Configuring Windows with Afaria

Hi,
we would like to configure Windows (not Windows Phone!) devices with Afaria channel scripts. Configuring the WiFi connection interests us in particular. Has anyone done this or know any helpful documents?
Thanks!
Daniel

Hi Vivek,
I have done this once in my project. Ensure you have the correct authorizations and while installing/connecting to AD, you get the following screen. Enter your LDAP Server details like LDAP://0.0.0.0:389 and enter the UN and Password ( preferred to have a service account to validate the user login / admin authorizations as per your requirements)
Click on Yes and continue. See if this works.
Regards,
Nagesh
Message was edited by: Nagesh Caparthy

Similar Messages

Problem in configuring windows in FPM

Need Suggestions to configure windows with message types with FPM

Hi,
Reas this document u will have a nice idea about FPM.
[All abt FPM|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0a2b7c2-1598-2e10-45bc-c556df3b9576]
Karthik.R

Virtual PC / XP Mode Error outs with Required configuration: - Windows must be configured in mode 800x600 minimum - Windows must be configured in mode 'true colors'.

Hello,
I am running Application using XP mode and Virtual PC on Windows 7. I have 8 GB RAM and more than 300 GB free disk space. When I launch application in XP, I receive following error
Required configuration:
- Windows must be configured in mode 800x600 minimum
- Windows must be configured in mode 'true colors'.
My screen resolution is 1024
× 768
and I do not see any other options to resolve this problem.
Any guidance is greatly appreciated.
Ganesh

This is a thread that discusses your problem.
https://social.technet.microsoft.com/Forums/windows/en-US/12a17fa5-ddab-4480-8973-1a13bfb2e8fd/need-more-than-16bit-color-depth-on-windows-xp-mode?forum=w7itprovirt
Your app is probably calling for 32-bit color, and XP Mode with
integration features doesn't support that. There's 3 ways around it.
one, is to enable remote desktop in XP Mode and connect to the VM with
remote desktop.
2nd is to turn off the integration features and then you can set the XP
Mode desktop to 1024x7687 and 32-bit color
and 3rd, if you app supports 24-bit color, there's a registry hack to do
it. It's in the thread I posted above.
Bob Comer

TX2Z with Windows 7 stuck on "Preparing fo configure Windows"

Hi,
New here and have the TX2Z for just 2 weeks. Boot up the laptop this morning and screen is stuck with this message of "Preparing to configure Windows. Do not turn off computer" . I though tried pressing ctrl + alt + del but nothing.
Thanks in advance for the help

satellite laptop l745d-s4320 Psk16u - 009001
Satellite L745D-S4230 (PSK16U-009001)
when opening my laptop it is always stuck on starting windows screem ( the screen with windows logo )
You need to reach the recovery environment.
What are the system recovery options in Windows 7?
When you get there, try a Startup Repair. Sometimes it takes several tries.
If that doesn't work, do a System Restore.
And there are other things to try as well.
-Jerry

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step.

Orion on windows with ASM configuration

Hello,
can someone tell how to run orion on Windows where we have ASM file configuration.
oracle version: 11gR2
windows 2008
I see in the documentation how to run orion from Linux, tried the same logic but didn't work.
could someone give an example?
Thanks a lot...

Hi Murali,
I am trying to configure ASM with ASMLib I/O.
As you told for modifying ASM_DISKSTRING,first asm instance should be installed right?
the steps i followed so far are,
i installed oracle 10g (software only)
installed asm packages
configured and created disks VOL1
disk ownership is changed to oracle user and oinstall group
# /etc/init.d/oracleasm createdisk VOL1 /dev/sdb1
etc
Now again i started universal installer for installing asm instance wher i am facing issues..Is the steps i folled is curruct..or can you you advice me some useful notes on this..

How to configure Windows server 2003 with WebDav

Can anyone advise on the best way to configure Windows server 2003 with WebDav so I can get the likes of some of those Apps such as PDF Expert and GoodReader to see the folders.
I have installed the necessary services and on a Windows PC and can browse to the URL OK which lists the files (setup using a Virtual Directory).
When I tried using this with GoodReader/PDF Expert, it could not find the server in question.
Can anyone help me?

Hello，
Please make sure you have checked "anonymous users" on receive connector.
Do you mean you can't send an email to external email address? If so, please post the detailed NDR information.
Please use get-receiveconnector | fl cmdlet to check your receive conenctor configuration.
Cara Chen
TechNet Community Support

10g - how to configure sso with iis-

hi, experts, I have followed Oracle® Business Intelligence Enterprise Edition Deployment Guide to configure SSO with IIS.
but I always meet this message.
Not Logged In
You are not currently logged in to the Oracle BI Server.
If you have already logged in, your connection might have timed out, or a communications or server error may have occurred
what steps are missing?
how to check?

hi, experts,
I checked C:\OracleBIData\web\log\sawlog0.log on the obi server (windows server 2003 standard).
at Thu Feb 17 14:48:46 2011 , I logined OBI on another machine (not via the browser on the obi server).
however, the log shows the login user is the administrator of the obiserver (obiserver\administrator ).
any setup on IIS are wrong? thank you very much!
=========================================================================================
Running job 'MinutelyMonitor' took 7422 milliseconds, 12.3% of job's frequency (60 seconds).
Type: Error
Severity: 40
Time: Thu Feb 17 14:48:46 2011
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-1796
Location:
     saw.odbc.connection.open
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for obiserver\administrator in repository Star: invalid user/password. (08004)
Type: Error
Severity: 42
Time: Thu Feb 17 14:48:46 2011
File: project/webconnect/connection.cpp Line: 276
Properties: ThreadID-1796
Location:
     saw.connectionPool.getConnection
     saw.subsystem.security.checkAuthenticationImpl
     saw.threadPool
     saw.threads
Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
---------------------------------------

Problem with Afaria and LDAP user authentication in Android device

Hi all,
I have a server with Afaria 7 (SP4, hotfix3) installed. In this Afaria there is a tenant (system) without LDAP/AD integration working correctly. I need to have other tenant with LDAP integration in which the users must be authenticated.
I know that for iOS devices is necessary reinstall the iphoneserver selecting "Afaria Server managed authentication" but at first I want to make run the Android devices. For this reason I don't do this yet.
I follow the next steps:
1-Create a new tenant
2- Configure LDAP integration
3-Create a inventory policy with authentication required
4-Create a static group associated to the inventory policy
5-Create a enrolment policy associated to the static group.
When I launch the Afaria agent on the device, the user/password parameters are required. After fill the user/password parameters, the device connect to the server and then is show the message "user or password incorrects".
I have seen the log and seem the problem is that Afaria can't authenticate this user.
I validate that Afaria can "see" the LDAP users creating a user group that contains this user(JimenM99)
The problem is autentication, because if I remove "autentication required" of the inventory policy, the device enrol correctly.
Could you please help to solve this problem?
Thanks in advance.

Hi all,
I have a server with Afaria 7 (SP4, hotfix3) installed. In this Afaria there is a tenant (system) without LDAP/AD integration working correctly. I need to have other tenant with LDAP integration in which the users must be authenticated.
I know that for iOS devices is necessary reinstall the iphoneserver selecting "Afaria Server managed authentication" but at first I want to make run the Android devices. For this reason I don't do this yet.
I follow the next steps:
1-Create a new tenant
2- Configure LDAP integration
3-Create a inventory policy with authentication required
4-Create a static group associated to the inventory policy
5-Create a enrolment policy associated to the static group.
When I launch the Afaria agent on the device, the user/password parameters are required. After fill the user/password parameters, the device connect to the server and then is show the message "user or password incorrects".
I have seen the log and seem the problem is that Afaria can't authenticate this user.
I validate that Afaria can "see" the LDAP users creating a user group that contains this user(JimenM99)
The problem is autentication, because if I remove "autentication required" of the inventory policy, the device enrol correctly.
Could you please help to solve this problem?
Thanks in advance.

New browser window with javascript

Hello,
I'm trying to accomplish something similar to what has been
discussed in other threads (Jess Learnin, 9/30/2008, and another
thread from back in '07). I've tried the advice given in these
threads and have had no luck. I would like to create a button to
call a new browser window that displays a URL of my choosing. I'd
like to specify the size and attributes of the new window. I've
created a small dummy tutorial in order to work on this feature.
I'm using the "Execute Javascript" option when configuring
the button. I include the following javascript:
window.open('
http://lib.berkeley.edu/BIOS/index.html',
'myWindow','height=400, width=700, toolbar=no');
I have the Captivate button context set to "Current". I have
deselected "Continue Playing Project" (though I've tried it with
that option selected as well).
I've tried prefacing the script w/
"javascript:window.open...", but no luck.
I'm testing the file on a development server, rather than
from a local copy. When I test in Firefox, my movie simply stops
when I click the button, without opening a new window or loading a
web page. When I test in IE7, the movie stops and I get a message,
"Error on page"; still no new window.
I do notice that I'm currently running Flash Player 10. I'm
using Captivate 3. When I publish my file, my options only go up to
Flash Player 9, which is what I have chosen. I don't know if this
would make a difference.
I have also tried altering the standard.js file in the manner
that jbradley88 suggested in the 9/30/08 thread, and using the
corresponding javascript in the button properties window, with
similar unsuccessful results.
I have tried running the movie on a different computer, in
case some local setting was somehow mucking things up. I get
nothing.
Any suggestions? If anyone's willing to take a look, I can
send along my small dummy .cp file that I've been working on.
Thanks in advance.
-Kelly

Hi John,
Here's the exact javascript that I currently have associated
with the button:
void(window.open('
http://lib.berkeley.edu/BIOS/index.html',
'myWindow','height=400, width=700, toolbar=no'));
I've tried multiple permutations, including placing
"javascript:" in front of the script, both with and without the
void().
The message in IE7 just says "Error on page". It's not a
pop-up message; it's just the small message that appears at the
bottom left of the browser window in IE7 when a page fails to load
properly. The message doesn't appear until I click on the button
that's supposed to call the javascript. There's a yellow
exclamation point icon that appears next to the "Error on page"
message. When I click on that I get:
"Problems with this Web page might prevent it from being
displayed properly or functioning properly. In the future, you can
display this message by double-clicking the warning icon displayed
in the status bar."
It also displays a pointer to the error:
Line: 1
Char: 111
Error: Syntax error
Code: 0
URL:
http://library11.berkeley.edu/bios/kelly/Practice_demo.htm
I looked at the source for the page as displayed by IE7 (have
also looked at the .htm and .js files generated by Captivate) and
haven't seen anything obvious, but I'm somewhat unschooled in such
matters.
If it would help to see what it does, you can view the demo
at the URL above.
Thx again,
Kelly

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

When one window containing 1 tab is closed, the other window with several tabs closes also

I have a set of web pages that reproducibly causes Firefox to act incorrectly. When Firefox is first started I click the "Restore previous desktop" button. Then I have 2 Firefox windows. The first to open has 6 tabs; the second has 1 tab. When I close the 2nd window (with 1 tab), it also closes Firefox completely with no error message. When I run Firefox again, "Restore" creates both windows exactly as they were before.
I don't know yet if the actual URLs make a difference, but here they are anyway:
'''''Window 1:'''''
https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false&continue=https%3A%2F%2Fmail.google.com%2Fmail%2Fu%2F0%2F%3Fshva%3D1%26ui%3Dhtml%26zy%3Dl&bsv=llya694le36z&ss=1&scc=1&authuser=0&ltmpl=default&ltmplcache=2&from=login#inbox
http://branamsmile.com/gum/?gclid=CLepiIaAhqkCFVJ25QodSyk1nw
http://www.google.com/search?hl=&q=root+viewsonic+g+tablet&sourceid=navclient-ff&rlz=1B3GGLL_enUS412US412&ie=UTF-8&aq=0&oq=root+viewsoni
***** NOTE THIS TAB IS PROBLEMATIC *****
When I press Alt+D, Ctrl+C, and Ctrl+V it into this comment box, I get
'''woot'''
When I look at the actual contents of the web page being displayed, it is the verizon wireless rebate page:
'''www.verizonwireless.com/rebates'''
The page has definitely finished being rendered (the refresh icon is displayed after the url "woot"), but the URL does not match the page. The URL displayed is not even in its proper form (i.e., www.woot.com).
Remember that this page was RESTORED by Firefox from a previous session. It is as if I was on that tab at verizon, tried to go to woot.com by typing "woot" (which would of course bring up a search rather than the web page), DIDN'T PRESS ENTER, and Firefox is duplicating that entire sequence.
********* END PROBLEMATIC *************
chrome://foxtab/content/newTabMessage.html
https://www.bankofamerica.com/Control.do?page_msg=signoff&body=signoff
'''''Window 2:'''''
http://www.freewaregenius.com/2011/06/01/the-best-freeware-file-manager-a-comparative-analysis/
With this exact set of windows and tabs, as restored by Firefox in a brand new instance of it, double-clicking the red Firefox in the top left corner of the 2nd window causes both windows to close.
I wish I could save this configuration so I could always reproduce the error, but I need my computer :)

You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created

Error 0x80070057 when configuring Windows 7 Backup even after repair installation !

I've started getting Error 0x80070057 when trying to configure Windows 7 SP1 Backup "The parameter is incorrect".
Already did the following:
- http://support.microsoft.com/kb/982736/pl
- chkdsk c: /F /R (no errors)
- sfc /scannow (no errors)
- registry tweaks
- removing old registry backup entries
- moved partition to a different disk
- in-place repair install !!!
AND NOTHING !

Nothing wrong with sfc /scannow
Event viewer show such errors:
Błąd składnika Express Writer: nie można dodać składników Express Writer z katalogu System.
Operation:
   Initializing Writer
   Gathering Writer Data
   Executing Asynchronous Operation
Context:
   File Path: C:\windows\Vss\Writers\System\
   Execution Context: Requestor
   Current State: GatherWriterMetadata
Error-specific details:
   Error: FindFirstFile(C:\windows\Vss\Writers\System\*.xml), 0x80070002, The system cannot find the file specified.
Błąd Usługi kopiowania woluminów w tle: nieoczekiwany błąd podczas badania interfejsu IVssWriterCallback. hr = 0x80070005, Access is denied.
. To jest często spowodowane przez niepoprawne ustawienia zabezpieczeń w procesie zapisującym lub żądającym.
Operation:
   Gathering Writer Data
Context:
   Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Name: System Writer
   Writer Instance ID: {06036e1a-27d9-4b22-8aa2-1975e33169ca}
Błąd Usługi kopiowania woluminów w tle: nieoczekiwany błąd podczas wywoływania procedury RegSetValueExW(0x000001ec,SYSTEM\CurrentControlSet\Services\VSS\Diag\Registry Writer,0,REG_BINARY,000000000297EEB0.72). hr = 0x80070005, Access is denied.
Operation:
   BackupShutdown Event
Context:
   Execution Context: Writer
   Writer Class Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Name: Registry Writer
   Writer Instance ID: {232c094d-e556-42cc-9c03-4544badc76e0}
Błąd Usługi kopiowania woluminów w tle: nieoczekiwany błąd podczas wywoływania procedury RegSetValueExW(0x0000031c,SYSTEM\CurrentControlSet\Services\VSS\Diag\VssvcPublisher,0,REG_BINARY,00000000041EF220.72). hr = 0x80070005, Access is denied.
Błąd Usługi kopiowania woluminów w tle: nieoczekiwany błąd podczas wywoływania procedury RegSetValueExW(0x000001f4,SYSTEM\CurrentControlSet\Services\VSS\Diag\COM+ REGDB Writer,0,REG_BINARY,00000000017BF3E0.72). hr = 0x80070005, Access is denied.
Operation:
   BackupShutdown Event
Context:
   Execution Context: Writer
   Writer Class Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Name: COM+ REGDB Writer
   Writer Instance ID: {5f6f2b71-85e8-4f43-b3e2-667f1ea0daaf}

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

PDF Action configuration window is not opening

Hi ,
I am working on xMII 12.0.In the Logic editor PDF Action blocks when i click on configuration , window is not opening.But the Link editor is opening.It is only for PDF action blocks.can any one tell me the solution for this.
Thanks&Regards
Guru.

I have sorted it. I played about with the apps window and found that PDF files were listed seperately to other adobe types in the list.
With a bit of trial and error, I discovered that by setting the download window to open and save file in c:users/user/downloads, along with setting PDF files to 'always ask' in the apps tab - it worked again.
Still don't know how it managed to change itself in the first place though!

Configuring Windows with Afaria

Similar Messages

Maybe you are looking for