Configuring using AAEI have been going through the following document. http

I have been going through the following document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?quicklink=index&overridelayout=true
1. I have a JMS to Proxy scenario async. How do I make this scenario configured using Integrated configuration in 7.11 using AAE to improve the performance of this scenario?
I know it is not supported by Proxies?
Plz let me know the steps required for the same?
2. I have a file to Proxy scenario - Async. Can I configure the same using integrated configuration scenario?
Thanks
~N

Hi
Please check the following links for AAE with proxy
ABAP Proxy sender possible in integrated configuration AAE with PI 7.11
/people/makoto.sugishita/blog/2009/10/23/a-new-feature-in-netweaver-pimessage-protocol-xi-30-in-soap-adapter
Regards
Abhijit

Similar Messages

Using axbridge.dll without going through the JRE installation process

I've searched the web and this forum for this specific problem, and have found related items, but nothing that quite answers the question.
I have an application that uses the JRE's axbridge.dll to access a DLL created from a Java bean. I used the packager to create a DLL named MyBean.dll.
When I go through the full JRE install, everything works great. That is to say, when I execute Sun's JRE installation program and go through the normal install process, I can access the bean through MyBean.dll without any problems.
I am accessing MyBean.dll from a Visual Basic 6.0 application. Converting to VB .Net is NOT an option at this time. The VB app uses MyBean.dll for a critical part of the application.
It is my understanding that it is not strictly necessary to go through the full JRE installation process. Simply deploying the JRE by copying its directory (and all subdirectories) to your application's directory structure should be sufficient. This would be HIGHLY desirable for my application. In fact, if I can't do this, it may be a show-stopper.
When I install my application in this way (i.e, by simply copying the JRE instead of "installing" it) it doesn't work at all. I immediately get an error saying that the executable "has encountered a problem and needs to close. We are sorry for the inconvenience" and a dialog is displayed offering to send the problem information to Microsoft.
The details indicate clearly that the problem occurs in the axbridge.dll, version 1.4.2.60.
1. Any ideas on how to get the axbridge.dll to work without going through the full JRE install?
2. Are there any alternatives to using the axbridge.dll to get my VB app to be able to use the Java? Remember, it is VB that must call the Java, NOT the other way around.
3. Is JNI an alternative? If so, can I use JNI to get VB to use Java, or do I have to write the DLL's in C++?
Any help you can give would be VERY MUCH appreciated.

I'm also on a JRE installation problem with the bridge.
Here is a regmon extract on excel using a dll that uses a java-packaged dll from the bridge:
5229 5.69504923 EXCEL.EXE:2364 QueryValue HKCR\CLSID\{9DD49FCD-BB61-414E-88C8-E6F5B35AEDCB}\InprocServer32\(Default) SUCCESS "C:\win32app\Specific\jre1.5.0_05\bin\axbridge.dll" << The axbridge dll in a specific location
5271 5.70646800 EXCEL.EXE:2364 QueryValue HKLM\SOFTWARE\JavaSoft\Java Plug-in\1.5.0_05\JavaHome SUCCESS "C:\Program Files\Java\jre1.5.0_05" << an installed JRE 1.5.0
This is confirmed with process explorer : excel is using "C:\Program Files\Java\jre1.5.0_05\lib\rt.jar" and not "C:\win32app\Specific\jre1.5.0_05\lib\rt.jar"
In other word, the axbridge check for its installation location in the registry to know where to start.
Even if all your components have been updated in the registry as suggested here : http://forum.java.sun.com/thread.jspa?forumID=40&threadID=559704
JRE Bug or feature?
Anyway the registry is evil.

How can I attach a photo to an email,using Photoshop Elements9,without going through the Revel cloud

How can I attach a photo to an email using Photoshop Elements 9, without going through the Adobe Revel cloud?

Adobe user wrote:
I'm using Windows 7. I have no email clients.
You don't need an Email client nor Adobe Revel account to send email and photos as attachment. All you need is an email account (could be free web-based account such as Gmail, Outlook, Yahoo, AOL or whatever including from your own ISP. And of course an Internet Connection.
Now the most obvious requirement is out of the way so you need to go in to your Organizer and click on Share button and choose Photomail. Select the photo you want to send and follow the instructions that are on your screen.
You also need to request an Adobe Verification Code to enable you to use Adobe's Mail Servers to send the photos for you. To do this go to:
Edit >> Preferences>> Sharing
Look for something like this and fill out the red boxes where indicated (click on this image to see it clearly).
Hope this gets you started.

I have Windows 7, 64 bit, and I am using iTunes 11.0.1.12. I have been all through the threads and internet..how do I delete songs from my iTunes and hard drive at the same time? I have my music in the correct iTunes folder. Nothing works.

Windows 7 64 bit
iTunes 11.0.1.12
I have my music in the correct iTunes folder
In iTunes, I select songs, click "delete", then "move to recycle bin", finally, empty my recycle bin that shows the file is there
File is still on my hard drive.
I just want to be able to delete files out of my library and off of my hard drive at the same time. I have tried everything I have read, and there really seems to be no real answer. Somebody please help!

Tarantulaman wrote:
i do, but like i said it fell once and since then it hasn't been able to connect to my laptop. it acts like nothing's connected. i believe if i call the company the HDD is from they'll be able to transfer it to a new one but who knows how much they'd charge. looks like i have no choice now.
If it were truly a backup, then the media would play on the laptop as it would be on the laptop.
Sounds like you actually do not have a backup, instead you chose to keep your media on an external drive.
Regardless of where the media is stored, it's always a good idea to have a backup for instances like this.

When I try to view the IDVD tutorials, I get a message that says: The video cannot be found. It may have been removed from the server. HTTP 404. What do I do?

When I try to view the tutorials in IDVD, I get the following message: "The vodeo cannot be found. It may have been removed from server HTTP 404" What do I do?

You don't say what version of iDVD you are using, nor what link you were using, but try these:
A good guide to iDVD 7 can be found here:
http://www.kenstone.net/fcp_homepage/idvd_07_stone.html
Apple's tutorial on iDVD 07/08 is here:
http://manuals.info.apple.com/en/idvd_08_getting_started.pdf

What programs have been adapted to the retina resolution

I finally got my macbook pro retina in the mail yesterday after waiting 3 weeks. Now I am setting up my computer and I notice that most of them look terrible on this display, and I was wondering If anybody has a list of which programs have been optimized for the new resolution.

http://forums.macrumors.com/showthread.php?t=1397367
slightly different but same model.
What changed? DDR3, Westmere Nehalem Xeon. But with 8-core 3GHz you are set and there never was much if any in cpu upgrades.
Keep your eye on the 8800GT of course, there are only a couple graphic card upgrade options but it will accept the same as newer Mac models. and keep the RAM (FBDIMMs) down to and below 70*C - monitor the sensors with Hardware Monitor (best) and boost the fans default speed from 500-600 up slightly to higher base of 800 rpm to improve airflow.
It is still a good solid unit. Protect it. Use a 850W UPS and it should serve you and run well. The ideal RAM configuration is to use all 8 RAM slots the combination of sets should not matter. 8x1GB or mix of some paired 2x2GB or you can use 2x4GB DIMMs as long as they are Mac Pro certified and have the large RAM heat sinks.

Diagnostics Test: No Groups have been registered for the Advance Test

Hi
recently I had refershed my Devlopement from production. When i used to launch the diagnostics tools. No goups were found for all modules.
It worked before.
No groups were found and messege given below was appeared.
<strong>No Groups have been registered for the Advance Test
</strong>
Could you help me out on this issue.
Do i need to set any parameters like wrapper.classpath in jserv.properties.
Thanks in Advance.
Tokala
Edited by: neosatish on Oct 29, 2008 9:53 AM
Edited by: neosatish on Oct 29, 2008 10:47 AM

Please refer to the following notes:
Note: 402987.1 - Oracle Diagnostics: No Groups have been registered for the Advance Test
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402987.1
Note: 235307.1 - E-Business Suite Diagnostic Tools FAQ and Troubleshooting Guide for Release 11i and R12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=235307.1

Printer rips through the whole document before it starts to print

Thank you everyone for the answers to my previous post. Another Postscript problem which we are now trying to solve,
is the following printer behaviour: getting our postscript datastream, printer first goes through the whole document,
ripping every page (or so it seems) and only then it starts printing the first page and further. Our datastreams are usually
large, tens thousandth of pages, so it takes very long before a printer starts to print. What could cause such a behaviour?
Something at the end of the file, which interpreter needs to take into account? Some special settings at prologue?
Thank you in advance for your help,
Yuliana

What you describe is not normal behaviour for PostScript implementations and is not something that is a feature of the PostScript language. The interpreter does not attempt to process the entire job prior to passing any of the rendered pages off to be imaged.
You give no idea as to what type or brand of PostScript printer is exhibiting this behaviour, but the behaviour is likely type and/or model and/or vendor-specific. Contact the technical support group for your printer or RIP vendor for specific answers to this question.
- Dov

HT204380 I have done all the above. I am in Germany using an iPad 2, trying to call an iPad 2 in the UK. My IPad goes through the call and then times out. I have been on the phone to the receiver at the time so know they had their iPad on.

I have done all the above. I am in Germany using an iPad 2, trying to call an iPad 2 in the UK. My IPad goes through the call and then times out. I have been on the phone to the receiver at the time so know they had their iPad on.

What do you mean that you can't "call" an iPad in the UK?? That doesn't particularly make sense. You can email to an iPad or text them, but the iPad is not a phone, so how do you expect to "call" them??
Hope this helps

The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In atte

My home wireless is no longer recognized, even going through the set-up process. It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car. In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

Maybe not too late to help you.
For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
HTH.

Help help please...Photoshop CS, on a Windows XP machine. After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this p

Help help please... I'm running Photoshop CS, on a Windows XP machine. After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To continue using this product I must re-activate it". BUT the activation link informs me that they no longer support the product (neither online nor telephonically). So how can I re-activate this software?

Hello Helios & Eb29075,
+1. Please check log file for error message.+
+2. Check status of EM.+
+3. Please see:+
+How To Drop, Create And Recreate DB Control In A 10g Database [ID 278100.1]+
+Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole__ not found [ID 555218.1]).+
As you said above, yes, I did find OC4J config issue & EM Config issue and resolved them. But still I couldn't get my DBConsole started.
Yes, I was able to drop DBConsole<sid> service using 'emca' repository drop. But, when I started recreating repository for DBConsole service, I wasn't able to do it. I tried several times but in vain.
Thanks,
A.P.

I am trying to email pictures from my ipad to my email address on my computer and I have been going along nice but now I get a message that says "cannot send mail the message was rejected by the server" can't see to figure out why it stopped sending now.

I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server" cannot understand why this is happening and have not been able to fix. Now when I try to send pictues even to another email address I am getting the same message.
Help.

Email may not be the best way to move pictures.
There are lots of ways of moving files.
A simple and popular way to copy files and share files among your devices.
https://www.dropbox.com/
"Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
https://www.box.com/
Using iTunes to transfer files:
http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares) protocols"
https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
Windows File server
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
"The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance." " Includes choice of private cloud on-premise."
http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11

I have tried loading 3 different cds that I just bought into Itunes and I click the import cd button and it goes through the motions of importing the cds, but when I go to my library none of these cds is there. Help, please!

I have tried loading 3 different cds that I recently purchased into Itunes. I click the import cd button and Itunes goes through the motion of copying and importing the cds, but the songs are not in my music library. I have searched everywhere to find where these cds might be, but to no avail. Could really use some help here. Never used to have this problem.

Are they in the relevant artist & album folders when you look via Windows Explorer. If so something may have gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem.
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
tt2

I use light room on both my desktop and laptop, syncing catalog via google drive. I have been working on the desktop all week, editing a collection in lightroom. this morning i opened the program however to find only an old version of the catalog. All wor

Hi all
So I have lightroom on both my laptop and desktop and sync catalog through google drive.
I have been working on the desktop all week on edits of high res scan in lightroom.
Today i opened the program to find everything i have done for a week isn't there.
Help.
I feel it has synced to the last time i opened on my laptop and lost what ive on on the desktop.
any help much appreciated.
p

I have no idea what happened, why you are seeing what you are seeing.
My only guess at finding the missing work is to look under File->Open Recent on both computers.
I do know that if you aren't making regular backups of your catalog file, and relying on synchronizing catalogs from one computer to another via the cloud, you are living very dangerously, and now you are possibly going to pay the consequences of not making regular backups.

Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

The power button for the Trackpad is on the right hand end of the battery case. Press that button to initiate the pairing process. On the top of the Trackpad just above the power button is a tiny green light (you probably cannot see it unless it is lighted). That light will indicate ehther or not the Trackpad is discoverable. If the Trackpad has discoverable the green light will blink on and off. If it does not pair within 3 minutes you will have to press the power button again to re-initiate the pairing process. Once your Trackpad has paired, you can just leave it on and it will pair automatically when you reboot your Mac.
If you are having problems pairing, try turning off any other Bluetooth devices within 30 or so feet of your Mac mini. That includes other Computers, iPhones, iPads, etc. that may be in the area. Once your Trackpad has pairedwith your mini, you don't have to be concerned about other Bluetooth devices.
One other hint, I find that although the Wireless Trackpad does not eat batteries as fast as the Magic Mouse it still uses more than the Wireless Keyboard. It is a good idea to keep a supply of AA batteries around. I have used Apple's Rechargable batteries, but found they did not last that long before needing to be recharged. I have had the best battery life from Duracell Quantum batteries.

Configuring using AAEI have been going through the following document. http

Similar Messages

Maybe you are looking for