Configuring WL profile on 7925g phone

I am using template (which I just created) to configure wireless profile on 7925g phones. This template is saved on network share so all the techs can access it. Here is what I do now to configure WL on a 7925 phone---
-using usb cable, I plug-in the phone in my laptop
-go to web interface
-go to BackUp Settings
-type the encryption Key (in Backup settings menu)
-import template from network to my phone
-phone reboots
BUT, wireless connection on the phone doesn't work until I go back to web interface and re type the Pre-Shared Key again. Is there anyway to save this key in my template so I don't have to do this step over and over agin? Thanks

wireless connection on the phone doesn't work until I go back to web interface and re type the Pre-Shared Key again.
Hmmmmm ... Maybe something wrong with the firmware the phone is using? While you have the phone connected via USB cable, could you upgrade to, say 1.4(3) and later?

Similar Messages

Quick way to assign speed dials on 7925G phones?

Hi
We have 22 7925G phones and we need to assign the Zero through Nine keys on the keypad to be speed dials.
The phone will only allow me to add a speed dial for these keys which is part of the phones personal address book which is annoying considering we have a corporate address book.
Its not a good use of anybodies time to program in each entry into the Personal Address book on 22 phones and then setup the speed dials.
Surely there is a quicker way of doing this?
Thanks

Hi
Once the phone is on the network, browse to it's IP address.
Click Configurations/Phone Book. Default username and password are admin/Cisco
Configure the phone book.
Then on the left you can use the export/import functin to export it from this phone and load it into the other phones.
Aaron

Is there a "Configuration utility" for SE android phones?

Hi, I'm wondering If there Is an application similar to Apples "Iphone Configuration utility" for SE Android phones?
//Johan

http://support.apple.com/kb/DL926
It gives you the ability to craft configuration profiles (for mail, wlan and so on) and activate them on the phone via a PC or Mac. I work in a support enviroment and this would be a great app for us (remote to customers computer and use app to configure phone).

7925g phones static/hissing and roaming issues

Hello,
We've been having an issue for several months now with our over 200 7925g phones. Nurses are complaining that the phones have static and will drop the voice of the other caller and several times need to repeat the conversation. We have confirmed several scenario's. It occurs when both callers are on 7925g inside the coverage areas in the hospital; between 7925g and 7940 desk phone; 7925g and Nortel desk phone. We've tested on 802.11a and 802.11b/g. I do see a difference when on 802.11b/g however still get a hissing when connecting to a different AP.
4 - 4400 controllers, 6.0.202 firmware
1 - 5508 controller, 6.0.202 firmware
234 - LAP1131AG AP's
6 - AP1131AG AP's
7 - LAP1142N AP's
3 - LAP1310G AP's
AP's are on 6.0.202.0 firmware
7925g's all are on 1.3.3 firmware but we have a select few that we are testing at both hospitals with the newest firmware 1.4.1 and still same results.
235 - 7925g phones.
We have followed the 7925g setup & deployment guide, WLC Config Analyzer and made sure all checks were made. The only setting we plan on testing this week is changing the CCKM authentication change which was recommended. Currently we are WPA TKIP
We have disabled the higher rates (36-54) on the 802.11a.
We also have AirMagnet VoFi analyzer which is showing issues when roaming from AP. The alarms indicate a one-way audio issue and points to the AP's and phones power not matching. We have our Tx power level on the controller to automatic, Max Power Level at 30 dBm, Min. at -10 dBm, power Threshold at -70 (WLC Config Analyzer recommendation). The phone TX Power is set at 8 dBm. Call Power Save Mode has been tested with both None and U-APDS/PS-Poll.
We have a case open with Cisco TAC and she has requested debugs from our controllers. I have sent over 7 and she is not coming back with anything solid and not much help so far.
Our tests between 802.11a and 802.11b/g (RSSI setting on phone Auto-a and Auto-bg) have shown better with the bg mode but still static and/or hissing.
Any help would be greatly appreciated! Thanks.

Thanks!
We finally had an awesome Cisco Engineer on our SR. We straightened out the code and now have the correct 1.4.1.1.1.7 ES image and also configured CCKM.
We are currently testing with about 20 phones before we deploy it to over 200 phones.
Below are the steps we took and so far the tests have resolved the issue.
1. Downloaded & installed the 1.4.1.1.1.7 code on the 7925g's.
2. Changed the Scan Mode on the device in Call Manager to 'continuous'
3. On the Controllers, configured & implemented CCKM on the voice WLAN only.
4. Set the Radio Policy for the Voice WLAN to 802.11a only.
5. Only using channels 36, 40, 44, 48, 149, 153, 157, 161 on 802.11a
6. Disabled the 6,9,36,48 & 54 Mbps rates for 802.11a only
7. Configured the phone with the new voice SSID with CCKM, Security Mode as EAP-Fast, & 802.11 Mode = Auto-a.
We are following up with these test users next week so I will post if this fixes our issue.
Thanks for all the assistance everyone!

Configuration or profile not supported

I have a J2ME MIDlet that I want to download to a mobile phone.
I have created a JAR file and a JAD file. When I run the JAR file from my computer ( with the command: midp -classpath . Xdescriptor sso.jad ) everything works fine. But when I upload the JAD and JAR to my webserver, and run "midp -transient http://byfuglien.net/sso.jad" i get this error:
Error installing suite (40): Either the configuration or profile is not supported.
Does anybody have any idea what is wrong?

No, but maybe someone in the J2ME forum would know.

Error while configuring talent profile for ESS

Dear Experts
I am having following error while configuring talent profile for ESS:
The URL http://pplkhidr05.ppl.com.pk:8000/sap/bc/webdynpro/sap/hrtmc_employee_profile was not called due to an error.
Note
The following error text was processed in the system TRG : Access via 'NULL' object reference not possible.
The error occurred on the application server PPLKHIDR05_TRG_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: IWCI_HRTMC_TP_SHARED_DATA~GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: IWCI_IF_FPM_OIF_CONF_EXIT~OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IWCI_IF_FPM_FLOORPLAN_COMP~GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IF_FPM_FLOORPLAN~GET_UIBBS_FOR_EVENT of program CL_FPM_OIF_INTERNAL===========CP
Method: GET_NEXT_UIBBS of program CL_FPM========================CP
Method: PROCESS_EVENT of program CL_FPM========================CP
Method: RUN_EVENT_LOOP of program CL_FPM========================CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TRG in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PPLKHIDR05_TRG_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server PPLKHIDR05_TRG_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Any suggestions on how to resolve the error?
Regards
Imran

Imran,
check this thread
http://forums.sdn.sap.com/click.jspa?searchID=43957204&messageID=8996092
Thanks
Bala Duvvuri

Configuring optimizeit profiler for multiple kjs

Hi,
I am facing problems in configuring optimizeit profiler for multiple kjs. It
works fine if i have a single kjs in my app server and i am able to read the
profiler output. I am using iAS6.0sp2.
When i try to change the script that attaches the profiler with kjs for
multiple kjs all the kjs start on the same port i.e 10819. I want all the
kjs to start on different ports so that i can read the profiler output for
all of then at one go.
If any body has done this before with success then please help me at an
earlier date.
This is very very urgent for me.
sandhya

There is three things important While you working with custom member ship and FBA to work.
1. If you have developed Custom membership extending SQLServerMembership provider then make sure to check for Machine Key. as internally if usese combincation of this to encrypt password, so if you used first userid using some other method of creating user
then probably it does not use machine key in that configuration file.
2. if you doing brand new implementation from base classes you probably want to check your query & stored Procedure. make sure to run sql profiler to see what query is getting fired.
3. this one is most least and mostly not will be problem but do check Application Name,
Note: Key to get this working is Machine key, Application Name, your custom code revisit, sql profiler and you should be good,
Also do review FBA Code from CodePlex you can save significant time in developing from scratch.
-Samar
www.gosam.info
Please remember to click Mark as Answer on the answer if it helps you
Sr. Software engineer

Just bought a new iphone 4s 16gb my sim worked correctly after puting and old profile on the phone so I could get all the info now it says invalid sim what can I do o fix this?

just bought a new iphone 4s 16gb my sim worked correctly after puting and old profile on the phone so I could get all the info now it says invalid sim what can I do o fix this?

I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

HT201334 Apple configurator vs Profile Manager

I downloaded apple configurator and have it working. Then I realized profile manager in OSX Server does the same thing. What is the difference, can I leave it as is? Any benefit of just using profile manager?

Apple configurator has its uses.
Apple configurator can be used as a "manual" standalone solution to manage you iDevices and AppleTVs.
Apple configurator can be used in blended approach with Profile Manager.
With Profile Manager you can manage iDevices , Macs , and I believe AppleTv over the AIR.
- Apple Configure Stand Alone.
When using Apple Configurator by itself you can , lock down an iPad in a way you see fit.
1. You can make an iDevice in "Supervise Mode" increasing restricting of your iDevice , Profile Manager cannot do this at the moment , this feature will be available in Mavericks.
2. Any future configuration changes to your iDevices , must be physically plugged in everytime for those changes.
3. You can distribute free and paid apps.
4. You can update your IOS updates all at once. When IOS 7 comes out this fall you probably dont want to touch every iDevice and update 1 at a time. You can use Apple Configurator to download the latest IOS , and any IDevice that you plugin will receive the update, this means downloading th IOS update one time on the mac, and pushing it out to whoever needs it. Profile Manager can't do this.
5. You can name several iDevices sequently. If you have a cart of 30 it will be easy to rename your iDevices. Profile Manager can't do this.
6. Apple configurator allows you to "backup and restore" its not a true complete image but its close. Profile Manager does not do backups or restores.
7. Apple Configurator can be used to erase an iDevice.
8. I'm probably missing some more features.
- Profile Manager Stand Alone
1. You can manage Macs not just iDevices.
2. You must enroll the device before you can manage it, this can be done by pushing out an email , via a website etc.
3. Everything happens over the Air.
4. When enrolling , users can use their Open Directory or Active Directory ( if your Apple server is bound to AD server ). You can also create a generic account for enrolling purposes.
5. You can wipe devices over the air.
6. You can make pass code resets for iDevices.
7. You can manage users in groups , even nested groups. I manage staff and student iDevices. Our wireless system is seperated for staff and students each wireless has its own SSID. I created 2 upper level Profile Manager Groups , one called WiFi Student and one called WiFi Staff, all my student iDevice groups are nested under WiFi Student group and all my staff idevice groups are nested. This makes managing my wifi a breeze. I also include my mifi wireless info , in case i need a backup emergency wireless.
8. Im sure theres other features.
- Apple Configurator And Profile Manager Blended
1. Push out initial wifi settings. I setup a simple wireless router to connect my devices ( there are types when I setup over 50 ipads , and our network runs out of IPs)
2. You can use Apple Configurator to push out Profile Managers "enrollment profile" to many iDevices. You dont want to enroll a full iDevice cart one at a time via a web browser.
Maverick and IOS 7
In the fall everything will change , it is amazing what we will be able to do. Over the Air Supervise Mode , Install Apps over the air with no user interaction, App codes become licenses , which are revokeable and reusable. Out of the box enrollment ... There may be no need for Apple Configurator come this fall. So many things are changing I recommend watching the new WWDC2013 Videos, specially the one on device management.
Back to original topic.
I value both products , they have their specilties and when you blended , you can get things done efficiently.

Database Validation Failed error while configuring RDBMS profile for audit

Hi,
I am using Oracle Access Manager 10.1.4.3.0 with FMW 11g (Oracle internet Directory and Oracle Virtual Directory) on Linux X64.
While configuring RDBMS profile for OAM Auditing and reporting...
I am getting "Database Validation Failed" error both in Identity and Access servers
When I am looking in oblog...I got following in Identity..
2010/07/17@06:59:28.882658     17384     17422     CONNECTIVITY     DEBUG3     0x00000201     obmessagechannel.cpp:179     "Sending: "     seqno^13     opcode^8     pMsg^{25}st={5}ma=22{4}mi=2{4}sg=0{4}rt=0
2010/07/17@06:59:28.882704     17384     17422     NET     DEBUG3     0x00000201     obsocket.cpp:848     "ObSocketOIS::WriteFully"     _sock^19     LocalAddr^10.31.13.129     LocalPort^6022     RemoteAddr^10.31.13.134     RemotePort^41646
and in Access..
2010/07/17@06:39:09.391459     3326     3388     AUDIT     ERROR     0x00001D04     ../dbauditwriter.cpp:410     "The database audit writer was unable to perform the write"
2010/07/17@06:39:09.391491     3326     3388     AUDIT     WARNING     0x00001149     /usr/abuild/Oblix/10143hf/palantir/aaa_server/src/audit_handler.cpp:1119     ""Unable to write the audit record"
Kindly advice...

Hi.
Strange !
Check whether the RFC destiantion LCRSAPRFC is proper. Test the connection and Also check the exchange profile paramteres in the XI.
Also refer
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/6f1741b393f26fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f4/67b340be3dff5fe10000000a155106/frameset.htm
Also check what user is maintained via transaction SLDAPICUST. and carefully enter the password, also check that if user is locked.
Hope this will help you a bit.
Regards
Aashish Sinha

Trying to select a configuration and profile

We are developing open source car dash display for electric vehicle. The first release will be based on the Link 10 meter, displaying amps, volts, percent battery remaining etc.
I am having a bit of difficulty trying to select the appropriate configuration and profile. I have looked at CDLC/MIDP, CDC & PP as well as J2SE for embeded devices.
I don;t expect the GUI will require much beyond the capabilities of AWT.
suggestions?
thanks
d1

Are you currently syncing the iPod automatically where everything is synced onto it? If so, then simply update/sync the iPod and any new playlists you created will be added.
Or are you manually managing the iPod? If that is the case grab, drag & drop the new playlist onto the iPod in iTunes.
Or if you are already syncing selected playlist to the iPod, then you want to ADD that playlist to the list synced already.
If none of the above, please clarify.
Patrick

How do I configure roaming profiles to not apply to Domain Admins?

Hi,
I have a setup (Windows 2012 R2 on all servers) where roaming profiles and re-directed folders are applied through GPO to our RDS servers.
We decied to change this so only users, and not Domain Admins will have these settings applied.
Re-directed folders is a user setting, so that was changed easily, but the roaming profiles is applied to computer object.
So my question is; how do I configure roaming profiles only for some users (or a security group) and not for Domain Admins?
/KL_Dane
KL_Dane

Hi Dane,
>>So my question is; how do I configure roaming profiles only for some users (or a security group) and not for Domain Admins?
Sorry, this is not acheivable, for computer part policy settings apply to computer accounts, regardless of which user logs onto the computers.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

BB profile on two phones

I purchased a second Bold 9900 and gave my first one to my wife. I did the device switch to get all my stuff on my new Bold and it works fine. When I tried setting up my wife's 9900, it stopped me from loading a new BBM profile and will only use my BBM profile but when I accept my profile on her phone it removes it from my phone. I don't care if we share the BBM profile or if she uses her own, I just want her to be able to use her BBM which she cannot do right now without me losing mine.

Good deal, have a good day.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Configure Coverage Profile and other

I have question regarding coverage profile configuration.
- To configure coverage profile for safety stock, can I put it in decimal e.g. 1.5 days to cover safety stock level as it would impact the rest of production planning process?
Thank you very much.

Dear
Coverage Profile and Forecast profile are two different subject !
If it is range of coverage profile , then The range of coverage profile contains the parameters for calculating the dynamic safety stock. This is a statistical calculation on the basis of average daily requirements.With the dynamic safety stock, you can determine a safety stock based on requirements and range of coverage. The dynamic safety stock adapts automatically to the changed requirements and is fully available for planning purposes. You can limit the quantities used in the calculation of the dynamic safety stock by defining maximum and minimum ranges of coverage. You can also limit the period of time by defining different time periods in which the range of coverage is valid.
I hope you are asking about saferty caverage profile,,here basicalli we are setting the system to see how the safety stock is to be covered and calculated.See the help link below and come back if required
http://help.sap.com/saphelp_47x200/helpdata/en/f3/dbbb16b36111d1a6770000e83235d4/frameset.htm
https://wiki.sdn.sap.com/wiki/display/ERPLO/Dynamicsafetystock+calculation
Where as Forecasting Profile , please refer the below :
Profiles
One more query : Also the MRP type used here is a copy of the PD MRP type and not VV or VS.
I think you should use Forecast Base MRP type like VV rather PD.PD does not carry out any Forcasting Functionality .Please check wether you replicate PD from VV , then it is possible to execute Forecast specially Total Consumption set up in MRP type .
Hope this will be useful
Regards
JH

Configuring iPad Profiles from a PC Platform

How can I configure my iPads on a Windows system now that iPhone Configuration is no longer supported? Genius bar support told me to buy a mac. I need 2 profiles on these iPads for a school.We were using iPhone Configuration which worked with the PC platform, but the "genius bar" said it is no longer supported by Apple.

Perhaps you could try:
Meraki -- A free MDM   [ expect lots of email and phone calls about upgrades ]
   http://www.meraki.com/products/systems-manager/
   https://discussions.apple.com/thread/4067210?tstart=0
   Good howto by Sergio Sosa.
   https://discussions.apple.com/thread/2594001?start=15&tstart=0
MDM -- moble device management
MDMs
Airwatch, Meraki, MobileIron, Profile Manager on OS X Server, or Zenprise
For a comparison see this page:
http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
Airwatch
   http://www.air-watch.com/
MobileIron
   http://www.mobileiron.com/
Profile Manager by Apple
Zenprise
   http://www.zenprise.com/

Configuring WL profile on 7925g phone

Similar Messages

Maybe you are looking for