

Hello,
I have set up the transport workflow between DEV and QTY systems on ERP6.
I need to allow developers and consultants to approve their own transport proposals in order to facilitate transport to the QTY system.
Currently, when an user releases a transport request and creates a transport proposal, the approval message is sent to the TMS Worklist.
Therefore, only administrators can approve transport proposals.
How to allow users to approve and import their own requests through the Transport Proposal Inbox in Transport Organizer (SE10) ?
Thanks in advance.

Hi Serguei,
Please check whether you have specified &_WF_INITIATOR& as excluded agent.
Please remove &_WF_INITIATOR& as excluded agent.
With Best Regards
Julia

KM Configuration transport

Hi All
I have created new layout set
I want to transport it to QA , please let me know the steps to transport the newly created layout set
Thanks
Karthi D.

Hi Karthi,
In this blog series, Gopala Krishan explains how to transport KM Configurations.
Link: [KM Transports Part I|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/4163]
Link: [KM Transports Part II|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/4171]
Link: [KM Transports Part III|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/4177]
I'm on Portal 7.0 SP20 and I know for sure that KM Configuration Transport procedures are all valid. (KM Content Transports changed since SP14).
The only difference could arise if you are using CTS+ for transports (if you are not, ignore this sentence).
Hope it helps.
Best Regards,
Marcelo

AE 5.1 and 5.2 - Configuring parallel workflows for "Delete" Request type

Has anyone configured parallel workflows for the "Delete" Request type? I want to configure 1 for SAP and 1 for non-SAP applications, but have been unable to do it successfully.
The initiators I have created that do not work are:
1 - SAP initiator:
SAP application with "OR" condition
Request Type = Delete with "AND" condition
2 - Non-SAP initiator:
Non SAP application 1 with "OR" condition
Non SAP application 2 with "OR" condition
Non SAP application 3 with "OR" condition
Request Type = Delete with "AND" condition
When I create a request to Delete a user with SAP app and Non SAP app I get the error: "Error in creating request. Multiple Initiators, [NON SAP DELETE, SAP DELETE] Found."
Based on what I am reading on p. 58 of the AE52ConfigGuide.pdf, this should be possible to do. Does anyone have any suggestions?

This is my understanding.,
A request cannot have more than one initiator. You cannot trigger multiple initiators for one single request. In your case both attributes SAP & Non SAP application are given with OR condition which makes both the initiators alike. As mentioned in the documentation the request for deletion can be made to happen in both SAP & Non SAP application by having forked path (for this the initiator should be OR Application SAP OR Non SAP Application AND Request Type Delete). Given the other option then it should have different initiator for SAP and Non SAP applications by giving them with AND condition.

HOW CAN I TRANSPORTA WORKFLOW?

HOW CAN I TRANSPORTA WORKFLOW? THANQ

I see that you have still not received any hints about how to transport a workflow.
Are you not asked for a workbench transport when you save the workflow definition? I think this is solved by changing a setting in SOBJ or whatever the transaction is called. Of course, the prerequisite is that your basic workflow settings (transaction SWU3) is already OK. Ask basis people for assistance before you create havoc by making changes in SOBJ.
Otherwise, search for OSS Notes. There probably is one mentioning this problem.

Transport workflow engine

Hello SAP Gurus,
We are new to this transport workflow automation process. We are currently testing this in sandbox (S00).
S00 has multiple clients. Each client represents one country (example - client 200 represents Belgium,
201 represents France, 202 represents Mexico, 250 represents USA etc).
Each client have different Developers/functionals/infosecs/users.
As only one Workflow engine can be defined per instance(S00)/client (250) under STMS --> systems overview -->transport domain --> workflow engine tab we have below issues.
Users from other countries cannot able to approve/reject/import their transport proposals - reason being
their user id is not created in 250.
Is there any options to create seperate workflow engine per client? or how can we do this for other countries without enabling CUA or maintaining all users at one client(workflow engine client).
Any suggestions will be greatly appreciated,
thanks & best regards,
Kannappan.S

Hi Kannappan
You need to this way. Even i follow the same way. Here 200 and 400 clients are customizing clients. I will develope workflows in 300 client after developing i will transport the workflow from 300 to 400 then from 400 only i can transport to quality and to production.
You can also do the same way. From differents clients move to 250 from 250 you can transport to quality and to production. No need to move any users.
To move the transport request from different client to 250 do this way. go to 250 client and opent the transport fron SE01 and double click on the partent request id and do a small change in the description and save it. This will do the transport from different client to 250.
Regards
vijay

Transport WorkFlow

Dear All,
I want to use the transport work flow for transporting the customization from DEV to QAS and PRD systems.
I followed the
[SAP HELP|http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/34bd66c03d11d2851c0000e8a57770/frameset.htm] to configure stms work flow.
now I found that the proposal comes to me to approve /import it and no thing go to my manager to approve but I want the workflow works by this way the proposal go to my manager to approve it and after that the proposal comes to me to import it,
So could you please tell me how can i make this?
Thanks in advance
Edited by: Sherif Eid on Feb 3, 2008 3:39 PM

What did you do to find the workflow log? It doesn't look like you are trying to find it, but just wait for an answer.
You can find it by going to the inbox (if you still have a task there) select the task and click on the icon which looks like a scroll or paper or something. When you hover over it with your mouse it will say workflow log. Then go to the technical log and when you change the layout of this you can find the template number.
Another way is after starting a workflow, start transaction SWI1 and you will get a list of started tasks and workflows, identify yours. From here you have the option to go to log using the same icon.
Regards,
Martin

Configuring Transport workflow

Similar Messages

Maybe you are looking for