Configuring TREX for CCM 2.0

Hi,
We are using SRM 5.0 and CCM 2.0, after creating supplier,master and procurement catalog, and while publishing procurement catalog we realized we have not configured trex, so kindly let us know how to do the same along with anyother details you think will help us in doing the same.
In our case, SRM and CCM are in the same server.
Let me know how to configure it in case both were in different server.

Hi,
   Some related links which might be helpful.
sizing SRM 5.0 SLD with XI - hardware
Re: CCM integration with EBP
BR,
Disha.
Pls reward points for helpful answers.

Similar Messages

  • Configuring TREX for sld

    hello to all.
    Why do i need to do the post installtion of the trex ""Configuring TREX" for sld"?
    I have to do it?
    Thanks
    Menashe

    If you are installing any component of 'NetWeaver', you should register it with Central SLD server of your landscape.
    Same case with Trex too, that's why you have that post installation step there. However, it is not a 'Mandatory' step which needs to be done immediately after installation. But in future, you might require this. So you may proceed to do it after proper understanding of what is an 'SLD' even !
    This step itself tells it's purpose as seen from below help page
    http://help.sap.com/saphelp_nwpi711/helpdata/en/42/e33ae230ba3ee2e10000000a1553f6/content.htm
    Following link will help you in understanding the SLD
    https://www.sdn.sap.com/irj/sdn/nw-sld

  • Configuring trex in ccm 2.0

    Hi,
    We are using SRM 6.0 and CCM 2.0, after creating supplier,master and procurement catalog, and while publishing procurement catalog we realized we have not configured trex, so kindly let us know how to do the same along with anyother details you think will help us in doing the same.

    Hi Vishal,
    Mail me on
    [email protected]
    or give yr ID for
    TREX setting doc .
    BR
    Dinesh

  • TREX for CCM

    Dear Experts,
    We have implemented self service procurement and we are planning to implement CCM within the same client.
    As i understand that TREX is mandatory for CCM, I required some clarifications from you.
    1) We should maintain seperate client for TREX? or we can use same ccm client?
    2) How do we install TREX component in our server or it 's already exist when we install SRM?
    3) If I go for different client for TREX then what all are the settings i need to maintain for this>
    Thanks for your help
    Thanks
    Ravi

    Hi Ravi,
    For CCM yes you are correct TREX is mandatory
    For your questions:
    1)     Well I assume you have installed TREX somewhere once is installed and you performed the configuration of TREX. TREX will create automatically an RFC in SRM (if you are using CCM in the same client of SRM)  or the CCM client this is how you connect to TREX from your CCM client.
    2)     You need to install TREX it does not come with your CCM/SRM installation this is a standalone NetWeaver component: you can find the guides here under Standalone Engines-> SAP NEtWeaver Search and Classification TREX
    https://websmp106.sap-ag.de/installnw70
    You will find two guides single host and multiple host server download the guide of Single Host this is most used for the majority of installations but every installation is different depending on your business requirements.
    Multiple Host
    https://websmp206.sap-ag.de/~sapidb/011000358700000854982007E/TREX71InstallMultipleHosts.pdf
    Single Host guide
    https://service.sap.com/~sapidb/011000358700000854952007E/TREX71InstallSingleHost.pdf
    3)     TREX is not installed in a client is a standalone engine Is not ABAP component  the only thing you need to do after you configure TREX is make sure that the RFC got created (during the configuration of TREX)
    Best Regards,
    Juan Jose

  • Configuring trex for sap dms

    Hi,
    We have installed SAP DMS (ECC6.0) to manage some of our documentation. Now we are trying to configure TREX to index and search for those documents, which are stored inside the SAP Content Server. Right now we have the entire technical configuration completed, but we cannot find any documentation that explain us how to go through the rest of the process... We don't know what transactions to call or tables to maintain in order to configure indexes and search functionality. Please note that we use transaction CV04N to search for documents.
    Can anyone please provide me information on how to configure TREX?
    Thank you.
    Kind regards,
    Ricardo Inácio

    I am facing the same problem: I need some documentation on how to use TREX search in CV04N.
    There must be some docs, but I cannot find them.
    Thanks in advance
    Andy

  • TREX for CCM implemenetion

    Dear Experts,
    We have implemented self service procurement and we are planning to implement CCM within the same client.
    As i understand that TREX is mandatory for CCM, I required some clarifications from you.
    1) We should maintain seperate client for TREX? or we can use same ccm client?
    2) How do we install TREX component in our server or it 's already exist when we install SRM?
    3) If I go for different client for TREX then what all are the settings i need to maintain for this>
    Thanks for your help
    Thanks
    Ravi

    Hi Masa,
    Thanks for your reply. I understand from you that we should go for MDM catalogue only right?
    Approximately howlong will take us to implement the MDM catalogue *we required only 6 intenral catalogues).
    Please let us know approximate time..
    Thanks
    Ravi

  • Authorization error while configuring  TREX for HR - talent search

    Hi All
    HR team is performing  talent search configuration and they are using Tcode ESH_Cockpit. Here while creating, they  get this error "Error while preparing".
    For one of the failed connectors (eg: HRTMC AES Documents), job log is as given below:
    24.10.2011 08:34:16 Job started
    24.10.2011 08:34:16 Step 001 started (program ESH_SE_CONNECTOR_MOD_BGD, variant &0000000000027, user ID T710752)
    24.10.2011 08:34:50 Authorization check CP_USER_ALL:
    24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
    24.10.2011 08:34:50 Authorization check CP_USER_ALL:
    24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
    24.10.2011 08:34:50 Authorization check CP_USER_ALL:
    24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
    24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
    24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
    24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
    24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
    24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
    Here they have SAP_ALL assigned and even then they are getting above authorization related error . 
    Your advise will be really helpful. Thanks in advance for your help.
    Regards,
    Aditya

    TREX also uses gateway programs.
    Check with your basis folks or tcode SMGW (go to --> expert functions --> external security) to see whether it is restricted.
    There are also some SAP notes about this...
    Cheers,
    Julius

  • Configuring TREX for HCM Talent management functionality using Nakisa

    Hi,
    We are configuring the Talent Management functionality in ECC-HR system.We have installed TREX 7.1 patch number 36 and Nakisa.
    We are using the 'embedded search' functionality.
    Now, also and are trying to create indexes using the Administration cockpit (tcode ESH_COCKPIT).
    However we are getting the error 'System DHS, client 100: A connection already exists' while creating a 'search connector' in the cockpit.
    Also, we are getting the below log error in the system in SM21:
    ''TREX_ICM - Send_Error; return code = 112, return text =HTTPIO_PLG_ICM_CONNECT_FAILED-Fehle''
    Kindly let us know what should be done.
    Thanks & Regards,
    Kunal.

    Hi,
    Now the initial error we were getting is resolved by applying one note suggested by SAP OSS.
    However, now we have another issue, while creating indexes using tcode ESH_COCKPIT in the backend system.
    We get error when we try to go to tcode TREXADMIN --> TREX
    ABAP Customizing --> 'Net Performance'.
    It gives the error below:
    ERROR
    Remote communication failure with partner http://:33003/ICMConnectTest
    HTTP Status 507: Kernel error:ICM_HTTP_CONNECTION_FAILED (400 )
    Kindly let us know why we get the error because even while recreating
    the indexes we get similar error i.e. Remote communication failure with
    partner http://cca1cs0872:33003/asxml/multiIndexCellTable
    The icm timeout parameter is sufficiently large i.e. around 30 minutes.
    Also, the RFC (TREX_DHS) from ECC-HR system to the TREX is working fine.
    Thanks & Regards,
    Kunal.

  • Troubleshooting email alerts for CCMS

    Hi,
    I'm trying to configure emails for ccms alerts which are generated in our solution manager system.
    Our CEN is client 700.
    Scot activated and working in both client 000 & 700
    Copy made of method CCMS_OnAlert_Email and assigned to autoreactions in RZ21. ( Auto-reaction method ticked in copied method.)
    Parameter maitained in autoreaction:
    SENDER = JIMOSHEA
    RECIPIENT = <email address>
    RECIPIENT-typeid = c
    SUBJECT_ALERT
    Dispatching jobs running and ok.
    User contaIns email address in SU01
    Restarted sol man system.
    I'm wondering if anyone has come across a workflow or even some reports which can be used to tested the different phases of "emailing ccms alerts" so I can see where my config is failing.
    Thanks in Advance
    Jim

    We're using PI 7.11 so it's not using the agent per say but I did a complete restart and this did not help.
    The ccms monitor is reporting the system is down so it seems in Sol Man it's not executing the reaction method.
    With SAP NetWeaver 7.1, the architecture of the CCMS was significantly
    developed, meaning that, among other things, you no longer require a
    SAPCCMSR CCMS agent for double-stack systems, even with a central
    monitoring system with SAP NetWeaver 7.01. Therefore, do not install
    this agent for SAP NetWeaver 7.1 double-stack systems.

  • Is TREX required for CCM 2.0 search?

    Hello,
    Is  TREX a manadatory component for CCM 2.0?
    Regards,
    Bejoy

    Hi,
    As already indicated TREX is a required component of the SAP CCM 2.0, even in the scenario where the search functionality would not be used (i.e. in a scenario of just navigating the hierarchial structure and selecting items) the TREX is still a requirement for publishing and indexing of the published data.
    Regards,
    Jason

  • "No CEN system configured for CCMS monitoring" message

    Hello,
    When I want to use the reports option on central mode I receive this message:
    "No CEN system configured for CCMS monitoring"
    Can someone please guide me through this configuration?
    Thank you in advance,
    Roy

    Hi Roy,
    Monitoring Setup Guide will tell you how to setup CEN
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f30e51-0a01-0010-f59a-fecea2b95b2c
    Regards
    Juan
    Please reward with points if helpful

  • Which Version of TREX is Required for CCM 2

    Hi,
    We are upgrading to Portal NW04s, SRM 5 and CCM 2. We are using TRex for searching the CCM catalog. What version of TREX is required to do so? (We currently are running version 6 and would like to know if it can stay that way or if we need to upgrade to TREX 7.0)
    Thanks,
    Bert

    [http://www.mozilla.com/en-US/firefox/5.0beta/system-requirements/ Firefox 5 System Requirements]
    '''Windows Operating Systems'''
    *Windows 2000
    *Windows XP
    *Windows Server 2003
    *Windows Vista
    *Windows 7

  • Need step by step CCMS Alerts configuration document for PI 7.1

    Hello Experts,
                          I need to configure the CCMS Alerts in our PI 7.1 box. Please provide the step by step configuration document for configuring CCMS Alerts in PI 7.1 System.
    Advance Thanks and Regards,
    Nageswari

    hi Nageswari,
    Configuring CCMS agent for PI is like any other dual stack stystem configure except few PI 7.1 specific configuration.
    You need to install both ABAP & JAVA CCMS agents. Please go through below URL that brief on PI 7.1 required configuration
    https://cw.sdn.sap.com/cw/docs/DOC-43543
    Regards
    Sekhar

  • Configure TREX 6.1 for EP6 SP12

    Dear Friends,
              We have EP6 SP12 installed on windows 2003 server. We have just installed TREX 6.1. I dont get to see the TREX configuration within portals. I suppose the configuration should lie under System Administration -> System Configuration -> Knowledge Management -> Content Management -> TREX. I dont see TREX under Content Management. Can someone guide me where to configure TREX within portals?
    Thanks,
      J.D

    After installing, You shold configure indexes, crawlers, repositories etc.
    All configuration could be found in "System Administration -> System Configuration -> Knowledge Management -> Index Administration" and "related links" section in that area.
    You can also check this: http://help.sap.com/saphelp_nw04/helpdata/en/e2/9c7de32a3984429607de7e1b519a09/frameset.htm
    and this: http://help.sap.com/saphelp_nw04/helpdata/en/c2/d81e40777cdd5fe10000000a155106/frameset.htm
    Hope this helps
    DK

  • Error in configuring TREX 7.0

    I have installed TREX 7.0 and CRM 5 on different machines. When I configuring Trex in stand-alone trex-admin-tool according to TREX manual, I get error message "RFC Destination could not be created " and error in log:
    >TS> Fri Dec 15 12:55:23 2006
    T:2916 ======> Name or password is incorrect (repeat logon)
    T:2916 <* RfcReceive [2] : returns 3:RFC_SYS_EXCEPTION
    but I can login with SAP GUI using this login and password.
    Any solutions how to make it work?
    Thanks.

    Hello, thanks for your replay.
    That is my TrexRFcServer.ini:
    #configfile for TREXRfcServer
    [CONNECTION]
    USE_QUEUESERVER=NO
    SEARCH_MAXHITS=0
    USE_REPLICATION=NO
    HOST=sapdevsrv1
    INSTANCE=sapgw06
    [ccms]
    record = on
    satracer = JarmLike
    [trace]
    default = error
    trexrfcsvr = error
    trexrfcdll = error
    filename = trace/TrexRfcServer
    maxfilesize = 10000000
    maxfiles = 10
    maxlines = 0
    alertwriter = SimpleAlertWriter
    alert = error
    alertfilename = trace/TrexRfcServerAlert
    #SAPTraceLevel = 4
    #formatter = LogViewerFormat
    #writer = LogViewerFormat
    [communication]
    listenport = 30007
    maxchannels = 200
    maxendpoints = 20
    [global]
    reconnect_interval=360
    [thread_Trex_CR5_20061215172929@sapdevsrv1:sapgw06]
    #INFO *** SAP System:CR5, RFC Destination:TREX_CCR5, local GW. Section inserted: 2006-12-27 16:30:03 by AlertServer Check.
    host=sapdevsrv1
    instance=sapgw06
    service=Trex_CR5_20061215172929
    instances=1
    What i have to change to use GW on server with my SAP system ?

Maybe you are looking for

  • Functions in TM

    Hi Experts, Is there any function in time management to call the field values of Z-tables, in PCR for calculation purpose? Regards, RK.

  • GRMG shutting down and last measurement too old

    Hi I have a few problems with the GRMG. I am trying to implement the best "J2EE down" monitor. 1) Scenario shutting down When the webserver/j2ee that is checked is down (not responsing at all, like for instnace in the first minutes after system start

  • Table cell links

    Got this link but cant seem to get them to work, need a little help if possible, ill talk you through what ive done, hopefully someone can point me in the right direction. 1st hear is the link i got the example from : .[ table cell links i made mysel

  • How can i replace all parenthesis text in a document ?

    Hi everyone ! I'm a designer and i know nothing about scripting. But actually i would like to remove a bunch of text. I am working on a map, and i need to get rid of all text in parenthesis (the parenthesis included in). I know there will be a faster

  • Reduce grid spacing between icons in Finder even further

    Hi, Is there a way to reduce the grid spacing of icons in the Finder even further than what the cmd-I window allows? It still seems a lot of wasted space, I'd say, and I think some of my folders would look cooler if I could squeeze the icons closer t