Configuring X Server with Linux RedHat 2.1 AS and EBS 11.5.9
Hi all,
I installed Oracle E-Business Suite 11.5.9 on Linux RedHat 2.1 Advanced Server.
I configured a VNC server and I added three lines in the service startup scripts:
DISPLAY="myhost:0.0"
export DISPLAY
xhost +myhost
These commands don't work and everytime I reboot the server I get the error:
Xlib: connection to "se:0.0" refused by server
Xlib: Client is not authorized to connect to Server
xhost: unable to open display "se:0.0"
But if I login in the KDE Session and then I type those 3 lines it works fine.
It seems to me like any service didn't start up until i logged in.
Please could anyone help me?
Thanks in advance
Hi Hussein,
Thanks for your prompt response.
as per the note id Oracle Applications Release 11i with Oracle 11g Release 1 (11.1.0) [ID 452783.1]
Oracle E-Business Suite 11.5.10 CU2 minimum version for 11g. and we are on 11.5.9 base.
do i need to follow the ID 735276.1 as per the note id Interoperability Notes E-Business Suite R12 with Oracle Database 11gR1 (11.1.0) only?
as per the note id 735276.1 my steps would be
1. Apply patch 6400501
2. deregister the current database
3. update the context file
4. oracle_home 11.1.0.7 already installed from 12.1.1 tech stack.
5. create sysaux tablespace in existing database.
6. upgrade the database using dbua.
7. apply the necessary patches as per the note id.
If i'm missing any steps from above, kindly suggest it.
Thanks,
Vihang
Similar Messages
-
Installation Iplanet 4.1 Enterprise Web Server on Linux RedHat 7.1
I am trying to install IPlanet 4.1 Enterprise Web Server on Linux RedHat 7.1.
After unloading the software from CDROM to a temp directory, and run ./setup, I get the following error:
eroor while loading shared libraries; libncurses.so.4: cannot load shared object file : no such file or directory.
Has anyone know how to resolve it??. Thanks.
regards,
Benny TanI have answered for this topic previously for another thread. Please follow the URL to see the answer.
http://forum.java.sun.com/thread.jsp?thread=257294&forum=14&message=968185 -
How to configure portal server with the Backend Oracle database
Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************ -
Configuring Radius server with Cisco MDS - 9606 switch
Need help in configuring Radius server with cisco MDS - 9606
please let me know if any document availablertt min/avg/max/mdev = 0.260/0.327/0.468/0.077 ms
IFCBCCEMCSW2# sh version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
Software
BIOS: version 1.1.0
loader: version 1.2(2)
kickstart: version 3.3(1c)
system: version 3.3(1c)
BIOS compile time: 10/24/03
kickstart image file is: bootflash:/m9500-sf1ek9-kickstart-mz.3.3.1c.bin
kickstart compile time: 5/23/2008 19:00:00 [06/19/2008 23:56:56]
system image file is: bootflash:/m9500-sf1ek9-mz.3.3.1c.bin
system compile time: 5/23/2008 19:00:00 [06/20/2008 00:26:51]
Hardware
cisco MDS 9506 ("Supervisor/Fabric-1")
Intel(R) Pentium(R) III CPU with 1028596 kB of memory.
Processor Board ID JAB094300ER
bootflash: 250368 kB
slot0: 0 kB -
Is it possible to have a server with both a 2007 DP role and 2012 DP role?
Is it possible to have a server with both a 2007 DP role and 2012 DP?
A client has been sold that as part of the migration the vendor will continue use the existing 2007 servers as DPs, and add the 2012 DP role as part of the migration - then at some future point remove the 2007 role.
Sounds a bit wonky to me, it would be great to have your insights, some MS documentation or case study - to either provide a level of comfort or give me some foundation to chime in and request they adjust their expectations... I haven't found anything yet.
It's not side by side technically, more of concurrent migration?
Thank's for your insights.Shared DPs are available if you are performing a migration but that's about it.
https://social.technet.microsoft.com/Forums/en-US/5185f83d-af0b-47a2-a6e9-5940a2cef7e2/can-sccm-2012-dp-and-sccm-2007-distribution-point-share-a-server-without-migrating?forum=configmanagergeneral
http://windowsitpro.com/system-center/q-can-i-share-distribution-point-between-configuration-manager-2007-and-configuration-
http://blogs.technet.com/b/system_center_in_action/archive/2012/04/26/distribution-point-migration-from-configuration-manager-2007-using-the-migration-feature-of-system-center-2012-configuration-manager.aspx
-Nick O. -
Compatibility with Linux RedHat
Hi All,
Does anyone have any experience in running JRockit 8.1 under recent versions of
RedHat Linux 8 or 9? I'm getting incompatibility errors (SO libraries, for example
pthread.so) right away after trying to start JRockit 8.1. I found a workaround
with alternavive /lib but this doesn't seem to be a good option. Besides, JVM
crashes every now and then. Is there any JRockit relerase compatible with RH9
at all?
Thanks,
Michael
[email protected]Sorry, the only RedHat version that JRockit officially supports and is
certified with is RedHat Advanced Server 2.1. JRockit might work well
with other RedHat versions but there are no guarantees.
/Helena
Michael Pastushkov wrote:
Hi All,
Does anyone have any experience in running JRockit 8.1 under recent versions of
RedHat Linux 8 or 9? I'm getting incompatibility errors (SO libraries, for example
pthread.so) right away after trying to start JRockit 8.1. I found a workaround
with alternavive /lib but this doesn't seem to be a good option. Besides, JVM
crashes every now and then. Is there any JRockit relerase compatible with RH9
at all?
Thanks,
Michael
[email protected] -
Configure content server with DMS
i have a content server setup by BASIS team , i need to use this server as a storage category for DMS to store Documents on it .
what is the required configurations to integrate the content server with DMS .Dear Reda,
for this information please see the online documentation at
Knowledge Provider (BC-SRV-KPR) - SAP Library
SAP Library - SAP Content Server
I hope that this could answer your questions and help your basis team.
Regards,
Christoph -
Howto install SAP NW Windows Server with Linux Oracle 11g?
Hi !!!
In this moment i want to install a SAP Netweaver PI, but the client already has a linux database server with oracle.
I read the MasterGuide but i cannot find the section or similar situation.
Scenario
WK8-PI
192.168.1.100
Admin y passwd
Linux-Oracle
192.168.1.77
port: 3355
user y passwd
how to install SAP NW?
LevyHi!!!
i read the instruction with Distribution System, and continue the steps, but the time to choose SAP System Database i cannot write the linux server always show me the Windows Server, and i can write the unique field is the instance. After push the next button and send me error, not install oracle database.
thanks
Levy Gonzalez -
Install Oracle 10g with linux redhat 4
Hi,
i need some documentation for installation of Redhat 4 with oracle 10g.
how can install linux redhat 4 if anyone know documentation please share with me.Hi,
If you need video tutorial, please refer to: http://kamranagayev.wordpress.com/2010/04/25/video-tutorial-installing-oel-and-oracle-10gr2/
And you can check: Installing Centos (based on Redhat, same as redhat) : http://kamranagayev.wordpress.com/2009/01/05/installing-centos-on-vmware-step-by-step/
Installing Oracle on it: http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/ -
How to configure UDDI Server with in EDK with a 4.5WS?
I'm trying to develop a crawler service using EDK5.0.1 with a 4.5ws portal.
To do this job, I have to deploy and coufigure a UDDI Server which is a requirement for services in 4.5ws.
After develping and deploying a crawler service, I created gadget server in the 4.5ws portal, and tried to add remote data source, but the popup window for datasource seems not to be able to find the crawler service and showed 'Empty Gadget Server'.
I think I set up the uddi server with a wrong way, but I don't know what I have to do more to set a uddi server.
Actually, after developing crawler service and sci service, I deployed these with DeployServlet which is a deploy toolkit offered by EDK.
With this deploying result, I modified the uddi.xml file and put that file into c:\program files\Plumtree\ptedk\5.0\devkit\config\java\uddi folder.
Is there any things to set for uddi server?
Can anybody provide me any advise on this?
Any help would be appricated.The UDDI is used with web services in 4.5x. This is best described as a phone book of URLS for any web services installed in that machine. Those URLS will then point to the individual web services.
In 5.0 the UDDI server is not needed since it is replaced with the "Remote Server" and "Web Services" tabs. HOw to setup a UDDI with TOMCAT
UDDI can be setup to run with TOMCAT and I believe this is the only one provided in the EDK installer in the ptedk\5.0\devkit\java directory
Here's a little TOMCAT information. Web applications are deployed in a folder called "webapp". This case, we have a uddi server installed and it's in a folder called "uddi". So, our file structure for the UDDI server looks like: /webapp - tomcats web application folder /uddi - the uddi application /WEB-INF - standard WEB-INF directory stores java classes, jars and any descriptor files. server-config.wsdd - this is the web service descriptor file for this uddi server - provided by plumtree web.xml - this is the web.xml descriptor file for how the web services in this application will be loaded and run - provided by plumtree /lib - contains the jar files for the uddi server - provided by plumtree The server-config.wsdd file should be the only item that the user needs to modify. Within the file (XML based), there should be the following tag: <!--service for uddi server--> <service name="MessageService" provider="java:MSG" style="message"> <parameter name="allowedMethods" value="find_tModel find_business find_binding"/> <parameter name="className" value="com.plumtree.remote.uddi.UDDIServer"/> <!-- enter the base url for your services. The individual urls will be appended to this url--> <parameter name="baseUrl" value="http://rickc-loaner:81/ntcws/"/> <!-- Enter true if this is dotnet, leave at false if the service is java--> <parameter name="isDotNet" value="true"/> <!-- enter only the urls and names required for your service. For a java crawl, this would be crawler name, documentProviderRpc, containerProviderRpc, sciDataSourceRpc, sciCrawlRpc, and sciCardRpc if using remote card submission--> <!-- Enter the crawler name. This is the name that will show when expanding the remote server--> <parameter name="crawlerName" value="NT File CWS"/> <!-- Enter the auth name. This is the name that will show when expanding the remote server--> <parameter name="authName" value=""/> <!-- Enter the relative url to the rpc (Java) document provider soap endpoint --> <parameter name="documentProviderRpc" value="DocumentProviderSoapPort"/> <!-- Enter the relative url to the rpc (Java) container provider soap endpoint --> <parameter name="containerProviderRpc" value="ContainerProviderSoapPort"/> <!--sci values: the url for datasource, crawl and card may be the same--> <!-- Enter the relative url to the rpc (Java) sci data source soap endpoint --> <parameter name="sciDataSourceRpc" value="SciSoapPort"/> <!-- Enter the relative url to the rpc (Java) sci crawl soap endpoint --> <parameter name="sciCrawlRpc" value="SciSoapPort"/> <!-- Enter the relative url to the rpc (Java) sci card soap endpoint --> <parameter name="sciCardRpc" value=""/> <!-- note that relative auth only works in rpc for 4.5--> <!-- Enter the url to the auth provider soap endpoint --> <parameter name="authProvider" value=""/> <!-- Enter the relative url to the sync provider soap endpoint --> <parameter name="syncProvider" value=""/> <!-- Enter the relative url to the auth sci (rap) soap endpoint --> <parameter name="authSci" value=""/> <!-- Enter the relative url to the doclit (.NET) document provider soap endpoint --> <parameter name="documentProviderDoclit" value="documentprovidersoapbinding.asmx"/> <!-- Enter the relative url to the doclit (.NET) container provider soap endpoint --> <parameter name="containerProviderDoclit" value="containerprovidersoapbinding.asmx"/> <!--sci values: the url for datasource, crawl and card may be the same--> <!-- Enter the relative url to the doclit (.NET) sci data source soap endpoint --> <parameter name="sciDataSourceDoclit" value="xuiservice.asmx"/> <!-- Enter the relative url to the doclit (.NET) sci crawl soap endpoint --> <parameter name="sciCrawlDoclit" value="xuiservice.asmx"/> <!-- Enter the relative url to the doclit (.NET) sci card soap endpoint --> <parameter name="sciCardDoclit" value="xuiservice.asmx"/> </service> This tag contains the information that will be specific to the user's deployment of the web service (CWS or AWS).First off: <parameter name="baseUrl" value="http://machinename:81/ntcws/"/>
This is the location of the web server that has the target web service installed. THIS CANNOT BE "localhost". This has to be a resolvable machine name or IP address. In 5.0 this is the Remote Web Service settings. Second, you need to set the type of web service. <!-- Enter true if this is dotnet, leave at false if the service is java--> <parameter name="isDotNet" value="true"/> If your app server hosting the web service is dotnet, you need to set this to "true". This is equivalent to the Document encoding setting in 5.0. .NET supports Document/Literal incoding instead of RPC for Java. Third, name your web services. This is the name that will display in the drop down list in 4.5WS when you decide to create a remote data source. <!-- Enter the crawler name. This is the name that will show when expanding the remote server--> <parameter name="crawlerName" value="NT File CWS"/> <!-- Enter the auth name. This is the name that will show when expanding the remote server--> <parameter name="authName" value=""/> This is the web service name property when you create a new web service in 5.0. Next are the configuration settings for your particular web service: <!-- Enter the relative url to the rpc (Java) document provider soap endpoint --> <parameter name="documentProviderRpc" value="DocumentProviderSoapPort"/> <!-- Enter the relative url to the rpc (Java) container provider soap endpoint --> <parameter name="containerProviderRpc" value="ContainerProviderSoapPort"/> <!--sci values: the url for datasource, crawl and card may be the same--> <!-- Enter the relative url to the rpc (Java) sci data source soap endpoint --> <parameter name="sciDataSourceRpc" value="SciSoapPort"/> <!-- Enter the relative url to the rpc (Java) sci crawl soap endpoint --> <parameter name="sciCrawlRpc" value="SciSoapPort"/> <!-- Enter the relative url to the rpc (Java) sci card soap endpoint --> <parameter name="sciCardRpc" value=""/> <!-- note that relative auth only works in rpc for 4.5--> <!-- Enter the url to the auth provider soap endpoint --> <parameter name="authProvider" value=""/> <!-- Enter the relative url to the sync provider soap endpoint --> <parameter name="syncProvider" value=""/> <!-- Enter the relative url to the auth sci (rap) soap endpoint --> <parameter name="authSci" value=""/> <!-- Enter the relative url to the doclit (.NET) document provider soap endpoint --> <parameter name="documentProviderDoclit" value="documentprovidersoapbinding.asmx"/> <!-- Enter the relative url to the doclit (.NET) container provider soap endpoint --> <parameter name="containerProviderDoclit" value="containerprovidersoapbinding.asmx"/> <!--sci values: the url for datasource, crawl and card may be the same--> <!-- Enter the relative url to the doclit (.NET) sci data source soap endpoint --> <parameter name="sciDataSourceDoclit" value="xuiservice.asmx"/> <!-- Enter the relative url to the doclit (.NET) sci crawl soap endpoint --> <parameter name="sciCrawlDoclit" value="xuiservice.asmx"/> <!-- Enter the relative url to the doclit (.NET) sci card soap endpoint --> <parameter name="sciCardDoclit" value="xuiservice.asmx"/> These are equivalent to setting the Document provider URL, Container Provider URL, Remote UI URL etc etc that are in 5.0 web services settings. Once you have installed the UDDI server, and started TOMCAT, you should be able to hit the services list at:http://machinewithuddi:8080/uddi/services This will become your Remote Gadget Server URL and you should be good to go!! -
How to configure Content server with Oracle Portal
I am working on oracle portal using JDeveloper 11.1.1.5.0. I need to configure Content server to work with UCM. Which content server version should i use and what basic steps required to configure it.
OS environment is Windows XP SP3.
Database server is Oracle 10gR2Hi
"I need to configure Content server to work with UCM." - I am not clear on this .
UCM is content server .
Now if you are looking to have UCM contents rendered on Oracle Portal then you will need to use Content Portlet Suite .
Hope this helps .
Thanks
Srinath -
How to configure PHP Server with Flex
Hello everyone,
I am trying to create new flex application with PHP as server option.
but on the Configure PHP server window it gives error as
" You must enter a valid root URL."
I am usingh xampp as php server, and i have changed the port no of apache to 90.
so my web root is //localhost:90
\xampp\htdocs\phpProject-debug
Can anyone help me to configure the PHP server with Flash builder 4
I am not using Zend server...Hello Rupesh,
You need to specify full url like this "http://localhost:90/" and need to start server before validating.
This check may be missed by you.
Thanks,
Vikram -
Setting up FMS on a remote server with Linux platform
Can anybody help me with setting up FMS on a remote server
that runs linux?First of all you must download linux distribution of fms with
wget url.
Than
tar -zxvf FlashMediaServer2.tar.gz
This will create a directory which contains the installation
files.
cd into newly created directory something like
cd FMS_2_0_3_r68_linux
you will see an executable file named installFMS in the dir
if you list the files with ls.
just type ./installFMS and press enter.
You should be able to set it up without problem if you
officially set it up on linux platforms which are described on its
help page but you must use -platformWarnOnly parameter to start if
you want to set it up on a platform orther than support list.
it will ask you some questions which you must answer
appropriately.
it will install itself into /opt/macromedia/fms and you will
be able to manage the service by /etc/init.d/fms.
you can check the service if it has started succesfully by
running
ps aux|grep fms
or
netstat -aln|grep 1935
there should be a running process named fms
or
the port 1935 should be listenning on some interfaces
if you don't see any of them than service might not be
started succesfully.
You may try to start the service manually by typing
/etc/init.d/fms start
if you can't start it again
cd /opt/macromedia/fms/
and run
./server start
you should see some complaints about some packages needed
such as netscape libraries or ulimit problem
if you see problem about ulimit than change your ulimit to
32768
ulimit -u 32768
Please do all of the aboves with your attention. -
Oracle workflow server with linux
In "10g Release 1 (10.1.0.4) Patch Set 2 for Linux x86 Patch Set Notes", it is mentioned that modplsql is not currently supported on Red Hat Enterprise Linux 4. For this reason, HTML DB and Oracle Workflow are not currently supported on Red Hat Enterprise Linux 4.
Does this mean that workflow monitor cannot be used? Or workflow server itself cannot be used in Linux?
Is there any workaround for this problem? If I want to abort a process flow execution, is there a way to do it without using workflow monitor? In one of the other postings I saw a reference to abort method of workflow engine but this package does not seem to exist in the workflow server recent versions.
Thanks,Hi,
The modpl/sql requirement will stop you being able to use the Workflow monitor, but the core functionality of the module will remain unaffected.
To abort a process, the WF_ENGINE package should have a procedure called AbortProcess - I haven't got a Linux installation to check on at the moment, but I;d be surprised if they have removed it, since this is used in a number of processes.
HTH,
Matt
Alpha review chapters from my book "Developing With Oracle Workflow" are available on my website:
http://www.workflowfaq.com
http://forum.workflowfaq.com -
Help Configuring PHP Server with new Flex project.
Hi,
I'm curious if someone can help me with a frustrating problem.
While creating a new flex project, I can't seem to validate the configuration of the php server. I keep getting the message: "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
I'm running MySQL, PHP and Apache 2.2. These program have worked indepentally without flex, so I know the program isn't with the install of the stack.
For my web root I entered: "C:\Program Files\Apache Software Foundation\Apache2.2\htdocs" the location where I installed Apache
And for root url I'm using "http://localhost"
The other wierd part of this is that even though Flex would not validate this connection, I went ahead and started the project anyway and made a succesful connection to mysql, obviously though when I tried to launch the project it couldn't connect to the server.
Any suggestions would be much appreciated because flex is pretty much useless to me unless I can figure out how to connect with php and mysql.
Stevehey ya
you were responding to like a real old post
what exactly is your problem perhaps i can help
Maybe you are looking for
-
Hello, We have been Verizon customers for many years and typically enjoy the product and service. However, this last upgrade we had a horrendous experience as a result of poor training by staff at the Avon, CT store. We both upgraded our phones to
-
The hard drive on my 12" powerbook g4 is failing and I need to do an emergency backup. I've pulled all the important data off and now I'd like to make a disk image backup so that I don't lose my preferences, fonts, etc, etc. I'd thought to do this by
-
Use TREX Search outside portal
Hi, Our situation: 1.We have our intranet indexed with Autonomy search engine; 2.We have TREX installed and we have SAP EP7.0 3.We have our intranet also indexed by TREX in our SAP portal (using Web Repository in KM). Now we would like to replace Aut
-
AE WON'T OPEN AT STARTUP - mixed errors
I've looked at a previous discussion about graphic cards' issues with AE CS6, but I can't get rid of this error. When I launch AE CS6 11.0.2 I receive an error regarding the dynamiclink manager and AE crashes. If I hit the reopen button then I get th
-
Hi Is there any way to get a reminder of your BT Internet email address so that you can log into BT Wifi hotspots? I've previously been able to login to BT Wifi app on iOS using bt/[email protected], but I've NEVER been able to connect to a BT hotspo