Configuring Universal Inbox -- Sample Workflow files missing.

hi,
On page 156 of the "Siebel Applications Administration Guide" for version 8.0 in the bookshelf, the following was mentioned. But in my sample applicaion installation I could not find any of these sample workflow xml files. Is anybody out there able to locate these sample workflow files ? Or if you have some samples that can be shared on working with the Universal Inbox ?
Where to Find the Sample Workflow Files
These sample workflows are provided as part of the sample database installation. You can find these
workflow files in the SIEBEL_CLIENT_HOME\SAMPLE\WORKFLOWS directory. (For example, C:\Program
Files\Siebel\7.8\web client\SAMPLE\WORKFLOWS)
The names of the files that contain the sample workflows are:
■ Inbox - Service Demo Creation.xml
■ Inbox - Service Action.xml
■ Inbox - Service Detail Action.xml
Thanks
S

I received the 3 sample WFPs from someone this morning. This question can be closed now.

Similar Messages

Measurement and Automation Explorer (MAX) configuration export and import fails, files missing

<I don't see a board for MAX so I posted it here. I hope you don't mind.>
I am trying to migrate to a new computer and have successfully moved the LV code but it relies on the configuration setup in MAX to operate. There are many configuration items includes hardware configurations, scales, etc. I have LV 6.1 on Windows XP and MAX v 3.1.1 on both machines. When I export all data from computer 1, I end up with an NCE file. This file is binary. I've tried exporting to text format but have not succeeded.
When I try to import on computer 2, first MAX reports "Can not find RTE directory: C:\WINDOWS\system32\cvirte". This seems weird since I didn't install LW/CVI when I installed LV. I click OK. I then get "Unable to open c:\program files\national instruments\max\bin\cvirte.rsc". I click OK. I then attempt to import the data from the NCE file but get "This wizard does not recognize the specified configuration file."
I tried installing NI System Configurator v5.5.1f0 but get the same results.
How can I safely migrate the MAX configuration data?

Yes, MAX is also installed with the motion controller driver.
NI-DAQ 6.9.2 is over 10 years old. I simply don't remember what issues it had, sorry. Version 7.4.4 was the latest for XP. Perhaps that works better.
And the cvirte was required for some of the MAX features. It should have been installed automatically.

Flight Finder XSQL servlet Sample Code Files Missing

Hi,
Just downloaded fly.zip and extracted 26 files, but could not find either xsql-wtg.bat or the Release Notes in xsql\doc directory as noted in the readme.html
Am I high and miss something here???
JF Kotas
Boeing

Downloaded XSQL servlet files and all is well...thanx.
Guess I was high!
jfk
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Robert.Hall:
JF Kotas,
The files you mention are included with the XSQL Servlet, which is a separate download. There's a link to the appropriate OTN page in the Required Software section at the top of the readme file.
The URL is: http://technet.oracle.com/tech/xml/xsql_servlet/index.htm
If that doesn't work, please let me know.
Thanks,
-rh
[email protected]<HR></BLOCKQUOTE>
null

SetWlstEnv.sh file missing in weblogic while configuring OVD

Hi ,
I am performing standalone OVD installation.I am facing exception while running post upgradation steps after the upgrade
Steps Performed
1-Installed weblogic server 10.3.2.0
2-Oracle jrockit(R) (build R28.2.5-20-152429-1.6.0_37-20120927-1915-linux-x86_64,complied mode)
2-installed OVD 11.1.1.2
3-Upgraded weblogic server 10.3.6.0
4-While running post patching steps for weblogic for upgradeJRF,upgradeOpss i am facing exception while running this .Later i could find that setWlstEnv.sh file missing
How can i get this script (setWlstEnv.sh) is their is any other way of recreating it .Or do i need to perform any other steps to get this file or is it a product based weblogic bug.
Quick Response would be appreciated .
Regards,
PraveenSharma

user489948 wrote:
<Sep 6, 2012 10:50:21 AM EDT> <Info> <Management> <BEA-141223> <The server name bi_server1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.>The above message suggests that there is no managed server called bi_server1 configured on that WLS, but only an AdminServer.
If I try to start a non existing managed server (bi_server2) the same way I get:
+<Oct 10, 2012 2:07:52 PM EEST> <Info> <Management> <BEA-141223> <The server name bi_server2 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer,bi_server1}.>+
You can check what is configured in your domain by reviewing <DOMAIN_HOME>\config\config.xml file (look for the <server> tags) but I think you have only
+<server>+
+<name>AdminServer</name>+

I want to configure per-app vpn . can i get a sample mobileconfig file

how do i configure or make a payload for per-app vpn configuration. can someonw provide me with a sample mobileconfig file please

sorry couldnt find any way to appeand info to my qt hence adding in reply:
my problem is similar to the one discussed in this forum https://forums.openvpn.net/topic13887.html

Configuring Oracle Payments Sample Servlet-where to find configuration file

Hi,
We are using Oracle EBS R12.1.3. We are configuring Oracle Payments Sample Servlet as per below mentioned steps
1. Add the alias statement to the configuration file of the servlet zone you wish the sample servlet to run as specified in the orion-web.xml file which is in the following directory:
$ORA_CONFIG_HOME/10.1.3/j2ee/oacore/application-deployments/oacore/html/
Alias statement->
servlet.oramipp_lop.code=oracle.apps.iby.bep.loop.LoopBackServlet
Note: This line should already be in the properties file after you
have installed Oracle Payments. You only need to verify that it
exists.
2. In the same configuration file, provide the following servlet zone-wide parameters listed in the table below, which are set by a statement of the form servlet.default.initArgs=.
Zone-Wide Parameters
Parameter Example Value Description
errorfile tmp/error.log Debug file used to write errors and stack traces.
debugfile tmp/debug.log Log file used to write debugging messages.
debug true, false Turns debugging on or off.
Where can I find configuration file and properties file to make change?
Regards
Deepak Gupta

Thanks Kris!
I messed with the wrong file to put JDK in Path :)
I Post here just in case someone may need it:
As root user:
gedit /etc/bash.bashrc
at the end of the file insert (eg. /opt is where JDK directory is installed):
JAVA_HOME=/opt/jdk1.5.0_06
CLASSPATH=.:$JAVA_HOME/lib/tools.jar
PATH=$JAVA_HOME/bin:$PATH
export JAVA_HOME CLASSPATH PATH
Thanks again for your reply

Configuring universal worklist for SAP workflows

Hi All,
How to Configure Universal Worklist for SAP Workflows....could you please tell me the configuration steps in Portal and please tell me required Transaction codes to configure in SAP R/3 side for configuration of UWL....
This is urgent.....
Really i appreciate.
Thanks and Regards,
Abhi.

Hi Abhiram,
u cn refer to these links.......its of very use to u.......
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/c223be82104792a15c2df11377b9ed/frameset.htm
How configure UWL in Portal 7.0
configuring the Universal Worklist
Problem configuring UWL
Regards
Bhargava
points are welcome

OWF Builder - Sample Workflows

Hi,
I am totally new to Oracle Workflow and just installed the Oracle Workflow Engine on Oracle 10g Database. Also managed to get the Administrator's and User's Web based consoles configured.
Now I'm tiring to work with OWF Builder. OWF Builder was configured to get connected to the database. There were some sample workflows that could be loaded from the DB to the OWF Builder. But the code implementation is not there. Can anyone please explain a simple workflow (with 3 or 4 process nodes) with the code implementation, so I will be able to get an idea of the codes and node setup?
According to what I understood, in OWF Builder, the graphical nodes are used to represent the transfer of parameter/s from one node to another. But to implement the functionality of process node, one has to write codes with Java or PL/SQL. Please verify whether I am correct or not?
Thank you.
Best Regards,
Shanaka

Hi,
Well the best way i can suggest is to download this sample "Leave Approval" workflow from my website:
http://yuvi.esmartdesign.com/index.htm
Explanation:
This WF is a simple Leave Approval workflow that sends a simple leave notification to the approver, requesting him/her to approve the leave for a specific duration. The leave can be either approver or rejected. Once the leave is approved/rejected, a notification reaches the mailbox of the requestor in Apps.
This is a very simple WF with only three activities namely:
NOTIFY_APPROVER
NOTIFY_REQUESTOR_APPROVE
NOTIFY_REQUESTOR_REJECT
All the notifications have messages attached to them. In case if the Approver takes no action, by default the leave is APPROVED.
Hope this is clear and simple to understand.
{This workflow file shall be available on my website only for a small duration}
Pointers:
Check the "Oracle Workflow" section under the "Downloads" category in my website.
HTH,
Nitin

I received a gift card and when I redeemed it an error message said that I had some itunes files missing and that I needed to reinstall itunes. Will I still have all my credits when I download itunes?

I received an online gift card for Father's Day. When I tried to redeem the gift then I received a error message saying I had some itune files missing and I needed to reinstall/download itunes. Will I still have my previous purchase credits after downloading and reistalling itunes?

You will, because the credited funds are on your iTunes account, not the application. When you reinstall iTunes just configure it with your old iTunes account and your credits will be there waiting for you.

The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.

If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

[svn:osmf:] 14905: Adding file missing from previous commit.

Revision: 14905
Revision: 14905
Author:   [email protected]
Date:     2010-03-22 05:37:59 -0700 (Mon, 22 Mar 2010)
Log Message:
Adding file missing from previous commit.
Added Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/Standard0755.swf
    osmf/trunk/apps/samples/framework/OSMFPlayer/src/assets/fonts/readme.txt

If you're confident that the DP contains the new file, try deleting the deployment and re-doing it (not the deployment type - just the deployment to your test collection).
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Enterprise manager configuration error: error instantiating OC4J Files

Good day to all.
Its my first time to install Oracle 11g on my Windows 7 computer.
After i installed and configured the database, i get this following error , so i can't go through the Enterprise Manager.
Enterprise Manager Configuration failed due to the following error - Error instantiating OC4J Configuration files
So i checked the emConfig.log for error details, and i found out that i have some several files missing, in which i checked the folder also.
I don't know why these files are missing.
Jun 5, 2012 4:32:53 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml in searching for tag jms-server with attribute port
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\jms.xml (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at java.io.FileReader.<init>(FileReader.java:41)
     at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:296)
     at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1297)
Jun 5, 2012 4:32:53 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml in searching for tag rmi-server with attribute port
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\rmi.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
Jun 5, 2012 4:32:53 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml in searching for tag web-site with attribute port
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\http-web-site.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.util.FileUtil setAttributeInXML
CONFIG: Stack Trace:
java.io.FileNotFoundException: C:\app\ROMMEL\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\server.xml (The system cannot find the file specified)
     at java.io.FileInputStream.open(Native Method)
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.EMDBCConfig instantiateOC4JConfigFiles
CONFIG: Failed to set value in server.xml for application-server tag
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating OC4J configuration files
Refer to the log file at C:\app\ROMMEL\cfgtoollogs\dbca\RommelDB\emConfig.log for more details.
Jun 5, 2012 4:33:57 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error instantiating OC4J configuration files
     at oracle.sysman.emcp.EMDBCConfig.performConfiguration(EMDBCConfig.java:427)
     at oracle.sysman.emcp.EMDBCConfig.invoke(EMDBCConfig.java:174)
IT seems that the folder OC4J_DBConsole\config\ does not contain any xml files.!
Prior to this, i get some files that are not found error when running the SETUP, there are several of them, i just pressed CONTINUE in
order to finish the installation.
Hope anyone can give me a good advice and help so that i can start to run Enterprise Manager and to learn how to get around with database creation and configuration
Im a total newbie in Oracle, so any help would be greatly appreciated.
Thank you very much.

Hello.
I have successfully installed Microsoft Loopback adapter.
I checked out the installation logs in the Logs directory, i can the error log (oraInstall2012-06-05_12-36-49PM.err) . which contains many errors:
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup12.jar (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup5.jar (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Users\ROMMEL\AppData\Local\Temp\Temp1_win64_11gR2_database_1of2.zip\database\stage\Components\oracle.ctx\11.2.0.1.0\1\DataFiles\filegroup19.jar (The system cannot find the path specified)
AND lots of .jar and .rsf files missing.
What should i do next?
Thank you.

Major files missing in Logic Pro X

Whilst making a track I decided to save my work before playing what I had created; but when it came to playing it there was no sound. I chose to quit the program and open the application again when it asked me to search for missing files, it did this for every audio file on the programme. When I loaded up my project again there was still no sound being produced. I went to check why no sound was being produced and it turns out that all of my instruments, synthesisers, samples, mp3 files, etc had gone missing. I have no idea where these files are right now as I can't find them in finder. Any help to locate these files and restore my projects / logic pro x would be much appreciated.
(I checked whether I had to install the sounds again but it says that I have already installed them)
Thanks : )

Hi Erik!
Is it me or has there recently been a sudden increase in this sort of problem (Where some people are finding that Core Audio deselects itself for some reason)?
Any idea of what might be causing this as I'm not seeing such behavior here.... and Im having a heck of a time trying to recreate it?
Cheers..
Nigel

WLC Custom Web Auth Bundle sample .tar file is not on WCS

The WLC documentation would make it appear (or maybe previously) you should download a sample web auth bundle code from the WCS Templates. I was never able to find a sample .tar file on the WCS 7.0.172.0 templates.
However I found on Cisco.com under Support > Downloads > Products >Wireless> Wireless LAN Controller Standalone Controllers> Cisco 5500 Series Wireless Controllers > Cisco 5508 Wireless Controller > Wireless Lan Controller Web Authentication Bundle-1.0.2 > webauth_bundle-1.0.2.zip
It was updated in June 2011, some pretty good sample html code.
The readme.html in the sample webauth_bundle-1.0.2.zip file has been very helpful , almost as good as the suppport community web page on custom web auth.
https://supportforums.cisco.com/docs/DOC-13954

WCS config guide 7.0.172 is correct
http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/temp.html#wp1129979
The bundle in WCS is downloaded through :
configure->controller
"select a command"-> download customized webauth bundle.
Just tested it and it was there.
The one on cisco.com is better though

File missing in petstore1.4

Hi all,
i unzipped the sample bundle of j2ee1.4 but i got an error while doing asant in the samples/bluprints/petstore1.4/src folder as the instructions say. The error is about java.io.FileNotFoundException: samples/common-ant.xml (No such file or directory). And also sample/common.properties file is missing.
Can anyone explain me why are these files missing?
Thank you all.

Hi luker,
I think the easies way is to copy the entire samples directory to the following folder, c:\Sun\AppServer\samples or any location that you installed the Sun application server. The missing files is at that location. The problem happens because we install the application server and the sample bundles separately and unfortunately we don't have any file mention this problem.
Tell me if it works luker
Regards,

Configuring Universal Inbox -- Sample Workflow files missing.

Similar Messages

Maybe you are looking for