Configuring trex in ccm 2.0

Hi,
We are using SRM 6.0 and CCM 2.0, after creating supplier,master and procurement catalog, and while publishing procurement catalog we realized we have not configured trex, so kindly let us know how to do the same along with anyother details you think will help us in doing the same.

Hi Vishal,
Mail me on
[email protected]
or give yr ID for
TREX setting doc .
BR
Dinesh

Similar Messages

Configuring TREX for CCM 2.0

Hi,
We are using SRM 5.0 and CCM 2.0, after creating supplier,master and procurement catalog, and while publishing procurement catalog we realized we have not configured trex, so kindly let us know how to do the same along with anyother details you think will help us in doing the same.
In our case, SRM and CCM are in the same server.
Let me know how to configure it in case both were in different server.

Hi,
Some related links which might be helpful.
sizing SRM 5.0 SLD with XI - hardware
Re: CCM integration with EBP
BR,
Disha.
Pls reward points for helpful answers.

Error in configuring TREX 7.0

I have installed TREX 7.0 and CRM 5 on different machines. When I configuring Trex in stand-alone trex-admin-tool according to TREX manual, I get error message "RFC Destination could not be created " and error in log:
>TS> Fri Dec 15 12:55:23 2006
T:2916 ======> Name or password is incorrect (repeat logon)
T:2916 <* RfcReceive [2] : returns 3:RFC_SYS_EXCEPTION
but I can login with SAP GUI using this login and password.
Any solutions how to make it work?
Thanks.

Hello, thanks for your replay.
That is my TrexRFcServer.ini:
#configfile for TREXRfcServer
[CONNECTION]
USE_QUEUESERVER=NO
SEARCH_MAXHITS=0
USE_REPLICATION=NO
HOST=sapdevsrv1
INSTANCE=sapgw06
[ccms]
record = on
satracer = JarmLike
[trace]
default = error
trexrfcsvr = error
trexrfcdll = error
filename = trace/TrexRfcServer
maxfilesize = 10000000
maxfiles = 10
maxlines = 0
alertwriter = SimpleAlertWriter
alert = error
alertfilename = trace/TrexRfcServerAlert
#SAPTraceLevel = 4
#formatter = LogViewerFormat
#writer = LogViewerFormat
[communication]
listenport = 30007
maxchannels = 200
maxendpoints = 20
[global]
reconnect_interval=360
[thread_Trex_CR5_20061215172929@sapdevsrv1:sapgw06]
#INFO *** SAP System:CR5, RFC Destination:TREX_CCR5, local GW. Section inserted: 2006-12-27 16:30:03 by AlertServer Check.
host=sapdevsrv1
instance=sapgw06
service=Trex_CR5_20061215172929
instances=1
What i have to change to use GW on server with my SAP system ?

TREX for CCM

Dear Experts,
We have implemented self service procurement and we are planning to implement CCM within the same client.
As i understand that TREX is mandatory for CCM, I required some clarifications from you.
1) We should maintain seperate client for TREX? or we can use same ccm client?
2) How do we install TREX component in our server or it 's already exist when we install SRM?
3) If I go for different client for TREX then what all are the settings i need to maintain for this>
Thanks for your help
Thanks
Ravi

Hi Ravi,
For CCM yes you are correct TREX is mandatory
For your questions:
1)     Well I assume you have installed TREX somewhere once is installed and you performed the configuration of TREX. TREX will create automatically an RFC in SRM (if you are using CCM in the same client of SRM) or the CCM client this is how you connect to TREX from your CCM client.
2)     You need to install TREX it does not come with your CCM/SRM installation this is a standalone NetWeaver component: you can find the guides here under Standalone Engines-> SAP NEtWeaver Search and Classification TREX
https://websmp106.sap-ag.de/installnw70
You will find two guides single host and multiple host server download the guide of Single Host this is most used for the majority of installations but every installation is different depending on your business requirements.
Multiple Host
https://websmp206.sap-ag.de/~sapidb/011000358700000854982007E/TREX71InstallMultipleHosts.pdf
Single Host guide
https://service.sap.com/~sapidb/011000358700000854952007E/TREX71InstallSingleHost.pdf
3)     TREX is not installed in a client is a standalone engine Is not ABAP component the only thing you need to do after you configure TREX is make sure that the RFC got created (during the configuration of TREX)
Best Regards,
Juan Jose

Configuring trex for sap dms

Hi,
We have installed SAP DMS (ECC6.0) to manage some of our documentation. Now we are trying to configure TREX to index and search for those documents, which are stored inside the SAP Content Server. Right now we have the entire technical configuration completed, but we cannot find any documentation that explain us how to go through the rest of the process... We don't know what transactions to call or tables to maintain in order to configure indexes and search functionality. Please note that we use transaction CV04N to search for documents.
Can anyone please provide me information on how to configure TREX?
Thank you.
Kind regards,
Ricardo Inácio

I am facing the same problem: I need some documentation on how to use TREX search in CV04N.
There must be some docs, but I cannot find them.
Thanks in advance
Andy

Configuring TREX for sld

hello to all.
Why do i need to do the post installtion of the trex ""Configuring TREX" for sld"?
I have to do it?
Thanks
Menashe

If you are installing any component of 'NetWeaver', you should register it with Central SLD server of your landscape.
Same case with Trex too, that's why you have that post installation step there. However, it is not a 'Mandatory' step which needs to be done immediately after installation. But in future, you might require this. So you may proceed to do it after proper understanding of what is an 'SLD' even !
This step itself tells it's purpose as seen from below help page
http://help.sap.com/saphelp_nwpi711/helpdata/en/42/e33ae230ba3ee2e10000000a1553f6/content.htm
Following link will help you in understanding the SLD
https://www.sdn.sap.com/irj/sdn/nw-sld

How to configure TREX to enable search in MDM?

Hi All,
Has anyone configured TREX to enable search in MDM before?
Can it be done?
Please provide help on this.
Thanks
Rajat.

Hi Rajat,
For the configuration of TREX to enable search in MDM, check the below link which gives the complete information of TREX 6.1
Link : https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1545e1bf-0d01-0010-a5ab-f80e574423bf
Hope this would be helpful!!!!!!!!
Regards,
Parul

How to configure trex 6.1 in srm 5.0

how to configure trex 6.1 in srm 5.0

Hi vishal,
Please have a look here :
http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/a86642a3423654e10000000a155106/frameset.htm
Kind regards
Yann

Configure TREX 6.1 for EP6 SP12

Dear Friends,
We have EP6 SP12 installed on windows 2003 server. We have just installed TREX 6.1. I dont get to see the TREX configuration within portals. I suppose the configuration should lie under System Administration -> System Configuration -> Knowledge Management -> Content Management -> TREX. I dont see TREX under Content Management. Can someone guide me where to configure TREX within portals?
Thanks,
J.D

After installing, You shold configure indexes, crawlers, repositories etc.
All configuration could be found in "System Administration -> System Configuration -> Knowledge Management -> Index Administration" and "related links" section in that area.
You can also check this: http://help.sap.com/saphelp_nw04/helpdata/en/e2/9c7de32a3984429607de7e1b519a09/frameset.htm
and this: http://help.sap.com/saphelp_nw04/helpdata/en/c2/d81e40777cdd5fe10000000a155106/frameset.htm
Hope this helps
DK

How to configure trex name server

hi all
while creating index i am getting the error
Index could not be created; creating index failed: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
for the above error i need to configure the trex name server using TREX Configuration in the J2EE Engine in j2ee visual administrator .
can any one tell me the clear path that where to configure the above and where j2ee visual administrator installed how to configure the name server
awaiting for replies
regards
ganesh

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

How To Configure TREX Name Server&Port for UDDI Service Registry Settings

Hello Experts,
we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
If I do so, I receive "Connection to TREX not successful".
When I press the Update TREX button I receive this exception:
com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
I am not sure if the port number is correct -> is there a way to lookup the correct port number?
Is there something else I should configure?
Thanks for help, best regards
Thomas

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

How to configure TREX so it does not include title in the index created

Hi all
Can someone tell me where I can find the TREX configuration that disables the indexing of the html title. If I for instance want to index www.sap.com, and I do not want the title = "SAP - Business Software Solutions Applications and Services" to be indexed, how do I do that?
If I were to index www.sap.com I would not be interested in getting a hit for all pages when a user searches for "software" or "solutions" for example.
Any help will be rewarded.
Kind regards,
Martin Søgaard

Hi Praveen
Thank you for your post. It was exactly was I was searching for, and it didn't come up on my searches in SAP documentation. As of now it seems to work as intended on our DEV system.
Only thing about the documentation was that I had to change the std.html-config file in the SYS-folder of the TREX installation folder in order for it to work (the std.html-config file was located in two different folders).
Thanks.
Kind regards,
Martin Søgaard

Configuring TREX for HCM Talent management functionality using Nakisa

Hi,
We are configuring the Talent Management functionality in ECC-HR system.We have installed TREX 7.1 patch number 36 and Nakisa.
We are using the 'embedded search' functionality.
Now, also and are trying to create indexes using the Administration cockpit (tcode ESH_COCKPIT).
However we are getting the error 'System DHS, client 100: A connection already exists' while creating a 'search connector' in the cockpit.
Also, we are getting the below log error in the system in SM21:
''TREX_ICM - Send_Error; return code = 112, return text =HTTPIO_PLG_ICM_CONNECT_FAILED-Fehle''
Kindly let us know what should be done.
Thanks & Regards,
Kunal.

Hi,
Now the initial error we were getting is resolved by applying one note suggested by SAP OSS.
However, now we have another issue, while creating indexes using tcode ESH_COCKPIT in the backend system.
We get error when we try to go to tcode TREXADMIN --> TREX
ABAP Customizing --> 'Net Performance'.
It gives the error below:
ERROR
Remote communication failure with partner http://:33003/ICMConnectTest
HTTP Status 507: Kernel error:ICM_HTTP_CONNECTION_FAILED (400 )
Kindly let us know why we get the error because even while recreating
the indexes we get similar error i.e. Remote communication failure with
partner http://cca1cs0872:33003/asxml/multiIndexCellTable
The icm timeout parameter is sufficiently large i.e. around 30 minutes.
Also, the RFC (TREX_DHS) from ECC-HR system to the TREX is working fine.
Thanks & Regards,
Kunal.

TREX for CCM implemenetion

Dear Experts,
We have implemented self service procurement and we are planning to implement CCM within the same client.
As i understand that TREX is mandatory for CCM, I required some clarifications from you.
1) We should maintain seperate client for TREX? or we can use same ccm client?
2) How do we install TREX component in our server or it 's already exist when we install SRM?
3) If I go for different client for TREX then what all are the settings i need to maintain for this>
Thanks for your help
Thanks
Ravi

Hi Masa,
Thanks for your reply. I understand from you that we should go for MDM catalogue only right?
Approximately howlong will take us to implement the MDM catalogue *we required only 6 intenral catalogues).
Please let us know approximate time..
Thanks
Ravi

Configuring CCMS_OnAlert_Email with CCMS

Hi,
I have setup CCMS_OnAlert_Email with CCMS for transport alerts, I have also setup distribution list in client 000 but I got express message as "Cannot process message, no route from DDIC to DEV:<client>:<userid>", please let me know how to route DDIC to other client users.
Thanks in advance
KVR

I have configured in individual system, what CCMS background jobs run for transport alerts? I have configured CCMS alerts through DDIC in 000. I am assuming jobs will run with that user.
I don't have any other users so I have configured a distribution list for forwarding the alerts. But when I am trying to send a mail from SAP business workplace using distribution list I was getting above error.
Thank you

Configuring trex in ccm 2.0

Similar Messages

Maybe you are looking for